Skip to contentSkip to conversation

wifi: mt76: mt7996: reduce phy work in set_coverage

PATCH New [email protected] 1 participant 1 message Apr 15

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 wifi: mt76: mt7996: reduce phy work in set_coverage

From: Dylan Eskew <[email protected]>

In mt7996_set_coverage_class(), each phy is iterated over in calling mt7996_mac_set_coverage_class(). Thus, the phy2 and phy3 configuration logic in mt7996_mac_set_coverage_class() can be dropped.

---
 drivers/net/wireless/mediatek/mt76/mt7996/mac.c | 10 ----------
 1 file changed, 10 deletions(-)
drivers/net/wireless/mediatek/mt76/mt7996/mac.c +0 -10
index e2a83da3a09c..55efa3df86a6 100644
@@ -2059,8 +2059,6 @@ void mt7996_mac_set_coverage_class(struct mt7996_phy *phy)
 {
 	s16 coverage_class = phy->coverage_class;
 	struct mt7996_dev *dev = phy->dev;
-	struct mt7996_phy *phy2 = mt7996_phy2(dev);
-	struct mt7996_phy *phy3 = mt7996_phy3(dev);
 	u32 reg_offset;
 	u32 cck = FIELD_PREP(MT_TIMEOUT_VAL_PLCP, 231) |
 		  FIELD_PREP(MT_TIMEOUT_VAL_CCA, 48);
@@ -2072,14 +2070,6 @@ void mt7996_mac_set_coverage_class(struct mt7996_phy *phy)
 	if (!test_bit(MT76_STATE_RUNNING, &phy->mt76->state))
 		return;
 
-	if (phy2)
-		coverage_class = max_t(s16, dev->phy.coverage_class,
-				       phy2->coverage_class);
-
-	if (phy3)
-		coverage_class = max_t(s16, coverage_class,
-				       phy3->coverage_class);
-
 	offset = 3 * coverage_class;
 	reg_offset = FIELD_PREP(MT_TIMEOUT_VAL_PLCP, offset) |
 		     FIELD_PREP(MT_TIMEOUT_VAL_CCA, offset);
Signature · 1 line
2.52.0