board/ti/tda4vm-sk : Add support for TI's tda4vm Starter-Kit board
PATCH 1/1 board/ti/tda4vm-sk : Add support for TI's tda4vm Starter-Kit board
Add support to Texas Instruments j721e starter kit, also called TDA4VM-SK.
https://www.ti.com/tool/SK-TDA4VM
--- board/ti/tda4vm-sk/extlinux.conf | 5 ++ board/ti/tda4vm-sk/genimage.cfg | 33 ++++++++++++ board/ti/tda4vm-sk/patches/linux/linux.hash | 2 + .../ti-k3-r5-loader/ti-k3-r5-loader.hash | 2 + board/ti/tda4vm-sk/patches/uboot/uboot.hash | 2 + board/ti/tda4vm-sk/post-build.sh | 5 ++ board/ti/tda4vm-sk/readme.txt | 36 +++++++++++++ configs/ti_tda4vm_sk_defconfig | 50 +++++++++++++++++++ 8 files changed, 135 insertions(+) create mode 100644 board/ti/tda4vm-sk/extlinux.conf create mode 100644 board/ti/tda4vm-sk/genimage.cfg create mode 100644 board/ti/tda4vm-sk/patches/linux/linux.hash create mode 100644 board/ti/tda4vm-sk/patches/ti-k3-r5-loader/ti-k3-r5-loader.hash create mode 100644 board/ti/tda4vm-sk/patches/uboot/uboot.hash create mode 100755 board/ti/tda4vm-sk/post-build.sh create mode 100644 board/ti/tda4vm-sk/readme.txt create mode 100644 configs/ti_tda4vm_sk_defconfig
board/ti/tda4vm-sk/extlinux.conf new file +5 -0
@@ -0,0 +1,5 @@ +default buildroot +label buildroot + kernel /Image + devicetreedir / +append root=/dev/mmcblk1p2 rootwait rw console=ttyS2,115200n8
board/ti/tda4vm-sk/genimage.cfg new file +33 -0
@@ -0,0 +1,33 @@ +image boot.vfat { + vfat { + files = { + "sysfw.itb", + "tiboot3.bin", + "tispl.bin", + "u-boot.img", + "Image", + "ti", + "extlinux", + } + + label = "boot" + } + + size = 64M +} + +image sdcard.img { + hdimage { + } + + partition u-boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +}
board/ti/tda4vm-sk/patches/linux/linux.hash new file +2 -0
@@ -0,0 +1,2 @@ +# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc +sha256 4f21c01f4d04c1d1b3ed794153f8900802c92497be620b07c4869530f2d28ee3 linux-6.18.16.tar.xz
board/ti/tda4vm-sk/patches/ti-k3-r5-loader/ti-k3-r5-loader.hash new file +2 -0
@@ -0,0 +1,2 @@ +# Locally calculated +sha256 b60d5865cefdbc75da8da4156c56c458e00de75a49b80c1a2e58a96e30ad0d54 u-boot-2026.01.tar.bz2
board/ti/tda4vm-sk/patches/uboot/uboot.hash new file +2 -0
@@ -0,0 +1,2 @@ +# Locally calculated +sha256 b60d5865cefdbc75da8da4156c56c458e00de75a49b80c1a2e58a96e30ad0d54 u-boot-2026.01.tar.bz2
board/ti/tda4vm-sk/post-build.sh new file +5 -0
@@ -0,0 +1,5 @@ +#!/bin/sh + +BOARD_DIR="$(dirname "$0")" + +install -m 0644 -D "$BOARD_DIR"/extlinux.conf "$BINARIES_DIR"/extlinux/extlinux.conf
board/ti/tda4vm-sk/readme.txt new file +36 -0
@@ -0,0 +1,36 @@ +Texas Instuments SK-TDA4VM Test and Development Board + +Description +=========== + +This configuration will build a complete image for the TI SK-TDA4VM +board: https://www.ti.com/tool/SK-TDA4VM + +How to Build +============ + +Select the default configuration for the target: + +$ make ti_tda4vm_sk_defconfig + +Optional: modify the configuration: + +$ make menuconfig + +Build: + +$ make + +To copy the resultimg output image file to an SD card use dd: + +$ dd if=output/images/sdcard.img of=/dev/sdX bs=1M + +How to Run +========== + +Insert the SD card into the SK-TDA4VM board, and power it up through the +USB Type-C connector. The system should come up. You can use a +micro-USB cable to connect to the connector labeled UART to +communicate with the board. + +User's guide : https://www.ti.com/lit/ug/spruj21e/spruj21e.pdf
configs/ti_tda4vm_sk_defconfig new file +50 -0
50 lines not on this page · raw message
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
Hello Sofiane,
Le 04/04/2026 à 19:46, Sofiane HAMAM a écrit :
Quoted 7 lines
Add support to Texas Instruments j721e starter kit, also called TDA4VM-SK.
https://www.ti.com/tool/SK-TDA4VM
Signed-off-by Sofiane HAMAM <[email protected]>Tested-by Sofiane HAMAM <[email protected]>Reviewed-by Romain NAOUR <[email protected]>
I have the board, it's almost the same as the BeagleboneAI64 but without an eMMC. But the PCIe interface is working out of the box since there is a PCIe ref clock generator on the board. Also, if you want to boot using the USB DFI (using Snagboot of course) the SW1 Switch help to configure the SoC bootmode.
Best regards,
Romain
Quoted 192 lines
--- board/ti/tda4vm-sk/extlinux.conf | 5 ++ board/ti/tda4vm-sk/genimage.cfg | 33 ++++++++++++ board/ti/tda4vm-sk/patches/linux/linux.hash | 2 + .../ti-k3-r5-loader/ti-k3-r5-loader.hash | 2 + board/ti/tda4vm-sk/patches/uboot/uboot.hash | 2 + board/ti/tda4vm-sk/post-build.sh | 5 ++ board/ti/tda4vm-sk/readme.txt | 36 +++++++++++++ configs/ti_tda4vm_sk_defconfig | 50 +++++++++++++++++++ 8 files changed, 135 insertions(+) create mode 100644 board/ti/tda4vm-sk/extlinux.conf create mode 100644 board/ti/tda4vm-sk/genimage.cfg create mode 100644 board/ti/tda4vm-sk/patches/linux/linux.hash create mode 100644 board/ti/tda4vm-sk/patches/ti-k3-r5-loader/ti-k3-r5-loader.hash create mode 100644 board/ti/tda4vm-sk/patches/uboot/uboot.hash create mode 100755 board/ti/tda4vm-sk/post-build.sh create mode 100644 board/ti/tda4vm-sk/readme.txt create mode 100644 configs/ti_tda4vm_sk_defconfigboard/ti/tda4vm-sk/extlinux.conf new file +5
-0@@ -0,0 +1,5 @@ +default buildroot +label buildroot + kernel /Image + devicetreedir / +append root=/dev/mmcblk1p2 rootwait rw console=ttyS2,115200n8board/ti/tda4vm-sk/genimage.cfg new file +33
-0@@ -0,0 +1,33 @@ +image boot.vfat { + vfat { + files = { + "sysfw.itb", + "tiboot3.bin", + "tispl.bin", + "u-boot.img", + "Image", + "ti", + "extlinux", + } + + label = "boot" + } + + size = 64M +} + +image sdcard.img { + hdimage { + } + + partition u-boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +}board/ti/tda4vm-sk/patches/linux/linux.hash new file +2
-0@@ -0,0 +1,2 @@ +# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc +sha256 4f21c01f4d04c1d1b3ed794153f8900802c92497be620b07c4869530f2d28ee3 linux-6.18.16.tar.xzboard/ti/tda4vm-sk/patches/ti-k3-r5-loader/ti-k3-r5-loader.hash new file +2
-0@@ -0,0 +1,2 @@ +# Locally calculated +sha256 b60d5865cefdbc75da8da4156c56c458e00de75a49b80c1a2e58a96e30ad0d54 u-boot-2026.01.tar.bz2board/ti/tda4vm-sk/patches/uboot/uboot.hash new file +2
-0@@ -0,0 +1,2 @@ +# Locally calculated +sha256 b60d5865cefdbc75da8da4156c56c458e00de75a49b80c1a2e58a96e30ad0d54 u-boot-2026.01.tar.bz2board/ti/tda4vm-sk/post-build.sh new file +5
-0@@ -0,0 +1,5 @@ +#!/bin/sh + +BOARD_DIR="$(dirname "$0")" + +install -m 0644 -D "$BOARD_DIR"/extlinux.conf "$BINARIES_DIR"/extlinux/extlinux.confboard/ti/tda4vm-sk/readme.txt new file +36
-0@@ -0,0 +1,36 @@ +Texas Instuments SK-TDA4VM Test and Development Board + +Description +=========== + +This configuration will build a complete image for the TI SK-TDA4VM +board: https://www.ti.com/tool/SK-TDA4VM + +How to Build +============ + +Select the default configuration for the target: + +$ make ti_tda4vm_sk_defconfig + +Optional: modify the configuration: + +$ make menuconfig + +Build: + +$ make + +To copy the resultimg output image file to an SD card use dd: + +$ dd if=output/images/sdcard.img of=/dev/sdX bs=1M + +How to Run +========== + +Insert the SD card into the SK-TDA4VM board, and power it up through the +USB Type-C connector. The system should come up. You can use a +micro-USB cable to connect to the connector labeled UART to +communicate with the board. + +User's guide : https://www.ti.com/lit/ug/spruj21e/spruj21e.pdfconfigs/ti_tda4vm_sk_defconfig new file +40
-0@@ -0,0 +1,50 @@ +BR2_aarch64=y +BR2_cortex_a72=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_GLIBC_STABLE=y +BR2_GLOBAL_PATCH_DIR="board/ti/tda4vm-sk/patches" +BR2_DOWNLOAD_FORCE_CHECK_HASHES=y +BR2_SYSTEM_DHCP="eth0" +BR2_ROOTFS_POST_BUILD_SCRIPT="board/ti/tda4vm-sk/post-build.sh" +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/ti/tda4vm-sk/genimage.cfg" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.16" +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="ti/k3-j721e-sk" +BR2_LINUX_KERNEL_DTB_KEEP_DIRNAME=y +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="256M" +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_LATEST_LTS_2_12_VERSION=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="k3" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_TARGET_BOARD="generic" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL32_OPTEE=y +BR2_TARGET_OPTEE_OS=y +BR2_TARGET_OPTEE_OS_PLATFORM="k3-j721e" +BR2_TARGET_TI_K3_R5_LOADER=y +BR2_TARGET_TI_K3_R5_LOADER_CUSTOM_VERSION=y +BR2_TARGET_TI_K3_R5_LOADER_CUSTOM_VERSION_VALUE="2026.01" +BR2_TARGET_TI_K3_R5_LOADER_BOARD_DEFCONFIG="j721e_evm_r5" +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.01" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="j721e_evm_a72" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
configs/ti_tda4vm_sk_defconfig line 50
Quoted 10 lines
configs/ti_tda4vm_sk_defconfig new file +10
-0+BR2_TARGET_UBOOT_USE_BINMAN=y +# BR2_TARGET_UBOOT_FORMAT_BIN is not set +BR2_TARGET_UBOOT_NEEDS_OPTEE_TEE=y +BR2_TARGET_UBOOT_NEEDS_OPTEE_TEE_RAW_BIN=y +BR2_TARGET_UBOOT_FORMAT_IMG=y +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="tispl.bin" +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
Quoted 7 lines · Sofiane HAMAM via buildroot
Add support to Texas Instruments j721e starter kit, also called TDA4VM-SK.
https://www.ti.com/tool/SK-TDA4VM
Signed-off-by Sofiane HAMAM <[email protected]>Tested-by Sofiane HAMAM <[email protected]>Reviewed-by Romain NAOUR <[email protected]>
Applied to master, thanks. For info, I made few minor changes:
- reword commit log title
- regenerate defconfig with "make savedefconfig"
- fix typo in readme.txt
See:
https://gitlab.com/buildroot.org/buildroot/-/commit/bfc1cde65b6574ffb6ed343ec525775bc577c354
Best regards,
Julien.
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot