Skip to contentSkip to conversation

arm: dts: fsl-ls1088a: Enable SD device

PATCH In review Ye Li 2 participants 4 messages Apr 17 – Apr 20 Arm (32-bit)

lore
Share & tools
lore

Ye Li

author
#0 lore raw

PATCH 3/4 arm: dts: fsl-ls1088a: Enable SD device

Due to update of fsl-ls1088a.dtsi in previous patch, the esdhc node is disabled, so u-boot can't to probe any eSDHC controller.

Fixes fd4f7b0158d0 ("arm: dts: fsl-ls1088a: move and sync existing bindings to be under /soc")
---
 arch/arm/dts/fsl-ls1088a-u-boot.dtsi | 3 +++
 1 file changed, 3 insertions(+)
arch/arm/dts/fsl-ls1088a-u-boot.dtsi +3 -0
index efcfdd96aef..e2755740e5d 100644
@@ -61,3 +61,6 @@
 	compatible = "fsl,layerscape-dwc3", "snps,dwc3";
 };
 
+&esdhc {
+	status = "okay";
+};
Signature · 1 line
2.37.1
author
#1 lore raw

PATCH 4/4 arm: dts: fsl-ls1088a: Enable USB nodes

Enable USB nodes in -u-boot.dtsi. After sync dts with kernel, USB nodes status are set to disabled. So "usb start" does not work on ls1088ardb and ls1088aqds.

Fixes 10ff7e6b043b ("arm: dts: fsl-ls1088a: sync usb controller nodes with Linux")
---
 arch/arm/dts/fsl-ls1088a-u-boot.dtsi | 2 ++
 1 file changed, 2 insertions(+)
arch/arm/dts/fsl-ls1088a-u-boot.dtsi +2 -0
index e2755740e5d..8ae45f6a638 100644
@@ -55,10 +55,12 @@
 
 &usb0 {
 	compatible = "fsl,layerscape-dwc3", "snps,dwc3";
+	status = "okay";
 };
 
 &usb1 {
 	compatible = "fsl,layerscape-dwc3", "snps,dwc3";
+	status = "okay";
 };
 
 &esdhc {
Signature · 1 line
2.37.1
Reviewed-by on v1 4/4
#2 lore raw

Re: [PATCH 4/4] arm: dts: fsl-ls1088a: Enable USB nodes

Quoted 7 lines · Ye Li

Enable USB nodes in -u-boot.dtsi. After sync dts with kernel, USB nodes status are set to disabled. So "usb start" does not work on ls1088ardb and ls1088aqds.

Fixes 10ff7e6b043b ("arm: dts: fsl-ls1088a: sync usb controller nodes with Linux")