Add StarFive JHB100 soc BMC DRD USB support
Minda Chen
maintainerv2 cover Add StarFive JHB100 soc BMC DRD USB support
JHB100 is a Starfive new RISC-V SoC for datacenter BMC (Baseboard Managent Controller). Similar with Aspeed 27x0.
The JHB100 minimal system upstream is in progress:
https://patchwork.kernel.org/project/linux-riscv/cover/[email protected]/
JHB100 contain 2 USB 2.0 dwc3 USB port, and integrated with USB 2.0 PHY. These 2 ports just for BMC soc use. Actually JHB100 contain other dwc3 usb controllers, which is using as xhci over PCIe and locate in PCIe EP. It is working for host server. But now PCIe EP driver is not in upstream progress. So just commit BMC USB 2.0 port driver patches to upstream first.
The patch base in V7.0-rc5
changes form v1:
1. Add review tag to patch1
2.v1 patch 2 delte one more line, v2 just add device compatible.
Minda Chen (2):
dt-bindings: usb: dwc3: add support for StarFive JHB100
usb: dwc3: starfive: Add JHB100 USB 2.0 DRD controller
.../bindings/usb/starfive,jhb100-dwc3.yaml | 64 +++++++++++++++++++ MAINTAINERS | 3 +- drivers/usb/dwc3/dwc3-generic-plat.c | 1 + 3 files changed, 67 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/usb/starfive,jhb100-dwc3.yaml
base-commit: c369299895a591d96745d6492d4888259b004a9e
Signature · 1 line
2.17.1
Minda Chen
maintainerPATCH v2 1/2 dt-bindings: usb: dwc3: add support for StarFive JHB100
Add support for the USB 2.0 Dual-Role Device (DRD) controller embedded in the StarFive JHB100 SoC. The controller is based on the Synopsys DesignWare Core USB 3 (DWC3) IP.
--- .../bindings/usb/starfive,jhb100-dwc3.yaml | 64 +++++++++++++++++++ MAINTAINERS | 3 +- 2 files changed, 66 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/usb/starfive,jhb100-dwc3.yaml
Documentation/devicetree/bindings/usb/starfive,jhb100-dwc3.yaml new file +64 -0
@@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/starfive,jhb100-dwc3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JHB100 DWC3 USB SoC Controller + +maintainers: + - Minda Chen <[email protected]> + +description: + The USB DRD controller on JHB100 BMC SoC. + +allOf: + - $ref: snps,dwc3-common.yaml# + +properties: + compatible: + const: starfive,jhb100-dwc3 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: USB main enable clk + - description: DWC3 bus early clock + - description: DWC3 ref clock + + clock-names: + items: + - const: main + - const: bus_early + - const: ref + + resets: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + +unevaluatedProperties: false + +examples: + - | + usb@11800000 { + compatible = "starfive,jhb100-dwc3"; + reg = <0x11800000 0x10000>; + clocks = <&usbcrg 9>, + <&usbcrg 5>, + <&usbcrg 6>; + clock-names = "main", "bus_early", "ref"; + resets = <&usbcrg 4>; + interrupts = <105>; + dr_mode = "host"; + };
MAINTAINERS +2 -1
@@ -25252,10 +25252,11 @@ F: Documentation/devicetree/bindings/reset/starfive,jh7100-reset.yaml F: drivers/reset/starfive/reset-starfive-jh71* F: include/dt-bindings/reset/starfive?jh71*.h -STARFIVE JH71X0 USB DRIVERS +STARFIVE USB DRIVERS M: Minda Chen <[email protected]> S: Maintained F: Documentation/devicetree/bindings/usb/starfive,jh7110-usb.yaml +F: Documentation/devicetree/bindings/usb/starfive,jhb100-dwc3.yaml F: drivers/usb/cdns3/cdns3-starfive.c STARFIVE JH71XX PMU CONTROLLER DRIVER
Signature · 1 line
2.17.1
Minda Chen
maintainerPATCH v2 2/2 usb: dwc3: starfive: Add JHB100 USB 2.0 DRD controller
In reply to Minda ChenJHB100 contains 2 dwc3 USB controllers and PHYs and working as USB 2.0 speed. It can working in generic platform and setting default properties.
--- drivers/usb/dwc3/dwc3-generic-plat.c | 1 + 1 file changed, 1 insertion(+)
drivers/usb/dwc3/dwc3-generic-plat.c +1 -0
@@ -214,6 +214,7 @@ static const struct of_device_id dwc3_generic_of_match[] = { { .compatible = "spacemit,k1-dwc3", }, { .compatible = "fsl,ls1028a-dwc3", &fsl_ls1028_dwc3}, { .compatible = "eswin,eic7700-dwc3", &eic7700_dwc3}, + { .compatible = "starfive,jhb100-dwc3", }, {/* sentinel */ } };MODULE_DEVICE_TABLE (of, dwc3_generic_of_match);
Signature · 1 line
2.17.1
Re: [PATCH v2 2/2] usb: dwc3: starfive: Add JHB100 USB 2.0 DRD controller
Quoted 24 lines · Minda Chen
JHB100 contains 2 dwc3 USB controllers and PHYs and working as USB 2.0 speed. It can working in generic platform and setting default properties.
Signed-off-by Minda Chen <[email protected]>--- drivers/usb/dwc3/dwc3-generic-plat.c | 1 + 1 file changed, 1 insertion(+)drivers/usb/dwc3/dwc3-generic-plat.c +1
-0@@ -214,6 +214,7 @@ static const struct of_device_id dwc3_generic_of_match[] = { { .compatible = "spacemit,k1-dwc3", }, { .compatible = "fsl,ls1028a-dwc3", &fsl_ls1028_dwc3}, { .compatible = "eswin,eic7700-dwc3", &eic7700_dwc3}, + { .compatible = "starfive,jhb100-dwc3", }, {/* sentinel */ } };MODULE_DEVICE_TABLE (of, dwc3_generic_of_match);Signature · 1 line
2.17.1
BR,
Thinh