ext4/064 encryption + casefold feature combination WITHOUT dirdata
PATCH 1/2 ext4/064 encryption + casefold feature combination WITHOUT dirdata
From: Artem Blagodarenko <[email protected]>
This test verifies that files created in directories with both encryption and case-insensitive (casefold) attributes work correctly. See ext4/065 for the same test WITH dirdata feature enabled.
--- tests/ext4/064 | 154 +++++++++++++++++++++++++++++++++++++++++++++ tests/ext4/064.out | 17 +++++ 2 files changed, 171 insertions(+) create mode 100755 tests/ext4/064 create mode 100644 tests/ext4/064.out
tests/ext4/064 new file +154 -0
@@ -0,0 +1,154 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Copyright (c) 2026 The Lustre Collective. All Rights Reserved. +# Author: Artem Blagodarenko <[email protected]> +# +# FS QA Test ext4/064 +# +# Test ext4 encryption + casefold feature combination WITHOUT dirdata. +# This test verifies that files created in directories with both +# encryption and case-insensitive (casefold) attributes work correctly. +# See ext4/065 for the same test WITH dirdata feature enabled. +# +. ./common/preamble +_begin_fstest auto quick encrypt casefold + +# get standard environment and checks +. ./common/filter +. ./common/encrypt +. ./common/casefold +. ./common/attr + +_exclude_fs ext2 +_exclude_fs ext3 + +_require_scratch_nocheck +_require_encrypted_casefold +_require_command "$CHATTR_PROG" chattr +_require_command "$LSATTR_PROG" lsattr +_require_xfs_io_command "set_encpolicy" +_require_xfs_io_command "add_enckey" + +# Helper to add a v2 encryption key and set policy on a directory +_setup_encrypted_casefold_dir() +{ + local dir=$1 + local raw_key=$(_generate_raw_encryption_key) + local keyspec=$(_add_enckey $SCRATCH_MNT "$raw_key" | awk '{print $NF}') + _set_encpolicy $dir $keyspec + _casefold_set_attr $dir + echo $keyspec +} + +# Create a filesystem with both encrypt and casefold features +_scratch_mkfs -O encrypt,casefold &>>$seqres.full +_scratch_mount + +# Test 1: Create an encrypted + casefolded directory and verify lookups work +echo "Test 1: Basic encrypted casefold lookup" +mkdir $SCRATCH_MNT/test1 +_setup_encrypted_casefold_dir $SCRATCH_MNT/test1 > /dev/null + +# Create file with lowercase, lookup with uppercase +echo "hello" > $SCRATCH_MNT/test1/testfile.txt +if [ -f "$SCRATCH_MNT/test1/TESTFILE.TXT" ]; then + echo "Case-insensitive lookup works in encrypted dir" +else + echo "FAIL: Case-insensitive lookup failed in encrypted dir" +fi + +# Verify the exact name on disk is preserved +if _casefold_check_exact_name "$SCRATCH_MNT/test1" "testfile.txt"; then + echo "Original filename preserved" +else + echo "FAIL: Original filename not preserved" +fi + +# Test 2: Create files with different case variations +echo "Test 2: Conflicting names in encrypted casefold dir" +mkdir $SCRATCH_MNT/test2 +_setup_encrypted_casefold_dir $SCRATCH_MNT/test2 > /dev/null + +echo "first" > $SCRATCH_MNT/test2/MyFile.txt +# This should fail or overwrite since "MYFILE.TXT" is equivalent +echo "second" > $SCRATCH_MNT/test2/MYFILE.TXT 2>/dev/null +content=$(cat $SCRATCH_MNT/test2/myfile.txt) +echo "Content after writes: $content" + +# Test 3: Unicode normalization in encrypted casefold dir +echo "Test 3: Unicode in encrypted casefold dir" +mkdir $SCRATCH_MNT/test3 +_setup_encrypted_casefold_dir $SCRATCH_MNT/test3 > /dev/null + +# Test with UTF-8 characters +fr_file1=$(echo -e "cafe\xcc\x81.txt") +fr_file2=$(echo -e "caf\xc3\xa9.txt") +echo "french" > "$SCRATCH_MNT/test3/$fr_file1" +if [ -f "$SCRATCH_MNT/test3/$fr_file2" ]; then + echo "Unicode normalization works in encrypted dir" +else + echo "FAIL: Unicode normalization failed in encrypted dir" +fi + +# Test 4: Directory operations in encrypted casefold dir +echo "Test 4: Directory operations in encrypted casefold dir" +mkdir $SCRATCH_MNT/test4 +_setup_encrypted_casefold_dir $SCRATCH_MNT/test4 > /dev/null + +mkdir $SCRATCH_MNT/test4/SubDir +if [ -d "$SCRATCH_MNT/test4/SUBDIR" ]; then + echo "Directory case-insensitive lookup works" +else + echo "FAIL: Directory case-insensitive lookup failed" +fi + +# Test 5: Verify inheritance of casefold+encryption in subdirectories +echo "Test 5: Inheritance of attributes" +mkdir $SCRATCH_MNT/test5 +_setup_encrypted_casefold_dir $SCRATCH_MNT/test5 > /dev/null + +mkdir $SCRATCH_MNT/test5/child +echo "data" > $SCRATCH_MNT/test5/child/file.txt +if [ -f "$SCRATCH_MNT/test5/CHILD/FILE.TXT" ]; then + echo "Attributes inherited correctly" +else + echo "FAIL: Attributes not inherited" +fi + +# Test 6: Remove and recreate with different case +echo "Test 6: Remove and recreate with different case" +mkdir $SCRATCH_MNT/test6 +_setup_encrypted_casefold_dir $SCRATCH_MNT/test6 > /dev/null + +echo "original" > $SCRATCH_MNT/test6/RemoveMe.txt +rm $SCRATCH_MNT/test6/REMOVEME.TXT +echo "recreated" > $SCRATCH_MNT/test6/REMOVEME.TXT +if _casefold_check_exact_name "$SCRATCH_MNT/test6" "REMOVEME.TXT"; then + echo "Recreated file has new case" +else + echo "FAIL: Recreated file case incorrect" +fi + +# Test 7: Hard links in encrypted casefold dir +echo "Test 7: Hard links in encrypted casefold dir" +mkdir $SCRATCH_MNT/test7 +_setup_encrypted_casefold_dir $SCRATCH_MNT/test7 > /dev/null + +echo "linkdata" > $SCRATCH_MNT/test7/original.txt +ln $SCRATCH_MNT/test7/original.txt $SCRATCH_MNT/test7/hardlink.txt +if [ -f "$SCRATCH_MNT/test7/HARDLINK.TXT" ]; then + echo "Hard link case-insensitive lookup works" +else + echo "FAIL: Hard link case-insensitive lookup failed" +fi + +# Cleanup and verify filesystem +_scratch_unmount +_check_scratch_fs + +echo "Encrypted casefold tests completed" + +# success, all done +status=0 +exit
tests/ext4/064.out new file +17 -0
@@ -0,0 +1,17 @@ +QA output created by 064 +Test 1: Basic encrypted casefold lookup +Case-insensitive lookup works in encrypted dir +Original filename preserved +Test 2: Conflicting names in encrypted casefold dir +Content after writes: second +Test 3: Unicode in encrypted casefold dir +Unicode normalization works in encrypted dir +Test 4: Directory operations in encrypted casefold dir +Directory case-insensitive lookup works +Test 5: Inheritance of attributes +Attributes inherited correctly +Test 6: Remove and recreate with different case +Recreated file has new case +Test 7: Hard links in encrypted casefold dir +Hard link case-insensitive lookup works +Encrypted casefold tests completed
Signature · 1 line
2.43.5
PATCH 2/2 ext4/065 encryption + casefold + dirdata feature combination
From: Artem Blagodarenko <[email protected]>
Test ext4 encryption + casefold + dirdata feature combination. This test verifies that files created in directories with encryption, case-insensitive (casefold), and dirdata attributes work correctly. See ext4/064 for the same test WITHOUT dirdata feature.
--- tests/ext4/065 | 208 +++++++++++++++++++++++++++++++++++++++++++++ tests/ext4/065.out | 17 ++++ 2 files changed, 225 insertions(+) create mode 100755 tests/ext4/065 create mode 100644 tests/ext4/065.out
tests/ext4/065 new file +208 -0
@@ -0,0 +1,208 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2026 The Lustre Collective. All Rights Reserved. +# Author: Artem Blagodarenko <[email protected]> +# +# FS QA Test ext4/065 +# +# Test ext4 encryption + casefold + dirdata feature combination. +# This test verifies that files created in directories with encryption, +# case-insensitive (casefold), and dirdata attributes work correctly. +# See ext4/064 for the same test WITHOUT dirdata feature. +# +. ./common/preamble +_begin_fstest auto quick encrypt casefold + +# get standard environment and checks +. ./common/filter +. ./common/encrypt +. ./common/casefold +. ./common/attr + +_exclude_fs ext2 +_exclude_fs ext3 + +# Check if dirdata feature is supported and can be used with encrypt+casefold +_require_scratch_dirdata() +{ + if test ! -f /sys/fs/ext4/features/dirdata ; then + _notrun "dirdata feature not supported by kernel" + fi + + # Debug: log e2fsprogs tool paths and versions + echo "=== _require_scratch_dirdata debug info ===" >> $seqres.full + echo "E2FSCK_PROG: $E2FSCK_PROG" >> $seqres.full + echo "E2FSCK_PROG resolved: $(type -P e2fsck)" >> $seqres.full + echo "MKFS_EXT4_PROG: $MKFS_EXT4_PROG" >> $seqres.full + echo "fsck -t ext4 resolves to: $(type -P fsck.ext4)" >> $seqres.full + $E2FSCK_PROG -V >> $seqres.full 2>&1 + $MKFS_EXT4_PROG -V >> $seqres.full 2>&1 + echo "=== end debug info ===" >> $seqres.full + + # Also verify that mkfs supports dirdata + if ! $MKFS_EXT4_PROG -O dirdata -n $SCRATCH_DEV &>>$seqres.full ; then + _notrun "mkfs.ext4 does not support dirdata feature" + fi + + # Verify kernel can mount filesystem with encrypt+casefold+dirdata + echo "Running: _scratch_mkfs -O encrypt,casefold,dirdata" >> $seqres.full + if ! _scratch_mkfs -O encrypt,casefold,dirdata &>>$seqres.full ; then + _notrun "failed to create filesystem with encrypt+casefold+dirdata" + fi + if ! _try_scratch_mount &>>$seqres.full ; then + _notrun "kernel cannot mount filesystem with encrypt+casefold+dirdata" + fi + _scratch_unmount +} + +_require_scratch_nocheck +_require_encrypted_casefold +_require_scratch_dirdata +_require_command "$CHATTR_PROG" chattr +_require_command "$LSATTR_PROG" lsattr +_require_xfs_io_command "set_encpolicy" +_require_xfs_io_command "add_enckey" + +# Helper to add a v2 encryption key and set policy on a directory +_setup_encrypted_casefold_dir() +{ + local dir=$1 + local raw_key=$(_generate_raw_encryption_key) + local keyspec=$(_add_enckey $SCRATCH_MNT "$raw_key" | awk '{print $NF}') + _set_encpolicy $dir $keyspec + _casefold_set_attr $dir + echo $keyspec +} + +# Create a filesystem with encrypt, casefold, and dirdata features +# Debug: log e2fsprogs tool paths and versions +echo "=== e2fsprogs debug info ===" >> $seqres.full +echo "E2FSCK_PROG: $E2FSCK_PROG" >> $seqres.full +echo "E2FSCK_PROG resolved: $(type -P e2fsck)" >> $seqres.full +echo "MKFS_EXT4_PROG: $MKFS_EXT4_PROG" >> $seqres.full +echo "FSCK_OPTIONS: $FSCK_OPTIONS" >> $seqres.full +echo "fsck -t ext4 resolves to: $(type -P fsck.ext4)" >> $seqres.full +$E2FSCK_PROG -V >> $seqres.full 2>&1 +$MKFS_EXT4_PROG -V >> $seqres.full 2>&1 +echo "=== end e2fsprogs debug info ===" >> $seqres.full + +_scratch_mkfs -O encrypt,casefold,dirdata &>>$seqres.full +_scratch_mount + +# Test 1: Create an encrypted + casefolded directory and verify lookups work +echo "Test 1: Basic encrypted casefold lookup with dirdata" +mkdir $SCRATCH_MNT/test1 +_setup_encrypted_casefold_dir $SCRATCH_MNT/test1 > /dev/null + +# Create file with lowercase, lookup with uppercase +echo "hello" > $SCRATCH_MNT/test1/testfile.txt +if [ -f "$SCRATCH_MNT/test1/TESTFILE.TXT" ]; then + echo "Case-insensitive lookup works in encrypted dir" +else + echo "FAIL: Case-insensitive lookup failed in encrypted dir" +fi + +# Verify the exact name on disk is preserved +if _casefold_check_exact_name "$SCRATCH_MNT/test1" "testfile.txt"; then + echo "Original filename preserved" +else + echo "FAIL: Original filename not preserved" +fi + +# Test 2: Create files with different case variations +echo "Test 2: Conflicting names in encrypted casefold dir" +mkdir $SCRATCH_MNT/test2 +_setup_encrypted_casefold_dir $SCRATCH_MNT/test2 > /dev/null + +echo "first" > $SCRATCH_MNT/test2/MyFile.txt +# This should fail or overwrite since "MYFILE.TXT" is equivalent +echo "second" > $SCRATCH_MNT/test2/MYFILE.TXT 2>/dev/null +content=$(cat $SCRATCH_MNT/test2/myfile.txt) +echo "Content after writes: $content" + +# Test 3: Unicode normalization in encrypted casefold dir +echo "Test 3: Unicode in encrypted casefold dir" +mkdir $SCRATCH_MNT/test3 +_setup_encrypted_casefold_dir $SCRATCH_MNT/test3 > /dev/null + +# Test with UTF-8 characters +fr_file1=$(echo -e "cafe\xcc\x81.txt") +fr_file2=$(echo -e "caf\xc3\xa9.txt") +echo "french" > "$SCRATCH_MNT/test3/$fr_file1" +if [ -f "$SCRATCH_MNT/test3/$fr_file2" ]; then + echo "Unicode normalization works in encrypted dir" +else + echo "FAIL: Unicode normalization failed in encrypted dir" +fi + +# Test 4: Directory operations in encrypted casefold dir +echo "Test 4: Directory operations in encrypted casefold dir" +mkdir $SCRATCH_MNT/test4 +_setup_encrypted_casefold_dir $SCRATCH_MNT/test4 > /dev/null + +mkdir $SCRATCH_MNT/test4/SubDir +if [ -d "$SCRATCH_MNT/test4/SUBDIR" ]; then + echo "Directory case-insensitive lookup works" +else + echo "FAIL: Directory case-insensitive lookup failed" +fi + +# Test 5: Verify inheritance of casefold+encryption in subdirectories +echo "Test 5: Inheritance of attributes" +mkdir $SCRATCH_MNT/test5 +_setup_encrypted_casefold_dir $SCRATCH_MNT/test5 > /dev/null + +mkdir $SCRATCH_MNT/test5/child +echo "data" > $SCRATCH_MNT/test5/child/file.txt +if [ -f "$SCRATCH_MNT/test5/CHILD/FILE.TXT" ]; then + echo "Attributes inherited correctly" +else + echo "FAIL: Attributes not inherited" +fi + +# Test 6: Remove and recreate with different case +echo "Test 6: Remove and recreate with different case" +mkdir $SCRATCH_MNT/test6 +_setup_encrypted_casefold_dir $SCRATCH_MNT/test6 > /dev/null + +echo "original" > $SCRATCH_MNT/test6/RemoveMe.txt +rm $SCRATCH_MNT/test6/REMOVEME.TXT +echo "recreated" > $SCRATCH_MNT/test6/REMOVEME.TXT +if _casefold_check_exact_name "$SCRATCH_MNT/test6" "REMOVEME.TXT"; then + echo "Recreated file has new case" +else + echo "FAIL: Recreated file case incorrect" +fi + +# Test 7: Hard links in encrypted casefold dir +echo "Test 7: Hard links in encrypted casefold dir" +mkdir $SCRATCH_MNT/test7 +_setup_encrypted_casefold_dir $SCRATCH_MNT/test7 > /dev/null + +echo "linkdata" > $SCRATCH_MNT/test7/original.txt +ln $SCRATCH_MNT/test7/original.txt $SCRATCH_MNT/test7/hardlink.txt +if [ -f "$SCRATCH_MNT/test7/HARDLINK.TXT" ]; then + echo "Hard link case-insensitive lookup works" +else + echo "FAIL: Hard link case-insensitive lookup failed" +fi + +# Cleanup and verify filesystem +_scratch_unmount + +# Debug: log e2fsprogs tool paths before _check_scratch_fs +echo "=== e2fsprogs debug info (before _check_scratch_fs) ===" >> $seqres.full +echo "E2FSCK_PROG: $E2FSCK_PROG" >> $seqres.full +echo "E2FSCK_PROG resolved: $(type -P e2fsck)" >> $seqres.full +echo "fsck -t ext4 resolves to: $(type -P fsck.ext4)" >> $seqres.full +echo "FSCK_OPTIONS: $FSCK_OPTIONS" >> $seqres.full +$E2FSCK_PROG -V >> $seqres.full 2>&1 +echo "=== end e2fsprogs debug info ===" >> $seqres.full + +_check_scratch_fs + +echo "Encrypted casefold tests with dirdata completed" + +# success, all done +status=0 +exit
tests/ext4/065.out new file +17 -0
@@ -0,0 +1,17 @@ +QA output created by 065 +Test 1: Basic encrypted casefold lookup with dirdata +Case-insensitive lookup works in encrypted dir +Original filename preserved +Test 2: Conflicting names in encrypted casefold dir +Content after writes: second +Test 3: Unicode in encrypted casefold dir +Unicode normalization works in encrypted dir +Test 4: Directory operations in encrypted casefold dir +Directory case-insensitive lookup works +Test 5: Inheritance of attributes +Attributes inherited correctly +Test 6: Remove and recreate with different case +Recreated file has new case +Test 7: Hard links in encrypted casefold dir +Hard link case-insensitive lookup works +Encrypted casefold tests with dirdata completed
Signature · 1 line
2.43.5
Re: [PATCH 2/2] ext4/065 encryption + casefold + dirdata feature combination
Quoted 8 lines · Artem Blagodarenko
From: Artem Blagodarenko <[email protected]>
Test ext4 encryption + casefold + dirdata feature combination. This test verifies that files created in directories with encryption, case-insensitive (casefold), and dirdata attributes work correctly. See ext4/064 for the same test WITHOUT dirdata feature.
Signed-off-by Artem Blagodarenko <[email protected]>
Note that the dirdata feature patches have not landed, and I've expressed concerns of this patch set[1].
[1] https://lore.kernel.org/all/[email protected]/
From manual code inspection, the dirdata patch was never changing how the data was stored. So before we land the xfstests changes, could you please add support in debugfs to set and get the dirdata stored for a directory entry, and then change the test to actually _validate_ that when enabling encryption + casefold + dirdata, that the encrypted hash is stored as a dirdata attribute?
Thanks,
- Ted
Quoted 37 lines · Artem Blagodarenko
From: Artem Blagodarenko <[email protected]>
This test verifies that files created in directories with both encryption and case-insensitive (casefold) attributes work correctly. See ext4/065 for the same test WITH dirdata feature enabled.
Signed-off-by Artem Blagodarenko <[email protected]>--- tests/ext4/064 | 154 +++++++++++++++++++++++++++++++++++++++++++++ tests/ext4/064.out | 17 +++++ 2 files changed, 171 insertions(+) create mode 100755 tests/ext4/064 create mode 100644 tests/ext4/064.outtests/ext4/064 new file +17
-0@@ -0,0 +1,154 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Copyright (c) 2026 The Lustre Collective. All Rights Reserved. +# Author: Artem Blagodarenko <[email protected]> +# +# FS QA Test ext4/064 +# +# Test ext4 encryption + casefold feature combination WITHOUT dirdata. +# This test verifies that files created in directories with both +# encryption and case-insensitive (casefold) attributes work correctly. +# See ext4/065 for the same test WITH dirdata feature enabled. +# +. ./common/preamble +_begin_fstest auto quick encrypt casefold + +# get standard environment and checks
tests/ext4/064 line 27
Quoted 10 lines
tests/ext4/064 new file +10
-0+. ./common/filter +. ./common/encrypt +. ./common/casefold +. ./common/attr + +_exclude_fs ext2 +_exclude_fs ext3 + +_require_scratch_nocheck +_require_encrypted_casefold
Do you want to write a new helper names _require_encrypted_casefold? Or do you mean _require_scratch_casefold at here?
CC ext4-list to get more review points.
Thanks,
Zorro
Quoted 154 lines
tests/ext4/064 new file +127
-0+_require_command "$CHATTR_PROG" chattr +_require_command "$LSATTR_PROG" lsattr +_require_xfs_io_command "set_encpolicy" +_require_xfs_io_command "add_enckey" + +# Helper to add a v2 encryption key and set policy on a directory +_setup_encrypted_casefold_dir() +{ + local dir=$1 + local raw_key=$(_generate_raw_encryption_key) + local keyspec=$(_add_enckey $SCRATCH_MNT "$raw_key" | awk '{print $NF}') + _set_encpolicy $dir $keyspec + _casefold_set_attr $dir + echo $keyspec +} + +# Create a filesystem with both encrypt and casefold features +_scratch_mkfs -O encrypt,casefold &>>$seqres.full +_scratch_mount + +# Test 1: Create an encrypted + casefolded directory and verify lookups work +echo "Test 1: Basic encrypted casefold lookup" +mkdir $SCRATCH_MNT/test1 +_setup_encrypted_casefold_dir $SCRATCH_MNT/test1 > /dev/null + +# Create file with lowercase, lookup with uppercase +echo "hello" > $SCRATCH_MNT/test1/testfile.txt +if [ -f "$SCRATCH_MNT/test1/TESTFILE.TXT" ]; then + echo "Case-insensitive lookup works in encrypted dir" +else + echo "FAIL: Case-insensitive lookup failed in encrypted dir" +fi + +# Verify the exact name on disk is preserved +if _casefold_check_exact_name "$SCRATCH_MNT/test1" "testfile.txt"; then + echo "Original filename preserved" +else + echo "FAIL: Original filename not preserved" +fi + +# Test 2: Create files with different case variations +echo "Test 2: Conflicting names in encrypted casefold dir" +mkdir $SCRATCH_MNT/test2 +_setup_encrypted_casefold_dir $SCRATCH_MNT/test2 > /dev/null + +echo "first" > $SCRATCH_MNT/test2/MyFile.txt +# This should fail or overwrite since "MYFILE.TXT" is equivalent +echo "second" > $SCRATCH_MNT/test2/MYFILE.TXT 2>/dev/null +content=$(cat $SCRATCH_MNT/test2/myfile.txt) +echo "Content after writes: $content" + +# Test 3: Unicode normalization in encrypted casefold dir +echo "Test 3: Unicode in encrypted casefold dir" +mkdir $SCRATCH_MNT/test3 +_setup_encrypted_casefold_dir $SCRATCH_MNT/test3 > /dev/null + +# Test with UTF-8 characters +fr_file1=$(echo -e "cafe\xcc\x81.txt") +fr_file2=$(echo -e "caf\xc3\xa9.txt") +echo "french" > "$SCRATCH_MNT/test3/$fr_file1" +if [ -f "$SCRATCH_MNT/test3/$fr_file2" ]; then + echo "Unicode normalization works in encrypted dir" +else + echo "FAIL: Unicode normalization failed in encrypted dir" +fi + +# Test 4: Directory operations in encrypted casefold dir +echo "Test 4: Directory operations in encrypted casefold dir" +mkdir $SCRATCH_MNT/test4 +_setup_encrypted_casefold_dir $SCRATCH_MNT/test4 > /dev/null + +mkdir $SCRATCH_MNT/test4/SubDir +if [ -d "$SCRATCH_MNT/test4/SUBDIR" ]; then + echo "Directory case-insensitive lookup works" +else + echo "FAIL: Directory case-insensitive lookup failed" +fi + +# Test 5: Verify inheritance of casefold+encryption in subdirectories +echo "Test 5: Inheritance of attributes" +mkdir $SCRATCH_MNT/test5 +_setup_encrypted_casefold_dir $SCRATCH_MNT/test5 > /dev/null + +mkdir $SCRATCH_MNT/test5/child +echo "data" > $SCRATCH_MNT/test5/child/file.txt +if [ -f "$SCRATCH_MNT/test5/CHILD/FILE.TXT" ]; then + echo "Attributes inherited correctly" +else + echo "FAIL: Attributes not inherited" +fi + +# Test 6: Remove and recreate with different case +echo "Test 6: Remove and recreate with different case" +mkdir $SCRATCH_MNT/test6 +_setup_encrypted_casefold_dir $SCRATCH_MNT/test6 > /dev/null + +echo "original" > $SCRATCH_MNT/test6/RemoveMe.txt +rm $SCRATCH_MNT/test6/REMOVEME.TXT +echo "recreated" > $SCRATCH_MNT/test6/REMOVEME.TXT +if _casefold_check_exact_name "$SCRATCH_MNT/test6" "REMOVEME.TXT"; then + echo "Recreated file has new case" +else + echo "FAIL: Recreated file case incorrect" +fi + +# Test 7: Hard links in encrypted casefold dir +echo "Test 7: Hard links in encrypted casefold dir" +mkdir $SCRATCH_MNT/test7 +_setup_encrypted_casefold_dir $SCRATCH_MNT/test7 > /dev/null + +echo "linkdata" > $SCRATCH_MNT/test7/original.txt +ln $SCRATCH_MNT/test7/original.txt $SCRATCH_MNT/test7/hardlink.txt +if [ -f "$SCRATCH_MNT/test7/HARDLINK.TXT" ]; then + echo "Hard link case-insensitive lookup works" +else + echo "FAIL: Hard link case-insensitive lookup failed" +fi + +# Cleanup and verify filesystem +_scratch_unmount +_check_scratch_fs + +echo "Encrypted casefold tests completed" + +# success, all done +status=0 +exittests/ext4/064.out new file +17
-0@@ -0,0 +1,17 @@ +QA output created by 064 +Test 1: Basic encrypted casefold lookup +Case-insensitive lookup works in encrypted dir +Original filename preserved +Test 2: Conflicting names in encrypted casefold dir +Content after writes: second +Test 3: Unicode in encrypted casefold dir +Unicode normalization works in encrypted dir +Test 4: Directory operations in encrypted casefold dir +Directory case-insensitive lookup works +Test 5: Inheritance of attributes +Attributes inherited correctly +Test 6: Remove and recreate with different case +Recreated file has new case +Test 7: Hard links in encrypted casefold dir +Hard link case-insensitive lookup works +Encrypted casefold tests completedSignature · 1 line
2.43.5