Skip to contentSkip to conversation

ata: ahci: force 32-bit DMA for JMicron JMB582/JMB585

PATCH Superseded Arthur Husband 1 participant 1 message Apr 6 libata

lore
Share & tools
lore
#0 lore raw

PATCH v4 1/1 ata: ahci: force 32-bit DMA for JMicron JMB582/JMB585

The JMicron JMB585 (and JMB582) SATA controllers advertise 64-bit DMA support via the S64A bit in the AHCI CAP register, but their 64-bit DMA implementation is defective. Under sustained I/O, DMA transfers targeting addresses above 4GB silently corrupt data -- writes land at incorrect memory addresses with no errors logged.

The failure pattern is similar to the ASMedia ASM1061 (commit 20730e9b2778 ("ahci: add 43-bit DMA address quirk for ASMedia ASM1061 controllers")), which also falsely advertised full 64-bit DMA support. However, the JMB585 requires a stricter 32-bit DMA mask rather than 43-bit, as corruption occurs with any address above 4GB.

On the Minisforum N5 Pro specifically, the combination of the JMB585's broken 64-bit DMA with the AMD Family 1Ah (Strix Point) IOMMU causes silent data corruption that is only detectable via checksumming filesystems (BTRFS/ZFS scrub). The corruption occurs when 32-bit IOVA space is exhausted and the kernel transparently switches to 64-bit DMA addresses.

Add device-specific PCI ID entries for the JMB582 (0x0582) and JMB585 (0x0585) before the generic JMicron class match, using a new board type that combines AHCI_HFLAG_IGN_IRQ_IF_ERR (preserving existing behavior) with AHCI_HFLAG_32BIT_ONLY to force 32-bit DMA masks.

---
 drivers/ata/ahci.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)
drivers/ata/ahci.c +14 -0
index 931d008..1d73a53 100644
@@ -68,6 +68,7 @@ enum board_ids {
 	/* board IDs for specific chipsets in alphabetical order */
 	board_ahci_al,
 	board_ahci_avn,
+	board_ahci_jmb585,
 	board_ahci_mcp65,
 	board_ahci_mcp77,
 	board_ahci_mcp89,
@@ -212,6 +213,15 @@ static const struct ata_port_info ahci_port_info[] = {
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_avn_ops,
 	},
+	/* JMicron JMB582/585: 64-bit DMA is broken, force 32-bit */
+	[board_ahci_jmb585] = {
+		AHCI_HFLAGS	(AHCI_HFLAG_IGN_IRQ_IF_ERR |
+				 AHCI_HFLAG_32BIT_ONLY),
+		.flags		= AHCI_FLAG_COMMON,
+		.pio_mask	= ATA_PIO4,
+		.udma_mask	= ATA_UDMA6,
+		.port_ops	= &ahci_ops,
+	},
 	[board_ahci_mcp65] = {
 		AHCI_HFLAGS	(AHCI_HFLAG_NO_FPDMA_AA | AHCI_HFLAG_NO_PMP |
 				 AHCI_HFLAG_YES_NCQ),
@@ -439,6 +449,10 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	/* Elkhart Lake IDs 0x4b60 & 0x4b62 https://sata-io.org/product/8803 not tested yet */
 	{ PCI_VDEVICE(INTEL, 0x4b63), board_ahci_pcs_quirk }, /* Elkhart Lake AHCI */
 
+	/* JMicron JMB582/585: force 32-bit DMA (broken 64-bit implementation) */
+	{ PCI_VDEVICE(JMICRON, 0x0582), board_ahci_jmb585 },
+	{ PCI_VDEVICE(JMICRON, 0x0585), board_ahci_jmb585 },
+
 	/* JMicron 360/1/3/5/6, match class to avoid IDE function */
 	{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
 	  PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci_ign_iferr },
Signature · 1 line
2.53.0