iio: light: vcnl4000: drop enum ID table and use device-managed register
v3 cover iio: light: vcnl4000: drop enum ID table and use device-managed register
This patch series drops the enum ID table for device enumeration and instead adds pointers to chip ID structs directly. Necessary information about the device is then taken from i2c_get_match_data() call. This removes the association between enum ID table and struct table and allows for easier addition and removal of new devices.
Along with that, an iio_device_register() call is replaced with its device-managed counterpart, to ensure that device is unregistered automatically.
No functional changes are intended.
---
Changes in v3:
- Reordered the commit for moving device tree entries into one line
after the commit dropping enum table.
- After a failed iio_device_register(), added
pm_runtime_set_suspended().
- Reordered device-managed IIO device register to come before setting autosuspend, as it was before this patch series.
- Link to v2: https://patch.msgid.link/[email protected]
Changes in v2:
- Moved device tree table entries into one line.
- Moved power state function in probe into a device-managed action.
- Replaced call to pm_runtime_set_active() and pm_runtime_enable() with
its device-managed counterpart.
- Removed vcnl4000_remove function(), as all the clean up is done by device-managed functions.
- Link to v1: https://lore.kernel.org/r/[email protected]
---
Erikas Bitovtas (6):
iio: light: vcnl4000: validate device by prod ID instead of table ID
iio: light: vcnl4000: drop enum id table in favor of chip structs
iio: light: vcnl4000: move device tree entries into one line
iio: light: vcnl4000: move power state function into device-managed action
iio: light: vcnl4000: make pm_runtime_enable() device-managed
iio: light: vcnl4000: register an IIO device with a device-managed function
drivers/iio/light/vcnl4000.c | 276 +++++++++++++++++++------------------------ 1 file changed, 123 insertions(+), 153 deletions(-)
---
base-commit: 64450c940b89dd8fdc74178fba2f31718afd8c71
change-id: 20260401-vcnl4000-drop-enum-0238061fcff8
Best regards,
Signature · 1 line
Erikas Bitovtas <[email protected]>
PATCH v3 1/6 iio: light: vcnl4000: validate device by prod ID instead of table ID
Add a new field for vcnl4000_chip_spec and check if we have the right device by that instead of the index from enum table. This leaves the enum table being used only for picking the right vcnl4000_chip_spec, allowing us to drop it later on.
--- drivers/iio/light/vcnl4000.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
drivers/iio/light/vcnl4000.c +8 -2
@@ -234,6 +234,7 @@ struct vcnl4000_chip_spec {const int (*als_it_times)[][2 ];const int num_als_it_times;const unsigned int ulux_step; +const int prod_id; };static const struct i2c_device_id vcnl4000_id[] = {
@@ -265,12 +266,12 @@ static int vcnl4000_init(struct vcnl4000_data *data) prod_id = ret >>4 ;switch (prod_id) {case VCNL4000_PROD_ID : -if (data->id !=VCNL4000 ) +if (data->chip_spec->prod_id !=VCNL4000_PROD_ID )dev_warn (&data->client->dev,"wrong device id, use vcnl4000" );break ;case VCNL4010_PROD_ID : -if (data->id !=VCNL4010 ) +if (data->chip_spec->prod_id !=VCNL4010_PROD_ID )dev_warn (&data->client->dev,"wrong device id, use vcnl4010/4020" );break ;
@@ -1901,6 +1902,7 @@ static const struct vcnl4000_chip_spec vcnl4000_chip_spec_cfg[] = { .int_reg = VCNL4040_INT_FLAGS, .ps_it_times = &vcnl4040_ps_it_times, .num_ps_it_times = ARRAY_SIZE(vcnl4040_ps_it_times), + .prod_id = VCNL4040_PROD_ID, }, [VCNL4000] = { .prod = "VCNL4000",
@@ -1911,6 +1913,7 @@ static const struct vcnl4000_chip_spec vcnl4000_chip_spec_cfg[] = { .channels = vcnl4000_channels, .num_channels = ARRAY_SIZE(vcnl4000_channels), .info = &vcnl4000_info, + .prod_id = VCNL4000_PROD_ID, }, [VCNL4010] = { .prod = "VCNL4010/4020",
@@ -1924,6 +1927,7 @@ static const struct vcnl4000_chip_spec vcnl4000_chip_spec_cfg[] = { .irq_thread = vcnl4010_irq_thread, .trig_buffer_func = vcnl4010_trigger_handler, .buffer_setup_ops = &vcnl4010_buffer_ops, + .prod_id = VCNL4010_PROD_ID, }, [VCNL4040] = { .prod = "VCNL4040",
@@ -1941,6 +1945,7 @@ static const struct vcnl4000_chip_spec vcnl4000_chip_spec_cfg[] = { .als_it_times = &vcnl4040_als_it_times, .num_als_it_times = ARRAY_SIZE(vcnl4040_als_it_times), .ulux_step = 100000, + .prod_id = VCNL4040_PROD_ID, }, [VCNL4200] = { .prod = "VCNL4200",
@@ -1958,6 +1963,7 @@ static const struct vcnl4000_chip_spec vcnl4000_chip_spec_cfg[] = { .als_it_times = &vcnl4200_als_it_times, .num_als_it_times = ARRAY_SIZE(vcnl4200_als_it_times), .ulux_step = 24000, + .prod_id = VCNL4200_PROD_ID, }, };
Signature · 1 line
2.53.0
PATCH v3 2/6 iio: light: vcnl4000: drop enum id table in favor of chip structs
In reply to Erikas BitovtasInstead of creating an enum table with chip IDs, store pointers to structs directly. This drops the association between chip structs and enum IDs and allows for easier addition or removal of new devices.
--- drivers/iio/light/vcnl4000.c | 205 +++++++++++++++++++++---------------------- 1 file changed, 98 insertions(+), 107 deletions(-)
drivers/iio/light/vcnl4000.c +98 -107
@@ -185,14 +185,6 @@ static const int vcnl4040_ps_oversampling_ratio[] = {1, 2, 4, 8};#define VCNL4000_SLEEP_DELAY_MS 2000/* before we enter pm_runtime_suspend */ -enum vcnl4000_device_ids { -CM36672P , -VCNL4000 , -VCNL4010 , -VCNL4040 , -VCNL4200 , -}; -struct vcnl4200_channel {u8 reg;ktime_t last_measurement;
@@ -202,7 +194,6 @@ struct vcnl4200_channel {struct vcnl4000_data {struct i2c_client *client; -enum vcnl4000_device_ids id;int rev;int al_scale;int ps_scale;
@@ -237,18 +228,6 @@ struct vcnl4000_chip_spec {const int prod_id; }; -static const struct i2c_device_id vcnl4000_id[] = { - {"cm36672p" ,CM36672P }, - {"cm36686" ,VCNL4040 }, - {"vcnl4000" ,VCNL4000 }, - {"vcnl4010" ,VCNL4010 }, - {"vcnl4020" ,VCNL4010 }, - {"vcnl4040" ,VCNL4040 }, - {"vcnl4200" ,VCNL4200 }, - { } -}; -MODULE_DEVICE_TABLE (i2c, vcnl4000_id); -static int vcnl4000_set_power_state (struct vcnl4000_data *data,bool on) {/* no suspend op */
@@ -1889,82 +1868,84 @@ static const struct iio_info vcnl4040_info = { .read_avail = vcnl4040_read_avail, }; -static const struct vcnl4000_chip_spec vcnl4000_chip_spec_cfg[] = { - [CM36672P ] = { - .prod ="CM36672P" , - .init = vcnl4200_init, - .measure_proximity = vcnl4200_measure_proximity, - .set_power_state = vcnl4200_set_power_state, - .channels = cm36672p_channels, - .num_channels =ARRAY_SIZE (cm36672p_channels), - .info = &vcnl4040_info, - .irq_thread = vcnl4040_irq_thread, - .int_reg =VCNL4040_INT_FLAGS , - .ps_it_times = &vcnl4040_ps_it_times, - .num_ps_it_times =ARRAY_SIZE (vcnl4040_ps_it_times), - .prod_id =VCNL4040_PROD_ID , - }, - [VCNL4000 ] = { - .prod ="VCNL4000" , - .init = vcnl4000_init, - .measure_light = vcnl4000_measure_light, - .measure_proximity = vcnl4000_measure_proximity, - .set_power_state = vcnl4000_set_power_state, - .channels = vcnl4000_channels, - .num_channels =ARRAY_SIZE (vcnl4000_channels), - .info = &vcnl4000_info, - .prod_id =VCNL4000_PROD_ID , - }, - [VCNL4010 ] = { - .prod ="VCNL4010/4020" , - .init = vcnl4000_init, - .measure_light = vcnl4000_measure_light, - .measure_proximity = vcnl4000_measure_proximity, - .set_power_state = vcnl4000_set_power_state, - .channels = vcnl4010_channels, - .num_channels =ARRAY_SIZE (vcnl4010_channels), - .info = &vcnl4010_info, - .irq_thread = vcnl4010_irq_thread, - .trig_buffer_func = vcnl4010_trigger_handler, - .buffer_setup_ops = &vcnl4010_buffer_ops, - .prod_id =VCNL4010_PROD_ID , - }, - [VCNL4040 ] = { - .prod ="VCNL4040" , - .init = vcnl4200_init, - .measure_light = vcnl4200_measure_light, - .measure_proximity = vcnl4200_measure_proximity, - .set_power_state = vcnl4200_set_power_state, - .channels = vcnl4040_channels, - .num_channels =ARRAY_SIZE (vcnl4040_channels), - .info = &vcnl4040_info, - .irq_thread = vcnl4040_irq_thread, - .int_reg =VCNL4040_INT_FLAGS , - .ps_it_times = &vcnl4040_ps_it_times, - .num_ps_it_times =ARRAY_SIZE (vcnl4040_ps_it_times), - .als_it_times = &vcnl4040_als_it_times, - .num_als_it_times =ARRAY_SIZE (vcnl4040_als_it_times), - .ulux_step =100000 , - .prod_id =VCNL4040_PROD_ID , - }, - [VCNL4200 ] = { - .prod ="VCNL4200" , - .init = vcnl4200_init, - .measure_light = vcnl4200_measure_light, - .measure_proximity = vcnl4200_measure_proximity, - .set_power_state = vcnl4200_set_power_state, - .channels = vcnl4040_channels, - .num_channels =ARRAY_SIZE (vcnl4000_channels), - .info = &vcnl4040_info, - .irq_thread = vcnl4040_irq_thread, - .int_reg =VCNL4200_INT_FLAGS , - .ps_it_times = &vcnl4200_ps_it_times, - .num_ps_it_times =ARRAY_SIZE (vcnl4200_ps_it_times), - .als_it_times = &vcnl4200_als_it_times, - .num_als_it_times =ARRAY_SIZE (vcnl4200_als_it_times), - .ulux_step =24000 , - .prod_id =VCNL4200_PROD_ID , - }, +static const struct vcnl4000_chip_spec cm36672p_spec = { + .prod ="CM36672P" , + .init = vcnl4200_init, + .measure_proximity = vcnl4200_measure_proximity, + .set_power_state = vcnl4200_set_power_state, + .channels = cm36672p_channels, + .num_channels =ARRAY_SIZE (cm36672p_channels), + .info = &vcnl4040_info, + .irq_thread = vcnl4040_irq_thread, + .int_reg =VCNL4040_INT_FLAGS , + .ps_it_times = &vcnl4040_ps_it_times, + .num_ps_it_times =ARRAY_SIZE (vcnl4040_ps_it_times), + .prod_id =VCNL4040_PROD_ID , +}; + +static const struct vcnl4000_chip_spec vcnl4000_spec = { + .prod ="VCNL4000" , + .init = vcnl4000_init, + .measure_light = vcnl4000_measure_light, + .measure_proximity = vcnl4000_measure_proximity, + .set_power_state = vcnl4000_set_power_state, + .channels = vcnl4000_channels, + .num_channels =ARRAY_SIZE (vcnl4000_channels), + .info = &vcnl4000_info, + .prod_id =VCNL4000_PROD_ID , +}; + +static const struct vcnl4000_chip_spec vcnl4010_spec = { + .prod ="VCNL4010/4020" , + .init = vcnl4000_init, + .measure_light = vcnl4000_measure_light, + .measure_proximity = vcnl4000_measure_proximity, + .set_power_state = vcnl4000_set_power_state, + .channels = vcnl4010_channels, + .num_channels =ARRAY_SIZE (vcnl4010_channels), + .info = &vcnl4010_info, + .irq_thread = vcnl4010_irq_thread, + .trig_buffer_func = vcnl4010_trigger_handler, + .buffer_setup_ops = &vcnl4010_buffer_ops, + .prod_id =VCNL4010_PROD_ID , +}; + +static const struct vcnl4000_chip_spec vcnl4040_spec = { + .prod ="VCNL4040" , + .init = vcnl4200_init, + .measure_light = vcnl4200_measure_light, + .measure_proximity = vcnl4200_measure_proximity, + .set_power_state = vcnl4200_set_power_state, + .channels = vcnl4040_channels, + .num_channels =ARRAY_SIZE (vcnl4040_channels), + .info = &vcnl4040_info, + .irq_thread = vcnl4040_irq_thread, + .int_reg =VCNL4040_INT_FLAGS , + .ps_it_times = &vcnl4040_ps_it_times, + .num_ps_it_times =ARRAY_SIZE (vcnl4040_ps_it_times), + .als_it_times = &vcnl4040_als_it_times, + .num_als_it_times =ARRAY_SIZE (vcnl4040_als_it_times), + .ulux_step =100000 , + .prod_id =VCNL4040_PROD_ID , +}; + +static const struct vcnl4000_chip_spec vcnl4200_spec = { + .prod ="VCNL4200" , + .init = vcnl4200_init, + .measure_light = vcnl4200_measure_light, + .measure_proximity = vcnl4200_measure_proximity, + .set_power_state = vcnl4200_set_power_state, + .channels = vcnl4040_channels, + .num_channels =ARRAY_SIZE (vcnl4000_channels), + .info = &vcnl4040_info, + .irq_thread = vcnl4040_irq_thread, + .int_reg =VCNL4200_INT_FLAGS , + .ps_it_times = &vcnl4200_ps_it_times, + .num_ps_it_times =ARRAY_SIZE (vcnl4200_ps_it_times), + .als_it_times = &vcnl4200_als_it_times, + .num_als_it_times =ARRAY_SIZE (vcnl4200_als_it_times), + .ulux_step =24000 , + .prod_id =VCNL4200_PROD_ID , };static const struct iio_trigger_ops vcnl4010_trigger_ops = {
@@ -1991,7 +1972,6 @@ static int vcnl4010_probe_trigger(struct iio_dev *indio_dev)static int vcnl4000_probe (struct i2c_client *client) { -const struct i2c_device_id *id =i2c_client_get_device_id (client);const char *const regulator_names[] = {"vdd" ,"vio" ,"vled" };struct device *dev = &client->dev;struct vcnl4000_data *data;
@@ -2005,8 +1985,7 @@ static int vcnl4000_probe(struct i2c_client *client) data =iio_priv (indio_dev);i2c_set_clientdata (client, indio_dev); data->client = client; - data->id = id->driver_data; - data->chip_spec = &vcnl4000_chip_spec_cfg[data->id]; + data->chip_spec =i2c_get_match_data (client); ret =devm_regulator_bulk_get_enable (dev,ARRAY_SIZE (regulator_names), regulator_names);
@@ -2081,32 +2060,32 @@ static int vcnl4000_probe(struct i2c_client *client)static const struct of_device_id vcnl_4000_of_match[] = { { .compatible ="capella,cm36672p" , - .data = (void *)CM36672P , + .data = &cm36672p_spec, },/* Capella CM36686 is fully compatible with Vishay VCNL4040 */ { .compatible ="capella,cm36686" , - .data = (void *)VCNL4040 , + .data = &vcnl4040_spec, }, { .compatible ="vishay,vcnl4000" , - .data = (void *)VCNL4000 , + .data = &vcnl4000_spec, }, { .compatible ="vishay,vcnl4010" , - .data = (void *)VCNL4010 , + .data = &vcnl4010_spec, }, { .compatible ="vishay,vcnl4020" , - .data = (void *)VCNL4010 , + .data = &vcnl4010_spec, }, { .compatible ="vishay,vcnl4040" , - .data = (void *)VCNL4040 , + .data = &vcnl4040_spec, }, { .compatible ="vishay,vcnl4200" , - .data = (void *)VCNL4200 , + .data = &vcnl4200_spec, }, { } };
@@ -2148,6 +2127,18 @@ static int vcnl4000_runtime_resume(struct device *dev) static DEFINE_RUNTIME_DEV_PM_OPS(vcnl4000_pm_ops, vcnl4000_runtime_suspend, vcnl4000_runtime_resume, NULL); +static const struct i2c_device_id vcnl4000_id[] = { + {"cm36672p" , (kernel_ulong_t)&cm36672p_spec }, + {"cm36686" , (kernel_ulong_t)&vcnl4040_spec }, + {"vcnl4000" , (kernel_ulong_t)&vcnl4000_spec }, + {"vcnl4010" , (kernel_ulong_t)&vcnl4010_spec }, + {"vcnl4020" , (kernel_ulong_t)&vcnl4010_spec }, + {"vcnl4040" , (kernel_ulong_t)&vcnl4040_spec }, + {"vcnl4200" , (kernel_ulong_t)&vcnl4200_spec }, + { } +}; +MODULE_DEVICE_TABLE (i2c, vcnl4000_id); +static struct i2c_driver vcnl4000_driver = { .driver = { .name =VCNL4000_DRV_NAME ,
Signature · 1 line
2.53.0
Re: [PATCH v3 2/6] iio: light: vcnl4000: drop enum id table in favor of chip structs
Quoted 3 lines · Erikas Bitovtas
Instead of creating an enum table with chip IDs, store pointers to structs directly. This drops the association between chip structs and enum IDs and allows for easier addition or removal of new devices.
Signature · 2 lines
With Best Regards, Andy Shevchenko
PATCH v3 3/6 iio: light: vcnl4000: move device tree entries into one line
In reply to Erikas BitovtasMake device tree entries one line each to save space and LOC.
--- drivers/iio/light/vcnl4000.c | 35 +++++++---------------------------- 1 file changed, 7 insertions(+), 28 deletions(-)
drivers/iio/light/vcnl4000.c +7 -28
@@ -2058,35 +2058,14 @@ static int vcnl4000_probe(struct i2c_client *client) }static const struct of_device_id vcnl_4000_of_match[] = { - { - .compatible ="capella,cm36672p" , - .data = &cm36672p_spec, - }, + { .compatible ="capella,cm36672p" , .data = &cm36672p_spec, },/* Capella CM36686 is fully compatible with Vishay VCNL4040 */ - { - .compatible ="capella,cm36686" , - .data = &vcnl4040_spec, - }, - { - .compatible ="vishay,vcnl4000" , - .data = &vcnl4000_spec, - }, - { - .compatible ="vishay,vcnl4010" , - .data = &vcnl4010_spec, - }, - { - .compatible ="vishay,vcnl4020" , - .data = &vcnl4010_spec, - }, - { - .compatible ="vishay,vcnl4040" , - .data = &vcnl4040_spec, - }, - { - .compatible ="vishay,vcnl4200" , - .data = &vcnl4200_spec, - }, + { .compatible ="capella,cm36686" , .data = &vcnl4040_spec, }, + { .compatible ="vishay,vcnl4000" , .data = &vcnl4000_spec, }, + { .compatible ="vishay,vcnl4010" , .data = &vcnl4010_spec, }, + { .compatible ="vishay,vcnl4020" , .data = &vcnl4010_spec, }, + { .compatible ="vishay,vcnl4040" , .data = &vcnl4040_spec, }, + { .compatible ="vishay,vcnl4200" , .data = &vcnl4200_spec, }, { } };MODULE_DEVICE_TABLE (of, vcnl_4000_of_match);
Signature · 1 line
2.53.0
Re: [PATCH v3 3/6] iio: light: vcnl4000: move device tree entries into one line
Quoted 1 line · Erikas Bitovtas
Make device tree entries one line each to save space and LOC.
...
drivers/iio/light/vcnl4000.c static int vcnl4000_probe(struct i2c_client *client) · line 2061
Quoted 1 line
drivers/iio/light/vcnl4000.c +1
-0+ { .compatible = "capella,cm36672p", .data = &cm36672p_spec, },
When it's a single line the inner comma(s) is not needed
{ .compatible = "capella,cm36672p", .data = &cm36672p_spec },Signature · 2 lines
With Best Regards, Andy Shevchenko
PATCH v3 4/6 iio: light: vcnl4000: move power state function into device-managed action
In reply to Erikas BitovtasMove power state setting into a device-managed action to get rid of fail_poweroff goto label and remove it from vcnl4000_remove() function.
--- drivers/iio/light/vcnl4000.c | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-)
drivers/iio/light/vcnl4000.c +21 -11
@@ -1970,6 +1970,18 @@ static int vcnl4010_probe_trigger(struct iio_dev *indio_dev)return devm_iio_trigger_register (&client->dev, trigger); } +static void vcnl4000_cleanup (void *data) +{ +struct iio_dev *indio_dev = data; +struct vcnl4000_data *chip =iio_priv (indio_dev); +struct device *dev = &chip->client->dev; +int ret; + + ret = chip->chip_spec->set_power_state (chip, false); +if (ret) +dev_warn (dev,"Failed to power down (%pe)" ,ERR_PTR (ret)); +} +static int vcnl4000_probe (struct i2c_client *client) {const char *const regulator_names[] = {"vdd" ,"vio" ,"vled" };
@@ -2004,6 +2016,10 @@ static int vcnl4000_probe(struct i2c_client *client)if (ret)return ret; + ret =devm_add_action_or_reset (dev, vcnl4000_cleanup, indio_dev); +if (ret) +return ret; +dev_dbg (dev,"%s Ambient light/proximity sensor, Rev: %02x\n" , data->chip_spec->prod, data->rev);
@@ -2041,19 +2057,20 @@ static int vcnl4000_probe(struct i2c_client *client) ret =pm_runtime_set_active (dev);if (ret <0 ) - goto fail_poweroff; +return ret; ret =iio_device_register (indio_dev);if (ret <0 ) - goto fail_poweroff; + goto fail_register;pm_runtime_enable (dev);pm_runtime_set_autosuspend_delay (dev,VCNL4000_SLEEP_DELAY_MS );pm_runtime_use_autosuspend (dev);return 0 ; -fail_poweroff: - data->chip_spec->set_power_state (data, false); + +fail_register: +pm_runtime_set_suspended (dev);return ret; }
@@ -2073,18 +2090,11 @@ MODULE_DEVICE_TABLE(of, vcnl_4000_of_match);static void vcnl4000_remove (struct i2c_client *client) {struct iio_dev *indio_dev =i2c_get_clientdata (client); -struct vcnl4000_data *data =iio_priv (indio_dev); -int ret;pm_runtime_dont_use_autosuspend (&client->dev);pm_runtime_disable (&client->dev);iio_device_unregister (indio_dev);pm_runtime_set_suspended (&client->dev); - - ret = data->chip_spec->set_power_state (data, false); -if (ret) -dev_warn (&client->dev,"Failed to power down (%pe)\n" , -ERR_PTR (ret)); }static int vcnl4000_runtime_suspend (struct device *dev)
Signature · 1 line
2.53.0
PATCH v3 5/6 iio: light: vcnl4000: make pm_runtime_enable() device-managed
In reply to Erikas BitovtasReplace pm_runtime_set_active() and pm_runtime_enable() with their device-managed counterpart to remove them from vcnl4000_remove().
--- drivers/iio/light/vcnl4000.c | 14 +++----------- 1 file changed, 3 insertions(+), 11 deletions(-)
drivers/iio/light/vcnl4000.c +3 -11
@@ -2055,23 +2055,18 @@ static int vcnl4000_probe(struct i2c_client *client)return ret; } - ret =pm_runtime_set_active (dev); -if (ret <0 ) + ret =devm_pm_runtime_set_active_enabled (dev); +if (ret)return ret; ret =iio_device_register (indio_dev);if (ret <0 ) - goto fail_register; +return ret; -pm_runtime_enable (dev);pm_runtime_set_autosuspend_delay (dev,VCNL4000_SLEEP_DELAY_MS );pm_runtime_use_autosuspend (dev);return 0 ; - -fail_register: -pm_runtime_set_suspended (dev); -return ret; }static const struct of_device_id vcnl_4000_of_match[] = {
@@ -2091,10 +2086,7 @@ static void vcnl4000_remove(struct i2c_client *client) {struct iio_dev *indio_dev =i2c_get_clientdata (client); -pm_runtime_dont_use_autosuspend (&client->dev); -pm_runtime_disable (&client->dev);iio_device_unregister (indio_dev); -pm_runtime_set_suspended (&client->dev); }static int vcnl4000_runtime_suspend (struct device *dev)
Signature · 1 line
2.53.0
Re: [PATCH v3 5/6] iio: light: vcnl4000: make pm_runtime_enable() device-managed
Quoted 2 lines · Erikas Bitovtas
Replace
pm_runtime_set_active()andpm_runtime_enable()with their device-managed counterpart to remove them fromvcnl4000_remove().
This sounds like almost no changes, the little detail is that now in case of iio_device_register() failure the pm_runtime_dont_use_autosuspend() will also be called, which I think is fine.
Signature · 2 lines
With Best Regards, Andy Shevchenko
PATCH v3 6/6 iio: light: vcnl4000: register an IIO device with a device-managed function
In reply to Erikas BitovtasUse a device-managed counterpart of iio_device_register() and remove the redundant iio_device_unregister() call in driver remove function, allowing us to remove vcnl4000_remove() function altogether.
--- drivers/iio/light/vcnl4000.c | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-)
drivers/iio/light/vcnl4000.c +2 -10
@@ -2059,8 +2059,8 @@ static int vcnl4000_probe(struct i2c_client *client)if (ret)return ret; - ret =iio_device_register (indio_dev); -if (ret <0 ) + ret =devm_iio_device_register (dev, indio_dev); +if (ret)return ret;pm_runtime_set_autosuspend_delay (dev,VCNL4000_SLEEP_DELAY_MS );
@@ -2082,13 +2082,6 @@ static const struct of_device_id vcnl_4000_of_match[] = { };MODULE_DEVICE_TABLE (of, vcnl_4000_of_match); -static void vcnl4000_remove (struct i2c_client *client) -{ -struct iio_dev *indio_dev =i2c_get_clientdata (client); - -iio_device_unregister (indio_dev); -} -static int vcnl4000_runtime_suspend (struct device *dev) {struct iio_dev *indio_dev =i2c_get_clientdata (to_i2c_client (dev));
@@ -2128,7 +2121,6 @@ static struct i2c_driver vcnl4000_driver = { }, .probe = vcnl4000_probe, .id_table = vcnl4000_id, - .remove = vcnl4000_remove, };module_i2c_driver (vcnl4000_driver);
Signature · 1 line
2.53.0
Re: [PATCH v3 6/6] iio: light: vcnl4000: register an IIO device with a device-managed function
Quoted 3 lines · Erikas Bitovtas
Use a device-managed counterpart of
iio_device_register()and remove the redundantiio_device_unregister()call in driver remove function, allowing us to removevcnl4000_remove()function altogether.
Signature · 2 lines
With Best Regards, Andy Shevchenko