Skip to contentSkip to conversation

ALSA: caiaq: Handle probe errors properly

PATCH New Takashi Iwai 1 participant 1 message Apr 14

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ALSA: caiaq: Handle probe errors properly

The probe procedure of setup_card() in caiaq driver doesn't treat the error cases gracefully, e.g. the error from snd_card_register() calls snd_card_free() but continues. This would lead to a UAF for the further calls like snd_usb_caiaq_control_init(), as Berk suggested in another patch in the link below.

However, the problem is not only that; in general, this function drops the all error handlings (as it's a void function) although its caller can propagate an error to snd_probe(), which eventually calls snd_card_free() as a proper error path. That said, we should treat each error case in setup_card(), and just return the error code promptly, which is then handled later as a fatal error in snd_probe().

This patch achieves it by changing the setup_card() to return an error code. Also, the superfluous snd_card_free() call is removed, too.

Note that card->private_free can be set still safely at returning an error. All called functions in card_free() have checks of the unassigned resources or NULL checks.

Fixes 8e3cd08ed8e5 ("[ALSA] caiaq - add control API and more input features")
---
 sound/usb/caiaq/device.c | 33 ++++++++++++++++++++++++---------
 1 file changed, 24 insertions(+), 9 deletions(-)
sound/usb/caiaq/device.c +24 -9
index 51177ebfb8c6..8af0c04041ee 100644
@@ -290,7 +290,7 @@ int snd_usb_caiaq_set_auto_msg(struct snd_usb_caiaqdev *cdev,
 					  tmp, sizeof(tmp));
 }
 
-static void setup_card(struct snd_usb_caiaqdev *cdev)
+static int setup_card(struct snd_usb_caiaqdev *cdev)
 {
 	int ret;
 	char val[4];
@@ -325,8 +325,10 @@ static void setup_card(struct snd_usb_caiaqdev *cdev)
 		snd_usb_caiaq_send_command(cdev, EP1_CMD_READ_IO, NULL, 0);
 
 		if (!wait_event_timeout(cdev->ep1_wait_queue,
-					cdev->control_state[0] != 0xff, HZ))
-			return;
+					cdev->control_state[0] != 0xff, HZ)) {
+			dev_err(dev, "Read timeout for control state\n");
+			return -EINVAL;
+		}
 
 		/* fix up some defaults */
 		if ((cdev->control_state[1] != 2) ||
@@ -347,33 +349,43 @@ static void setup_card(struct snd_usb_caiaqdev *cdev)
 	    cdev->spec.num_digital_audio_out +
 	    cdev->spec.num_digital_audio_in > 0) {
 		ret = snd_usb_caiaq_audio_init(cdev);
-		if (ret < 0)
+		if (ret < 0) {
 			dev_err(dev, "Unable to set up audio system (ret=%d)\n", ret);
+			return ret;
+		}
 	}
 
 	if (cdev->spec.num_midi_in +
 	    cdev->spec.num_midi_out > 0) {
 		ret = snd_usb_caiaq_midi_init(cdev);
-		if (ret < 0)
+		if (ret < 0) {
 			dev_err(dev, "Unable to set up MIDI system (ret=%d)\n", ret);
+			return ret;
+		}
 	}
 
 #ifdef CONFIG_SND_USB_CAIAQ_INPUT
 	ret = snd_usb_caiaq_input_init(cdev);
-	if (ret < 0)
+	if (ret < 0) {
 		dev_err(dev, "Unable to set up input system (ret=%d)\n", ret);
+		return ret;
+	}
 #endif
 
 	/* finally, register the card and all its sub-instances */
 	ret = snd_card_register(cdev->chip.card);
 	if (ret < 0) {
 		dev_err(dev, "snd_card_register() returned %d\n", ret);
-		snd_card_free(cdev->chip.card);
+		return ret;
 	}
 
 	ret = snd_usb_caiaq_control_init(cdev);
-	if (ret < 0)
+	if (ret < 0) {
 		dev_err(dev, "Unable to set up control system (ret=%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
 }
 
 static void card_free(struct snd_card *card)
@@ -499,8 +511,11 @@ static int init_card(struct snd_usb_caiaqdev *cdev)
 	scnprintf(card->longname, sizeof(card->longname), "%s %s (%s)",
 		       cdev->vendor_name, cdev->product_name, usbpath);
 
-	setup_card(cdev);
 	card->private_free = card_free;
+	err = setup_card(cdev);
+	if (err < 0)
+		return err;
+
 	return 0;
 
  err_kill_urb:
Signature · 1 line
2.53.0