Rust support for powerpc
Subsystems (3)
v9 cover Rust support for powerpc
Enable experimental rust support for ppc64le and ppc32be. The patch for ppc32 has been provided by Link Mauve[1] and ppc64le support[2] has been merged over it. ppc32 needs some toolchain fixes mentioned in the patch rust: Add PowerPC support and the discussion for that is done here[1].
This has been tested on
- powernv9 hardware
- pseries P11 hardware
- pseries(9, 10) qemu
- powernv(9, 10) qemu
- rustdoc on x86 and powerpc64le
- rusttest on x86 and powerpc64le
We are actively working with our LLVM team to get the target for ppc, ppc64 and ppc64le in the rust compiler.
[1] https://lore.kernel.org/all/[email protected]
[2] https://lore.kernel.org/all/[email protected]
Changelog:
V8 -> V9:
- rust/Makefile updated with a directory instead of abspath
V8: https://lore.kernel.org/all/[email protected]/
V7 -> V8:
- rust/Makefile updated to separate host libraries from target
V7: https://lore.kernel.org/all/[email protected]/
Changelog:
V6 -> V7:
- Documentation removed as powerpc is still under development
- Added a fix for race condition in rust/Makefile
V6: https://lore.kernel.org/all/[email protected]
V5 -> V6:
- Added a missing Tested by from Venkat which got missed since V3
- Support is marked as Maintained instead of experimental
V5: https://lore.kernel.org/all/[email protected]
V4 -> V5:
- Removed a nested ifdef from PPC64 for Little endian toolchain
V4: https://lore.kernel.org/all/[email protected]
V3 -> V4:
- Co-developed-by header added in patch 1
V3: https://lore.kernel.org/all/[email protected]
V2 -> V3:
- Splited HAVE_RUST in 2 lines
- BINDGEN_TARGET_powerpc initialized before assigning the same to BINDGEN_TARGET
V2: https://lore.kernel.org/all/[email protected]
V1 -> V2:
- jump label fix for rust has been moved to a separate patch
- PPC32 support has been taken
- rust support has been marked experimental
- target.json dependency has been removed
- HAVE_RUST now depends on CPU_LITTLE_ENDIAN for PPC64
Link Mauve (1):
rust: Add PowerPC support
Mukesh Kumar Chaurasiya (IBM) (3):
rust: Fix "multiple candidates for rmeta dependency core" error powerpc/jump_label: adjust inline asm to be consistent
powerpc: Enable Rust for ppc64le
arch/powerpc/Kconfig | 2 + arch/powerpc/Makefile | 7 +++ arch/powerpc/include/asm/jump_label.h | 23 ++++++---- rust/Makefile | 66 +++++++++++++++++---------- 4 files changed, 65 insertions(+), 33 deletions(-)
Signature · 1 line
2.53.0
PATCH v9 1/4 rust: Fix "multiple candidates for rmeta dependency core" error
When building Rust code with LLVM=1 with -j1, rustc was encountering an error:
"multiple candidates for rmeta dependency core found", with two candidates:
1. The host's standard library from the rustup toolchain
2. The kernel's custom libcore.rmeta in the rust/ directory
This occurred because the build system was using -L$(objtree)/rust for host library builds (proc_macro2, quote, syn), which caused rustc to search the rust/ directory. During this search, rustc would find both the kernel's custom libcore.rmeta and gain access to the host's standard library, creating a conflict.
The solution is to separate host libraries into a dedicated rust/host/ subdirectory and use -L$(objtree)/rust/host for host builds instead of -L$(objtree)/rust. This ensures that:
1. Host library builds (proc_macro2, quote, syn) only search rust/host/ and never encounter the kernel's libcore.rmeta
2. Proc macro builds use -L$(objtree)/rust/host to find their dependencies
Special handling is added for rustdoc-pin_init, which is a host build (to access the alloc crate) but depends on proc macros from the main rust/ directory. It uses explicit --extern paths with absolute paths to reference the proc macros without adding -L$(objtree)/rust, which would reintroduce the conflict.
The rust/host/ directory is added to clean-files to ensure it's removed during make clean.
As there is a lot going on, here's a summary of changes:
- Add clean-files := host/ to clean the generated directory
- Change host library targets from lib*.rlib to host/lib*.rlib
- Update cmd_rustc_procmacrolibrary to create host/ directory
- Update cmd_rustc_procmacro to use -L$(objtree)/rust/host
- Update cmd_rustdoc to use -L$(objtree)/rust/host for host builds
- Update rustdoc-pin_init to use explicit --extern paths for proc macros as pin-init also needs alloc crate from -L$(objtree)/rust. So the proc macros needs an absolute path
--- rust/Makefile | 57 +++++++++++++++++++++++++++++++-------------------- 1 file changed, 35 insertions(+), 22 deletions(-)
rust/Makefile +35 -22
@@ -3,6 +3,9 @@ # Where to place rustdoc generated documentation rustdoc_output := $(objtree)/Documentation/output/rust/rustdoc +# Clean generated host directory +clean-files := host/ + obj-$(CONFIG_RUST) += core.o compiler_builtins.o ffi.o always-$(CONFIG_RUST) += exports_core_generated.h
@@ -27,7 +30,7 @@ endif obj-$(CONFIG_RUST) += exports.o -always-$(CONFIG_RUST) += libproc_macro2.rlib libquote.rlib libsyn.rlib +always-$(CONFIG_RUST) += host/libproc_macro2.rlib host/libquote.rlib host/libsyn.rlib always-$(CONFIG_RUST_KERNEL_DOCTESTS) += doctests_kernel_generated.rs always-$(CONFIG_RUST_KERNEL_DOCTESTS) += doctests_kernel_generated_kunit.c
@@ -150,7 +153,7 @@ quiet_cmd_rustdoc = RUSTDOC $(if $(rustdoc_host),H, ) $< OBJTREE=$(abspath $(objtree)) \ $(RUSTDOC) $(filter-out $(skip_flags) --remap-path-prefix=% --remap-path-scope=%, \ $(if $(rustdoc_host),$(rust_common_flags),$(rust_flags))) \ - $(rustc_target_flags) -L$(objtree)/$(obj) \ + $(rustc_target_flags) -L$(objtree)/$(obj)$(if $(rustdoc_host),/host) \ -Zunstable-options --generate-link-to-definition \ --output $(rustdoc_output) \ --crate-name $(subst rustdoc-,,$@) \
@@ -193,13 +196,15 @@ rustdoc-proc_macro2: $(src)/proc-macro2/lib.rs rustdoc-clean FORCE +$(call if_changed,rustdoc) rustdoc-quote: private rustdoc_host = yes -rustdoc-quote: private rustc_target_flags = $(quote-flags) +rustdoc-quote: private rustc_target_flags = $(quote-flags) \ + --extern proc_macro2 rustdoc-quote: private skip_flags = $(quote-skip_flags) rustdoc-quote: $(src)/quote/lib.rs rustdoc-clean rustdoc-proc_macro2 FORCE +$(call if_changed,rustdoc) rustdoc-syn: private rustdoc_host = yes -rustdoc-syn: private rustc_target_flags = $(syn-flags) +rustdoc-syn: private rustc_target_flags = $(syn-flags) \ + --extern proc_macro2 --extern quote rustdoc-syn: $(src)/syn/lib.rs rustdoc-clean rustdoc-quote FORCE +$(call if_changed,rustdoc)
@@ -236,7 +241,10 @@ rustdoc-pin_init_internal: $(src)/pin-init/internal/src/lib.rs \ +$(call if_changed,rustdoc) rustdoc-pin_init: private rustdoc_host = yes -rustdoc-pin_init: private rustc_target_flags = $(pin_init-flags) \ +rustdoc-pin_init: private rustc_target_flags = \ + --extern pin_init_internal=$(abspath $(objtree)/$(obj)/$(libpin_init_internal_name)) \ + --extern macros=$(abspath $(objtree)/$(obj)/$(libmacros_name)) \ + $(call cfgs-to-flags,$(pin_init-cfgs)) \ --extern alloc --cfg feature=\"alloc\" rustdoc-pin_init: $(src)/pin-init/src/lib.rs rustdoc-pin_init_internal \ rustdoc-macros FORCE
@@ -525,48 +533,53 @@ $(obj)/exports_kernel_generated.h: $(obj)/kernel.o FORCE quiet_cmd_rustc_procmacrolibrary = $(RUSTC_OR_CLIPPY_QUIET) PL $@ cmd_rustc_procmacrolibrary = \ + mkdir -p $(dir $@); \ $(if $(skip_clippy),$(RUSTC),$(RUSTC_OR_CLIPPY)) \ $(filter-out $(skip_flags),$(rust_common_flags) $(rustc_target_flags)) \ --emit=dep-info=$(depfile) --emit=link=$@ --crate-type rlib -O \ - --out-dir $(objtree)/$(obj) -L$(objtree)/$(obj) \ --crate-name $(patsubst lib%.rlib,%,$(notdir $@)) $< -$(obj)/libproc_macro2.rlib: private skip_clippy = 1 -$(obj)/libproc_macro2.rlib: private rustc_target_flags = $(proc_macro2-flags) -$(obj)/libproc_macro2.rlib: $(src)/proc-macro2/lib.rs FORCE +$(obj)/host/libproc_macro2.rlib: private skip_clippy = 1 +$(obj)/host/libproc_macro2.rlib: private rustc_target_flags = $(proc_macro2-flags) +$(obj)/host/libproc_macro2.rlib: $(src)/proc-macro2/lib.rs FORCE +$(call if_changed_dep,rustc_procmacrolibrary) -$(obj)/libquote.rlib: private skip_clippy = 1 -$(obj)/libquote.rlib: private skip_flags = $(quote-skip_flags) -$(obj)/libquote.rlib: private rustc_target_flags = $(quote-flags) -$(obj)/libquote.rlib: $(src)/quote/lib.rs $(obj)/libproc_macro2.rlib FORCE +$(obj)/host/libquote.rlib: private skip_clippy = 1 +$(obj)/host/libquote.rlib: private skip_flags = $(quote-skip_flags) +$(obj)/host/libquote.rlib: private rustc_target_flags = $(quote-flags) \ + -L$(objtree)/$(obj)/host --extern proc_macro2 +$(obj)/host/libquote.rlib: $(src)/quote/lib.rs $(obj)/host/libproc_macro2.rlib FORCE +$(call if_changed_dep,rustc_procmacrolibrary) -$(obj)/libsyn.rlib: private skip_clippy = 1 -$(obj)/libsyn.rlib: private rustc_target_flags = $(syn-flags) -$(obj)/libsyn.rlib: $(src)/syn/lib.rs $(obj)/libquote.rlib FORCE +$(obj)/host/libsyn.rlib: private skip_clippy = 1 +$(obj)/host/libsyn.rlib: private rustc_target_flags = $(syn-flags) \ + -L$(objtree)/$(obj)/host --extern proc_macro2 --extern quote +$(obj)/host/libsyn.rlib: $(src)/syn/lib.rs $(obj)/host/libquote.rlib FORCE +$(call if_changed_dep,rustc_procmacrolibrary) quiet_cmd_rustc_procmacro = $(RUSTC_OR_CLIPPY_QUIET) P $@ cmd_rustc_procmacro = \ - $(RUSTC_OR_CLIPPY) $(rust_common_flags) $(rustc_target_flags) \ + $(RUSTC_OR_CLIPPY) $(rust_common_flags) \ -Clinker-flavor=gcc -Clinker=$(HOSTCC) \ -Clink-args='$(call escsq,$(KBUILD_PROCMACROLDFLAGS))' \ --emit=dep-info=$(depfile) --emit=link=$@ --extern proc_macro \ - --crate-type proc-macro -L$(objtree)/$(obj) \ + --crate-type proc-macro \ + -L$(objtree)/$(obj)/host \ --crate-name $(patsubst lib%.$(libmacros_extension),%,$(notdir $@)) \ - @$(objtree)/include/generated/rustc_cfg $< + @$(objtree)/include/generated/rustc_cfg \ + $(rustc_target_flags) \ + $< # Procedural macros can only be used with the `rustc` that compiled it. $(obj)/$(libmacros_name): private rustc_target_flags = \ --extern proc_macro2 --extern quote --extern syn -$(obj)/$(libmacros_name): $(src)/macros/lib.rs $(obj)/libproc_macro2.rlib \ - $(obj)/libquote.rlib $(obj)/libsyn.rlib FORCE +$(obj)/$(libmacros_name): $(src)/macros/lib.rs $(obj)/host/libproc_macro2.rlib \ + $(obj)/host/libquote.rlib $(obj)/host/libsyn.rlib FORCE +$(call if_changed_dep,rustc_procmacro) $(obj)/$(libpin_init_internal_name): private rustc_target_flags = $(pin_init_internal-flags) $(obj)/$(libpin_init_internal_name): $(src)/pin-init/internal/src/lib.rs \ - $(obj)/libproc_macro2.rlib $(obj)/libquote.rlib $(obj)/libsyn.rlib FORCE + $(obj)/host/libproc_macro2.rlib $(obj)/host/libquote.rlib $(obj)/host/libsyn.rlib FORCE +$(call if_changed_dep,rustc_procmacro) # `rustc` requires `-Zunstable-options` to use custom target specifications
Signature · 1 line
2.53.0
Re: [PATCH V9 1/4] rust: Fix "multiple candidates for rmeta dependency core" error
Quoted 7 lines · Mukesh Kumar Chaurasiya (IBM)
When building Rust code with LLVM=1 with -j1, rustc was encountering an error:
"multiple candidates forrmetadependencycorefound", with two candidates:
1. The host's standard library from the rustup toolchain
2. The kernel's custom libcore.rmeta in therust/directory
Please clarify in what conditions this happens, e.g. when building natively in an architecture like powerpc for which the target (...)
Otherwise, it sounds like this is something that would be happening to essentially everyone just by building with -j1, which is not the case.
Also, since you may need to reword a bit, please take the chance to use the present tense to describe the current state, and then the imperative for what is changed. (The past is usually used for something that already changed in the past, not for something that still happens before the patch is applied -- I hope that makes sense).
Quoted 3 lines
- Update rustdoc-pin_init to use explicit --extern paths for proc macros as pin-init also needs alloc crate from -L$(objtree)/rust. So the proc macros needs an absolute path
As Gary mentioned, this list may be too exhaustive, i.e. one needs to see it in the diff anyway. Usually what we do is try to summarize, and most importantly, explain the "why".
Also, it doesn't seem like the list covers every change anyway if that was the intention, e.g. the removal of --out-dir.
rust/Makefile rustdoc-proc_macro2: $(src)/proc-macro2/lib.rs rustdoc-clean FORCE · line 200
Quoted 3 lines
rust/Makefile +2
-1-rustdoc-quote: private rustc_target_flags = $(quote-flags) +rustdoc-quote: private rustc_target_flags = $(quote-flags) \ + --extern proc_macro2
Hmm... why is this needed? The variable already carries the flag, no?
Quoted 1 line
- --out-dir $(objtree)/$(obj) -L$(objtree)/$(obj) \
This looks like an important removal that is not explained/mentioned elsewhere.
Also, is there a reason why we cannot keep the -L here instead of adding it in every proc macro library?
rust/Makefile rustdoc-pin_init_internal: $(src)/pin-init/internal/src/lib.rs \ · line 247
Quoted 3 lines
rust/Makefile +3
-0+ --extern pin_init_internal=$(abspath $(objtree)/$(obj)/$(libpin_init_internal_name)) \ + --extern macros=$(abspath $(objtree)/$(obj)/$(libmacros_name)) \ + $(call cfgs-to-flags,$(pin_init-cfgs)) \
Hmm... This special handling isn't great, and the fact that it means hardcoding/duplicating pin_init-flags.
Should we move the proc macros too?
rust/Makefile $(obj)/exports_kernel_generated.h: $(obj)/kernel.o FORCE · line 567
Quoted 3 lines
rust/Makefile +2
-1- --crate-type proc-macro -L$(objtree)/$(obj) \ + --crate-type proc-macro \ + -L$(objtree)/$(obj)/host \
Spurious newline added?
rust/Makefile $(obj)/exports_kernel_generated.h: $(obj)/kernel.o FORCE · line 571
Quoted 4 lines
rust/Makefile +3
-1- @$(objtree)/include/generated/rustc_cfg $< + @$(objtree)/include/generated/rustc_cfg \ + $(rustc_target_flags) \ + $<
Why is the variable moved here?
Thanks!
Cheers,
Miguel
Re: [PATCH V9 1/4] rust: Fix "multiple candidates for rmeta dependency core" error
Quoted 17 lines · Miguel Ojeda
Quoted 7 lines · Mukesh Kumar Chaurasiya (IBM)
When building Rust code with LLVM=1 with -j1, rustc was encountering an error:
"multiple candidates forrmetadependencycorefound", with two candidates:
1. The host's standard library from the rustup toolchain
2. The kernel's custom libcore.rmeta in therust/directoryPlease clarify in what conditions this happens, e.g. when building natively in an architecture like powerpc for which the target (...)
Otherwise, it sounds like this is something that would be happening to essentially everyone just by building with
-j1, which is not the case.
Quoted 6 lines
Also, since you may need to reword a bit, please take the chance to use the present tense to describe the current state, and then the imperative for what is changed. (The past is usually used for something that already changed in the past, not for something that still happens before the patch is applied -- I hope that makes sense).
Yeah this makes sense. Will reword the whole thing and send out a new revision.
Quoted 11 lines
Quoted 3 lines
- Update rustdoc-pin_init to use explicit --extern paths for proc macros as pin-init also needs alloc crate from -L$(objtree)/rust. So the proc macros needs an absolute path
As Gary mentioned, this list may be too exhaustive, i.e. one needs to see it in the diff anyway. Usually what we do is try to summarize, and most importantly, explain the "why".
Also, it doesn't seem like the list covers every change anyway if that was the intention, e.g. the removal of
--out-dir.
Ohk, will rewrite this part also.
Quoted 6 lines
rust/Makefile rustdoc-proc_macro2: $(src)/proc-macro2/lib.rs rustdoc-clean FORCE · line 200
Quoted 3 lines
rust/Makefile +2
-1-rustdoc-quote: private rustc_target_flags = $(quote-flags) +rustdoc-quote: private rustc_target_flags = $(quote-flags) \ + --extern proc_macro2Hmm... why is this needed? The variable already carries the flag, no?
Oh yeah. Will fix this.
Quoted 4 lines
Quoted 1 line
- --out-dir $(objtree)/$(obj) -L$(objtree)/$(obj) \
This looks like an important removal that is not explained/mentioned elsewhere.
Ohk, will explain this in commit message.
Quoted 3 lines
Also, is there a reason why we cannot keep the
-Lhere instead of adding it in every proc macro library?
Will move the -L here instead of each lib.
Quoted 9 lines
rust/Makefile rustdoc-pin_init_internal: $(src)/pin-init/internal/src/lib.rs \ · line 247
Quoted 3 lines
rust/Makefile +3
-0+ --extern pin_init_internal=$(abspath $(objtree)/$(obj)/$(libpin_init_internal_name)) \ + --extern macros=$(abspath $(objtree)/$(obj)/$(libmacros_name)) \ + $(call cfgs-to-flags,$(pin_init-cfgs)) \Hmm... This special handling isn't great, and the fact that it means hardcoding/duplicating
pin_init-flags.Should we move the proc macros too?
Let me find a cleaner way to do this. Will do something about this in next revision.
Quoted 6 lines
rust/Makefile $(obj)/exports_kernel_generated.h: $(obj)/kernel.o FORCE · line 567
Quoted 3 lines
rust/Makefile +2
-1- --crate-type proc-macro -L$(objtree)/$(obj) \ + --crate-type proc-macro \ + -L$(objtree)/$(obj)/host \Spurious newline added?
Will remove this.
Quoted 7 lines
rust/Makefile $(obj)/exports_kernel_generated.h: $(obj)/kernel.o FORCE · line 571
Quoted 4 lines
rust/Makefile +3
-1- @$(objtree)/include/generated/rustc_cfg $< + @$(objtree)/include/generated/rustc_cfg \ + $(rustc_target_flags) \ + $<Why is the variable moved here?
Will fix this too.
Quoted 4 lines
Thanks!
Cheers,
Miguel
Thanks for the detailed review.
Regards,
Mukesh
PATCH v9 2/4 powerpc/jump_label: adjust inline asm to be consistent
In reply to Mukesh Kumar Chaurasiya (IBM)Added support for a new macro ARCH_STATIC_BRANCH_ASM in powerpc
to avoid duplication of inline asm between C and Rust. This is
inline with 'commit aecaf181651c ("jump_label: adjust inline asm to be consistent")'
--- arch/powerpc/include/asm/jump_label.h | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-)
arch/powerpc/include/asm/jump_label.h +13 -10
@@ -15,14 +15,20 @@#define JUMP_ENTRY_TYPE stringify_in_c(FTR_ENTRY_LONG)#define JUMP_LABEL_NOP_SIZE 4 +#define JUMP_TABLE_ENTRY (key, label) \ + ".pushsection __jump_table, \"aw\" \n\t" \ + ".long 1b - ., " label " - . \n\t" \ + JUMP_ENTRY_TYPE key " - . \n\t" \ + ".popsection \n\t" + +#define ARCH_STATIC_BRANCH_ASM (key, label) \ + "1: nop \n\t" \ + JUMP_TABLE_ENTRY(key, label) + static __always_inline bool arch_static_branch(struct static_key *key, bool branch) { - asm goto("1:\n\t" -"nop # arch_static_branch\n\t" -".pushsection __jump_table, \"aw\"\n\t" -".long 1b - ., %l[l_yes] - .\n\t" -JUMP_ENTRY_TYPE "%c0 - .\n\t" -".popsection \n\t" + asm goto( + ARCH_STATIC_BRANCH_ASM("%c0", "%l[l_yes]") : : "i" (&((char *)key)[branch]) : : l_yes);return false;
@@ -34,10 +40,7 @@ static __always_inline bool arch_static_branch_jump(struct static_key *key, bool { asm goto("1:\n\t" "b %l[l_yes] # arch_static_branch_jump\n\t" -".pushsection __jump_table, \"aw\"\n\t" -".long 1b - ., %l[l_yes] - .\n\t" -JUMP_ENTRY_TYPE "%c0 - .\n\t" -".popsection \n\t" + JUMP_TABLE_ENTRY("%c0", "%l[l_yes]") : : "i" (&((char *)key)[branch]) : : l_yes);return false;
Signature · 1 line
2.53.0
PATCH v9 3/4 rust: Add PowerPC support
In reply to Mukesh Kumar Chaurasiya (IBM)From: Link Mauve <[email protected]>
For now only Big Endian 32-bit PowerPC is supported, as that is the only hardware I have. This has been tested on the Nintendo Wii so far, but I plan on also using it on the GameCube, Wii U and Apple G4.
These changes aren’t the only ones required to get the kernel to compile and link on PowerPC, libcore will also have to be changed to not use integer division to format u64, u128 and core::time::Duration, otherwise __udivdi3() and __umoddi3() will have to be added. I have tested this change by replacing the three implementations with unimplemented!() and it linked just fine.
--- arch/powerpc/Kconfig | 1 + arch/powerpc/Makefile | 2 ++ rust/Makefile | 4 +++- 3 files changed, 6 insertions(+), 1 deletion(-)
arch/powerpc/Kconfig +1 -0
@@ -284,6 +284,7 @@ config PPC select HAVE_REGS_AND_STACK_ACCESS_API select HAVE_RELIABLE_STACKTRACE select HAVE_RSEQ + select HAVE_RUST if PPC32 select HAVE_SAMPLE_FTRACE_DIRECT if HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS select HAVE_SAMPLE_FTRACE_DIRECT_MULTI if HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS select HAVE_SETUP_PER_CPU_AREA if PPC64
arch/powerpc/Makefile +2 -0
@@ -61,6 +61,8 @@ else KBUILD_LDFLAGS_MODULE += $(objtree)/arch/powerpc/lib/crtsavres.o endif +KBUILD_RUSTFLAGS += --target=powerpc-unknown-linux-gnu + ifdef CONFIG_CPU_LITTLE_ENDIAN KBUILD_CPPFLAGS += -mlittle-endian KBUILD_LDFLAGS += -EL
rust/Makefile +3 -1
@@ -410,13 +410,15 @@ bindgen_skip_c_flags := -mno-fp-ret-in-387 -mpreferred-stack-boundary=% \ -fstrict-flex-arrays=% -fmin-function-alignment=% \ -fzero-init-padding-bits=% -mno-fdpic \ -fdiagnostics-show-context -fdiagnostics-show-context=% \ - --param=% --param asan-% -fno-isolate-erroneous-paths-dereference + --param=% --param asan-% -fno-isolate-erroneous-paths-dereference \ + -ffixed-r2 -mmultiple -mno-readonly-in-sdata # Derived from `scripts/Makefile.clang`. BINDGEN_TARGET_x86 := x86_64-linux-gnu BINDGEN_TARGET_arm64 := aarch64-linux-gnu BINDGEN_TARGET_arm := arm-linux-gnueabi BINDGEN_TARGET_loongarch := loongarch64-linux-gnusf +BINDGEN_TARGET_powerpc := powerpc-linux-gnu BINDGEN_TARGET_um := $(BINDGEN_TARGET_$(SUBARCH)) BINDGEN_TARGET := $(BINDGEN_TARGET_$(SRCARCH))
Signature · 1 line
2.53.0
PATCH v9 4/4 powerpc: Enable Rust for ppc64le
In reply to Mukesh Kumar Chaurasiya (IBM)Enabling rust support for ppc64le.
Tested on pseries Power11:
╰─❯ dmesg | grep rust [ 0.225728] Initialise system trusted keyrings [ 0.270961] rust_minimal: Rust minimal sample (init) [ 0.270968] rust_minimal: Am I built-in? true [ 0.270974] rust_minimal: test_parameter: 1 [ 0.270983] rust_misc_device: Initialising Rust Misc Device Sample [ 0.271012] rust_print: Rust printing macros sample (init) [ 0.271019] rust_print: Emergency message (level 0) without args [ 0.271023] rust_print: Alert message (level 1) without args [ 0.271026] rust_print: Critical message (level 2) without args [ 0.271030] rust_print: Error message (level 3) without args [ 0.271033] rust_print: Warning message (level 4) without args [ 0.271037] rust_print: Notice message (level 5) without args [ 0.271040] rust_print: Info message (level 6) without args [ 0.271043] rust_print: A line that is continued without args [ 0.271054] rust_print: Emergency message (level 0) with args [ 0.271064] rust_print: Alert message (level 1) with args [ 0.271072] rust_print: Critical message (level 2) with args [ 0.271077] rust_print: Error message (level 3) with args [ 0.271083] rust_print: Warning message (level 4) with args [ 0.271091] rust_print: Notice message (level 5) with args [ 0.271097] rust_print: Info message (level 6) with args [ 0.271102] rust_print: A line that is continued with args [ 0.271110] rust_print: 1 [ 0.271113] rust_print: "hello, world" [ 0.271121] rust_print: [samples/rust/rust_print_main.rs:35:5] c = "hello, world" [ 0.271129] rust_print: Arc<dyn Display> says 42 [ 0.271130] rust_print: Arc<dyn Display> says hello, world [ 0.271136] rust_print: "hello, world" [ 0.271198] usbcore: registered new interface driver rust_driver_usb [ 0.271207] rust_faux_driver: Initialising Rust Faux Device Sample [ 0.271227] faux_driver rust-faux-sample-device: Hello from faux device! [ 0.271297] rust_configfs: Rust configfs sample (init)
--- arch/powerpc/Kconfig | 1 + arch/powerpc/Makefile | 7 ++++++- rust/Makefile | 6 ++++++ 3 files changed, 13 insertions(+), 1 deletion(-)
arch/powerpc/Kconfig +1 -0
@@ -285,6 +285,7 @@ config PPC select HAVE_RELIABLE_STACKTRACE select HAVE_RSEQ select HAVE_RUST if PPC32 + select HAVE_RUST if PPC64 && CPU_LITTLE_ENDIAN select HAVE_SAMPLE_FTRACE_DIRECT if HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS select HAVE_SAMPLE_FTRACE_DIRECT_MULTI if HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS select HAVE_SETUP_PER_CPU_AREA if PPC64
arch/powerpc/Makefile +6 -1
@@ -61,7 +61,12 @@ else KBUILD_LDFLAGS_MODULE += $(objtree)/arch/powerpc/lib/crtsavres.o endif -KBUILD_RUSTFLAGS += --target=powerpc-unknown-linux-gnu +ifdef CONFIG_PPC64 +KBUILD_RUSTFLAGS += --target=powerpc64le-unknown-linux-gnu +KBUILD_RUSTFLAGS += -Ctarget-feature=-mma,-vsx,-hard-float,-altivec +else +KBUILD_RUSTFLAGS += --target=powerpc-unknown-linux-gnu +endif ifdef CONFIG_CPU_LITTLE_ENDIAN KBUILD_CPPFLAGS += -mlittle-endian
rust/Makefile +6 -0
@@ -418,7 +418,13 @@ BINDGEN_TARGET_x86 := x86_64-linux-gnu BINDGEN_TARGET_arm64 := aarch64-linux-gnu BINDGEN_TARGET_arm := arm-linux-gnueabi BINDGEN_TARGET_loongarch := loongarch64-linux-gnusf + +ifdef CONFIG_PPC64 +BINDGEN_TARGET_powerpc := powerpc64le-linux-gnu +else BINDGEN_TARGET_powerpc := powerpc-linux-gnu +endif + BINDGEN_TARGET_um := $(BINDGEN_TARGET_$(SUBARCH)) BINDGEN_TARGET := $(BINDGEN_TARGET_$(SRCARCH))
Signature · 1 line
2.53.0