arm64: dts: imx952: Describe Mali G310 GPU
Subsystems (2)
PATCH v3 1/1 arm64: dts: imx952: Describe Mali G310 GPU
Support Mali G310 GPU on i.MX952 board. Describe this GPU in the DT. Include dummy GPU voltage regulator and OPP tables.
A hardware GPU auto clock‑gating mechanism has been introduced, enabling GPUMIX to automatically manage the GPU clock. This improves overall response time.
---
This series enable Mali G310 GPU support on i.MX952 boards, the same GPU IP as the instance on i.MX95 boards.
---
Changes in v3:
- Follow the order of interrupts/interrupt-names in arm,mali-valhall-csf.yaml.
- Drop dt-bindings change in arm,mali-valhall-csf.yaml.
- Replace "nxp,imx952-mali" with "nxp,imx95-mali" in compatible.
- Link to v2: https://patch.msgid.link/[email protected]
Changes in v2:
- Improve patch description, adding more GPU information.
- Remove Reviewed-by tag.
- Link to v1: https://patch.msgid.link/[email protected]
--- arch/arm64/boot/dts/freescale/imx952.dtsi | 36 +++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+)
arch/arm64/boot/dts/freescale/imx952.dtsi +36 -0
@@ -318,6 +318,28 @@ usbphynop2: usbphynop2 { clock-names = "main_clk"; }; + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-hz-real = /bits/ 64 <500000000>; + opp-microvolt = <920000>; + }; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-hz-real = /bits/ 64 <800000000>; + opp-microvolt = <920000>; + }; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-hz-real = /bits/ 64 <1000000000>; + opp-microvolt = <920000>; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <2>;
@@ -1262,5 +1284,19 @@ usbmisc2: usbmisc@4c200200 { reg = <0x0 0x4c200200 0x0 0x200>, <0x0 0x4c010014 0x0 0x4>; }; + + gpu: gpu@4d900000 { + compatible = "nxp,imx95-mali", "arm,mali-valhall-csf"; + reg = <0 0x4d900000 0 0x480000>; + interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "job", "mmu", "gpu"; + clocks = <&scmi_clk IMX952_CLK_GPU>; + clock-names = "core"; + power-domains = <&scmi_devpd IMX952_PD_GPU>; + operating-points-v2 = <&gpu_opp_table>; + dynamic-power-coefficient = <1013>; + }; }; };
---
base-commit: 0138af2472dfdef0d56fc4697416eaa0ff2589bd
change-id: 20260331-master-7ec7ff0fe1b2
Best regards,
Signature · 1 line
Guangliu Ding <[email protected]>
Quoted 8 lines · Guangliu Ding
Support Mali G310 GPU on i.MX952 board. Describe this GPU in the DT. Include dummy GPU voltage regulator and OPP tables.
A hardware GPU auto clock‑gating mechanism has been introduced, enabling GPUMIX to automatically manage the GPU clock. This improves overall response time.
Signed-off-by Guangliu Ding <[email protected]>
Best regards,
Liviu
Quoted 80 lines
---
This series enable Mali G310 GPU support on i.MX952 boards, the same GPU IP as the instance on i.MX95 boards.
---
Changes in v3:
- Follow the order of interrupts/interrupt-names in arm,mali-valhall-csf.yaml.
- Drop dt-bindings change in arm,mali-valhall-csf.yaml.
- Replace "nxp,imx952-mali" with "nxp,imx95-mali" in compatible.
- Link to v2: https://patch.msgid.link/[email protected]Changes in v2:
- Improve patch description, adding more GPU information.
- Remove Reviewed-by tag.
- Link to v1: https://patch.msgid.link/[email protected]--- arch/arm64/boot/dts/freescale/imx952.dtsi | 36 +++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+)arch/arm64/boot/dts/freescale/imx952.dtsi +36
-1@@ -318,6 +318,28 @@ usbphynop2: usbphynop2 { clock-names = "main_clk"; }; + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-hz-real = /bits/ 64 <500000000>; + opp-microvolt = <920000>; + }; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-hz-real = /bits/ 64 <800000000>; + opp-microvolt = <920000>; + }; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-hz-real = /bits/ 64 <1000000000>; + opp-microvolt = <920000>; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <2>;@@ -1262,5 +1284,19 @@ usbmisc2: usbmisc@4c200200 { reg = <0x0 0x4c200200 0x0 0x200>, <0x0 0x4c010014 0x0 0x4>; }; + + gpu: gpu@4d900000 { + compatible = "nxp,imx95-mali", "arm,mali-valhall-csf"; + reg = <0 0x4d900000 0 0x480000>; + interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "job", "mmu", "gpu"; + clocks = <&scmi_clk IMX952_CLK_GPU>; + clock-names = "core"; + power-domains = <&scmi_devpd IMX952_PD_GPU>; + operating-points-v2 = <&gpu_opp_table>; + dynamic-power-coefficient = <1013>; + }; }; }; ---base-commit:
0138af2472dfdef0d56fc4697416eaa0ff2589bd
change-id: 20260331-master-7ec7ff0fe1b2Best regards,
Signature · 1 line
Guangliu Ding <[email protected]>
Signature · 8 lines
====================
| I would like to |
| fix the world, |
| but they're not |
| giving me the |
\ source code! /
---------------
¯\_(ツ)_/¯Quoted 8 lines · Guangliu Ding
Support Mali G310 GPU on i.MX952 board. Describe this GPU in the DT. Include dummy GPU voltage regulator and OPP tables.
A hardware GPU auto clock‑gating mechanism has been introduced, enabling GPUMIX to automatically manage the GPU clock. This improves overall response time.
[...]
Applied, thanks!
[1/1] arm64: dts: imx952: Describe Mali G310 GPU
commit: 3ae6b04598bb3ea5ef859d96b37bb47ca395d3c3
Best regards,
Signature · 1 line
Frank Li <[email protected]>