net: fix GTP Tunnel parse out-of-bounds read
PATCH 1/1 net: fix GTP Tunnel parse out-of-bounds read
If packet is fragmented across multiple mbufs or the packet has only GTP header the code would reference outside the incoming mbuf.
Send GTP packet:
- Valid GTP header (8 bytes)
- msg_type = 0xff
- e=1, s=1, pn=1 (sets gtp_len = 12)
- Total packet size = 10 bytes
Read at gh + 12 accesses 2 bytes beyond packet end.
The fix is to use rte_pktmbuf_read in a manner similar to the read of the GTP header.
--- lib/net/rte_net.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-)
lib/net/rte_net.c +10 -5
@@ -219,8 +219,7 @@ ptype_tunnel_with_udp(uint16_t *proto, const struct rte_mbuf *m,case RTE_GTPU_UDP_PORT : {const struct rte_gtp_hdr *gh;struct rte_gtp_hdr gh_copy; -uint8_t gtp_len; -uint8_t ip_ver; +uint32_t gtp_len; gh =rte_pktmbuf_read (m, *off,sizeof (*gh), &gh_copy);if (unlikely (gh ==NULL ))return 0 ;
@@ -231,9 +230,16 @@ ptype_tunnel_with_udp(uint16_t *proto, const struct rte_mbuf *m,* Check message type. If message type is 0xff, it is * a GTP data packet. If not, it is a GTP control packet */ + *off += gtp_len;if (gh->msg_type ==0xff ) { - ip_ver = *(const uint8_t *)((const char *)gh + gtp_len); - ip_ver = (ip_ver) &0xf0 ; +const uint8_t *l3_hdr; +uint8_t l3_copy, ip_ver; + + l3_hdr =rte_pktmbuf_read (m, *off,sizeof (*l3_hdr), &l3_copy); +if (unlikely (l3_hdr ==NULL )) +return 0 ; + + ip_ver = *l3_hdr &0xf0 ;if (ip_ver ==RTE_GTP_TYPE_IPV4 ) *proto =rte_cpu_to_be_16 (RTE_ETHER_TYPE_IPV4 );else if (ip_ver ==RTE_GTP_TYPE_IPV6 )
@@ -243,7 +249,6 @@ ptype_tunnel_with_udp(uint16_t *proto, const struct rte_mbuf *m, }else { *proto =0 ; } - *off += gtp_len; hdr_lens->inner_l2_len = gtp_len +sizeof (struct rte_udp_hdr ); hdr_lens->tunnel_len = gtp_len;if (port_no ==RTE_GTPC_UDP_PORT )
Signature · 1 line
2.53.0
Any comment about this fix?
09/04/2026 18:15, Stephen Hemminger:
Quoted 65 lines
If packet is fragmented across multiple mbufs or the packet has only GTP header the code would reference outside the incoming mbuf.
Send GTP packet:
- Valid GTP header (8 bytes)
-msg_type=0xff
- e=1, s=1, pn=1 (setsgtp_len= 12)
- Total packet size = 10 bytesRead at gh + 12 accesses 2 bytes beyond packet end.
The fix is to use
rte_pktmbuf_readin a manner similar to the read of the GTP header.Fixes 64ed7f854cf4 ("net: add tunnel packet type parsing")Signed-off-by Stephen Hemminger <[email protected]>--- lib/net/rte_net.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-)lib/net/rte_net.c +10
-5@@ -219,8 +219,7 @@ ptype_tunnel_with_udp(uint16_t *proto, const struct rte_mbuf *m,case RTE_GTPU_UDP_PORT : {const struct rte_gtp_hdr *gh;struct rte_gtp_hdr gh_copy; -uint8_t gtp_len; -uint8_t ip_ver; +uint32_t gtp_len; gh =rte_pktmbuf_read (m, *off,sizeof (*gh), &gh_copy);if (unlikely (gh ==NULL ))return 0 ;@@ -231,9 +230,16 @@ ptype_tunnel_with_udp(uint16_t *proto, const struct rte_mbuf *m,* Check message type. If message type is 0xff, it is * a GTP data packet. If not, it is a GTP control packet */ + *off += gtp_len;if (gh->msg_type ==0xff ) { - ip_ver = *(const uint8_t *)((const char *)gh + gtp_len); - ip_ver = (ip_ver) &0xf0 ; +const uint8_t *l3_hdr; +uint8_t l3_copy, ip_ver; + + l3_hdr =rte_pktmbuf_read (m, *off,sizeof (*l3_hdr), &l3_copy); +if (unlikely (l3_hdr ==NULL )) +return 0 ; + + ip_ver = *l3_hdr &0xf0 ;if (ip_ver ==RTE_GTP_TYPE_IPV4 ) *proto =rte_cpu_to_be_16 (RTE_ETHER_TYPE_IPV4 );else if (ip_ver ==RTE_GTP_TYPE_IPV6 )@@ -243,7 +249,6 @@ ptype_tunnel_with_udp(uint16_t *proto, const struct rte_mbuf *m, }else { *proto =0 ; } - *off += gtp_len; hdr_lens->inner_l2_len = gtp_len +sizeof (struct rte_udp_hdr ); hdr_lens->tunnel_len = gtp_len;if (port_no ==RTE_GTPC_UDP_PORT )
Andrew Rybchenko
Reviewed-byQuoted 23 lines · Thomas Monjalon
Any comment about this fix?
09/04/2026 18:15, Stephen Hemminger:
Quoted 19 lines
If packet is fragmented across multiple mbufs or the packet has only GTP header the code would reference outside the incoming mbuf.
Send GTP packet:
- Valid GTP header (8 bytes)
-msg_type=0xff
- e=1, s=1, pn=1 (setsgtp_len= 12)
- Total packet size = 10 bytesRead at gh + 12 accesses 2 bytes beyond packet end.
The fix is to use
rte_pktmbuf_readin a manner similar to the read of the GTP header.Fixes 64ed7f854cf4 ("net: add tunnel packet type parsing")Signed-off-by Stephen Hemminger <[email protected]>
The overall idea LGTM. However one nit in the code.
Quoted 19 lines
Quoted 19 lines
--- lib/net/rte_net.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-)lib/net/rte_net.c +1
-2@@ -219,8 +219,7 @@ ptype_tunnel_with_udp(uint16_t *proto, const struct rte_mbuf *m,case RTE_GTPU_UDP_PORT : {const struct rte_gtp_hdr *gh;struct rte_gtp_hdr gh_copy; -uint8_t gtp_len; -uint8_t ip_ver; +uint32_t gtp_len; gh =rte_pktmbuf_read (m, *off,sizeof (*gh), &gh_copy);if (unlikely (gh ==NULL ))return 0 ;@@ -231,9 +230,16 @@ ptype_tunnel_with_udp(uint16_t *proto, const struct rte_mbuf *m,
Quoted 8 lines
lib/net/rte_net.c ptype_tunnel_with_udp(uint16_t *proto, const struct rte_mbuf *m, · line 235
Quoted 8 lines
lib/net/rte_net.c +2
-2* Check message type. If message type is 0xff, it is * a GTP data packet. If not, it is a GTP control packet */ + *off += gtp_len;if (gh->msg_type ==0xff ) { - ip_ver = *(const uint8_t *)((const char *)gh + gtp_len); - ip_ver = (ip_ver) &0xf0 ; +const uint8_t *l3_hdr;
l3_hdr is confusing here. It sounds like a complete layer 3 header, but it is just one first byte. May be it would be useful to highlight that it is an inner Layer 3 header.
E.g. inner_l3_hdr_byte (I'm not fully happy with the name too, but I hope idea is clear)
Quoted 3 lines
lib/net/rte_net.c ptype_tunnel_with_udp(uint16_t *proto, const struct rte_mbuf *m, · line 238
Quoted 3 lines
lib/net/rte_net.c +3
-0+uint8_t l3_copy, ip_ver; + + l3_hdr =rte_pktmbuf_read (m, *off,sizeof (*l3_hdr), &l3_copy);
sizeof(l3_copy) would be safer here.
Quoted 21 lines
Quoted 16 lines
lib/net/rte_net.c +4
-1+if (unlikely (l3_hdr ==NULL )) +return 0 ; + + ip_ver = *l3_hdr &0xf0 ;if (ip_ver ==RTE_GTP_TYPE_IPV4 ) *proto =rte_cpu_to_be_16 (RTE_ETHER_TYPE_IPV4 );else if (ip_ver ==RTE_GTP_TYPE_IPV6 )@@ -243,7 +249,6 @@ ptype_tunnel_with_udp(uint16_t *proto, const struct rte_mbuf *m, }else { *proto =0 ; } - *off += gtp_len; hdr_lens->inner_l2_len = gtp_len +sizeof (struct rte_udp_hdr ); hdr_lens->tunnel_len = gtp_len;if (port_no ==RTE_GTPC_UDP_PORT )
PATCH v2 1/1 net: fix GTP Tunnel parse out-of-bounds read
In reply to Stephen HemmingerIf packet is fragmented across multiple mbufs or the packet has only GTP header the code would reference outside the incoming mbuf.
Send GTP packet:
- Valid GTP header (8 bytes)
- msg_type = 0xff
- e=1, s=1, pn=1 (sets gtp_len = 12)
- Total packet size = 10 bytes
Read at gh + 12 accesses 2 bytes beyond packet end.
The fix is to use rte_pktmbuf_read in a manner similar to the read of the GTP header.
---
v2 - change variable name of l3 header byte
lib/net/rte_net.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-)
lib/net/rte_net.c +11 -5
@@ -219,8 +219,7 @@ ptype_tunnel_with_udp(uint16_t *proto, const struct rte_mbuf *m,case RTE_GTPU_UDP_PORT : {const struct rte_gtp_hdr *gh;struct rte_gtp_hdr gh_copy; -uint8_t gtp_len; -uint8_t ip_ver; +uint32_t gtp_len; gh =rte_pktmbuf_read (m, *off,sizeof (*gh), &gh_copy);if (unlikely (gh ==NULL ))return 0 ;
@@ -231,9 +230,17 @@ ptype_tunnel_with_udp(uint16_t *proto, const struct rte_mbuf *m,* Check message type. If message type is 0xff, it is * a GTP data packet. If not, it is a GTP control packet */ + *off += gtp_len;if (gh->msg_type ==0xff ) { - ip_ver = *(const uint8_t *)((const char *)gh + gtp_len); - ip_ver = (ip_ver) &0xf0 ; +const uint8_t *l3_byte; +uint8_t l3_copy, ip_ver; + +/* read first byte of l3 header */ + l3_byte =rte_pktmbuf_read (m, *off,sizeof (uint8_t ), &l3_copy); +if (unlikely (l3_byte ==NULL )) +return 0 ; + + ip_ver = *l3_byte &0xf0 ;if (ip_ver ==RTE_GTP_TYPE_IPV4 ) *proto =rte_cpu_to_be_16 (RTE_ETHER_TYPE_IPV4 );else if (ip_ver ==RTE_GTP_TYPE_IPV6 )
@@ -243,7 +250,6 @@ ptype_tunnel_with_udp(uint16_t *proto, const struct rte_mbuf *m, }else { *proto =0 ; } - *off += gtp_len; hdr_lens->inner_l2_len = gtp_len +sizeof (struct rte_udp_hdr ); hdr_lens->tunnel_len = gtp_len;if (port_no ==RTE_GTPC_UDP_PORT )
Signature · 1 line
2.53.0