ASoC: dt-bindings: rockchip: convert rk3399-gru-sound to DT Schema
Subsystems (4)
PATCH v2 1/1 ASoC: dt-bindings: rockchip: convert rk3399-gru-sound to DT Schema
Convert the rockchip,rk3399-gru-sound.txt DT binding to DT Schema format.
Update rockchip,cpu from a single I2S controller phandle to a phandle-array. Add an optional second entry for the SPDIF controller, as seen in rk3399-gru.dtsi, required by boards with DisplayPort audio.
---
Changes in v2:
- Fix subject and body: "YAML Schema" -> "DT Schema"
- Fix title: "ROCKCHIP" -> "Rockchip"
- List items for rockchip,cpu with I2S and SPDIF descriptions
- List items for rockchip,codec
- Update descriptions for rockchip,cpu, rockchip,codec and dmic-wakeup-delay-ms
.../sound/rockchip,rk3399-gru-sound.txt | 22 ------- .../sound/rockchip,rk3399-gru-sound.yaml | 60 +++++++++++++++++++ 2 files changed, 60 insertions(+), 22 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/rockchip,rk3399-gru-sound.txt create mode 100644 Documentation/devicetree/bindings/sound/rockchip,rk3399-gru-sound.yaml
Documentation/devicetree/bindings/sound/rockchip,rk3399-gru-sound.txt deleted +0 -22
@@ -1,22 +0,0 @@ -ROCKCHIP with MAX98357A/RT5514/DA7219 codecs on GRU boards - -Required properties: -- compatible: "rockchip,rk3399-gru-sound" -- rockchip,cpu: The phandle of the Rockchip I2S controller that's - connected to the codecs -- rockchip,codec: The phandle of the audio codecs - -Optional properties: -- dmic-wakeup-delay-ms : specify delay time (ms) for DMIC ready. - If this option is specified, which means it's required dmic need - delay for DMIC to ready so that rt5514 can avoid recording before - DMIC send valid data - -Example: - -sound { - compatible = "rockchip,rk3399-gru-sound"; - rockchip,cpu = <&i2s0>; - rockchip,codec = <&max98357a &rt5514 &da7219>; - dmic-wakeup-delay-ms = <20>; -};
Documentation/devicetree/bindings/sound/rockchip,rk3399-gru-sound.yaml new file +60 -0
60 lines not on this page · raw message
Signature · 1 line
2.43.0
Quoted 8 lines · Anushka Badhe
Convert the rockchip,rk3399-gru-sound.txt DT binding to DT Schema format.
Update rockchip,cpu from a single I2S controller phandle to a phandle-array. Add an optional second entry for the SPDIF controller, as seen in
rk3399-gru.dtsi, required by boards with DisplayPort audio.Signed-off-by Anushka Badhe <[email protected]>
Quoted 8 lines
---
Changes in v2:
- Fix subject and body: "YAML Schema" -> "DT Schema"
- Fix title: "ROCKCHIP" -> "Rockchip"
- List items for rockchip,cpu with I2S and SPDIF descriptions
- List items for rockchip,codec
- Update descriptions for rockchip,cpu, rockchip,codec and dmic-wakeup-delay-ms
Best regards,
Krzysztof
Mark Brown
maintainerQuoted 1 line · Anushka Badhe
ASoC: dt-bindings: rockchip: convert rk3399-gru-sound to DT Schema
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-7.1
Thanks!
[1/1] ASoC: dt-bindings: rockchip: convert rk3399-gru-sound to DT Schema
https://git.kernel.org/broonie/sound/c/115e7d764dad
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark