Skip to contentSkip to conversation

crypto: atmel-ecc - add support for atecc608b

PATCH RESEND In review Thorsten Blum 2 participants 3 messages Apr 12 – May 5

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH RESEND 1/2 crypto: atmel-ecc - add support for atecc608b

Tested on hardware with an ATECC608B at 0x60. The device binds successfully, passes the driver's sanity check, and registers the ecdh-nist-p256 KPP algorithm.

The hardware ECDH path was also exercised using a minimal KPP test module, covering private key generation, public key derivation, and shared secret computation.

---
Resending to include linux-crypto in patch 2/2.

---
 drivers/crypto/atmel-ecc.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/crypto/atmel-ecc.c +3 -0
index b6a77c8d439c..5793e0c44113 100644
@@ -371,6 +371,8 @@ static void atmel_ecc_remove(struct i2c_client *client)
 static const struct of_device_id atmel_ecc_dt_ids[] = {
 	{
 		.compatible = "atmel,atecc508a",
+	}, {
+		.compatible = "atmel,atecc608b",
 	}, {
 		/* sentinel */
 	}
@@ -380,6 +382,7 @@ MODULE_DEVICE_TABLE(of, atmel_ecc_dt_ids);
 
 static const struct i2c_device_id atmel_ecc_id[] = {
 	{ "atecc508a" },
+	{ "atecc608b" },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, atmel_ecc_id);
#1 lore raw

PATCH RESEND 2/2 dt-bindings: trivial-devices: add atmel,atecc608b

Add entry for ATECC608B. Update the ATECC508A comment for consistency.

---
Resending to include
Cc: Herbert Xu <[email protected]>
Cc: [email protected]

---
 Documentation/devicetree/bindings/trivial-devices.yaml | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/trivial-devices.yaml +3 -1
index a482aeadcd44..9da4c73b23cf 100644
@@ -63,8 +63,10 @@ properties:
           - arduino,unoq-mcu
             # Temperature monitoring of Astera Labs PT5161L PCIe retimer
           - asteralabs,pt5161l
-            # i2c h/w elliptic curve crypto module
+            # ATECC508A - i2c h/w elliptic curve crypto module
           - atmel,atecc508a
+            # ATECC608B - i2c h/w elliptic curve crypto module
+          - atmel,atecc608b
             # ATSHA204 - i2c h/w symmetric crypto module
           - atmel,atsha204
             # ATSHA204A - i2c h/w symmetric crypto module
maintainer
#2 lore raw
In reply to Thorsten Blum
Quoted 8 lines · Thorsten Blum

Tested on hardware with an ATECC608B at 0x60. The device binds successfully, passes the driver's sanity check, and registers the ecdh-nist-p256 KPP algorithm.

The hardware ECDH path was also exercised using a minimal KPP test module, covering private key generation, public key derivation, and shared secret computation.

Quoted 6 lines

---
Resending to include linux-crypto in patch 2/2.

---
 drivers/crypto/atmel-ecc.c | 3 +++
 1 file changed, 3 insertions(+)

All applied. Thanks.

Signature · 3 lines
Email: Herbert Xu <[email protected]>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt