qemu-nbd: Support -s and -l at the same time
PATCH 1/1 qemu-nbd: Support -s and -l at the same time
qemu-nbd already has the ability to wrap a read-write layer on top of the export of a read-only image (-s) and the ability to export an internal snapshot rather than the main image in a qcow2 file (-l SNAPID). But it gave a confusing error message when trying to mix the two, because the snapshot overlay created first no longer has access to the internal snapshots of the image being wrapped.
WIth a bit of finesse, this useful scenario is now supported.
https://gitlab.com/qemu-project/qemu/-/work_items/159
Signed-off-by Eric Blake <[email protected]>
--- docs/tools/qemu-nbd.rst | 7 +- qemu-nbd.c | 20 ++++- tests/qemu-iotests/tests/qemu-nbd-snapshots | 79 +++++++++++++++++++ .../qemu-iotests/tests/qemu-nbd-snapshots.out | 34 ++++++++ 4 files changed, 134 insertions(+), 6 deletions(-) create mode 100755 tests/qemu-iotests/tests/qemu-nbd-snapshots create mode 100644 tests/qemu-iotests/tests/qemu-nbd-snapshots.out
docs/tools/qemu-nbd.rst +4 -3
@@ -95,9 +95,10 @@ driver options if :option:`--image-opts` is specified. .. option:: -l, --load-snapshot=SNAPSHOT_PARAM - Load an internal snapshot inside *filename* and export it - as an read-only device, SNAPSHOT_PARAM format is - ``snapshot.id=[ID],snapshot.name=[NAME]`` or ``[ID_OR_NAME]`` + Load an internal snapshot inside *filename* and export it. + SNAPSHOT_PARAM format is ``snapshot.id=[ID],snapshot.name=[NAME]`` + or ``[ID_OR_NAME]``. The export is read-only unless ``-s`` is also + in use. .. option:: --cache=CACHE
qemu-nbd.c +17 -3
@@ -534,6 +534,7 @@ int main(int argc, char **argv) {BlockBackend *blk;BlockDriverState *bs; +BlockDriverState *orig_bs;uint64_t dev_offset =0 ;bool readonly = false;bool disconnect = false;
@@ -716,7 +717,7 @@ int main(int argc, char **argv) }else { sn_id_or_name = optarg; } -/* fall through */ +break ;case 'r' : readonly = true; flags &= ~BDRV_O_RDWR ;
@@ -1110,6 +1111,15 @@ int main(int argc, char **argv)bdrv_init ();atexit (qemu_nbd_shutdown); +/* +* -s and -l can be used together to create read-write wrapper +* around an internal snapshot. Otherwise, -l in isolation implies +* read-only. +*/ +if ((sn_opts || sn_id_or_name) && (flags &BDRV_O_SNAPSHOT ) ==0 ) { + readonly = true; + flags &= ~BDRV_O_RDWR ; + } opts.srcpath = argv[optind];if (imageOpts) {QemuOpts *o;
@@ -1155,13 +1165,17 @@ int main(int argc, char **argv)blk_set_enable_write_cache (blk, !writethrough); + orig_bs = bs; +if (flags &BDRV_O_SNAPSHOT ) { + orig_bs = bs->backing->bs; + }if (sn_opts) { - ret =bdrv_snapshot_load_tmp (bs, + ret =bdrv_snapshot_load_tmp (orig_bs,qemu_opt_get (sn_opts,SNAPSHOT_OPT_ID ),qemu_opt_get (sn_opts,SNAPSHOT_OPT_NAME ), &local_err); }else if (sn_id_or_name) { - ret =bdrv_snapshot_load_tmp_by_id_or_name (bs, sn_id_or_name, + ret =bdrv_snapshot_load_tmp_by_id_or_name (orig_bs, sn_id_or_name, &local_err); }if (ret <0 ) {
tests/qemu-iotests/tests/qemu-nbd-snapshots new file +79 -0
79 lines not on this page · raw message
tests/qemu-iotests/tests/qemu-nbd-snapshots.out new file +34 -0
@@ -0,0 +1,34 @@ +QA output created by qemu-nbd-snapshots + +=== Initial image setup === + +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=10485760 +wrote 1048576/1048576 bytes at offset 3145728 +1 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +wrote 1048576/1048576 bytes at offset 3145728 +1 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) + +=== Main image in snapshot mode === + +read 1048576/1048576 bytes at offset 3145728 +1 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +wrote 1048576/1048576 bytes at offset 3145728 +1 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) + +=== Read-only snapshot access === + +read 1048576/1048576 bytes at offset 3145728 +1 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) + +=== Combine -s and -l for read-write internal snapshot access === + +read 1048576/1048576 bytes at offset 3145728 +1 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +wrote 1048576/1048576 bytes at offset 3145728 +1 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) + +=== Check that original image is unchanged === + +read 1048576/1048576 bytes at offset 3145728 +1 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +*** done
Signature · 1 line
2.53.0