{linux, linux-headers}: bump 6.{1, 6, 12, 18, 19}.x series
PATCH 1/4 {linux, linux-headers}: bump 6.{1, 6, 12, 18, 19}.x series
Signed-off-by Bernd Kuhls <[email protected]>
---
linux/{6.19.11 => 6.19.12} | 0
linux/Config.in | 2 +-
linux/before-6.17/linux.hash | 6 +++---
linux/from-6.17/linux.hash | 4 ++--
package/linux-headers/{6.1.167 => 6.1.168} | 0
package/linux-headers/{6.12.80 => 6.12.81} | 0
package/linux-headers/{6.18.21 => 6.18.22} | 0
package/linux-headers/{6.19.11 => 6.19.12} | 0
package/linux-headers/{6.6.132 => 6.6.134} | 0
package/linux-headers/Config.in.host | 10 +++++-----
10 files changed, 11 insertions(+), 11 deletions(-)
rename linux/{6.19.11 => 6.19.12} (100%)
rename package/linux-headers/{6.1.167 => 6.1.168} (100%)
rename package/linux-headers/{6.12.80 => 6.12.81} (100%)
rename package/linux-headers/{6.18.21 => 6.18.22} (100%)
rename package/linux-headers/{6.19.11 => 6.19.12} (100%)
rename package/linux-headers/{6.6.132 => 6.6.134} (100%)linux/6.19.12 renamed from linux/6.19.11 +0 -0
linux/Config.in +1 -1
@@ -141,7 +141,7 @@ config BR2_LINUX_KERNEL_CUSTOM_REPO_GIT_SUBMODULES config BR2_LINUX_KERNEL_VERSION string - default "6.19.11" if BR2_LINUX_KERNEL_LATEST_VERSION + default "6.19.12" if BR2_LINUX_KERNEL_LATEST_VERSION default "5.10.246-cip66" if BR2_LINUX_KERNEL_LATEST_CIP_VERSION default "5.10.246-cip66-rt29" if BR2_LINUX_KERNEL_LATEST_CIP_RT_VERSION default BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE \
linux/before-6.17/linux.hash +3 -3
@@ -1,7 +1,7 @@ # From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc -sha256 c92591d896e79ecddbc3319136f0c2f855e832b397de7593f013ad7590a43e53 linux-6.12.80.tar.xz -sha256 c5b62bbb104f5fddf6be6f50ebd170146c1995d2cc84e591a914decb4b6b2eb4 linux-6.6.132.tar.xz -sha256 2818053c07976ba4ed5f44deb0f5dc7ae7b0975d7918c313d48d8fe7c4e598cb linux-6.1.167.tar.xz +sha256 c2b09c3643946a7097c5371e1dcb123c66505ea30fafd0b0a22dc1d5f0228847 linux-6.12.81.tar.xz +sha256 6378697b36376bf4e727a47402fee340ca4e3b146d5b407d3753cbff300f37bf linux-6.6.134.tar.xz +sha256 e0856fe51e444986425886533ebb91d8540189e80c3f0365c76e4beb7439776e linux-6.1.168.tar.xz # From https://www.kernel.org/pub/linux/kernel/v5.x/sha256sums.asc sha256 0bc1bdf74957e276793691865ffb71505809706d9243a42e9704aad0f128cdd4 linux-5.15.202.tar.xz sha256 34b3fbe2c9eeb767fc7eea4b9516e0dd44b79401ceb13e41713096b8eb270afb linux-5.10.252.tar.xz
linux/from-6.17/linux.hash +2 -2
@@ -1,6 +1,6 @@ # From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc -sha256 20039d7b6b256c08be2f8fac43c3ff9a620308c703c643cf2f80c3910b9bd59b linux-6.19.11.tar.xz -sha256 1c38214fb137bae85b82b82537b5987358621b915ab2a8e4f09e60697c19474f linux-6.18.21.tar.xz +sha256 ce5c4f1205f9729286b569b037649591555f31ca1e03cc504bd3b70b8e58a8d5 linux-6.19.12.tar.xz +sha256 a23c92faf3657385c2c6b5f4edd8f81b808907ebe603fa30699eae224da55f59 linux-6.18.22.tar.xz # Licenses hashes sha256 fb5a425bd3b3cd6071a3a9aff9909a859e7c1158d54d32e07658398cd67eb6a0 COPYING
package/linux-headers/6.1.168 renamed from package/linux-headers/6.1.167 +0 -0
package/linux-headers/6.12.81 renamed from package/linux-headers/6.12.80 +0 -0
package/linux-headers/6.18.22 renamed from package/linux-headers/6.18.21 +0 -0
package/linux-headers/6.19.12 renamed from package/linux-headers/6.19.11 +0 -0
package/linux-headers/6.6.134 renamed from package/linux-headers/6.6.132 +0 -0
package/linux-headers/Config.in.host +5 -5
@@ -466,11 +466,11 @@ config BR2_DEFAULT_KERNEL_HEADERS string default "5.10.252" if BR2_KERNEL_HEADERS_5_10 default "5.15.202" if BR2_KERNEL_HEADERS_5_15 - default "6.1.167" if BR2_KERNEL_HEADERS_6_1 - default "6.6.132" if BR2_KERNEL_HEADERS_6_6 - default "6.12.80" if BR2_KERNEL_HEADERS_6_12 - default "6.18.21" if BR2_KERNEL_HEADERS_6_18 - default "6.19.11" if BR2_KERNEL_HEADERS_6_19 + default "6.1.168" if BR2_KERNEL_HEADERS_6_1 + default "6.6.134" if BR2_KERNEL_HEADERS_6_6 + default "6.12.81" if BR2_KERNEL_HEADERS_6_12 + default "6.18.22" if BR2_KERNEL_HEADERS_6_18 + default "6.19.12" if BR2_KERNEL_HEADERS_6_19 default BR2_DEFAULT_KERNEL_VERSION if BR2_KERNEL_HEADERS_VERSION default "custom" if BR2_KERNEL_HEADERS_CUSTOM_TARBALL default BR2_KERNEL_HEADERS_CUSTOM_REPO_VERSION \
Signature · 6 lines
2.47.3 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH 2/4 package/strace: fix build with linux-7.0
Add three upstream patches to fix build with the upcoming bump of the linux kernel to 7.0.
Signed-off-by Bernd Kuhls <[email protected]>
--- ...pdate-linux-UAPI-headers-to-v7.0-rc3.patch | 1126 +++++++++++++++++ ...-update-linux-io_uring.h-to-v7.0-rc3.patch | 165 +++ ...e-linux-io_uring-query.h-to-v7.0-rc3.patch | 123 ++ 3 files changed, 1414 insertions(+) create mode 100644 package/strace/0001-bundled-update-linux-UAPI-headers-to-v7.0-rc3.patch create mode 100644 package/strace/0002-bundled-update-linux-io_uring.h-to-v7.0-rc3.patch create mode 100644 package/strace/0003-bundled-update-linux-io_uring-query.h-to-v7.0-rc3.patch
package/strace/0001-bundled-update-linux-UAPI-headers-to-v7.0-rc3.patch new file +1126 -0
@@ -0,0 +1,1126 @@ +From 33b950714a966bde816a1f1e75c127c3d3ae53cd Mon Sep 17 00:00:00 2001 +From: "Dmitry V. Levin" <[email protected]> +Date: Mon, 9 Mar 2026 08:00:00 +0000 +Subject: [PATCH] bundled: update linux UAPI headers to v7.0-rc3 + +The update of linux/io_uring.h is delayed because the change in +struct io_uring_zcrx_ifq_reg requires a synchronous update of +the header, the parser and the test. + +The update of linux/io_uring/query.h is delayed because the change in +struct io_uring_query_zcrx requires a synchronous update of the header, +the parser and the test. + +* bundled/linux/include/uapi/linux/typelimits.h: New file. +* bundled/Makefile.am (EXTRA_DIST): Add +linux/include/uapi/linux/typelimits.h. +* bundled/linux/include/uapi/linux/blkzoned.h: Update to +headers_install'ed Linux kernel v7.0-rc3. +* bundled/linux/include/uapi/linux/btrfs.h: Likewise. +* bundled/linux/include/uapi/linux/btrfs_tree.h: Likewise. +* bundled/linux/include/uapi/linux/ethtool.h: Likewise. +* bundled/linux/include/uapi/linux/fs.h: Likewise. +* bundled/linux/include/uapi/linux/if_alg.h: Likewise. +* bundled/linux/include/uapi/linux/if_link.h: Likewise. +* bundled/linux/include/uapi/linux/landlock.h: Likewise. +* bundled/linux/include/uapi/linux/mount.h: Likewise. +* bundled/linux/include/uapi/linux/mptcp_pm.h: Likewise. +* bundled/linux/include/uapi/linux/nl80211.h: Likewise. +* bundled/linux/include/uapi/linux/perf_event.h: Likewise. +* bundled/linux/include/uapi/linux/pkt_sched.h: Likewise. +* bundled/linux/include/uapi/linux/prctl.h: Likewise. +* bundled/linux/include/uapi/linux/taskstats.h: Likewise. +* bundled/linux/include/uapi/linux/tcp.h: Likewise. +* bundled/linux/include/uapi/linux/v4l2-controls.h: Likewise. +* bundled/linux/include/uapi/linux/version.h: Likewise. +* bundled/linux/include/uapi/linux/videodev2.h: Likewise. + +Upstream: https://github.com/strace/strace/commit/33b950714a966bde816a1f1e75c127c3d3ae53cd + +Signed-off-by: Bernd Kuhls <[email protected]> +--- + bundled/Makefile.am | 1 + + bundled/linux/include/uapi/linux/blkzoned.h | 6 +- + bundled/linux/include/uapi/linux/btrfs.h | 1 + + bundled/linux/include/uapi/linux/btrfs_tree.h | 34 +++++- + bundled/linux/include/uapi/linux/ethtool.h | 26 +++- + bundled/linux/include/uapi/linux/fs.h | 1 + + bundled/linux/include/uapi/linux/if_alg.h | 2 +- + bundled/linux/include/uapi/linux/if_link.h | 1 + + bundled/linux/include/uapi/linux/landlock.h | 67 ++++++----- + bundled/linux/include/uapi/linux/mount.h | 13 +- + bundled/linux/include/uapi/linux/mptcp_pm.h | 2 +- + bundled/linux/include/uapi/linux/nl80211.h | 112 +++++++++++++++++- + bundled/linux/include/uapi/linux/perf_event.h | 29 ++++- + bundled/linux/include/uapi/linux/pkt_sched.h | 1 + + bundled/linux/include/uapi/linux/prctl.h | 37 ++++++ + bundled/linux/include/uapi/linux/taskstats.h | 13 +- + bundled/linux/include/uapi/linux/tcp.h | 26 +++- + bundled/linux/include/uapi/linux/typelimits.h | 8 ++ + .../linux/include/uapi/linux/v4l2-controls.h | 63 ++++++++++ + bundled/linux/include/uapi/linux/version.h | 6 +- + bundled/linux/include/uapi/linux/videodev2.h | 3 + + 21 files changed, 395 insertions(+), 57 deletions(-) + create mode 100644 bundled/linux/include/uapi/linux/typelimits.h + +diff --git a/bundled/Makefile.am b/bundled/Makefile.am +index 9140ccbbe..f1644002f 100644 +--- a/bundled/Makefile.am ++++ b/bundled/Makefile.am +@@ -135,6 +135,7 @@ EXTRA_DIST = \ + linux/include/uapi/linux/thermal.h \ + linux/include/uapi/linux/tipc.h \ + linux/include/uapi/linux/tls.h \ ++ linux/include/uapi/linux/typelimits.h \ + linux/include/uapi/linux/types.h \ + linux/include/uapi/linux/unix_diag.h \ + linux/include/uapi/linux/userfaultfd.h \ +diff --git a/bundled/linux/include/uapi/linux/blkzoned.h b/bundled/linux/include/uapi/linux/blkzoned.h +index 44d5cbe5c..7ca3da613 100644 +--- a/bundled/linux/include/uapi/linux/blkzoned.h ++++ b/bundled/linux/include/uapi/linux/blkzoned.h +@@ -81,7 +81,8 @@ enum blk_zone_cond { + BLK_ZONE_COND_FULL = 0xE, + BLK_ZONE_COND_OFFLINE = 0xF, + +- BLK_ZONE_COND_ACTIVE = 0xFF, ++ BLK_ZONE_COND_ACTIVE = 0xFF, /* added in Linux 6.19 */ ++#define BLK_ZONE_COND_ACTIVE BLK_ZONE_COND_ACTIVE + }; + + /** +@@ -100,7 +101,8 @@ enum blk_zone_report_flags { + BLK_ZONE_REP_CAPACITY = (1U << 0), + + /* Input flags */ +- BLK_ZONE_REP_CACHED = (1U << 31), ++ BLK_ZONE_REP_CACHED = (1U << 31), /* added in Linux 6.19 */ ++#define BLK_ZONE_REP_CACHED BLK_ZONE_REP_CACHED + }; + + /** +diff --git a/bundled/linux/include/uapi/linux/btrfs.h b/bundled/linux/include/uapi/linux/btrfs.h +index df4b2f88f..2988d1b29 100644 +--- a/bundled/linux/include/uapi/linux/btrfs.h ++++ b/bundled/linux/include/uapi/linux/btrfs.h +@@ -334,6 +334,7 @@ struct btrfs_ioctl_fs_info_args { + #define BTRFS_FEATURE_INCOMPAT_EXTENT_TREE_V2 (1ULL << 13) + #define BTRFS_FEATURE_INCOMPAT_RAID_STRIPE_TREE (1ULL << 14) + #define BTRFS_FEATURE_INCOMPAT_SIMPLE_QUOTA (1ULL << 16) ++#define BTRFS_FEATURE_INCOMPAT_REMAP_TREE (1ULL << 17) + + struct btrfs_ioctl_feature_flags { + __u64 compat_flags; +diff --git a/bundled/linux/include/uapi/linux/btrfs_tree.h b/bundled/linux/include/uapi/linux/btrfs_tree.h +index 86242120a..0507f9309 100644 +--- a/bundled/linux/include/uapi/linux/btrfs_tree.h ++++ b/bundled/linux/include/uapi/linux/btrfs_tree.h +@@ -72,6 +72,9 @@ + /* Tracks RAID stripes in block groups. */ + #define BTRFS_RAID_STRIPE_TREE_OBJECTID 12ULL + ++/* Holds details of remapped addresses after relocation. */ ++#define BTRFS_REMAP_TREE_OBJECTID 13ULL ++ + /* device stats in the device tree */ + #define BTRFS_DEV_STATS_OBJECTID 0ULL + +@@ -278,6 +281,10 @@ + + #define BTRFS_RAID_STRIPE_KEY 230 + ++#define BTRFS_IDENTITY_REMAP_KEY 234 ++#define BTRFS_REMAP_KEY 235 ++#define BTRFS_REMAP_BACKREF_KEY 236 ++ + /* + * Records the overall state of the qgroups. + * There's only one instance of this key present, +@@ -710,9 +717,12 @@ struct btrfs_super_block { + __u8 metadata_uuid[BTRFS_FSID_SIZE]; + + __u64 nr_global_roots; ++ __le64 remap_root; ++ __le64 remap_root_generation; ++ __u8 remap_root_level; + + /* Future expansion */ +- __le64 reserved[27]; ++ __u8 reserved[199]; + __u8 sys_chunk_array[BTRFS_SYSTEM_CHUNK_ARRAY_SIZE]; + struct btrfs_root_backup super_roots[BTRFS_NUM_BACKUP_ROOTS]; + +@@ -1157,12 +1167,15 @@ struct btrfs_dev_replace_item { + #define BTRFS_BLOCK_GROUP_RAID6 (1ULL << 8) + #define BTRFS_BLOCK_GROUP_RAID1C3 (1ULL << 9) + #define BTRFS_BLOCK_GROUP_RAID1C4 (1ULL << 10) ++#define BTRFS_BLOCK_GROUP_REMAPPED (1ULL << 11) ++#define BTRFS_BLOCK_GROUP_METADATA_REMAP (1ULL << 12) + #define BTRFS_BLOCK_GROUP_RESERVED (BTRFS_AVAIL_ALLOC_BIT_SINGLE | \ + BTRFS_SPACE_INFO_GLOBAL_RSV) + + #define BTRFS_BLOCK_GROUP_TYPE_MASK (BTRFS_BLOCK_GROUP_DATA | \ + BTRFS_BLOCK_GROUP_SYSTEM | \ +- BTRFS_BLOCK_GROUP_METADATA) ++ BTRFS_BLOCK_GROUP_METADATA | \ ++ BTRFS_BLOCK_GROUP_METADATA_REMAP) + + #define BTRFS_BLOCK_GROUP_PROFILE_MASK (BTRFS_BLOCK_GROUP_RAID0 | \ + BTRFS_BLOCK_GROUP_RAID1 | \ +@@ -1215,6 +1228,14 @@ struct btrfs_block_group_item { + __le64 flags; + } __attribute__ ((__packed__)); + ++struct btrfs_block_group_item_v2 { ++ __le64 used; ++ __le64 chunk_objectid; ++ __le64 flags; ++ __le64 remap_bytes; ++ __le32 identity_remap_count; ++} __attribute__ ((__packed__)); ++ + struct btrfs_free_space_info { + __le32 extent_count; + __le32 flags; +@@ -1319,4 +1340,13 @@ struct btrfs_verity_descriptor_item { + __u8 encryption; + } __attribute__ ((__packed__)); + ++/* ++ * For a range identified by a BTRFS_REMAP_KEY item in the remap tree, gives ++ * the address that the start of the range will get remapped to. This ++ * structure is also shared by BTRFS_REMAP_BACKREF_KEY. ++ */ ++struct btrfs_remap_item { ++ __le64 address; ++} __attribute__ ((__packed__)); ++ + #endif /* _BTRFS_CTREE_H_ */ +diff --git a/bundled/linux/include/uapi/linux/ethtool.h b/bundled/linux/include/uapi/linux/ethtool.h +index 046eb223f..7a13192e7 100644 +--- a/bundled/linux/include/uapi/linux/ethtool.h ++++ b/bundled/linux/include/uapi/linux/ethtool.h +@@ -15,11 +15,10 @@ + #define _LINUX_ETHTOOL_H + + #include <linux/const.h> ++#include <linux/typelimits.h> + #include <linux/types.h> + #include <linux/if_ether.h> + +-#include <limits.h> /* for INT_MAX */ +- + /* All structures exposed to userland should be defined such that they + * have the same layout for 32-bit and 64-bit userland. + */ +@@ -601,6 +600,8 @@ enum ethtool_link_ext_state { + ETHTOOL_LINK_EXT_STATE_POWER_BUDGET_EXCEEDED, + ETHTOOL_LINK_EXT_STATE_OVERHEAT, + ETHTOOL_LINK_EXT_STATE_MODULE, ++ ETHTOOL_LINK_EXT_STATE_OTP_SPEED_VIOLATION, ++ ETHTOOL_LINK_EXT_STATE_BMC_REQUEST_DOWN, + }; + + /* More information in addition to ETHTOOL_LINK_EXT_STATE_AUTONEG. */ +@@ -1092,13 +1093,20 @@ enum ethtool_module_fw_flash_status { + * struct ethtool_gstrings - string set for data tagging + * @cmd: Command number = %ETHTOOL_GSTRINGS + * @string_set: String set ID; one of &enum ethtool_stringset +- * @len: On return, the number of strings in the string set ++ * @len: Number of strings in the string set + * @data: Buffer for strings. Each string is null-padded to a size of + * %ETH_GSTRING_LEN. + * + * Users must use %ETHTOOL_GSSET_INFO to find the number of strings in + * the string set. They must allocate a buffer of the appropriate + * size immediately following this structure. ++ * ++ * Setting @len on input is optional (though preferred), but must be zeroed ++ * otherwise. ++ * When set, @len will return the requested count if it matches the actual ++ * count; otherwise, it will be zero. ++ * This prevents issues when the number of strings is different than the ++ * userspace allocation. + */ + struct ethtool_gstrings { + __u32 cmd; +@@ -1175,13 +1183,20 @@ struct ethtool_test { + /** + * struct ethtool_stats - device-specific statistics + * @cmd: Command number = %ETHTOOL_GSTATS +- * @n_stats: On return, the number of statistics ++ * @n_stats: Number of statistics + * @data: Array of statistics + * + * Users must use %ETHTOOL_GSSET_INFO or %ETHTOOL_GDRVINFO to find the + * number of statistics that will be returned. They must allocate a + * buffer of the appropriate size (8 * number of statistics) + * immediately following this structure. ++ * ++ * Setting @n_stats on input is optional (though preferred), but must be zeroed ++ * otherwise. ++ * When set, @n_stats will return the requested count if it matches the actual ++ * count; otherwise, it will be zero. ++ * This prevents issues when the number of stats is different than the ++ * userspace allocation. + */ + struct ethtool_stats { + __u32 cmd; +@@ -2188,6 +2203,7 @@ enum ethtool_link_mode_bit_indices { + #define SPEED_40000 40000 + #define SPEED_50000 50000 + #define SPEED_56000 56000 ++#define SPEED_80000 80000 + #define SPEED_100000 100000 + #define SPEED_200000 200000 + #define SPEED_400000 400000 +@@ -2198,7 +2214,7 @@ enum ethtool_link_mode_bit_indices { + + static __inline__ int ethtool_validate_speed(__u32 speed) + { +- return speed <= INT_MAX || speed == (__u32)SPEED_UNKNOWN; ++ return speed <= __KERNEL_INT_MAX || speed == (__u32)SPEED_UNKNOWN; + } + + /* Duplex, half or full. */ +diff --git a/bundled/linux/include/uapi/linux/fs.h b/bundled/linux/include/uapi/linux/fs.h +index 59af514fe..1f54423d3 100644 +--- a/bundled/linux/include/uapi/linux/fs.h ++++ b/bundled/linux/include/uapi/linux/fs.h +@@ -249,6 +249,7 @@ struct file_attr { + #define FS_XFLAG_FILESTREAM 0x00004000 /* use filestream allocator */ + #define FS_XFLAG_DAX 0x00008000 /* use DAX for IO */ + #define FS_XFLAG_COWEXTSIZE 0x00010000 /* CoW extent size allocator hint */ ++#define FS_XFLAG_VERITY 0x00020000 /* fs-verity enabled */ + #define FS_XFLAG_HASATTR 0x80000000 /* no DIFLAG for this */ + + /* the read-only stuff doesn't really belong here, but any other place is +diff --git a/bundled/linux/include/uapi/linux/if_alg.h b/bundled/linux/include/uapi/linux/if_alg.h +index 0824fbc02..79fd8956c 100644 +--- a/bundled/linux/include/uapi/linux/if_alg.h ++++ b/bundled/linux/include/uapi/linux/if_alg.h +@@ -42,7 +42,7 @@ struct sockaddr_alg_new { + + struct af_alg_iv { + __u32 ivlen; +- __u8 iv[]; ++ __u8 iv[] __counted_by(ivlen); + }; + + /* Socket options */ +diff --git a/bundled/linux/include/uapi/linux/if_link.h b/bundled/linux/include/uapi/linux/if_link.h +index d05f5cc75..2037afbc4 100644 +--- a/bundled/linux/include/uapi/linux/if_link.h ++++ b/bundled/linux/include/uapi/linux/if_link.h +@@ -1441,6 +1441,7 @@ enum { + IFLA_GENEVE_DF, + IFLA_GENEVE_INNER_PROTO_INHERIT, + IFLA_GENEVE_PORT_RANGE, ++ IFLA_GENEVE_GRO_HINT, + __IFLA_GENEVE_MAX + }; + #define IFLA_GENEVE_MAX (__IFLA_GENEVE_MAX - 1) +diff --git a/bundled/linux/include/uapi/linux/landlock.h b/bundled/linux/include/uapi/linux/landlock.h +index fde9a3e7f..f729a3333 100644 +--- a/bundled/linux/include/uapi/linux/landlock.h ++++ b/bundled/linux/include/uapi/linux/landlock.h +@@ -117,11 +117,24 @@ struct landlock_ruleset_attr { + * future nested domains, not the one being created. It can also be used + * with a @ruleset_fd value of -1 to mute subdomain logs without creating a + * domain. ++ * ++ * The following flag supports policy enforcement in multithreaded processes: ++ * ++ * %LANDLOCK_RESTRICT_SELF_TSYNC ++ * Applies the new Landlock configuration atomically to all threads of the ++ * current process, including the Landlock domain and logging ++ * configuration. This overrides the Landlock configuration of sibling ++ * threads, irrespective of previously established Landlock domains and ++ * logging configurations on these threads. ++ * ++ * If the calling thread is running with no_new_privs, this operation ++ * enables no_new_privs on the sibling threads as well. + */ + /* clang-format off */ + #define LANDLOCK_RESTRICT_SELF_LOG_SAME_EXEC_OFF (1U << 0) + #define LANDLOCK_RESTRICT_SELF_LOG_NEW_EXEC_ON (1U << 1) + #define LANDLOCK_RESTRICT_SELF_LOG_SUBDOMAINS_OFF (1U << 2) ++#define LANDLOCK_RESTRICT_SELF_TSYNC (1U << 3) + /* clang-format on */ + + /** +@@ -182,11 +195,13 @@ struct landlock_net_port_attr { + * It should be noted that port 0 passed to :manpage:`bind(2)` will bind + * to an available port from the ephemeral port range. This can be + * configured with the ``/proc/sys/net/ipv4/ip_local_port_range`` sysctl +- * (also used for IPv6). ++ * (also used for IPv6), and within that range, on a per-socket basis ++ * with ``setsockopt(IP_LOCAL_PORT_RANGE)``. + * +- * A Landlock rule with port 0 and the ``LANDLOCK_ACCESS_NET_BIND_TCP`` ++ * A Landlock rule with port 0 and the %LANDLOCK_ACCESS_NET_BIND_TCP + * right means that requesting to bind on port 0 is allowed and it will +- * automatically translate to binding on the related port range. ++ * automatically translate to binding on a kernel-assigned ephemeral ++ * port. + */ + __u64 port; + }; +@@ -216,6 +231,23 @@ struct landlock_net_port_attr { + * :manpage:`ftruncate(2)`, :manpage:`creat(2)`, or :manpage:`open(2)` with + * ``O_TRUNC``. This access right is available since the third version of the + * Landlock ABI. ++ * - %LANDLOCK_ACCESS_FS_IOCTL_DEV: Invoke :manpage:`ioctl(2)` commands on an opened ++ * character or block device. ++ * ++ * This access right applies to all `ioctl(2)` commands implemented by device ++ * drivers. However, the following common IOCTL commands continue to be ++ * invokable independent of the %LANDLOCK_ACCESS_FS_IOCTL_DEV right: ++ * ++ * * IOCTL commands targeting file descriptors (``FIOCLEX``, ``FIONCLEX``), ++ * * IOCTL commands targeting file descriptions (``FIONBIO``, ``FIOASYNC``), ++ * * IOCTL commands targeting file systems (``FIFREEZE``, ``FITHAW``, ++ * ``FIGETBSZ``, ``FS_IOC_GETFSUUID``, ``FS_IOC_GETFSSYSFSPATH``) ++ * * Some IOCTL commands which do not make sense when used with devices, but ++ * whose implementations are safe and return the right error codes ++ * (``FS_IOC_FIEMAP``, ``FICLONE``, ``FICLONERANGE``, ``FIDEDUPERANGE``) ++ * ++ * This access right is available since the fifth version of the Landlock ++ * ABI. + * + * Whether an opened file can be truncated with :manpage:`ftruncate(2)` or used + * with `ioctl(2)` is determined during :manpage:`open(2)`, in the same way as +@@ -275,26 +307,6 @@ struct landlock_net_port_attr { + * If multiple requirements are not met, the ``EACCES`` error code takes + * precedence over ``EXDEV``. + * +- * The following access right applies both to files and directories: +- * +- * - %LANDLOCK_ACCESS_FS_IOCTL_DEV: Invoke :manpage:`ioctl(2)` commands on an opened +- * character or block device. +- * +- * This access right applies to all `ioctl(2)` commands implemented by device +- * drivers. However, the following common IOCTL commands continue to be +- * invokable independent of the %LANDLOCK_ACCESS_FS_IOCTL_DEV right: +- * +- * * IOCTL commands targeting file descriptors (``FIOCLEX``, ``FIONCLEX``), +- * * IOCTL commands targeting file descriptions (``FIONBIO``, ``FIOASYNC``), +- * * IOCTL commands targeting file systems (``FIFREEZE``, ``FITHAW``, +- * ``FIGETBSZ``, ``FS_IOC_GETFSUUID``, ``FS_IOC_GETFSSYSFSPATH``) +- * * Some IOCTL commands which do not make sense when used with devices, but +- * whose implementations are safe and return the right error codes +- * (``FS_IOC_FIEMAP``, ``FICLONE``, ``FICLONERANGE``, ``FIDEDUPERANGE``) +- * +- * This access right is available since the fifth version of the Landlock +- * ABI. +- * + * .. warning:: + * + * It is currently not possible to restrict some file-related actions +@@ -332,13 +344,12 @@ struct landlock_net_port_attr { + * These flags enable to restrict a sandboxed process to a set of network + * actions. + * +- * This is supported since Landlock ABI version 4. +- * + * The following access rights apply to TCP port numbers: + * +- * - %LANDLOCK_ACCESS_NET_BIND_TCP: Bind a TCP socket to a local port. +- * - %LANDLOCK_ACCESS_NET_CONNECT_TCP: Connect an active TCP socket to +- * a remote port. ++ * - %LANDLOCK_ACCESS_NET_BIND_TCP: Bind TCP sockets to the given local ++ * port. Support added in Landlock ABI version 4. ++ * - %LANDLOCK_ACCESS_NET_CONNECT_TCP: Connect TCP sockets to the given ++ * remote port. Support added in Landlock ABI version 4. + */ + /* clang-format off */ + #define LANDLOCK_ACCESS_NET_BIND_TCP (1ULL << 0) +diff --git a/bundled/linux/include/uapi/linux/mount.h b/bundled/linux/include/uapi/linux/mount.h +index 534dc2f1d..96f2d20e7 100644 +--- a/bundled/linux/include/uapi/linux/mount.h ++++ b/bundled/linux/include/uapi/linux/mount.h +@@ -61,7 +61,8 @@ + /* + * open_tree() flags. + */ +-#define OPEN_TREE_CLONE 1 /* Clone the target tree and attach the clone */ ++#define OPEN_TREE_CLONE (1 << 0) /* Clone the target tree and attach the clone */ ++#define OPEN_TREE_NAMESPACE (1 << 1) /* Clone the target tree into a new mount namespace */ + #define OPEN_TREE_CLOEXEC O_CLOEXEC /* Close the file on execve() */ + + /* +@@ -197,7 +198,10 @@ struct statmount { + */ + struct mnt_id_req { + __u32 size; +- __u32 mnt_ns_fd; ++ union { ++ __u32 mnt_ns_fd; ++ __u32 mnt_fd; ++ }; + __u64 mnt_id; + __u64 param; + __u64 mnt_ns_id; +@@ -232,4 +236,9 @@ struct mnt_id_req { + #define LSMT_ROOT 0xffffffffffffffff /* root mount */ + #define LISTMOUNT_REVERSE (1 << 0) /* List later mounts first */ + ++/* ++ * @flag bits for statmount(2) ++ */ ++#define STATMOUNT_BY_FD 0x00000001U /* want mountinfo for given fd */ ++ + #endif /* _LINUX_MOUNT_H */ +diff --git a/bundled/linux/include/uapi/linux/mptcp_pm.h b/bundled/linux/include/uapi/linux/mptcp_pm.h +index 593be618b..6e38dfc9f 100644 +--- a/bundled/linux/include/uapi/linux/mptcp_pm.h ++++ b/bundled/linux/include/uapi/linux/mptcp_pm.h +@@ -11,7 +11,7 @@ + #define MPTCP_PM_VER 1 + + /** +- * enum mptcp_event_type ++ * enum mptcp_event_type - Netlink MPTCP event types + * @MPTCP_EVENT_UNSPEC: unused event + * @MPTCP_EVENT_CREATED: A new MPTCP connection has been created. It is the + * good time to allocate memory and send ADD_ADDR if needed. Depending on the +diff --git a/bundled/linux/include/uapi/linux/nl80211.h b/bundled/linux/include/uapi/linux/nl80211.h +index 8134f10e4..b63f71850 100644 +--- a/bundled/linux/include/uapi/linux/nl80211.h ++++ b/bundled/linux/include/uapi/linux/nl80211.h +@@ -11,7 +11,7 @@ + * Copyright 2008 Jouni Malinen <[email protected]> + * Copyright 2008 Colin McCabe <[email protected]> + * Copyright 2015-2017 Intel Deutschland GmbH +- * Copyright (C) 2018-2025 Intel Corporation ++ * Copyright (C) 2018-2026 Intel Corporation + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above +@@ -2880,8 +2880,9 @@ enum nl80211_commands { + * index. If the userspace includes more RNR elements than number of + * MBSSID elements then these will be added in every EMA beacon. + * +- * @NL80211_ATTR_MLO_LINK_DISABLED: Flag attribute indicating that the link is +- * disabled. ++ * @NL80211_ATTR_MLO_LINK_DISABLED: Unused. It was used to indicate that a link ++ * is disabled during association. However, the AP will send the ++ * information by including a TTLM in the association response. + * + * @NL80211_ATTR_BSS_DUMP_INCLUDE_USE_DATA: Include BSS usage data, i.e. + * include BSSes that can only be used in restricted scenarios and/or +@@ -2973,6 +2974,16 @@ enum nl80211_commands { + * primary channel is 2 MHz wide, and the control channel designates + * the 1 MHz primary subchannel within that 2 MHz primary. + * ++ * @NL80211_ATTR_EPP_PEER: A flag attribute to indicate if the peer is an EPP ++ * STA. Used with %NL80211_CMD_NEW_STA and %NL80211_CMD_ADD_LINK_STA ++ * ++ * @NL80211_ATTR_UHR_CAPABILITY: UHR Capability information element (from ++ * association request when used with NL80211_CMD_NEW_STATION). Can be set ++ * only if HE/EHT are also available. ++ * @NL80211_ATTR_DISABLE_UHR: Force UHR capable interfaces to disable ++ * this feature during association. This is a flag attribute. ++ * Currently only supported in mac80211 drivers. ++ * + * @NUM_NL80211_ATTR: total number of nl80211_attrs available + * @NL80211_ATTR_MAX: highest attribute number currently defined + * @__NL80211_ATTR_AFTER_LAST: internal use +@@ -3541,6 +3552,11 @@ enum nl80211_attrs { + + NL80211_ATTR_S1G_PRIMARY_2MHZ, + ++ NL80211_ATTR_EPP_PEER, ++ ++ NL80211_ATTR_UHR_CAPABILITY, ++ NL80211_ATTR_DISABLE_UHR, ++ + /* add attributes here, update the policy in nl80211.c */ + + __NL80211_ATTR_AFTER_LAST, +@@ -3893,6 +3909,12 @@ enum nl80211_eht_ru_alloc { + * @NL80211_RATE_INFO_4_MHZ_WIDTH: 4 MHz S1G rate + * @NL80211_RATE_INFO_8_MHZ_WIDTH: 8 MHz S1G rate + * @NL80211_RATE_INFO_16_MHZ_WIDTH: 16 MHz S1G rate ++ * @NL80211_RATE_INFO_UHR_MCS: UHR MCS index (u8, 0-15, 17, 19, 20, 23) ++ * Note that the other EHT attributes (such as @NL80211_RATE_INFO_EHT_NSS) ++ * are used in conjunction with this where applicable ++ * @NL80211_RATE_INFO_UHR_ELR: UHR ELR flag, which restricts NSS to 1, ++ * MCS to 0 or 1, and GI to %NL80211_RATE_INFO_EHT_GI_1_6. ++ * @NL80211_RATE_INFO_UHR_IM: UHR Interference Mitigation flag + * @__NL80211_RATE_INFO_AFTER_LAST: internal use + */ + enum nl80211_rate_info { +@@ -3926,6 +3948,9 @@ enum nl80211_rate_info { + NL80211_RATE_INFO_4_MHZ_WIDTH, + NL80211_RATE_INFO_8_MHZ_WIDTH, + NL80211_RATE_INFO_16_MHZ_WIDTH, ++ NL80211_RATE_INFO_UHR_MCS, ++ NL80211_RATE_INFO_UHR_ELR, ++ NL80211_RATE_INFO_UHR_IM, + + /* keep last */ + __NL80211_RATE_INFO_AFTER_LAST, +@@ -4248,6 +4273,10 @@ enum nl80211_mpath_info { + * capabilities element + * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PPE: EHT PPE thresholds information as + * defined in EHT capabilities element ++ * @NL80211_BAND_IFTYPE_ATTR_UHR_CAP_MAC: UHR MAC capabilities as in UHR ++ * capabilities element ++ * @NL80211_BAND_IFTYPE_ATTR_UHR_CAP_PHY: UHR PHY capabilities as in UHR ++ * capabilities element + * @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use + * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band attribute currently defined + */ +@@ -4265,6 +4294,8 @@ enum nl80211_band_iftype_attr { + NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PHY, + NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MCS_SET, + NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PPE, ++ NL80211_BAND_IFTYPE_ATTR_UHR_CAP_MAC, ++ NL80211_BAND_IFTYPE_ATTR_UHR_CAP_PHY, + + /* keep last */ + __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST, +@@ -4444,6 +4475,11 @@ enum nl80211_wmm_rule { + * channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_NO_16MHZ: 16 MHz operation is not allowed on this + * channel in current regulatory domain. ++ * @NL80211_FREQUENCY_ATTR_S1G_NO_PRIMARY: Channel is not permitted for use ++ * as a primary channel. Does not prevent the channel from existing ++ * as a non-primary subchannel. Only applicable to S1G channels. ++ * @NL80211_FREQUENCY_ATTR_NO_UHR: UHR operation is not allowed on this channel ++ * in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number + * currently defined + * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use +@@ -4492,6 +4528,8 @@ enum nl80211_frequency_attr { + NL80211_FREQUENCY_ATTR_NO_4MHZ, + NL80211_FREQUENCY_ATTR_NO_8MHZ, + NL80211_FREQUENCY_ATTR_NO_16MHZ, ++ NL80211_FREQUENCY_ATTR_S1G_NO_PRIMARY, ++ NL80211_FREQUENCY_ATTR_NO_UHR, + + /* keep last */ + __NL80211_FREQUENCY_ATTR_AFTER_LAST, +@@ -4705,6 +4743,7 @@ enum nl80211_sched_scan_match_attr { + * despite NO_IR configuration. + * @NL80211_RRF_ALLOW_20MHZ_ACTIVITY: Allow activity in 20 MHz bandwidth, + * despite NO_IR configuration. ++ * @NL80211_RRF_NO_UHR: UHR operation not allowed + */ + enum nl80211_reg_rule_flags { + NL80211_RRF_NO_OFDM = 1 << 0, +@@ -4731,6 +4770,7 @@ enum nl80211_reg_rule_flags { + NL80211_RRF_NO_6GHZ_AFC_CLIENT = 1 << 23, + NL80211_RRF_ALLOW_6GHZ_VLP_AP = 1 << 24, + NL80211_RRF_ALLOW_20MHZ_ACTIVITY = 1 << 25, ++ NL80211_RRF_NO_UHR = 1 << 26, + }; + + #define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR +@@ -5425,6 +5465,7 @@ enum nl80211_bss_status { + * @NL80211_AUTHTYPE_FILS_SK: Fast Initial Link Setup shared key + * @NL80211_AUTHTYPE_FILS_SK_PFS: Fast Initial Link Setup shared key with PFS + * @NL80211_AUTHTYPE_FILS_PK: Fast Initial Link Setup public key ++ * @NL80211_AUTHTYPE_EPPKE: Enhanced Privacy Protection Key Exchange + * @__NL80211_AUTHTYPE_NUM: internal + * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm + * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by +@@ -5440,6 +5481,7 @@ enum nl80211_auth_type { + NL80211_AUTHTYPE_FILS_SK, + NL80211_AUTHTYPE_FILS_SK_PFS, + NL80211_AUTHTYPE_FILS_PK, ++ NL80211_AUTHTYPE_EPPKE, + + /* keep last */ + __NL80211_AUTHTYPE_NUM, +@@ -6744,6 +6786,15 @@ enum nl80211_feature_flags { + * @NL80211_EXT_FEATURE_BEACON_RATE_EHT: Driver supports beacon rate + * configuration (AP/mesh) with EHT rates. + * ++ * @NL80211_EXT_FEATURE_EPPKE: Driver supports Enhanced Privacy Protection ++ * Key Exchange (EPPKE) with user space SME (NL80211_CMD_AUTHENTICATE) ++ * in non-AP STA mode. ++ * ++ * @NL80211_EXT_FEATURE_ASSOC_FRAME_ENCRYPTION: This specifies that the ++ * driver supports encryption of (Re)Association Request and Response ++ * frames in both non‑AP STA and AP mode as specified in ++ * "IEEE P802.11bi/D3.0, 12.16.6". ++ * + * @NUM_NL80211_EXT_FEATURES: number of extended features. + * @MAX_NL80211_EXT_FEATURES: highest extended feature index. + */ +@@ -6820,6 +6871,8 @@ enum nl80211_ext_feature_index { + NL80211_EXT_FEATURE_DFS_CONCURRENT, + NL80211_EXT_FEATURE_SPP_AMSDU_SUPPORT, + NL80211_EXT_FEATURE_BEACON_RATE_EHT, ++ NL80211_EXT_FEATURE_EPPKE, ++ NL80211_EXT_FEATURE_ASSOC_FRAME_ENCRYPTION, + + /* add new features before the definition below */ + NUM_NL80211_EXT_FEATURES, +@@ -7432,6 +7485,8 @@ enum nl80211_nan_band_conf_attributes { + * address that can take values from 50-6F-9A-01-00-00 to + * 50-6F-9A-01-FF-FF. This attribute is optional. If not present, + * a random Cluster ID will be chosen. ++ * This attribute will be ignored in NL80211_CMD_CHANGE_NAN_CONFIG ++ * since after NAN was started, the cluster ID can no longer change. + * @NL80211_NAN_CONF_EXTRA_ATTRS: Additional NAN attributes to be + * published in the beacons. This is an optional byte array. + * @NL80211_NAN_CONF_VENDOR_ELEMS: Vendor-specific elements that will +@@ -7766,6 +7821,30 @@ enum nl80211_peer_measurement_attrs { + * trigger based ranging measurement is supported + * @NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED: flag attribute indicating + * if non-trigger-based ranging measurement is supported ++ * @NL80211_PMSR_FTM_CAPA_ATTR_6GHZ_SUPPORT: flag attribute indicating if ++ * ranging on the 6 GHz band is supported ++ * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_TX_LTF_REP: u32 attribute indicating ++ * the maximum number of LTF repetitions the device can transmit in the ++ * preamble of the ranging NDP (zero means only one LTF, no repetitions) ++ * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_RX_LTF_REP: u32 attribute indicating ++ * the maximum number of LTF repetitions the device can receive in the ++ * preamble of the ranging NDP (zero means only one LTF, no repetitions) ++ * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_TX_STS: u32 attribute indicating ++ * the maximum number of space-time streams supported for ranging NDP TX ++ * (zero-based) ++ * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_RX_STS: u32 attribute indicating ++ * the maximum number of space-time streams supported for ranging NDP RX ++ * (zero-based) ++ * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_TOTAL_LTF_TX: u32 attribute indicating the ++ * maximum total number of LTFs the device can transmit. The total number ++ * of LTFs is (number of LTF repetitions) * (number of space-time streams). ++ * This limits the allowed combinations of LTF repetitions and STS. ++ * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_TOTAL_LTF_RX: u32 attribute indicating the ++ * maximum total number of LTFs the device can receive. The total number ++ * of LTFs is (number of LTF repetitions) * (number of space-time streams). ++ * This limits the allowed combinations of LTF repetitions and STS. ++ * @NL80211_PMSR_FTM_CAPA_ATTR_RSTA_SUPPORT: flag attribute indicating the ++ * device supports operating as the RSTA in PMSR FTM request + * + * @NUM_NL80211_PMSR_FTM_CAPA_ATTR: internal + * @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number +@@ -7783,6 +7862,14 @@ enum nl80211_peer_measurement_ftm_capa { + NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST, + NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED, + NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED, ++ NL80211_PMSR_FTM_CAPA_ATTR_6GHZ_SUPPORT, ++ NL80211_PMSR_FTM_CAPA_ATTR_MAX_TX_LTF_REP, ++ NL80211_PMSR_FTM_CAPA_ATTR_MAX_RX_LTF_REP, ++ NL80211_PMSR_FTM_CAPA_ATTR_MAX_TX_STS, ++ NL80211_PMSR_FTM_CAPA_ATTR_MAX_RX_STS, ++ NL80211_PMSR_FTM_CAPA_ATTR_MAX_TOTAL_LTF_TX, ++ NL80211_PMSR_FTM_CAPA_ATTR_MAX_TOTAL_LTF_RX, ++ NL80211_PMSR_FTM_CAPA_ATTR_RSTA_SUPPORT, + + /* keep last */ + NUM_NL80211_PMSR_FTM_CAPA_ATTR, +@@ -7798,12 +7885,15 @@ enum nl80211_peer_measurement_ftm_capa { + * &enum nl80211_preamble), optional for DMG (u32) + * @NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP: number of bursts exponent as in + * 802.11-2016 9.4.2.168 "Fine Timing Measurement Parameters element" +- * (u8, 0-15, optional with default 15 i.e. "no preference") ++ * (u8, 0-15, optional with default 15 i.e. "no preference". No limit for ++ * non-EDCA ranging) + * @NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD: interval between bursts in units + * of 100ms (u16, optional with default 0) + * @NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION: burst duration, as in 802.11-2016 + * Table 9-257 "Burst Duration field encoding" (u8, 0-15, optional with +- * default 15 i.e. "no preference") ++ * default 15 i.e. "no preference"). For non-EDCA ranging, this is the ++ * burst duration in milliseconds (optional with default 0, i.e. let the ++ * device decide). + * @NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST: number of successful FTM frames + * requested per burst + * (u8, 0-31, optional with default 0 i.e. "no preference") +@@ -7832,6 +7922,14 @@ enum nl80211_peer_measurement_ftm_capa { + * @NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR: optional. The BSS color of the + * responder. Only valid if %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED + * or %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED is set. ++ * @NL80211_PMSR_FTM_REQ_ATTR_RSTA: optional. Request to perform the measurement ++ * as the RSTA (flag). When set, the device is expected to dwell on the ++ * channel specified in %NL80211_PMSR_PEER_ATTR_CHAN until it receives the ++ * FTM request from the peer or the timeout specified by ++ * %NL80211_ATTR_TIMEOUT has expired. ++ * Only valid if %NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK is set (so the ++ * RSTA will have the measurement results to report back in the FTM ++ * response). + * + * @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal + * @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number +@@ -7852,6 +7950,7 @@ enum nl80211_peer_measurement_ftm_req { + NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED, + NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK, + NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR, ++ NL80211_PMSR_FTM_REQ_ATTR_RSTA, + + /* keep last */ + NUM_NL80211_PMSR_FTM_REQ_ATTR, +@@ -7936,6 +8035,8 @@ enum nl80211_peer_measurement_ftm_failure_reasons { + * 9.4.2.22.1) starting with the Measurement Token, with Measurement + * Type 11. + * @NL80211_PMSR_FTM_RESP_ATTR_PAD: ignore, for u64/s64 padding only ++ * @NL80211_PMSR_FTM_RESP_ATTR_BURST_PERIOD: actual burst period used by ++ * the responder (similar to request, u16) + * + * @NUM_NL80211_PMSR_FTM_RESP_ATTR: internal + * @NL80211_PMSR_FTM_RESP_ATTR_MAX: highest attribute number +@@ -7964,6 +8065,7 @@ enum nl80211_peer_measurement_ftm_resp { + NL80211_PMSR_FTM_RESP_ATTR_LCI, + NL80211_PMSR_FTM_RESP_ATTR_CIVICLOC, + NL80211_PMSR_FTM_RESP_ATTR_PAD, ++ NL80211_PMSR_FTM_RESP_ATTR_BURST_PERIOD, + + /* keep last */ + NUM_NL80211_PMSR_FTM_RESP_ATTR, +diff --git a/bundled/linux/include/uapi/linux/perf_event.h b/bundled/linux/include/uapi/linux/perf_event.h +index 210138d0f..b70e4b731 100644 +--- a/bundled/linux/include/uapi/linux/perf_event.h ++++ b/bundled/linux/include/uapi/linux/perf_event.h +@@ -2,7 +2,7 @@ + /* + * Performance events: + * +- * Copyright (C) 2008-2009, Thomas Gleixner <[email protected]> ++ * Copyright (C) 2008-2009, Linutronix GmbH, Thomas Gleixner <[email protected]> + * Copyright (C) 2008-2011, Red Hat, Inc., Ingo Molnar + * Copyright (C) 2008-2011, Red Hat, Inc., Peter Zijlstra + * +@@ -1330,14 +1330,16 @@ union perf_mem_data_src { + mem_snoopx : 2, /* Snoop mode, ext */ + mem_blk : 3, /* Access blocked */ + mem_hops : 3, /* Hop level */ +- mem_rsvd : 18; ++ mem_region : 5, /* cache/memory regions */ ++ mem_rsvd : 13; + }; + }; + #elif defined(__BIG_ENDIAN_BITFIELD) + union perf_mem_data_src { + __u64 val; + struct { +- __u64 mem_rsvd : 18, ++ __u64 mem_rsvd : 13, ++ mem_region : 5, /* cache/memory regions */ + mem_hops : 3, /* Hop level */ + mem_blk : 3, /* Access blocked */ + mem_snoopx : 2, /* Snoop mode, ext */ +@@ -1394,7 +1396,7 @@ union perf_mem_data_src { + #define PERF_MEM_LVLNUM_L4 0x0004 /* L4 */ + #define PERF_MEM_LVLNUM_L2_MHB 0x0005 /* L2 Miss Handling Buffer */ + #define PERF_MEM_LVLNUM_MSC 0x0006 /* Memory-side Cache */ +-/* 0x007 available */ ++#define PERF_MEM_LVLNUM_L0 0x0007 /* L0 */ + #define PERF_MEM_LVLNUM_UNC 0x0008 /* Uncached */ + #define PERF_MEM_LVLNUM_CXL 0x0009 /* CXL */ + #define PERF_MEM_LVLNUM_IO 0x000a /* I/O */ +@@ -1447,6 +1449,25 @@ union perf_mem_data_src { + /* 5-7 available */ + #define PERF_MEM_HOPS_SHIFT 43 + ++/* Cache/Memory region */ ++#define PERF_MEM_REGION_NA 0x0 /* Invalid */ ++#define PERF_MEM_REGION_RSVD 0x01 /* Reserved */ ++#define PERF_MEM_REGION_L_SHARE 0x02 /* Local CA shared cache */ ++#define PERF_MEM_REGION_L_NON_SHARE 0x03 /* Local CA non-shared cache */ ++#define PERF_MEM_REGION_O_IO 0x04 /* Other CA IO agent */ ++#define PERF_MEM_REGION_O_SHARE 0x05 /* Other CA shared cache */ ++#define PERF_MEM_REGION_O_NON_SHARE 0x06 /* Other CA non-shared cache */ ++#define PERF_MEM_REGION_MMIO 0x07 /* MMIO */ ++#define PERF_MEM_REGION_MEM0 0x08 /* Memory region 0 */ ++#define PERF_MEM_REGION_MEM1 0x09 /* Memory region 1 */ ++#define PERF_MEM_REGION_MEM2 0x0a /* Memory region 2 */ ++#define PERF_MEM_REGION_MEM3 0x0b /* Memory region 3 */ ++#define PERF_MEM_REGION_MEM4 0x0c /* Memory region 4 */ ++#define PERF_MEM_REGION_MEM5 0x0d /* Memory region 5 */ ++#define PERF_MEM_REGION_MEM6 0x0e /* Memory region 6 */ ++#define PERF_MEM_REGION_MEM7 0x0f /* Memory region 7 */ ++#define PERF_MEM_REGION_SHIFT 46 ++ + #define PERF_MEM_S(a, s) \ + (((__u64)PERF_MEM_##a##_##s) << PERF_MEM_##a##_SHIFT) + +diff --git a/bundled/linux/include/uapi/linux/pkt_sched.h b/bundled/linux/include/uapi/linux/pkt_sched.h +index bf05b13d6..dc40688e2 100644 +--- a/bundled/linux/include/uapi/linux/pkt_sched.h ++++ b/bundled/linux/include/uapi/linux/pkt_sched.h +@@ -1036,6 +1036,7 @@ enum { + TCA_CAKE_STATS_DROP_NEXT_US, + TCA_CAKE_STATS_P_DROP, + TCA_CAKE_STATS_BLUE_TIMER_US, ++ TCA_CAKE_STATS_ACTIVE_QUEUES, + __TCA_CAKE_STATS_MAX + }; + #define TCA_CAKE_STATS_MAX (__TCA_CAKE_STATS_MAX - 1) +diff --git a/bundled/linux/include/uapi/linux/prctl.h b/bundled/linux/include/uapi/linux/prctl.h +index 51c4e8c82..55b0446ff 100644 +--- a/bundled/linux/include/uapi/linux/prctl.h ++++ b/bundled/linux/include/uapi/linux/prctl.h +@@ -386,4 +386,41 @@ struct prctl_mm_map { + # define PR_FUTEX_HASH_SET_SLOTS 1 + # define PR_FUTEX_HASH_GET_SLOTS 2 + ++/* RSEQ time slice extensions */ ++#define PR_RSEQ_SLICE_EXTENSION 79 ++# define PR_RSEQ_SLICE_EXTENSION_GET 1 ++# define PR_RSEQ_SLICE_EXTENSION_SET 2 ++/* ++ * Bits for RSEQ_SLICE_EXTENSION_GET/SET ++ * PR_RSEQ_SLICE_EXT_ENABLE: Enable ++ */ ++# define PR_RSEQ_SLICE_EXT_ENABLE 0x01 ++ ++/* ++ * Get the current indirect branch tracking configuration for the current ++ * thread, this will be the value configured via PR_SET_INDIR_BR_LP_STATUS. ++ */ ++#define PR_GET_INDIR_BR_LP_STATUS 80 ++ ++/* ++ * Set the indirect branch tracking configuration. PR_INDIR_BR_LP_ENABLE will ++ * enable cpu feature for user thread, to track all indirect branches and ensure ++ * they land on arch defined landing pad instruction. ++ * x86 - If enabled, an indirect branch must land on an ENDBRANCH instruction. ++ * arch64 - If enabled, an indirect branch must land on a BTI instruction. ++ * riscv - If enabled, an indirect branch must land on an lpad instruction. ++ * PR_INDIR_BR_LP_DISABLE will disable feature for user thread and indirect ++ * branches will no more be tracked by cpu to land on arch defined landing pad ++ * instruction. ++ */ ++#define PR_SET_INDIR_BR_LP_STATUS 81 ++# define PR_INDIR_BR_LP_ENABLE (1UL << 0) ++ ++/* ++ * Prevent further changes to the specified indirect branch tracking ++ * configuration. All bits may be locked via this call, including ++ * undefined bits. ++ */ ++#define PR_LOCK_INDIR_BR_LP_STATUS 82 ++ + #endif /* _LINUX_PRCTL_H */ +diff --git a/bundled/linux/include/uapi/linux/taskstats.h b/bundled/linux/include/uapi/linux/taskstats.h +index 5929030d4..3ae25f3ce 100644 +--- a/bundled/linux/include/uapi/linux/taskstats.h ++++ b/bundled/linux/include/uapi/linux/taskstats.h +@@ -18,6 +18,7 @@ + #define _LINUX_TASKSTATS_H + + #include <linux/types.h> ++#include <linux/time_types.h> + + /* Format for per-task data returned to userland when + * - a task exits +@@ -34,7 +35,7 @@ + */ + + +-#define TASKSTATS_VERSION 16 ++#define TASKSTATS_VERSION 17 + #define TS_COMM_LEN 32 /* should be >= TASK_COMM_LEN + * in linux/sched.h */ + +@@ -230,6 +231,16 @@ struct taskstats { + + __u64 irq_delay_max; + __u64 irq_delay_min; ++ ++ /*v17: delay max timestamp record*/ ++ struct __kernel_timespec cpu_delay_max_ts; ++ struct __kernel_timespec blkio_delay_max_ts; ++ struct __kernel_timespec swapin_delay_max_ts; ++ struct __kernel_timespec freepages_delay_max_ts; ++ struct __kernel_timespec thrashing_delay_max_ts; ++ struct __kernel_timespec compact_delay_max_ts; ++ struct __kernel_timespec wpcopy_delay_max_ts; ++ struct __kernel_timespec irq_delay_max_ts; + }; + + +diff --git a/bundled/linux/include/uapi/linux/tcp.h b/bundled/linux/include/uapi/linux/tcp.h +index e35d416b4..bac6e83f9 100644 +--- a/bundled/linux/include/uapi/linux/tcp.h ++++ b/bundled/linux/include/uapi/linux/tcp.h +@@ -226,6 +226,24 @@ enum tcp_ca_state { + #define TCPF_CA_Loss (1<<TCP_CA_Loss) + }; + ++/* Values for tcpi_ecn_mode after negotiation */ ++#define TCPI_ECN_MODE_DISABLED 0x0 ++#define TCPI_ECN_MODE_RFC3168 0x1 ++#define TCPI_ECN_MODE_ACCECN 0x2 ++#define TCPI_ECN_MODE_PENDING 0x3 ++ ++/* Values for accecn_opt_seen */ ++#define TCP_ACCECN_OPT_NOT_SEEN 0x0 ++#define TCP_ACCECN_OPT_EMPTY_SEEN 0x1 ++#define TCP_ACCECN_OPT_COUNTER_SEEN 0x2 ++#define TCP_ACCECN_OPT_FAIL_SEEN 0x3 ++ ++/* Values for accecn_fail_mode */ ++#define TCP_ACCECN_ACE_FAIL_SEND BIT(0) ++#define TCP_ACCECN_ACE_FAIL_RECV BIT(1) ++#define TCP_ACCECN_OPT_FAIL_SEND BIT(2) ++#define TCP_ACCECN_OPT_FAIL_RECV BIT(3) ++ + struct tcp_info { + __u8 tcpi_state; + __u8 tcpi_ca_state; +@@ -316,15 +334,17 @@ struct tcp_info { + * in milliseconds, including any + * unfinished recovery. + */ +- __u32 tcpi_received_ce; /* # of CE marks received */ ++ __u32 tcpi_received_ce; /* # of CE marked segments received */ + __u32 tcpi_delivered_e1_bytes; /* Accurate ECN byte counters */ + __u32 tcpi_delivered_e0_bytes; + __u32 tcpi_delivered_ce_bytes; + __u32 tcpi_received_e1_bytes; + __u32 tcpi_received_e0_bytes; + __u32 tcpi_received_ce_bytes; +- __u16 tcpi_accecn_fail_mode; +- __u16 tcpi_accecn_opt_seen; ++ __u32 tcpi_ecn_mode:2, ++ tcpi_accecn_opt_seen:2, ++ tcpi_accecn_fail_mode:4, ++ tcpi_options2:24; + }; + + /* netlink attributes types for SCM_TIMESTAMPING_OPT_STATS */ +diff --git a/bundled/linux/include/uapi/linux/typelimits.h b/bundled/linux/include/uapi/linux/typelimits.h +new file mode 100644 +index 000000000..8166c639b +--- /dev/null ++++ b/bundled/linux/include/uapi/linux/typelimits.h +@@ -0,0 +1,8 @@ ++/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ ++#ifndef _UAPI_LINUX_TYPELIMITS_H ++#define _UAPI_LINUX_TYPELIMITS_H ++ ++#define __KERNEL_INT_MAX ((int)(~0U >> 1)) ++#define __KERNEL_INT_MIN (-__KERNEL_INT_MAX - 1) ++ ++#endif /* _UAPI_LINUX_TYPELIMITS_H */ +diff --git a/bundled/linux/include/uapi/linux/v4l2-controls.h b/bundled/linux/include/uapi/linux/v4l2-controls.h +index 26c9e3255..52d87b330 100644 +--- a/bundled/linux/include/uapi/linux/v4l2-controls.h ++++ b/bundled/linux/include/uapi/linux/v4l2-controls.h +@@ -1188,6 +1188,8 @@ enum v4l2_flash_strobe_source { + + #define V4L2_CID_FLASH_CHARGE (V4L2_CID_FLASH_CLASS_BASE + 11) + #define V4L2_CID_FLASH_READY (V4L2_CID_FLASH_CLASS_BASE + 12) ++#define V4L2_CID_FLASH_DURATION (V4L2_CID_FLASH_CLASS_BASE + 13) ++#define V4L2_CID_FLASH_STROBE_OE (V4L2_CID_FLASH_CLASS_BASE + 14) + + + /* JPEG-class control IDs */ +@@ -2095,6 +2097,8 @@ struct v4l2_ctrl_mpeg2_quantisation { + #define V4L2_CID_STATELESS_HEVC_DECODE_MODE (V4L2_CID_CODEC_STATELESS_BASE + 405) + #define V4L2_CID_STATELESS_HEVC_START_CODE (V4L2_CID_CODEC_STATELESS_BASE + 406) + #define V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSETS (V4L2_CID_CODEC_STATELESS_BASE + 407) ++#define V4L2_CID_STATELESS_HEVC_EXT_SPS_ST_RPS (V4L2_CID_CODEC_STATELESS_BASE + 408) ++#define V4L2_CID_STATELESS_HEVC_EXT_SPS_LT_RPS (V4L2_CID_CODEC_STATELESS_BASE + 409) + + enum v4l2_stateless_hevc_decode_mode { + V4L2_STATELESS_HEVC_DECODE_MODE_SLICE_BASED, +@@ -2550,6 +2554,65 @@ struct v4l2_ctrl_hevc_scaling_matrix { + __u8 scaling_list_dc_coef_32x32[2]; + }; + ++#define V4L2_HEVC_EXT_SPS_ST_RPS_FLAG_INTER_REF_PIC_SET_PRED 0x1 ++ ++/* ++ * struct v4l2_ctrl_hevc_ext_sps_st_rps - HEVC short term RPS parameters ++ * ++ * Dynamic size 1-dimension array for short term RPS. The number of elements ++ * is v4l2_ctrl_hevc_sps::num_short_term_ref_pic_sets. It can contain up to 65 elements. ++ * ++ * @delta_idx_minus1: Specifies the delta compare to the index. See details in section 7.4.8 ++ * "Short-term reference picture set semantics" of the specification. ++ * @delta_rps_sign: Sign of the delta as specified in section 7.4.8 "Short-term reference picture ++ * set semantics" of the specification. ++ * @abs_delta_rps_minus1: Absolute delta RPS as specified in section 7.4.8 "Short-term reference ++ * picture set semantics" of the specification. ++ * @num_negative_pics: Number of short-term RPS entries that have picture order count values less ++ * than the picture order count value of the current picture. ++ * @num_positive_pics: Number of short-term RPS entries that have picture order count values ++ * greater than the picture order count value of the current picture. ++ * @used_by_curr_pic: Bit j specifies if short-term RPS j is used by the current picture. ++ * @use_delta_flag: Bit j equals to 1 specifies that the j-th entry in the source candidate ++ * short-term RPS is included in this candidate short-term RPS. ++ * @delta_poc_s0_minus1: Specifies the negative picture order count delta for the i-th entry in ++ * the short-term RPS. See details in section 7.4.8 "Short-term reference ++ * picture set semantics" of the specification. ++ * @delta_poc_s1_minus1: Specifies the positive picture order count delta for the i-th entry in ++ * the short-term RPS. See details in section 7.4.8 "Short-term reference ++ * picture set semantics" of the specification. ++ * @flags: See V4L2_HEVC_EXT_SPS_ST_RPS_FLAG_{} ++ */ ++struct v4l2_ctrl_hevc_ext_sps_st_rps { ++ __u8 delta_idx_minus1; ++ __u8 delta_rps_sign; ++ __u8 num_negative_pics; ++ __u8 num_positive_pics; ++ __u32 used_by_curr_pic; ++ __u32 use_delta_flag; ++ __u16 abs_delta_rps_minus1; ++ __u16 delta_poc_s0_minus1[16]; ++ __u16 delta_poc_s1_minus1[16]; ++ __u16 flags; ++}; ++ ++#define V4L2_HEVC_EXT_SPS_LT_RPS_FLAG_USED_LT 0x1 ++ ++/* ++ * struct v4l2_ctrl_hevc_ext_sps_lt_rps - HEVC long term RPS parameters ++ * ++ * Dynamic size 1-dimension array for long term RPS. The number of elements ++ * is v4l2_ctrl_hevc_sps::num_long_term_ref_pics_sps. It can contain up to 65 elements. ++ * ++ * @lt_ref_pic_poc_lsb_sps: picture order count modulo MaxPicOrderCntLsb of the i-th candidate ++ * long-term reference picture. ++ * @flags: See V4L2_HEVC_EXT_SPS_LT_RPS_FLAG_{} ++ */ ++struct v4l2_ctrl_hevc_ext_sps_lt_rps { ++ __u16 lt_ref_pic_poc_lsb_sps; ++ __u16 flags; ++}; ++ + /* Stateless VP9 controls */ + + #define V4L2_VP9_LOOP_FILTER_FLAG_DELTA_ENABLED 0x1 +diff --git a/bundled/linux/include/uapi/linux/version.h b/bundled/linux/include/uapi/linux/version.h +index 28ccfa734..42c0b30f5 100644 +--- a/bundled/linux/include/uapi/linux/version.h ++++ b/bundled/linux/include/uapi/linux/version.h +@@ -1,5 +1,5 @@ +-#define LINUX_VERSION_CODE 398080 ++#define LINUX_VERSION_CODE 458752 + #define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + ((c) > 255 ? 255 : (c))) +-#define LINUX_VERSION_MAJOR 6 +-#define LINUX_VERSION_PATCHLEVEL 19 ++#define LINUX_VERSION_MAJOR 7 ++#define LINUX_VERSION_PATCHLEVEL 0 + #define LINUX_VERSION_SUBLEVEL 0 +diff --git a/bundled/linux/include/uapi/linux/videodev2.h b/bundled/linux/include/uapi/linux/videodev2.h +index 0708d6683..feb326686 100644 +--- a/bundled/linux/include/uapi/linux/videodev2.h ++++ b/bundled/linux/include/uapi/linux/videodev2.h +@@ -748,6 +748,7 @@ struct v4l2_pix_format { + #define V4L2_PIX_FMT_H264_SLICE v4l2_fourcc('S', '2', '6', '4') /* H264 parsed slices */ + #define V4L2_PIX_FMT_HEVC_SLICE v4l2_fourcc('S', '2', '6', '5') /* HEVC parsed slices */ + #define V4L2_PIX_FMT_AV1_FRAME v4l2_fourcc('A', 'V', '1', 'F') /* AV1 parsed frame */ ++#define V4L2_PIX_FMT_AV1 v4l2_fourcc('A', 'V', '0', '1') /* AV1 */ + #define V4L2_PIX_FMT_SPK v4l2_fourcc('S', 'P', 'K', '0') /* Sorenson Spark */ + #define V4L2_PIX_FMT_RV30 v4l2_fourcc('R', 'V', '3', '0') /* RealVideo 8 */ + #define V4L2_PIX_FMT_RV40 v4l2_fourcc('R', 'V', '4', '0') /* RealVideo 9 & 10 */ +@@ -1916,6 +1917,8 @@ enum v4l2_ctrl_type { + V4L2_CTRL_TYPE_HEVC_SLICE_PARAMS = 0x0272, + V4L2_CTRL_TYPE_HEVC_SCALING_MATRIX = 0x0273, + V4L2_CTRL_TYPE_HEVC_DECODE_PARAMS = 0x0274, ++ V4L2_CTRL_TYPE_HEVC_EXT_SPS_ST_RPS = 0x0275, ++ V4L2_CTRL_TYPE_HEVC_EXT_SPS_LT_RPS = 0x0276, + + V4L2_CTRL_TYPE_AV1_SEQUENCE = 0x280, + V4L2_CTRL_TYPE_AV1_TILE_GROUP_ENTRY = 0x281, +-- +2.47.3 +
package/strace/0002-bundled-update-linux-io_uring.h-to-v7.0-rc3.patch new file +165 -0
165 lines not on this page · raw message
package/strace/0003-bundled-update-linux-io_uring-query.h-to-v7.0-rc3.patch new file +123 -0
123 lines not on this page · raw message
Signature · 6 lines
2.47.3 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH 3/4 {toolchain, linux-headers}: add support for 7.0 headers
In reply to Bernd KuhlsSigned-off-by Bernd Kuhls <[email protected]>
--- linux/from-6.17/linux.hash | 3 +++ package/linux-headers/7.0 | 1 + package/linux-headers/Config.in.host | 13 +++++++++++-- toolchain/Config.in | 5 +++++ .../toolchain-external-custom/Config.in.options | 6 +++++- 5 files changed, 25 insertions(+), 3 deletions(-) create mode 120000 package/linux-headers/7.0
linux/from-6.17/linux.hash +3 -0
@@ -1,3 +1,6 @@ +# From https://www.kernel.org/pub/linux/kernel/v7.x/sha256sums.asc +sha256 bb7f6d80b387c757b7d14bb93028fcb90f793c5c0d367736ee815a100b3891f0 linux-7.0.tar.xz + # From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc sha256 ce5c4f1205f9729286b569b037649591555f31ca1e03cc504bd3b70b8e58a8d5 linux-6.19.12.tar.xz sha256 a23c92faf3657385c2c6b5f4edd8f81b808907ebe603fa30699eae224da55f59 linux-6.18.22.tar.xz
package/linux-headers/7.0 new file +1 -0
@@ -0,0 +1 @@ +../../linux/from-6.17
package/linux-headers/Config.in.host +11 -2
@@ -3,7 +3,7 @@ comment "Kernel Header Options" choice prompt "Kernel Headers" default BR2_KERNEL_HEADERS_AS_KERNEL if BR2_LINUX_KERNEL - default BR2_KERNEL_HEADERS_6_19 + default BR2_KERNEL_HEADERS_7_0 help Select the kernel version to get headers from.
@@ -55,6 +55,10 @@ config BR2_KERNEL_HEADERS_6_18 config BR2_KERNEL_HEADERS_6_19 bool "Linux 6.19.x kernel headers" select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_19 + +config BR2_KERNEL_HEADERS_7_0 + bool "Linux 7.0.x kernel headers" + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_7_0 select BR2_KERNEL_HEADERS_LATEST config BR2_KERNEL_HEADERS_VERSION
@@ -133,8 +137,12 @@ choice If your kernel headers are more recent than the latest version in the choice, then select the latest version. +config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_7_0 + bool "7.0.x or later" + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_7_0 + config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_19 - bool "6.19.x or later" + bool "6.19.x" select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_19 config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18
@@ -471,6 +479,7 @@ config BR2_DEFAULT_KERNEL_HEADERS default "6.12.81" if BR2_KERNEL_HEADERS_6_12 default "6.18.22" if BR2_KERNEL_HEADERS_6_18 default "6.19.12" if BR2_KERNEL_HEADERS_6_19 + default "7.0" if BR2_KERNEL_HEADERS_7_0 default BR2_DEFAULT_KERNEL_VERSION if BR2_KERNEL_HEADERS_VERSION default "custom" if BR2_KERNEL_HEADERS_CUSTOM_TARBALL default BR2_KERNEL_HEADERS_CUSTOM_REPO_VERSION \
toolchain/Config.in +5 -0
@@ -676,6 +676,10 @@ config BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_18 config BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_19 bool select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_18 + +config BR2_TOOLCHAIN_HEADERS_AT_LEAST_7_0 + bool + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_19 select BR2_TOOLCHAIN_HEADERS_LATEST # This should be selected by the latest version, above, to indicate that
@@ -689,6 +693,7 @@ config BR2_TOOLCHAIN_HEADERS_LATEST # stops affecting a value on the first matching default. config BR2_TOOLCHAIN_HEADERS_AT_LEAST string + default "7.0" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_7_0 default "6.19" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_19 default "6.18" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_18 default "6.17" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_17
toolchain/toolchain-external/toolchain-external-custom/Config.in.options +5 -1
@@ -178,8 +178,12 @@ choice If your toolchain uses headers newer than the latest version in the choice, then select the latest version. +config BR2_TOOLCHAIN_EXTERNAL_HEADERS_7_0 + bool "7.0.x or later" + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_7_0 + config BR2_TOOLCHAIN_EXTERNAL_HEADERS_6_19 - bool "6.19.x or later" + bool "6.19.x" select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_19 config BR2_TOOLCHAIN_EXTERNAL_HEADERS_6_18
Signature · 6 lines
2.47.3 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH 4/4 linux: bump latest version to 7.0
In reply to Bernd KuhlsSigned-off-by Bernd Kuhls <[email protected]>
---
linux/{6.19.12 => 7.0} | 0
linux/Config.in | 6 +++---
2 files changed, 3 insertions(+), 3 deletions(-)
rename linux/{6.19.12 => 7.0} (100%)linux/7.0 renamed from linux/6.19.12 +0 -0
linux/Config.in +3 -3
@@ -28,8 +28,8 @@ choice prompt "Kernel version" config BR2_LINUX_KERNEL_LATEST_VERSION - bool "Latest version (6.19)" - select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_19 if BR2_KERNEL_HEADERS_AS_KERNEL + bool "Latest version (7.0)" + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_7_0 if BR2_KERNEL_HEADERS_AS_KERNEL # mips always generates an ITB image select BR2_PACKAGE_HOST_UBOOT_TOOLS if BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el select BR2_PACKAGE_HOST_UBOOT_TOOLS_FIT_SUPPORT if BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el
@@ -141,7 +141,7 @@ config BR2_LINUX_KERNEL_CUSTOM_REPO_GIT_SUBMODULES config BR2_LINUX_KERNEL_VERSION string - default "6.19.12" if BR2_LINUX_KERNEL_LATEST_VERSION + default "7.0" if BR2_LINUX_KERNEL_LATEST_VERSION default "5.10.246-cip66" if BR2_LINUX_KERNEL_LATEST_CIP_VERSION default "5.10.246-cip66-rt29" if BR2_LINUX_KERNEL_LATEST_CIP_RT_VERSION default BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE \
Signature · 6 lines
2.47.3 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Quoted 1 line · Bernd Kuhls
Signed-off-by Bernd Kuhls <[email protected]>
Series applied to master, thanks.
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot