Skip to contentSkip to conversation

net: remove ISDN subsystem and Bluetooth CMTP

PATCH Applied Jakub Kicinski 9 participants 9 messages Apr 21 – Apr 30

Subsystems (5)
lore
Share & tools
lore

Jakub Kicinski

author maintainer
#0 lore raw

PATCH 1/1 net: remove ISDN subsystem and Bluetooth CMTP

Remove the ISDN (mISDN, CAPI) subsystem and Bluetooth CMTP protocol from the kernel tree.

ISDN is a pretty old technology and it's unclear whether anyone still uses it. I went over the last few years of git history and all the commits are either tree-wide conversions or syzbot/static analyzer fixes.

When we discussed removal in the past IIRC there were some concerns about ISDN still being used in parts of Germany. Unfortunately, the code base is quite old, none of the current maintainers are familiar with it and AI tools will have a field day finding bugs here.

Delete this code and preserve it in an out-of-tree repository for any remaining users:
https://github.com/linux-netdev/mod-orphan

UAPI constants AF_ISDN/PF_ISDN and the SELinux isdn_socket class are preserved for ABI stability, but the rest of uAPI is removed.

---
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]

---
 MAINTAINERS                                 |   19 -
 Documentation/isdn/credits.rst              |   73 -
 Documentation/isdn/index.rst                |   14 -
 Documentation/isdn/interface_capi.rst       |  336 --
 Documentation/isdn/m_isdn.rst               |    9 -
 Documentation/subsystem-apis.rst            |    1 -
 drivers/Kconfig                             |    2 -
 drivers/isdn/Kconfig                        |   27 -
 drivers/isdn/capi/Kconfig                   |   32 -
 drivers/isdn/hardware/mISDN/Kconfig         |   98 -
 drivers/isdn/mISDN/Kconfig                  |   48 -
 net/bluetooth/Kconfig                       |    3 -
 net/bluetooth/cmtp/Kconfig                  |   12 -
 drivers/Makefile                            |    1 -
 drivers/isdn/Makefile                       |    8 -
 drivers/isdn/capi/Makefile                  |    6 -
 drivers/isdn/hardware/Makefile              |    6 -
 drivers/isdn/hardware/mISDN/Makefile        |   19 -
 drivers/isdn/mISDN/Makefile                 |   14 -
 net/bluetooth/Makefile                      |    1 -
 net/bluetooth/cmtp/Makefile                 |    8 -
 drivers/isdn/capi/kcapi.h                   |  182 -
 drivers/isdn/hardware/mISDN/hfc_multi.h     | 1236 -----
 drivers/isdn/hardware/mISDN/hfc_multi_8xx.h |  167 -
 drivers/isdn/hardware/mISDN/hfc_pci.h       |  214 -
 drivers/isdn/hardware/mISDN/hfcsusb.h       |  425 --
 drivers/isdn/hardware/mISDN/iohelper.h      |   96 -
 drivers/isdn/hardware/mISDN/ipac.h          |  393 --
 drivers/isdn/hardware/mISDN/isar.h          |  256 -
 drivers/isdn/hardware/mISDN/isdnhdlc.h      |   69 -
 drivers/isdn/hardware/mISDN/netjet.h        |   44 -
 drivers/isdn/hardware/mISDN/w6692.h         |  177 -
 drivers/isdn/mISDN/core.h                   |   69 -
 drivers/isdn/mISDN/dsp.h                    |  277 -
 drivers/isdn/mISDN/dsp_biquad.h             |   51 -
 drivers/isdn/mISDN/dsp_ecdis.h              |   96 -
 drivers/isdn/mISDN/dsp_hwec.h               |   10 -
 drivers/isdn/mISDN/fsm.h                    |   58 -
 drivers/isdn/mISDN/l1oip.h                  |   92 -
 drivers/isdn/mISDN/layer1.h                 |   16 -
 drivers/isdn/mISDN/layer2.h                 |  131 -
 include/linux/isdn/capilli.h                |   95 -
 include/linux/isdn/capiutil.h               |   60 -
 include/linux/kernelcapi.h                  |   45 -
 include/linux/mISDNdsp.h                    |   40 -
 include/linux/mISDNhw.h                     |  192 -
 include/linux/mISDNif.h                     |  603 --
 include/uapi/linux/capi.h                   |  134 -
 include/uapi/linux/isdn/capicmd.h           |  117 -
 include/uapi/linux/kernelcapi.h             |   48 -
 net/bluetooth/cmtp/cmtp.h                   |  129 -
 drivers/isdn/capi/capi.c                    | 1435 -----
 drivers/isdn/capi/capiutil.c                |  677 ---
 drivers/isdn/capi/kcapi.c                   |  933 ----
 drivers/isdn/capi/kcapi_proc.c              |  231 -
 drivers/isdn/hardware/mISDN/avmfritz.c      | 1164 ----
 drivers/isdn/hardware/mISDN/hfcmulti.c      | 5540 -------------------
 drivers/isdn/hardware/mISDN/hfcpci.c        | 2360 --------
 drivers/isdn/hardware/mISDN/hfcsusb.c       | 2157 --------
 drivers/isdn/hardware/mISDN/isdnhdlc.c      |  617 ---
 drivers/isdn/hardware/mISDN/mISDNinfineon.c | 1168 ----
 drivers/isdn/hardware/mISDN/mISDNipac.c     | 1636 ------
 drivers/isdn/hardware/mISDN/mISDNisar.c     | 1694 ------
 drivers/isdn/hardware/mISDN/netjet.c        | 1154 ----
 drivers/isdn/hardware/mISDN/speedfax.c      |  520 --
 drivers/isdn/hardware/mISDN/w6692.c         | 1417 -----
 drivers/isdn/mISDN/clock.c                  |  197 -
 drivers/isdn/mISDN/core.c                   |  400 --
 drivers/isdn/mISDN/dsp_audio.c              |  421 --
 drivers/isdn/mISDN/dsp_blowfish.c           |  667 ---
 drivers/isdn/mISDN/dsp_cmx.c                | 1949 -------
 drivers/isdn/mISDN/dsp_core.c               | 1227 ----
 drivers/isdn/mISDN/dsp_dtmf.c               |  313 --
 drivers/isdn/mISDN/dsp_hwec.c               |  122 -
 drivers/isdn/mISDN/dsp_pipeline.c           |  300 -
 drivers/isdn/mISDN/dsp_tones.c              |  550 --
 drivers/isdn/mISDN/fsm.c                    |  176 -
 drivers/isdn/mISDN/hwchannel.c              |  516 --
 drivers/isdn/mISDN/l1oip_codec.c            |  358 --
 drivers/isdn/mISDN/l1oip_core.c             | 1505 -----
 drivers/isdn/mISDN/layer1.c                 |  415 --
 drivers/isdn/mISDN/layer2.c                 | 2266 --------
 drivers/isdn/mISDN/socket.c                 |  825 ---
 drivers/isdn/mISDN/stack.c                  |  654 ---
 drivers/isdn/mISDN/tei.c                    | 1416 -----
 drivers/isdn/mISDN/timerdev.c               |  295 -
 net/bluetooth/cmtp/capi.c                   |  579 --
 net/bluetooth/cmtp/core.c                   |  519 --
 net/bluetooth/cmtp/sock.c                   |  271 -
 CREDITS                                     |    5 +
 90 files changed, 5 insertions(+), 44903 deletions(-)
 delete mode 100644 Documentation/isdn/credits.rst
 delete mode 100644 Documentation/isdn/index.rst
 delete mode 100644 Documentation/isdn/interface_capi.rst
 delete mode 100644 Documentation/isdn/m_isdn.rst
 delete mode 100644 drivers/isdn/Kconfig
 delete mode 100644 drivers/isdn/capi/Kconfig
 delete mode 100644 drivers/isdn/hardware/mISDN/Kconfig
 delete mode 100644 drivers/isdn/mISDN/Kconfig
 delete mode 100644 net/bluetooth/cmtp/Kconfig
 delete mode 100644 drivers/isdn/Makefile
 delete mode 100644 drivers/isdn/capi/Makefile
 delete mode 100644 drivers/isdn/hardware/Makefile
 delete mode 100644 drivers/isdn/hardware/mISDN/Makefile
 delete mode 100644 drivers/isdn/mISDN/Makefile
 delete mode 100644 net/bluetooth/cmtp/Makefile
 delete mode 100644 drivers/isdn/capi/kcapi.h
 delete mode 100644 drivers/isdn/hardware/mISDN/hfc_multi.h
 delete mode 100644 drivers/isdn/hardware/mISDN/hfc_multi_8xx.h
 delete mode 100644 drivers/isdn/hardware/mISDN/hfc_pci.h
 delete mode 100644 drivers/isdn/hardware/mISDN/hfcsusb.h
 delete mode 100644 drivers/isdn/hardware/mISDN/iohelper.h
 delete mode 100644 drivers/isdn/hardware/mISDN/ipac.h
 delete mode 100644 drivers/isdn/hardware/mISDN/isar.h
 delete mode 100644 drivers/isdn/hardware/mISDN/isdnhdlc.h
 delete mode 100644 drivers/isdn/hardware/mISDN/netjet.h
 delete mode 100644 drivers/isdn/hardware/mISDN/w6692.h
 delete mode 100644 drivers/isdn/mISDN/core.h
 delete mode 100644 drivers/isdn/mISDN/dsp.h
 delete mode 100644 drivers/isdn/mISDN/dsp_biquad.h
 delete mode 100644 drivers/isdn/mISDN/dsp_ecdis.h
 delete mode 100644 drivers/isdn/mISDN/dsp_hwec.h
 delete mode 100644 drivers/isdn/mISDN/fsm.h
 delete mode 100644 drivers/isdn/mISDN/l1oip.h
 delete mode 100644 drivers/isdn/mISDN/layer1.h
 delete mode 100644 drivers/isdn/mISDN/layer2.h
 delete mode 100644 include/linux/isdn/capilli.h
 delete mode 100644 include/linux/isdn/capiutil.h
 delete mode 100644 include/linux/kernelcapi.h
 delete mode 100644 include/linux/mISDNdsp.h
 delete mode 100644 include/linux/mISDNhw.h
 delete mode 100644 include/linux/mISDNif.h
 delete mode 100644 include/uapi/linux/capi.h
 delete mode 100644 include/uapi/linux/isdn/capicmd.h
 delete mode 100644 include/uapi/linux/kernelcapi.h
 delete mode 100644 net/bluetooth/cmtp/cmtp.h
 delete mode 100644 drivers/isdn/capi/capi.c
 delete mode 100644 drivers/isdn/capi/capiutil.c
 delete mode 100644 drivers/isdn/capi/kcapi.c
 delete mode 100644 drivers/isdn/capi/kcapi_proc.c
 delete mode 100644 drivers/isdn/hardware/mISDN/avmfritz.c
 delete mode 100644 drivers/isdn/hardware/mISDN/hfcmulti.c
 delete mode 100644 drivers/isdn/hardware/mISDN/hfcpci.c
 delete mode 100644 drivers/isdn/hardware/mISDN/hfcsusb.c
 delete mode 100644 drivers/isdn/hardware/mISDN/isdnhdlc.c
 delete mode 100644 drivers/isdn/hardware/mISDN/mISDNinfineon.c
 delete mode 100644 drivers/isdn/hardware/mISDN/mISDNipac.c
 delete mode 100644 drivers/isdn/hardware/mISDN/mISDNisar.c
 delete mode 100644 drivers/isdn/hardware/mISDN/netjet.c
 delete mode 100644 drivers/isdn/hardware/mISDN/speedfax.c
 delete mode 100644 drivers/isdn/hardware/mISDN/w6692.c
 delete mode 100644 drivers/isdn/mISDN/clock.c
 delete mode 100644 drivers/isdn/mISDN/core.c
 delete mode 100644 drivers/isdn/mISDN/dsp_audio.c
 delete mode 100644 drivers/isdn/mISDN/dsp_blowfish.c
 delete mode 100644 drivers/isdn/mISDN/dsp_cmx.c
 delete mode 100644 drivers/isdn/mISDN/dsp_core.c
 delete mode 100644 drivers/isdn/mISDN/dsp_dtmf.c
 delete mode 100644 drivers/isdn/mISDN/dsp_hwec.c
 delete mode 100644 drivers/isdn/mISDN/dsp_pipeline.c
 delete mode 100644 drivers/isdn/mISDN/dsp_tones.c
 delete mode 100644 drivers/isdn/mISDN/fsm.c
 delete mode 100644 drivers/isdn/mISDN/hwchannel.c
 delete mode 100644 drivers/isdn/mISDN/l1oip_codec.c
 delete mode 100644 drivers/isdn/mISDN/l1oip_core.c
 delete mode 100644 drivers/isdn/mISDN/layer1.c
 delete mode 100644 drivers/isdn/mISDN/layer2.c
 delete mode 100644 drivers/isdn/mISDN/socket.c
 delete mode 100644 drivers/isdn/mISDN/stack.c
 delete mode 100644 drivers/isdn/mISDN/tei.c
 delete mode 100644 drivers/isdn/mISDN/timerdev.c
 delete mode 100644 net/bluetooth/cmtp/capi.c
 delete mode 100644 net/bluetooth/cmtp/core.c
 delete mode 100644 net/bluetooth/cmtp/sock.c
MAINTAINERS +0 -19
index 6eb1a3ec60f1..cfcf422dd40a 100644
@@ -13560,25 +13560,6 @@ S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending.git master
 F:	drivers/infiniband/ulp/isert
 
-ISDN/CMTP OVER BLUETOOTH
-L:	[email protected]
-S:	Orphan
-W:	http://www.isdn4linux.de
-F:	Documentation/isdn/
-F:	drivers/isdn/capi/
-F:	include/linux/isdn/
-F:	include/uapi/linux/isdn/
-F:	net/bluetooth/cmtp/
-
-ISDN/mISDN SUBSYSTEM
-L:	[email protected]
-S:	Orphan
-W:	http://www.isdn4linux.de
-F:	drivers/isdn/Kconfig
-F:	drivers/isdn/Makefile
-F:	drivers/isdn/hardware/
-F:	drivers/isdn/mISDN/
-
 ISL28022 HARDWARE MONITORING DRIVER
 M:	Carsten Spieß <[email protected]>
 L:	[email protected]
Documentation/isdn/credits.rst deleted +0 -73

73 lines not on this page · raw message

Documentation/isdn/index.rst deleted +0 -14
deleted file mode 100644
index d1125a16a746..000000000000
@@ -1,14 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-====
-ISDN
-====
-
-.. toctree::
-   :maxdepth: 2
-
-   interface_capi
-
-   m_isdn
-
-   credits
Documentation/isdn/interface_capi.rst deleted +0 -336

336 lines not on this page · raw message

Documentation/isdn/m_isdn.rst deleted +0 -9
deleted file mode 100644
index 5847a164287e..000000000000
@@ -1,9 +0,0 @@
-============
-mISDN Driver
-============
-
-mISDN is a new modular ISDN driver, in the long term it should replace
-the old I4L driver architecture for passive ISDN cards.
-It was designed to allow a broad range of applications and interfaces
-but only have the basic function in kernel, the interface to the user
-space is based on sockets with a own address family AF_ISDN.
Documentation/subsystem-apis.rst +0 -1
index ff4fe8c936c8..b1ad48bb4001 100644
@@ -46,7 +46,6 @@ Networking interfaces
    networking/index
    netlabel/index
    infiniband/index
-   isdn/index
    mhi/index
 
 Storage interfaces
drivers/Kconfig +0 -2
index c0f1fb893ec0..f2bed2ddeb66 100644
@@ -61,8 +61,6 @@ source "drivers/macintosh/Kconfig"
 
 source "drivers/net/Kconfig"
 
-source "drivers/isdn/Kconfig"
-
 # input before char - char/joystick depends on it. As does USB.
 
 source "drivers/input/Kconfig"
drivers/isdn/Kconfig deleted +0 -27
deleted file mode 100644
index 6fd1b3f84a29..000000000000
@@ -1,27 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# ISDN device configuration
-#
-
-menuconfig ISDN
-	bool "ISDN support"
-	depends on NET && NETDEVICES
-	help
-	  ISDN ("Integrated Services Digital Network", called RNIS in France)
-	  is a fully digital telephone service that can be used for voice and
-	  data connections.  If your computer is equipped with an ISDN
-	  adapter you can use it to connect to your Internet service provider
-	  (with SLIP or PPP) faster than via a conventional telephone modem
-	  (though still much slower than with DSL) or to make and accept
-	  voice calls (eg. turning your PC into a software answering machine
-	  or PABX).
-
-	  Select this option if you want your kernel to support ISDN.
-
-if ISDN
-
-source "drivers/isdn/capi/Kconfig"
-
-source "drivers/isdn/mISDN/Kconfig"
-
-endif # ISDN
drivers/isdn/capi/Kconfig deleted +0 -32
deleted file mode 100644
index fdb43a632215..000000000000
@@ -1,32 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-config ISDN_CAPI
-	def_bool ISDN && BT
-	help
-	  This provides CAPI (the Common ISDN Application Programming
-	  Interface) Version 2.0, a standard making it easy for programs to
-	  access ISDN hardware in a device independent way. (For details see
-	  <https://www.capi.org/>.)  CAPI supports making and accepting voice
-	  and data connections, controlling call options and protocols,
-	  as well as ISDN supplementary services like call forwarding or
-	  three-party conferences (if supported by the specific hardware
-	  driver).
-
-	  This subsystem requires a hardware specific driver.
-	  See CONFIG_BT_CMTP for the last remaining regular driver
-	  in the kernel that uses the CAPI subsystem.
-
-config CAPI_TRACE
-	def_bool BT_CMTP
-	help
-	  If you say Y here, the kernelcapi driver can make verbose traces
-	  of CAPI messages. This feature can be enabled/disabled via IOCTL for
-	  every controller (default disabled).
-
-config ISDN_CAPI_MIDDLEWARE
-	def_bool BT_CMTP && TTY
-	help
-	  This option will enhance the capabilities of the /dev/capi20
-	  interface.  It will provide a means of moving a data connection,
-	  established via the usual /dev/capi20 interface to a special tty
-	  device.  If you want to use pppd with pppdcapiplugin to dial up to
-	  your ISP, say Y here.
drivers/isdn/hardware/mISDN/Kconfig deleted +0 -98

98 lines not on this page · raw message

drivers/isdn/mISDN/Kconfig deleted +0 -48

48 lines not on this page · raw message

net/bluetooth/Kconfig +0 -3
index 6b2b65a66700..ee6457d1a5ee 100644
@@ -33,7 +33,6 @@ menuconfig BT
 	     HCI Device drivers (Interface to the hardware)
 	     RFCOMM Module (RFCOMM Protocol)  
 	     BNEP Module (Bluetooth Network Encapsulation Protocol)
-	     CMTP Module (CAPI Message Transport Protocol)
 	     HIDP Module (Human Interface Device Protocol)
 
 	  Say Y here to compile Bluetooth support into the kernel or say M to
@@ -58,8 +57,6 @@ source "net/bluetooth/rfcomm/Kconfig"
 
 source "net/bluetooth/bnep/Kconfig"
 
-source "net/bluetooth/cmtp/Kconfig"
-
 source "net/bluetooth/hidp/Kconfig"
 
 config BT_LE
net/bluetooth/cmtp/Kconfig deleted +0 -12
deleted file mode 100644
index 34e923466236..000000000000
@@ -1,12 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-config BT_CMTP
-	tristate "CMTP protocol support (DEPRECATED)"
-	depends on BT_BREDR && ISDN_CAPI && DEPRECATED
-	help
-	  CMTP (CAPI Message Transport Protocol) is a transport layer
-	  for CAPI messages.  CMTP is required for the Bluetooth Common
-	  ISDN Access Profile.
-
-	  Say Y here to compile CMTP support into the kernel or say M to
-	  compile it as module (cmtp).
-
drivers/Makefile +0 -1
index c902fe94f6e8..cc5fdb1ef79f 100644
@@ -123,7 +123,6 @@ obj-$(CONFIG_WATCHDOG)		+= watchdog/
 obj-$(CONFIG_MD)		+= md/
 obj-$(CONFIG_BT)		+= bluetooth/
 obj-$(CONFIG_ACCESSIBILITY)	+= accessibility/
-obj-$(CONFIG_ISDN)		+= isdn/
 obj-$(CONFIG_EDAC)		+= edac/
 obj-$(CONFIG_EISA)		+= eisa/
 obj-$(CONFIG_PM_OPP)		+= opp/
drivers/isdn/Makefile deleted +0 -8
deleted file mode 100644
index d14334f4007e..000000000000
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-# Makefile for the kernel ISDN subsystem and device drivers.
-
-# Object files in subdirectories
-
-obj-$(CONFIG_BT_CMTP)			+= capi/
-obj-$(CONFIG_MISDN)			+= mISDN/
-obj-$(CONFIG_ISDN)			+= hardware/
drivers/isdn/capi/Makefile deleted +0 -6
deleted file mode 100644
index 4fd3a4d7133f..000000000000
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-# Makefile for the CAPI subsystem used by BT_CMTP
-
-obj-$(CONFIG_BT_CMTP)			+= kernelcapi.o
-kernelcapi-y				:= kcapi.o capiutil.o capi.o
-kernelcapi-$(CONFIG_PROC_FS)		+= kcapi_proc.o
drivers/isdn/hardware/Makefile deleted +0 -6
deleted file mode 100644
index 96f9eb2e46ba..000000000000
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-# Makefile for the CAPI hardware drivers
-
-# Object files in subdirectories
-
-obj-$(CONFIG_MISDN)		+= mISDN/
drivers/isdn/hardware/mISDN/Makefile deleted +0 -19
deleted file mode 100644
index 3f50f8c4753f..000000000000
@@ -1,19 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the modular ISDN hardware drivers
-#
-#
-
-obj-$(CONFIG_MISDN_HFCPCI) += hfcpci.o
-obj-$(CONFIG_MISDN_HFCMULTI) += hfcmulti.o
-obj-$(CONFIG_MISDN_HFCUSB) += hfcsusb.o
-obj-$(CONFIG_MISDN_AVMFRITZ) += avmfritz.o
-obj-$(CONFIG_MISDN_SPEEDFAX) += speedfax.o
-obj-$(CONFIG_MISDN_INFINEON) += mISDNinfineon.o
-obj-$(CONFIG_MISDN_W6692) += w6692.o
-obj-$(CONFIG_MISDN_NETJET) += netjet.o
-# chip modules
-obj-$(CONFIG_MISDN_IPAC) += mISDNipac.o
-obj-$(CONFIG_MISDN_ISAR) += mISDNisar.o
-
-obj-$(CONFIG_MISDN_HDLC) += isdnhdlc.o
drivers/isdn/mISDN/Makefile deleted +0 -14
deleted file mode 100644
index f3b4b7fa85f8..000000000000
@@ -1,14 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the modular ISDN driver
-#
-
-obj-$(CONFIG_MISDN) += mISDN_core.o
-obj-$(CONFIG_MISDN_DSP) += mISDN_dsp.o
-obj-$(CONFIG_MISDN_L1OIP) += l1oip.o
-
-# multi objects
-
-mISDN_core-objs := core.o fsm.o socket.o clock.o hwchannel.o stack.o layer1.o layer2.o tei.o timerdev.o
-mISDN_dsp-objs := dsp_core.o dsp_cmx.o dsp_tones.o dsp_dtmf.o dsp_audio.o dsp_blowfish.o dsp_pipeline.o dsp_hwec.o
-l1oip-objs := l1oip_core.o l1oip_codec.o
net/bluetooth/Makefile +0 -1
index a7eede7616d8..41049b280887 100644
@@ -6,7 +6,6 @@
 obj-$(CONFIG_BT)	+= bluetooth.o
 obj-$(CONFIG_BT_RFCOMM)	+= rfcomm/
 obj-$(CONFIG_BT_BNEP)	+= bnep/
-obj-$(CONFIG_BT_CMTP)	+= cmtp/
 obj-$(CONFIG_BT_HIDP)	+= hidp/
 obj-$(CONFIG_BT_6LOWPAN) += bluetooth_6lowpan.o
 
net/bluetooth/cmtp/Makefile deleted +0 -8
deleted file mode 100644
index b2262ca97499..000000000000
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for the Linux Bluetooth CMTP layer
-#
-
-obj-$(CONFIG_BT_CMTP) += cmtp.o
-
-cmtp-objs := core.o sock.o capi.o
drivers/isdn/capi/kcapi.h deleted +0 -182

182 lines not on this page · raw message

drivers/isdn/hardware/mISDN/hfc_multi.h deleted +0 -1236

1,236 lines not on this page · raw message

drivers/isdn/hardware/mISDN/hfc_multi_8xx.h deleted +0 -167

167 lines not on this page · raw message

drivers/isdn/hardware/mISDN/hfc_pci.h deleted +0 -214

214 lines not on this page · raw message

drivers/isdn/hardware/mISDN/hfcsusb.h deleted +0 -425

422 lines not on this page · raw message

drivers/isdn/hardware/mISDN/iohelper.h deleted +0 -96

96 lines not on this page · raw message

drivers/isdn/hardware/mISDN/ipac.h deleted +0 -393

393 lines not on this page · raw message

drivers/isdn/hardware/mISDN/isar.h deleted +0 -256

256 lines not on this page · raw message

drivers/isdn/hardware/mISDN/isdnhdlc.h deleted +0 -69

69 lines not on this page · raw message

drivers/isdn/hardware/mISDN/netjet.h deleted +0 -44

44 lines not on this page · raw message

drivers/isdn/hardware/mISDN/w6692.h deleted +0 -177

177 lines not on this page · raw message

drivers/isdn/mISDN/core.h deleted +0 -69

69 lines not on this page · raw message

drivers/isdn/mISDN/dsp.h deleted +0 -277

277 lines not on this page · raw message

drivers/isdn/mISDN/dsp_biquad.h deleted +0 -51

51 lines not on this page · raw message

drivers/isdn/mISDN/dsp_ecdis.h deleted +0 -96

96 lines not on this page · raw message

drivers/isdn/mISDN/dsp_hwec.h deleted +0 -10
deleted file mode 100644
index c9cb0ea249da..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/mISDN/fsm.h deleted +0 -58

58 lines not on this page · raw message

drivers/isdn/mISDN/l1oip.h deleted +0 -92

92 lines not on this page · raw message

drivers/isdn/mISDN/layer1.h deleted +0 -16
deleted file mode 100644
index f03e86450daf..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/mISDN/layer2.h deleted +0 -131

131 lines not on this page · raw message

include/linux/isdn/capilli.h deleted +0 -95

95 lines not on this page · raw message

include/linux/isdn/capiutil.h deleted +0 -60

60 lines not on this page · raw message

include/linux/kernelcapi.h deleted +0 -45

45 lines not on this page · raw message

include/linux/mISDNdsp.h deleted +0 -40
deleted file mode 100644
index 00758f45fddc..000000000000

Lines of this file are not shown. View the raw message.

include/linux/mISDNhw.h deleted +0 -192

192 lines not on this page · raw message

include/linux/mISDNif.h deleted +0 -603

603 lines not on this page · raw message

include/uapi/linux/capi.h deleted +0 -134

134 lines not on this page · raw message

include/uapi/linux/isdn/capicmd.h deleted +0 -117

117 lines not on this page · raw message

include/uapi/linux/kernelcapi.h deleted +0 -48

48 lines not on this page · raw message

net/bluetooth/cmtp/cmtp.h deleted +0 -129

129 lines not on this page · raw message

drivers/isdn/capi/capi.c deleted +0 -1435

1,435 lines not on this page · raw message

drivers/isdn/capi/capiutil.c deleted +0 -677

677 lines not on this page · raw message

drivers/isdn/capi/kcapi.c deleted +0 -933

933 lines not on this page · raw message

drivers/isdn/capi/kcapi_proc.c deleted +0 -231

231 lines not on this page · raw message

drivers/isdn/hardware/mISDN/avmfritz.c deleted +0 -1164

1,164 lines not on this page · raw message

drivers/isdn/hardware/mISDN/hfcmulti.c deleted +0 -5540

5,540 lines not on this page · raw message

drivers/isdn/hardware/mISDN/hfcpci.c deleted +0 -2360

2,360 lines not on this page · raw message

drivers/isdn/hardware/mISDN/hfcsusb.c deleted +0 -2157

2,157 lines not on this page · raw message

drivers/isdn/hardware/mISDN/isdnhdlc.c deleted +0 -617

617 lines not on this page · raw message

drivers/isdn/hardware/mISDN/mISDNinfineon.c deleted +0 -1168

1,168 lines not on this page · raw message

drivers/isdn/hardware/mISDN/mISDNipac.c deleted +0 -1636

1,636 lines not on this page · raw message

drivers/isdn/hardware/mISDN/mISDNisar.c deleted +0 -1694

1,694 lines not on this page · raw message

drivers/isdn/hardware/mISDN/netjet.c deleted +0 -1154

1,154 lines not on this page · raw message

drivers/isdn/hardware/mISDN/speedfax.c deleted +0 -520

520 lines not on this page · raw message

drivers/isdn/hardware/mISDN/w6692.c deleted +0 -1417

1,417 lines not on this page · raw message

drivers/isdn/mISDN/clock.c deleted +0 -197

197 lines not on this page · raw message

drivers/isdn/mISDN/core.c deleted +0 -400

400 lines not on this page · raw message

drivers/isdn/mISDN/dsp_audio.c deleted +0 -421

421 lines not on this page · raw message

drivers/isdn/mISDN/dsp_blowfish.c deleted +0 -667

667 lines not on this page · raw message

drivers/isdn/mISDN/dsp_cmx.c deleted +0 -1949

1,949 lines not on this page · raw message

drivers/isdn/mISDN/dsp_core.c deleted +0 -1227

1,227 lines not on this page · raw message

drivers/isdn/mISDN/dsp_dtmf.c deleted +0 -313

313 lines not on this page · raw message

drivers/isdn/mISDN/dsp_hwec.c deleted +0 -122

122 lines not on this page · raw message

drivers/isdn/mISDN/dsp_pipeline.c deleted +0 -300

300 lines not on this page · raw message

drivers/isdn/mISDN/dsp_tones.c deleted +0 -550

550 lines not on this page · raw message

drivers/isdn/mISDN/fsm.c deleted +0 -176

176 lines not on this page · raw message

drivers/isdn/mISDN/hwchannel.c deleted +0 -516

516 lines not on this page · raw message

drivers/isdn/mISDN/l1oip_codec.c deleted +0 -358

358 lines not on this page · raw message

drivers/isdn/mISDN/l1oip_core.c deleted +0 -1505

1,505 lines not on this page · raw message

drivers/isdn/mISDN/layer1.c deleted +0 -415

415 lines not on this page · raw message

drivers/isdn/mISDN/layer2.c deleted +0 -2266

2,266 lines not on this page · raw message

drivers/isdn/mISDN/socket.c deleted +0 -825

825 lines not on this page · raw message

drivers/isdn/mISDN/stack.c deleted +0 -654

654 lines not on this page · raw message

drivers/isdn/mISDN/tei.c deleted +0 -1416

1,416 lines not on this page · raw message

drivers/isdn/mISDN/timerdev.c deleted +0 -295

295 lines not on this page · raw message

net/bluetooth/cmtp/capi.c deleted +0 -579

579 lines not on this page · raw message

net/bluetooth/cmtp/core.c deleted +0 -519

519 lines not on this page · raw message

net/bluetooth/cmtp/sock.c deleted +0 -271

271 lines not on this page · raw message

CREDITS +5 -0
index a03b00452a1e..eeeece8ed868 100644

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

Signature · 1 line
2.53.0

Part of the diff is not shown here. View the raw message.

#1 lore raw

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=1083566

---Test result---

Test Summary:

CheckPatch                    PASS      13.02 seconds
GitLint                       PASS      0.47 seconds
SubjectPrefix                 FAIL      0.14 seconds
BuildKernel                   PASS      28.12 seconds
CheckAllWarning               PASS      30.38 seconds
CheckSparse                   PASS      29.18 seconds
BuildKernel32                 PASS      27.03 seconds
TestRunnerSetup               PASS      593.59 seconds
TestRunner_l2cap-tester       PASS      28.56 seconds
TestRunner_iso-tester         PASS      44.98 seconds
TestRunner_bnep-tester        PASS      6.62 seconds
TestRunner_mgmt-tester        FAIL      116.17 seconds
TestRunner_rfcomm-tester      PASS      9.66 seconds
TestRunner_sco-tester         PASS      14.67 seconds
TestRunner_ioctl-tester       PASS      10.62 seconds
TestRunner_mesh-tester        FAIL      12.27 seconds
TestRunner_smp-tester         PASS      8.89 seconds
TestRunner_userchan-tester    PASS      6.99 seconds
TestRunner_6lowpan-tester     FAIL      8.73 seconds
IncrementalBuild              PASS      27.11 seconds

Details
##############################
Test: SubjectPrefix - FAIL
Desc: Check subject contains "Bluetooth" prefix Output:
"Bluetooth: " prefix is not specified in the subject
##############################
Test: TestRunner_mgmt-tester - FAIL
Desc: Run mgmt-tester with test-runner Output:
Total: 494, Passed: 489 (99.0%), Failed: 1, Not Run: 4

Failed Test Cases
Read Exp Feature - Success Failed 0.115 seconds
##############################
Test: TestRunner_mesh-tester - FAIL
Desc: Run mesh-tester with test-runner Output:
Total: 10, Passed: 8 (80.0%), Failed: 2, Not Run: 0

Failed Test Cases

Mesh - Send cancel - 1                               Timed out    2.394 seconds
Mesh - Send cancel - 2                               Timed out    1.992 seconds

##############################
Test: TestRunner_6lowpan-tester - FAIL
Desc: Run 6lowpan-tester with test-runner
Output:
WARNING: possible circular locking dependency detected 7.0.0-rc7-g9259e7c11b57 #1 Not tainted
------------------------------------------------------
kworker/0:0/9 is trying to acquire lock:
ffff8880026d9940 ((wq_completion)hci0#2){+.+.}-{0:0}, at: touch_wq_lockdep_map+0x75/0x180

but task is already holding lock:
ffffffff9144f960 (rtnl_mutex){+.+.}-{4:4}, at: lowpan_unregister_netdev+0xd/0x30

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #4 (rtnl_mutex){+.+.}-{4:4}:

       lock_acquire+0xf7/0x2c0
       __mutex_lock+0x16b/0x1fc0
       lowpan_register_netdev+0x11/0x30
       chan_ready_cb+0x836/0xd00
       l2cap_recv_frame+0x61bb/0x88e0
       l2cap_recv_acldata+0x790/0xdf0
       hci_rx_work+0x500/0xd00
       process_scheduled_works+0xba7/0x1a90
       worker_thread+0x514/0xbb0
       kthread+0x368/0x490
       ret_from_fork+0x498/0x7e0
       ret_from_fork_asm+0x19/0x30

-> #3 (&chan->lock#3/1){+.+.}-{4:4}:

       lock_acquire+0xf7/0x2c0
       __mutex_lock+0x16b/0x1fc0
       l2cap_chan_connect+0x74e/0x1980
       lowpan_control_write+0x523/0x660
       full_proxy_write+0x10b/0x190
       vfs_write+0x1c0/0xf60
       ksys_write+0xf1/0x1d0
       do_syscall_64+0xa0/0x570
       entry_SYSCALL_64_after_hwframe+0x74/0x7c

-> #2 (&conn->lock){+.+.}-{4:4}:
...
Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0

https://github.com/bluez/bluetooth-next/pull/107

---
Regards,
Linux Bluetooth

Acked-by on v1 1/1
#2 lore raw
In reply to Jakub Kicinski
Quoted 13 lines · Jakub Kicinski

Remove the ISDN (mISDN, CAPI) subsystem and Bluetooth CMTP protocol from the kernel tree.

ISDN is a pretty old technology and it's unclear whether anyone still uses it. I went over the last few years of git history and all the commits are either tree-wide conversions or syzbot/static analyzer fixes.

When we discussed removal in the past IIRC there were some concerns about ISDN still being used in parts of Germany. Unfortunately, the code base is quite old, none of the current maintainers are familiar with it and AI tools will have a field day finding bugs here.

Quoted 8 lines

Delete this code and preserve it in an out-of-tree repository for any remaining users:
https://github.com/linux-netdev/mod-orphan

UAPI constants AF_ISDN/PF_ISDN and the SELinux isdn_socket class are preserved for ABI stability, but the rest of uAPI is removed.

Acked-by on v1 1/1
#3 lore raw
In reply to Jakub Kicinski
Quoted 17 lines · On Mon, 20 Apr 2026 19:21:07 -0700 Jakub Kicinski <[email protected]> wrote:

Remove the ISDN (mISDN, CAPI) subsystem and Bluetooth CMTP protocol from the kernel tree.

ISDN is a pretty old technology and it's unclear whether anyone still uses it. I went over the last few years of git history and all the commits are either tree-wide conversions or syzbot/static analyzer fixes.

When we discussed removal in the past IIRC there were some concerns about ISDN still being used in parts of Germany. Unfortunately, the code base is quite old, none of the current maintainers are familiar with it and AI tools will have a field day finding bugs here.

Delete this code and preserve it in an out-of-tree repository for any remaining users:
https://github.com/linux-netdev/mod-orphan

Quoted 5 lines

UAPI constants AF_ISDN/PF_ISDN and the SELinux isdn_socket class are preserved for ABI stability, but the rest of uAPI is removed.

---

Will remove it from iproute2-next as well

maintainer Acked-by on v1 1/1
#4 lore raw
In reply to Jakub Kicinski

Hi Jakub,

Quoted 45,711 lines · Jakub Kicinski

Remove the ISDN (mISDN, CAPI) subsystem and Bluetooth CMTP protocol from the kernel tree.

ISDN is a pretty old technology and it's unclear whether anyone still uses it. I went over the last few years of git history and all the commits are either tree-wide conversions or syzbot/static analyzer fixes.

When we discussed removal in the past IIRC there were some concerns about ISDN still being used in parts of Germany. Unfortunately, the code base is quite old, none of the current maintainers are familiar with it and AI tools will have a field day finding bugs here.

Delete this code and preserve it in an out-of-tree repository for any remaining users:
https://github.com/linux-netdev/mod-orphan

UAPI constants AF_ISDN/PF_ISDN and the SELinux isdn_socket class are preserved for ABI stability, but the rest of uAPI is removed.

---
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]

---
 MAINTAINERS                                 |   19 -
 Documentation/isdn/credits.rst              |   73 -
 Documentation/isdn/index.rst                |   14 -
 Documentation/isdn/interface_capi.rst       |  336 --
 Documentation/isdn/m_isdn.rst               |    9 -
 Documentation/subsystem-apis.rst            |    1 -
 drivers/Kconfig                             |    2 -
 drivers/isdn/Kconfig                        |   27 -
 drivers/isdn/capi/Kconfig                   |   32 -
 drivers/isdn/hardware/mISDN/Kconfig         |   98 -
 drivers/isdn/mISDN/Kconfig                  |   48 -
 net/bluetooth/Kconfig                       |    3 -
 net/bluetooth/cmtp/Kconfig                  |   12 -
 drivers/Makefile                            |    1 -
 drivers/isdn/Makefile                       |    8 -
 drivers/isdn/capi/Makefile                  |    6 -
 drivers/isdn/hardware/Makefile              |    6 -
 drivers/isdn/hardware/mISDN/Makefile        |   19 -
 drivers/isdn/mISDN/Makefile                 |   14 -
 net/bluetooth/Makefile                      |    1 -
 net/bluetooth/cmtp/Makefile                 |    8 -
 drivers/isdn/capi/kcapi.h                   |  182 -
 drivers/isdn/hardware/mISDN/hfc_multi.h     | 1236 -----
 drivers/isdn/hardware/mISDN/hfc_multi_8xx.h |  167 -
 drivers/isdn/hardware/mISDN/hfc_pci.h       |  214 -
 drivers/isdn/hardware/mISDN/hfcsusb.h       |  425 --
 drivers/isdn/hardware/mISDN/iohelper.h      |   96 -
 drivers/isdn/hardware/mISDN/ipac.h          |  393 --
 drivers/isdn/hardware/mISDN/isar.h          |  256 -
 drivers/isdn/hardware/mISDN/isdnhdlc.h      |   69 -
 drivers/isdn/hardware/mISDN/netjet.h        |   44 -
 drivers/isdn/hardware/mISDN/w6692.h         |  177 -
 drivers/isdn/mISDN/core.h                   |   69 -
 drivers/isdn/mISDN/dsp.h                    |  277 -
 drivers/isdn/mISDN/dsp_biquad.h             |   51 -
 drivers/isdn/mISDN/dsp_ecdis.h              |   96 -
 drivers/isdn/mISDN/dsp_hwec.h               |   10 -
 drivers/isdn/mISDN/fsm.h                    |   58 -
 drivers/isdn/mISDN/l1oip.h                  |   92 -
 drivers/isdn/mISDN/layer1.h                 |   16 -
 drivers/isdn/mISDN/layer2.h                 |  131 -
 include/linux/isdn/capilli.h                |   95 -
 include/linux/isdn/capiutil.h               |   60 -
 include/linux/kernelcapi.h                  |   45 -
 include/linux/mISDNdsp.h                    |   40 -
 include/linux/mISDNhw.h                     |  192 -
 include/linux/mISDNif.h                     |  603 --
 include/uapi/linux/capi.h                   |  134 -
 include/uapi/linux/isdn/capicmd.h           |  117 -
 include/uapi/linux/kernelcapi.h             |   48 -
 net/bluetooth/cmtp/cmtp.h                   |  129 -
 drivers/isdn/capi/capi.c                    | 1435 -----
 drivers/isdn/capi/capiutil.c                |  677 ---
 drivers/isdn/capi/kcapi.c                   |  933 ----
 drivers/isdn/capi/kcapi_proc.c              |  231 -
 drivers/isdn/hardware/mISDN/avmfritz.c      | 1164 ----
 drivers/isdn/hardware/mISDN/hfcmulti.c      | 5540 -------------------
 drivers/isdn/hardware/mISDN/hfcpci.c        | 2360 --------
 drivers/isdn/hardware/mISDN/hfcsusb.c       | 2157 --------
 drivers/isdn/hardware/mISDN/isdnhdlc.c      |  617 ---
 drivers/isdn/hardware/mISDN/mISDNinfineon.c | 1168 ----
 drivers/isdn/hardware/mISDN/mISDNipac.c     | 1636 ------
 drivers/isdn/hardware/mISDN/mISDNisar.c     | 1694 ------
 drivers/isdn/hardware/mISDN/netjet.c        | 1154 ----
 drivers/isdn/hardware/mISDN/speedfax.c      |  520 --
 drivers/isdn/hardware/mISDN/w6692.c         | 1417 -----
 drivers/isdn/mISDN/clock.c                  |  197 -
 drivers/isdn/mISDN/core.c                   |  400 --
 drivers/isdn/mISDN/dsp_audio.c              |  421 --
 drivers/isdn/mISDN/dsp_blowfish.c           |  667 ---
 drivers/isdn/mISDN/dsp_cmx.c                | 1949 -------
 drivers/isdn/mISDN/dsp_core.c               | 1227 ----
 drivers/isdn/mISDN/dsp_dtmf.c               |  313 --
 drivers/isdn/mISDN/dsp_hwec.c               |  122 -
 drivers/isdn/mISDN/dsp_pipeline.c           |  300 -
 drivers/isdn/mISDN/dsp_tones.c              |  550 --
 drivers/isdn/mISDN/fsm.c                    |  176 -
 drivers/isdn/mISDN/hwchannel.c              |  516 --
 drivers/isdn/mISDN/l1oip_codec.c            |  358 --
 drivers/isdn/mISDN/l1oip_core.c             | 1505 -----
 drivers/isdn/mISDN/layer1.c                 |  415 --
 drivers/isdn/mISDN/layer2.c                 | 2266 --------
 drivers/isdn/mISDN/socket.c                 |  825 ---
 drivers/isdn/mISDN/stack.c                  |  654 ---
 drivers/isdn/mISDN/tei.c                    | 1416 -----
 drivers/isdn/mISDN/timerdev.c               |  295 -
 net/bluetooth/cmtp/capi.c                   |  579 --
 net/bluetooth/cmtp/core.c                   |  519 --
 net/bluetooth/cmtp/sock.c                   |  271 -
 CREDITS                                     |    5 +
 90 files changed, 5 insertions(+), 44903 deletions(-)
 delete mode 100644 Documentation/isdn/credits.rst
 delete mode 100644 Documentation/isdn/index.rst
 delete mode 100644 Documentation/isdn/interface_capi.rst
 delete mode 100644 Documentation/isdn/m_isdn.rst
 delete mode 100644 drivers/isdn/Kconfig
 delete mode 100644 drivers/isdn/capi/Kconfig
 delete mode 100644 drivers/isdn/hardware/mISDN/Kconfig
 delete mode 100644 drivers/isdn/mISDN/Kconfig
 delete mode 100644 net/bluetooth/cmtp/Kconfig
 delete mode 100644 drivers/isdn/Makefile
 delete mode 100644 drivers/isdn/capi/Makefile
 delete mode 100644 drivers/isdn/hardware/Makefile
 delete mode 100644 drivers/isdn/hardware/mISDN/Makefile
 delete mode 100644 drivers/isdn/mISDN/Makefile
 delete mode 100644 net/bluetooth/cmtp/Makefile
 delete mode 100644 drivers/isdn/capi/kcapi.h
 delete mode 100644 drivers/isdn/hardware/mISDN/hfc_multi.h
 delete mode 100644 drivers/isdn/hardware/mISDN/hfc_multi_8xx.h
 delete mode 100644 drivers/isdn/hardware/mISDN/hfc_pci.h
 delete mode 100644 drivers/isdn/hardware/mISDN/hfcsusb.h
 delete mode 100644 drivers/isdn/hardware/mISDN/iohelper.h
 delete mode 100644 drivers/isdn/hardware/mISDN/ipac.h
 delete mode 100644 drivers/isdn/hardware/mISDN/isar.h
 delete mode 100644 drivers/isdn/hardware/mISDN/isdnhdlc.h
 delete mode 100644 drivers/isdn/hardware/mISDN/netjet.h
 delete mode 100644 drivers/isdn/hardware/mISDN/w6692.h
 delete mode 100644 drivers/isdn/mISDN/core.h
 delete mode 100644 drivers/isdn/mISDN/dsp.h
 delete mode 100644 drivers/isdn/mISDN/dsp_biquad.h
 delete mode 100644 drivers/isdn/mISDN/dsp_ecdis.h
 delete mode 100644 drivers/isdn/mISDN/dsp_hwec.h
 delete mode 100644 drivers/isdn/mISDN/fsm.h
 delete mode 100644 drivers/isdn/mISDN/l1oip.h
 delete mode 100644 drivers/isdn/mISDN/layer1.h
 delete mode 100644 drivers/isdn/mISDN/layer2.h
 delete mode 100644 include/linux/isdn/capilli.h
 delete mode 100644 include/linux/isdn/capiutil.h
 delete mode 100644 include/linux/kernelcapi.h
 delete mode 100644 include/linux/mISDNdsp.h
 delete mode 100644 include/linux/mISDNhw.h
 delete mode 100644 include/linux/mISDNif.h
 delete mode 100644 include/uapi/linux/capi.h
 delete mode 100644 include/uapi/linux/isdn/capicmd.h
 delete mode 100644 include/uapi/linux/kernelcapi.h
 delete mode 100644 net/bluetooth/cmtp/cmtp.h
 delete mode 100644 drivers/isdn/capi/capi.c
 delete mode 100644 drivers/isdn/capi/capiutil.c
 delete mode 100644 drivers/isdn/capi/kcapi.c
 delete mode 100644 drivers/isdn/capi/kcapi_proc.c
 delete mode 100644 drivers/isdn/hardware/mISDN/avmfritz.c
 delete mode 100644 drivers/isdn/hardware/mISDN/hfcmulti.c
 delete mode 100644 drivers/isdn/hardware/mISDN/hfcpci.c
 delete mode 100644 drivers/isdn/hardware/mISDN/hfcsusb.c
 delete mode 100644 drivers/isdn/hardware/mISDN/isdnhdlc.c
 delete mode 100644 drivers/isdn/hardware/mISDN/mISDNinfineon.c
 delete mode 100644 drivers/isdn/hardware/mISDN/mISDNipac.c
 delete mode 100644 drivers/isdn/hardware/mISDN/mISDNisar.c
 delete mode 100644 drivers/isdn/hardware/mISDN/netjet.c
 delete mode 100644 drivers/isdn/hardware/mISDN/speedfax.c
 delete mode 100644 drivers/isdn/hardware/mISDN/w6692.c
 delete mode 100644 drivers/isdn/mISDN/clock.c
 delete mode 100644 drivers/isdn/mISDN/core.c
 delete mode 100644 drivers/isdn/mISDN/dsp_audio.c
 delete mode 100644 drivers/isdn/mISDN/dsp_blowfish.c
 delete mode 100644 drivers/isdn/mISDN/dsp_cmx.c
 delete mode 100644 drivers/isdn/mISDN/dsp_core.c
 delete mode 100644 drivers/isdn/mISDN/dsp_dtmf.c
 delete mode 100644 drivers/isdn/mISDN/dsp_hwec.c
 delete mode 100644 drivers/isdn/mISDN/dsp_pipeline.c
 delete mode 100644 drivers/isdn/mISDN/dsp_tones.c
 delete mode 100644 drivers/isdn/mISDN/fsm.c
 delete mode 100644 drivers/isdn/mISDN/hwchannel.c
 delete mode 100644 drivers/isdn/mISDN/l1oip_codec.c
 delete mode 100644 drivers/isdn/mISDN/l1oip_core.c
 delete mode 100644 drivers/isdn/mISDN/layer1.c
 delete mode 100644 drivers/isdn/mISDN/layer2.c
 delete mode 100644 drivers/isdn/mISDN/socket.c
 delete mode 100644 drivers/isdn/mISDN/stack.c
 delete mode 100644 drivers/isdn/mISDN/tei.c
 delete mode 100644 drivers/isdn/mISDN/timerdev.c
 delete mode 100644 net/bluetooth/cmtp/capi.c
 delete mode 100644 net/bluetooth/cmtp/core.c
 delete mode 100644 net/bluetooth/cmtp/sock.c
MAINTAINERS +0 -19
index 6eb1a3ec60f1..cfcf422dd40a 100644
@@ -13560,25 +13560,6 @@ S:     Supported
 T:     git git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending.git master
 F:     drivers/infiniband/ulp/isert
 
-ISDN/CMTP OVER BLUETOOTH
-L:     [email protected]
-S:     Orphan
-W:     http://www.isdn4linux.de
-F:     Documentation/isdn/
-F:     drivers/isdn/capi/
-F:     include/linux/isdn/
-F:     include/uapi/linux/isdn/
-F:     net/bluetooth/cmtp/
-
-ISDN/mISDN SUBSYSTEM
-L:     [email protected]
-S:     Orphan
-W:     http://www.isdn4linux.de
-F:     drivers/isdn/Kconfig
-F:     drivers/isdn/Makefile
-F:     drivers/isdn/hardware/
-F:     drivers/isdn/mISDN/
-
 ISL28022 HARDWARE MONITORING DRIVER
 M:     Carsten Spieß <[email protected]>
 L:     [email protected]
Documentation/isdn/credits.rst deleted +0 -73
deleted file mode 100644
index 319323f2091f..000000000000
@@ -1,73 +0,0 @@
-=======
-Credits
-=======
-
-
-I want to thank all who contributed to this project and especially to:
-(in alphabetical order)
-
-Thomas Bogendörfer ([email protected])
-  Tester, lots of bugfixes and hints.
-
-Alan Cox ([email protected])
-  For help getting into standard-kernel.
-
-Henner Eisen ([email protected])
-  For X.25 implementation.
-
-Volker Götz ([email protected])
-  For contribution of man-pages, the imontty-tool and a perfect
-  maintaining of the mailing-list at hub-wue.
-
-Matthias Hessler ([email protected])
-  For creating and maintaining the FAQ.
-
-Bernhard Hailer ([email protected])
-  For creating the FAQ, and the leafsite HOWTO.
-
-Michael 'Ghandi' Herold ([email protected])
-  For contribution of the vbox answering machine.
-
-Michael Hipp ([email protected])
-  For his Sync-PPP-code.
-
-Karsten Keil ([email protected])
-  For adding 1TR6-support to the Teles-driver.
-  For the HiSax-driver.
-
-Michael Knigge ([email protected])
-  For contributing the imon-tool
-
-Andreas Kool ([email protected])
-  For contribution of the isdnlog/isdnrep-tool
-
-Pedro Roque Marques ([email protected])
-  For lot of new ideas and the pcbit driver.
-
-Eberhard Mönkeberg ([email protected])
-  For testing and help to get into kernel.
-
-Thomas Neumann ([email protected])
-  For help with Cisco-SLARP and keepalive
-
-Jan den Ouden ([email protected])
-  For contribution of the original teles-driver
-
-Carsten Paeth ([email protected])
-  For the AVM-B1-CAPI2.0 driver
-
-Thomas Pfeiffer ([email protected])
-  For V.110, extended T.70 and Hylafax extensions in isdn_tty.c
-
-Max Riegel ([email protected])
-  For making the ICN hardware-documentation and test-equipment available.
-
-Armin Schindler ([email protected])
-  For the eicon active card driver.
-
-Gerhard 'Fido' Schneider ([email protected])
-  For heavy-duty-beta-testing with his BBS ;)
-
-Thomas Uhl ([email protected])
-  For distributing the cards.
-  For pushing me to work ;-)
Documentation/isdn/index.rst deleted +0 -14
deleted file mode 100644
index d1125a16a746..000000000000
@@ -1,14 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-====
-ISDN
-====
-
-.. toctree::
-   :maxdepth: 2
-
-   interface_capi
-
-   m_isdn
-
-   credits
Documentation/isdn/interface_capi.rst deleted +0 -336
deleted file mode 100644
index 4d63b34b35cf..000000000000
@@ -1,336 +0,0 @@
-=========================================
-Kernel CAPI Interface to Hardware Drivers
-=========================================
-
-1. Overview
-===========
-
-From the CAPI 2.0 specification:
-COMMON-ISDN-API (CAPI) is an application programming interface standard used
-to access ISDN equipment connected to basic rate interfaces (BRI) and primary
-rate interfaces (PRI).
-
-Kernel CAPI operates as a dispatching layer between CAPI applications and CAPI
-hardware drivers. Hardware drivers register ISDN devices (controllers, in CAPI
-lingo) with Kernel CAPI to indicate their readiness to provide their service
-to CAPI applications. CAPI applications also register with Kernel CAPI,
-requesting association with a CAPI device. Kernel CAPI then dispatches the
-application registration to an available device, forwarding it to the
-corresponding hardware driver. Kernel CAPI then forwards CAPI messages in both
-directions between the application and the hardware driver.
-
-Format and semantics of CAPI messages are specified in the CAPI 2.0 standard.
-This standard is freely available from https://www.capi.org.
-
-
-2. Driver and Device Registration
-=================================
-
-CAPI drivers must register each of the ISDN devices they control with Kernel
-CAPI by calling the Kernel CAPI function attach_capi_ctr() with a pointer to a
-struct capi_ctr before they can be used. This structure must be filled with
-the names of the driver and controller, and a number of callback function
-pointers which are subsequently used by Kernel CAPI for communicating with the
-driver. The registration can be revoked by calling the function
-detach_capi_ctr() with a pointer to the same struct capi_ctr.
-
-Before the device can be actually used, the driver must fill in the device
-information fields 'manu', 'version', 'profile' and 'serial' in the capi_ctr
-structure of the device, and signal its readiness by calling capi_ctr_ready().
-From then on, Kernel CAPI may call the registered callback functions for the
-device.
-
-If the device becomes unusable for any reason (shutdown, disconnect ...), the
-driver has to call capi_ctr_down(). This will prevent further calls to the
-callback functions by Kernel CAPI.
-
-
-3. Application Registration and Communication
-=============================================
-
-Kernel CAPI forwards registration requests from applications (calls to CAPI
-operation CAPI_REGISTER) to an appropriate hardware driver by calling its
-register_appl() callback function. A unique Application ID (ApplID, u16) is
-allocated by Kernel CAPI and passed to register_appl() along with the
-parameter structure provided by the application. This is analogous to the
-open() operation on regular files or character devices.
-
-After a successful return from register_appl(), CAPI messages from the
-application may be passed to the driver for the device via calls to the
-send_message() callback function. Conversely, the driver may call Kernel
-CAPI's capi_ctr_handle_message() function to pass a received CAPI message to
-Kernel CAPI for forwarding to an application, specifying its ApplID.
-
-Deregistration requests (CAPI operation CAPI_RELEASE) from applications are
-forwarded as calls to the release_appl() callback function, passing the same
-ApplID as with register_appl(). After return from release_appl(), no CAPI
-messages for that application may be passed to or from the device anymore.
-
-
-4. Data Structures
-==================
-
-4.1 struct capi_driver
-----------------------
-
-This structure describes a Kernel CAPI driver itself. It is used in the
-register_capi_driver() and unregister_capi_driver() functions, and contains
-the following non-private fields, all to be set by the driver before calling
-register_capi_driver():
-
-``char name[32]``
-       the name of the driver, as a zero-terminated ASCII string
-``char revision[32]``
-       the revision number of the driver, as a zero-terminated ASCII string
-
-4.2 struct capi_ctr
--------------------
-
-This structure describes an ISDN device (controller) handled by a Kernel CAPI
-driver. After registration via the attach_capi_ctr() function it is passed to
-all controller specific lower layer interface and callback functions to
-identify the controller to operate on.
-
-It contains the following non-private fields:
-
-to be set by the driver before calling attach_capi_ctr():
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-``struct module *owner``
-       pointer to the driver module owning the device
-
-``void *driverdata``
-       an opaque pointer to driver specific data, not touched by Kernel CAPI
-
-``char name[32]``
-       the name of the controller, as a zero-terminated ASCII string
-
-``char *driver_name``
-       the name of the driver, as a zero-terminated ASCII string
-
-``int (*load_firmware)(struct capi_ctr *ctrlr, capiloaddata *ldata)``
-       (optional) pointer to a callback function for sending firmware and
-       configuration data to the device
-
-       The function may return before the operation has completed.
-
-       Completion must be signalled by a call to capi_ctr_ready().
-
-       Return value: 0 on success, error code on error
-       Called in process context.
-
-``void (*reset_ctr)(struct capi_ctr *ctrlr)``
-       (optional) pointer to a callback function for stopping the device,
-       releasing all registered applications
-
-       The function may return before the operation has completed.
-
-       Completion must be signalled by a call to capi_ctr_down().
-
-       Called in process context.
-
-``void (*register_appl)(struct capi_ctr *ctrlr, u16 applid, capi_register_params *rparam)``
-       pointers to callback function for registration of
-       applications with the device
-
-       Calls to these functions are serialized by Kernel CAPI so that only
-       one call to any of them is active at any time.
-
-``void (*release_appl)(struct capi_ctr *ctrlr, u16 applid)``
-       pointers to callback functions deregistration of
-       applications with the device
-
-       Calls to these functions are serialized by Kernel CAPI so that only
-       one call to any of them is active at any time.
-
-``u16  (*send_message)(struct capi_ctr *ctrlr, struct sk_buff *skb)``
-       pointer to a callback function for sending a CAPI message to the
-       device
-
-       Return value: CAPI error code
-
-       If the method returns 0 (CAPI_NOERROR) the driver has taken ownership
-       of the skb and the caller may no longer access it. If it returns a
-       non-zero (error) value then ownership of the skb returns to the caller
-       who may reuse or free it.
-
-       The return value should only be used to signal problems with respect
-       to accepting or queueing the message. Errors occurring during the
-       actual processing of the message should be signaled with an
-       appropriate reply message.
-
-       May be called in process or interrupt context.
-
-       Calls to this function are not serialized by Kernel CAPI, ie. it must
-       be prepared to be re-entered.
-
-``char *(*procinfo)(struct capi_ctr *ctrlr)``
-       pointer to a callback function returning the entry for the device in
-       the CAPI controller info table, /proc/capi/controller
-
-Note:
-  Callback functions except send_message() are never called in interrupt
-  context.
-
-to be filled in before calling capi_ctr_ready():
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-``u8 manu[CAPI_MANUFACTURER_LEN]``
-       value to return for CAPI_GET_MANUFACTURER
-
-``capi_version version``
-       value to return for CAPI_GET_VERSION
-
-``capi_profile profile``
-       value to return for CAPI_GET_PROFILE
-
-``u8 serial[CAPI_SERIAL_LEN]``
-       value to return for CAPI_GET_SERIAL
-
-
-4.3 SKBs
---------
-
-CAPI messages are passed between Kernel CAPI and the driver via send_message()
-and capi_ctr_handle_message(), stored in the data portion of a socket buffer
-(skb).  Each skb contains a single CAPI message coded according to the CAPI 2.0
-standard.
-
-For the data transfer messages, DATA_B3_REQ and DATA_B3_IND, the actual
-payload data immediately follows the CAPI message itself within the same skb.
-The Data and Data64 parameters are not used for processing. The Data64
-parameter may be omitted by setting the length field of the CAPI message to 22
-instead of 30.
-
-
-4.4 The _cmsg Structure
------------------------
-
-(declared in <linux/isdn/capiutil.h>)
-
-The _cmsg structure stores the contents of a CAPI 2.0 message in an easily
-accessible form. It contains members for all possible CAPI 2.0 parameters,
-including subparameters of the Additional Info and B Protocol structured
-parameters, with the following exceptions:
-
-* second Calling party number (CONNECT_IND)
-
-* Data64 (DATA_B3_REQ and DATA_B3_IND)
-
-* Sending complete (subparameter of Additional Info, CONNECT_REQ and INFO_REQ)
-
-* Global Configuration (subparameter of B Protocol, CONNECT_REQ, CONNECT_RESP
-  and SELECT_B_PROTOCOL_REQ)
-
-Only those parameters appearing in the message type currently being processed
-are actually used. Unused members should be set to zero.
-
-Members are named after the CAPI 2.0 standard names of the parameters they
-represent. See <linux/isdn/capiutil.h> for the exact spelling. Member data
-types are:
-
-=========== =================================================================
-u8          for CAPI parameters of type 'byte'
-
-u16         for CAPI parameters of type 'word'
-
-u32         for CAPI parameters of type 'dword'
-
-_cstruct    for CAPI parameters of type 'struct'
-           The member is a pointer to a buffer containing the parameter in
-           CAPI encoding (length + content). It may also be NULL, which will
-           be taken to represent an empty (zero length) parameter.
-           Subparameters are stored in encoded form within the content part.
-
-_cmstruct   alternative representation for CAPI parameters of type 'struct'
-           (used only for the 'Additional Info' and 'B Protocol' parameters)
-           The representation is a single byte containing one of the values:
-           CAPI_DEFAULT: The parameter is empty/absent.
-           CAPI_COMPOSE: The parameter is present.
-           Subparameter values are stored individually in the corresponding
-           _cmsg structure members.
-=========== =================================================================
-
-
-5. Lower Layer Interface Functions
-==================================
-
-::
-
-  int attach_capi_ctr(struct capi_ctr *ctrlr)
-  int detach_capi_ctr(struct capi_ctr *ctrlr)
-
-register/unregister a device (controller) with Kernel CAPI
-
-::
-
-  void capi_ctr_ready(struct capi_ctr *ctrlr)
-  void capi_ctr_down(struct capi_ctr *ctrlr)
-
-signal controller ready/not ready
-
-::
-
-  void capi_ctr_handle_message(struct capi_ctr * ctrlr, u16 applid,
-                              struct sk_buff *skb)
-
-pass a received CAPI message to Kernel CAPI
-for forwarding to the specified application
-
-
-6. Helper Functions and Macros
-==============================
-
-Macros to extract/set element values from/in a CAPI message header
-(from <linux/isdn/capiutil.h>):
-
-======================  =============================   ====================
-Get Macro              Set Macro                       Element (Type)
-======================  =============================   ====================
-CAPIMSG_LEN(m)         CAPIMSG_SETLEN(m, len)          Total Length (u16)
-CAPIMSG_APPID(m)       CAPIMSG_SETAPPID(m, applid)     ApplID (u16)
-CAPIMSG_COMMAND(m)     CAPIMSG_SETCOMMAND(m,cmd)       Command (u8)
-CAPIMSG_SUBCOMMAND(m)  CAPIMSG_SETSUBCOMMAND(m, cmd)   Subcommand (u8)
-CAPIMSG_CMD(m)         -                               Command*256
-                                                       + Subcommand (u16)
-CAPIMSG_MSGID(m)       CAPIMSG_SETMSGID(m, msgid)      Message Number (u16)
-
-CAPIMSG_CONTROL(m)     CAPIMSG_SETCONTROL(m, contr)    Controller/PLCI/NCCI
-                                                       (u32)
-CAPIMSG_DATALEN(m)     CAPIMSG_SETDATALEN(m, len)      Data Length (u16)
-======================  =============================   ====================
-
-
-Library functions for working with _cmsg structures
-(from <linux/isdn/capiutil.h>):
-
-``char *capi_cmd2str(u8 Command, u8 Subcommand)``
-       Returns the CAPI 2.0 message name corresponding to the given command
-       and subcommand values, as a static ASCII string. The return value may
-       be NULL if the command/subcommand is not one of those defined in the
-       CAPI 2.0 standard.
-
-
-7. Debugging
-============
-
-The module kernelcapi has a module parameter showcapimsgs controlling some
-debugging output produced by the module. It can only be set when the module is
-loaded, via a parameter "showcapimsgs=<n>" to the modprobe command, either on
-the command line or in the configuration file.
-
-If the lowest bit of showcapimsgs is set, kernelcapi logs controller and
-application up and down events.
-
-In addition, every registered CAPI controller has an associated traceflag
-parameter controlling how CAPI messages sent from and to the controller are
-logged. The traceflag parameter is initialized with the value of the
-showcapimsgs parameter when the controller is registered, but can later be
-changed via the MANUFACTURER_REQ command KCAPI_CMD_TRACE.
-
-If the value of traceflag is non-zero, CAPI messages are logged.
-DATA_B3 messages are only logged if the value of traceflag is > 2.
-
-If the lowest bit of traceflag is set, only the command/subcommand and message
-length are logged. Otherwise, kernelcapi logs a readable representation of
-the entire message.
Documentation/isdn/m_isdn.rst deleted +0 -9
deleted file mode 100644
index 5847a164287e..000000000000
@@ -1,9 +0,0 @@
-============
-mISDN Driver
-============
-
-mISDN is a new modular ISDN driver, in the long term it should replace
-the old I4L driver architecture for passive ISDN cards.
-It was designed to allow a broad range of applications and interfaces
-but only have the basic function in kernel, the interface to the user
-space is based on sockets with a own address family AF_ISDN.
Documentation/subsystem-apis.rst +0 -1
index ff4fe8c936c8..b1ad48bb4001 100644
@@ -46,7 +46,6 @@ Networking interfaces
    networking/index
    netlabel/index
    infiniband/index
-   isdn/index
    mhi/index
 
 Storage interfaces
drivers/Kconfig +0 -2
index c0f1fb893ec0..f2bed2ddeb66 100644
@@ -61,8 +61,6 @@ source "drivers/macintosh/Kconfig"
 
 source "drivers/net/Kconfig"
 
-source "drivers/isdn/Kconfig"
-
 # input before char - char/joystick depends on it. As does USB.
 
 source "drivers/input/Kconfig"
drivers/isdn/Kconfig deleted +0 -27
deleted file mode 100644
index 6fd1b3f84a29..000000000000
@@ -1,27 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# ISDN device configuration
-#
-
-menuconfig ISDN
-       bool "ISDN support"
-       depends on NET && NETDEVICES
-       help
-         ISDN ("Integrated Services Digital Network", called RNIS in France)
-         is a fully digital telephone service that can be used for voice and
-         data connections.  If your computer is equipped with an ISDN
-         adapter you can use it to connect to your Internet service provider
-         (with SLIP or PPP) faster than via a conventional telephone modem
-         (though still much slower than with DSL) or to make and accept
-         voice calls (eg. turning your PC into a software answering machine
-         or PABX).
-
-         Select this option if you want your kernel to support ISDN.
-
-if ISDN
-
-source "drivers/isdn/capi/Kconfig"
-
-source "drivers/isdn/mISDN/Kconfig"
-
-endif # ISDN
drivers/isdn/capi/Kconfig deleted +0 -32
deleted file mode 100644
index fdb43a632215..000000000000
@@ -1,32 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-config ISDN_CAPI
-       def_bool ISDN && BT
-       help
-         This provides CAPI (the Common ISDN Application Programming
-         Interface) Version 2.0, a standard making it easy for programs to
-         access ISDN hardware in a device independent way. (For details see
-         <https://www.capi.org/>.)  CAPI supports making and accepting voice
-         and data connections, controlling call options and protocols,
-         as well as ISDN supplementary services like call forwarding or
-         three-party conferences (if supported by the specific hardware
-         driver).
-
-         This subsystem requires a hardware specific driver.
-         See CONFIG_BT_CMTP for the last remaining regular driver
-         in the kernel that uses the CAPI subsystem.
-
-config CAPI_TRACE
-       def_bool BT_CMTP
-       help
-         If you say Y here, the kernelcapi driver can make verbose traces
-         of CAPI messages. This feature can be enabled/disabled via IOCTL for
-         every controller (default disabled).
-
-config ISDN_CAPI_MIDDLEWARE
-       def_bool BT_CMTP && TTY
-       help
-         This option will enhance the capabilities of the /dev/capi20
-         interface.  It will provide a means of moving a data connection,
-         established via the usual /dev/capi20 interface to a special tty
-         device.  If you want to use pppd with pppdcapiplugin to dial up to
-         your ISP, say Y here.
drivers/isdn/hardware/mISDN/Kconfig deleted +0 -98
deleted file mode 100644
index a35bff8a93f5..000000000000
@@ -1,98 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Hardware for mISDN
-#
-comment "mISDN hardware drivers"
-
-config MISDN_HFCPCI
-       tristate "Support for HFC PCI cards"
-       depends on MISDN
-       depends on PCI
-       help
-         Enable support for cards with Cologne Chip AG's
-         HFC PCI chip.
-
-config MISDN_HFCMULTI
-       tristate "Support for HFC multiport cards (HFC-4S/8S/E1)"
-       depends on (PCI || CPM1) && HAS_IOPORT
-       depends on MISDN
-       help
-         Enable support for cards with Cologne Chip AG's HFC multiport
-         chip. There are three types of chips that are quite similar,
-         but the interface is different:
-          * HFC-4S (4 S/T interfaces on one chip)
-          * HFC-8S (8 S/T interfaces on one chip)
-          * HFC-E1 (E1 interface for 2Mbit ISDN)
-
-config MISDN_HFCMULTI_8xx
-       bool "Support for XHFC embedded board in HFC multiport driver"
-       depends on MISDN
-       depends on MISDN_HFCMULTI
-       depends on CPM1
-       default CPM1
-       help
-         Enable support for the XHFC embedded solution from Speech Design.
-
-config MISDN_HFCUSB
-       tristate "Support for HFC-S USB based TAs"
-       depends on USB
-       help
-         Enable support for USB ISDN TAs with Cologne Chip AG's
-         HFC-S USB ISDN Controller
-
-config MISDN_AVMFRITZ
-       tristate "Support for AVM FRITZ!CARD PCI"
-       depends on MISDN
-       depends on PCI && HAS_IOPORT
-       select MISDN_IPAC
-       help
-         Enable support for AVMs FRITZ!CARD PCI cards
-
-config MISDN_SPEEDFAX
-       tristate "Support for Sedlbauer Speedfax+"
-       depends on MISDN
-       depends on PCI && HAS_IOPORT
-       select MISDN_IPAC
-       select MISDN_ISAR
-       help
-         Enable support for Sedlbauer Speedfax+.
-
-config MISDN_INFINEON
-       tristate "Support for cards with Infineon chipset"
-       depends on MISDN
-       depends on PCI && HAS_IOPORT
-       select MISDN_IPAC
-       help
-         Enable support for cards with ISAC + HSCX, IPAC or IPAC-SX
-         chip from Infineon (former manufacturer Siemens).
-
-config MISDN_W6692
-       tristate "Support for cards with Winbond 6692"
-       depends on MISDN
-       depends on PCI && HAS_IOPORT
-       help
-         Enable support for Winbond 6692 PCI chip based cards.
-
-config MISDN_NETJET
-       tristate "Support for NETJet cards"
-       depends on MISDN
-       depends on PCI && HAS_IOPORT
-       depends on TTY
-       select MISDN_IPAC
-       select MISDN_HDLC
-       help
-         Enable support for Traverse Technologies NETJet PCI cards.
-
-config MISDN_HDLC
-       tristate
-       select CRC_CCITT
-       select BITREVERSE
-
-config MISDN_IPAC
-       tristate
-       depends on MISDN
-
-config MISDN_ISAR
-       tristate
-       depends on MISDN
-
drivers/isdn/mISDN/Kconfig deleted +0 -48
deleted file mode 100644
index c9a53c222472..000000000000
@@ -1,48 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# modularer ISDN driver
-#
-
-menuconfig MISDN
-       tristate "Modular ISDN driver"
-       help
-         Enable support for the modular ISDN driver.
-
-if MISDN != n
-
-config MISDN_DSP
-       tristate "Digital Audio Processing of transparent data"
-       depends on MISDN
-       select BITREVERSE
-       help
-         Enable support for digital audio processing capability.
-
-         This module may be used for special applications that require
-         cross connecting of bchannels, conferencing, dtmf decoding,
-         echo cancellation, tone generation, and Blowfish encryption and
-         decryption. It may use hardware features if available.
-
-         E.g. it is required for PBX4Linux. Go to http://isdn.eversberg.eu
-         and get more information about this module and its usage.
-
-         If unsure, say 'N'.
-
-config MISDN_L1OIP
-       tristate "ISDN over IP tunnel"
-       depends on MISDN
-       help
-         Enable support for ISDN over IP tunnel.
-
-         It features:
-           - dynamic IP exchange, if one or both peers have dynamic IPs
-           - BRI (S0) and PRI (S2M) interface
-           - layer 1 control via network keepalive frames
-           - direct tunneling of physical interface via IP
-
-         NOTE: This protocol is called 'Layer 1 over IP' and is not
-         compatible with ISDNoIP (Agfeo) or TDMoIP. Protocol description is
-         provided in the source code.
-
-source "drivers/isdn/hardware/mISDN/Kconfig"
-
-endif #MISDN
net/bluetooth/Kconfig +0 -3
index 6b2b65a66700..ee6457d1a5ee 100644
@@ -33,7 +33,6 @@ menuconfig BT
             HCI Device drivers (Interface to the hardware)
             RFCOMM Module (RFCOMM Protocol)
             BNEP Module (Bluetooth Network Encapsulation Protocol)
-            CMTP Module (CAPI Message Transport Protocol)
             HIDP Module (Human Interface Device Protocol)
 
          Say Y here to compile Bluetooth support into the kernel or say M to
@@ -58,8 +57,6 @@ source "net/bluetooth/rfcomm/Kconfig"
 
 source "net/bluetooth/bnep/Kconfig"
 
-source "net/bluetooth/cmtp/Kconfig"
-
 source "net/bluetooth/hidp/Kconfig"
 
 config BT_LE
net/bluetooth/cmtp/Kconfig deleted +0 -12
deleted file mode 100644
index 34e923466236..000000000000
@@ -1,12 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-config BT_CMTP
-       tristate "CMTP protocol support (DEPRECATED)"
-       depends on BT_BREDR && ISDN_CAPI && DEPRECATED
-       help
-         CMTP (CAPI Message Transport Protocol) is a transport layer
-         for CAPI messages.  CMTP is required for the Bluetooth Common
-         ISDN Access Profile.
-
-         Say Y here to compile CMTP support into the kernel or say M to
-         compile it as module (cmtp).
-
drivers/Makefile +0 -1
index c902fe94f6e8..cc5fdb1ef79f 100644
@@ -123,7 +123,6 @@ obj-$(CONFIG_WATCHDOG)              += watchdog/
 obj-$(CONFIG_MD)               += md/
 obj-$(CONFIG_BT)               += bluetooth/
 obj-$(CONFIG_ACCESSIBILITY)    += accessibility/
-obj-$(CONFIG_ISDN)             += isdn/
 obj-$(CONFIG_EDAC)             += edac/
 obj-$(CONFIG_EISA)             += eisa/
 obj-$(CONFIG_PM_OPP)           += opp/
drivers/isdn/Makefile deleted +0 -8
deleted file mode 100644
index d14334f4007e..000000000000
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-# Makefile for the kernel ISDN subsystem and device drivers.
-
-# Object files in subdirectories
-
-obj-$(CONFIG_BT_CMTP)                  += capi/
-obj-$(CONFIG_MISDN)                    += mISDN/
-obj-$(CONFIG_ISDN)                     += hardware/
drivers/isdn/capi/Makefile deleted +0 -6
deleted file mode 100644
index 4fd3a4d7133f..000000000000
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-# Makefile for the CAPI subsystem used by BT_CMTP
-
-obj-$(CONFIG_BT_CMTP)                  += kernelcapi.o
-kernelcapi-y                           := kcapi.o capiutil.o capi.o
-kernelcapi-$(CONFIG_PROC_FS)           += kcapi_proc.o
drivers/isdn/hardware/Makefile deleted +0 -6
deleted file mode 100644
index 96f9eb2e46ba..000000000000
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-# Makefile for the CAPI hardware drivers
-
-# Object files in subdirectories
-
-obj-$(CONFIG_MISDN)            += mISDN/
drivers/isdn/hardware/mISDN/Makefile deleted +0 -19
deleted file mode 100644
index 3f50f8c4753f..000000000000
@@ -1,19 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the modular ISDN hardware drivers
-#
-#
-
-obj-$(CONFIG_MISDN_HFCPCI) += hfcpci.o
-obj-$(CONFIG_MISDN_HFCMULTI) += hfcmulti.o
-obj-$(CONFIG_MISDN_HFCUSB) += hfcsusb.o
-obj-$(CONFIG_MISDN_AVMFRITZ) += avmfritz.o
-obj-$(CONFIG_MISDN_SPEEDFAX) += speedfax.o
-obj-$(CONFIG_MISDN_INFINEON) += mISDNinfineon.o
-obj-$(CONFIG_MISDN_W6692) += w6692.o
-obj-$(CONFIG_MISDN_NETJET) += netjet.o
-# chip modules
-obj-$(CONFIG_MISDN_IPAC) += mISDNipac.o
-obj-$(CONFIG_MISDN_ISAR) += mISDNisar.o
-
-obj-$(CONFIG_MISDN_HDLC) += isdnhdlc.o
drivers/isdn/mISDN/Makefile deleted +0 -14
deleted file mode 100644
index f3b4b7fa85f8..000000000000
@@ -1,14 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the modular ISDN driver
-#
-
-obj-$(CONFIG_MISDN) += mISDN_core.o
-obj-$(CONFIG_MISDN_DSP) += mISDN_dsp.o
-obj-$(CONFIG_MISDN_L1OIP) += l1oip.o
-
-# multi objects
-
-mISDN_core-objs := core.o fsm.o socket.o clock.o hwchannel.o stack.o layer1.o layer2.o tei.o timerdev.o
-mISDN_dsp-objs := dsp_core.o dsp_cmx.o dsp_tones.o dsp_dtmf.o dsp_audio.o dsp_blowfish.o dsp_pipeline.o dsp_hwec.o
-l1oip-objs := l1oip_core.o l1oip_codec.o
net/bluetooth/Makefile +0 -1
index a7eede7616d8..41049b280887 100644
@@ -6,7 +6,6 @@
 obj-$(CONFIG_BT)       += bluetooth.o
 obj-$(CONFIG_BT_RFCOMM)        += rfcomm/
 obj-$(CONFIG_BT_BNEP)  += bnep/
-obj-$(CONFIG_BT_CMTP)  += cmtp/
 obj-$(CONFIG_BT_HIDP)  += hidp/
 obj-$(CONFIG_BT_6LOWPAN) += bluetooth_6lowpan.o
 
net/bluetooth/cmtp/Makefile deleted +0 -8
deleted file mode 100644
index b2262ca97499..000000000000
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for the Linux Bluetooth CMTP layer
-#
-
-obj-$(CONFIG_BT_CMTP) += cmtp.o
-
-cmtp-objs := core.o sock.o capi.o
drivers/isdn/capi/kcapi.h deleted +0 -182
deleted file mode 100644
index 479623e1db2a..000000000000
@@ -1,182 +0,0 @@
-/*
- * Kernel CAPI 2.0 Module
- *
- * Copyright 1999 by Carsten Paeth <[email protected]>
- * Copyright 2002 by Kai Germaschewski <[email protected]>
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-
-#include <linux/kernel.h>
-#include <linux/spinlock.h>
-#include <linux/list.h>
-#include <linux/isdn/capilli.h>
-
-#ifdef KCAPI_DEBUG
-#define DBG(format, arg...) do {                                       \
-               printk(KERN_DEBUG "%s: " format "\n" , __func__ , ## arg); \
-       } while (0)
-#else
-#define DBG(format, arg...) /* */
-#endif
-
-enum {
-       CAPI_CTR_DETACHED = 0,
-       CAPI_CTR_DETECTED = 1,
-       CAPI_CTR_LOADING  = 2,
-       CAPI_CTR_RUNNING  = 3,
-};
-
-extern struct capi_ctr *capi_controller[CAPI_MAXCONTR];
-extern struct mutex capi_controller_lock;
-
-extern struct capi20_appl *capi_applications[CAPI_MAXAPPL];
-
-void kcapi_proc_init(void);
-void kcapi_proc_exit(void);
-
-struct capi20_appl {
-       u16 applid;
-       capi_register_params rparam;
-       void (*recv_message)(struct capi20_appl *ap, struct sk_buff *skb);
-       void *private;
-
-       /* internal to kernelcapi.o */
-       unsigned long nrecvctlpkt;
-       unsigned long nrecvdatapkt;
-       unsigned long nsentctlpkt;
-       unsigned long nsentdatapkt;
-       struct mutex recv_mtx;
-       struct sk_buff_head recv_queue;
-       struct work_struct recv_work;
-       int release_in_progress;
-};
-
-u16 capi20_isinstalled(void);
-u16 capi20_register(struct capi20_appl *ap);
-u16 capi20_release(struct capi20_appl *ap);
-u16 capi20_put_message(struct capi20_appl *ap, struct sk_buff *skb);
-u16 capi20_get_manufacturer(u32 contr, u8 buf[CAPI_MANUFACTURER_LEN]);
-u16 capi20_get_version(u32 contr, struct capi_version *verp);
-u16 capi20_get_serial(u32 contr, u8 serial[CAPI_SERIAL_LEN]);
-u16 capi20_get_profile(u32 contr, struct capi_profile *profp);
-int capi20_manufacturer(unsigned long cmd, void __user *data);
-
-#define CAPICTR_UP                     0
-#define CAPICTR_DOWN                   1
-
-int kcapi_init(void);
-void kcapi_exit(void);
-
-/*----- basic-type definitions -----*/
-
-typedef __u8 *_cstruct;
-
-typedef enum {
-       CAPI_COMPOSE,
-       CAPI_DEFAULT
-} _cmstruct;
-
-/*
-   The _cmsg structure contains all possible CAPI 2.0 parameter.
-   All parameters are stored here first. The function CAPI_CMSG_2_MESSAGE
-   assembles the parameter and builds CAPI2.0 conform messages.
-   CAPI_MESSAGE_2_CMSG disassembles CAPI 2.0 messages and stores the
-   parameter in the _cmsg structure
- */
-
-typedef struct {
-       /* Header */
-       __u16 ApplId;
-       __u8 Command;
-       __u8 Subcommand;
-       __u16 Messagenumber;
-
-       /* Parameter */
-       union {
-               __u32 adrController;
-               __u32 adrPLCI;
-               __u32 adrNCCI;
-       } adr;
-
-       _cmstruct AdditionalInfo;
-       _cstruct B1configuration;
-       __u16 B1protocol;
-       _cstruct B2configuration;
-       __u16 B2protocol;
-       _cstruct B3configuration;
-       __u16 B3protocol;
-       _cstruct BC;
-       _cstruct BChannelinformation;
-       _cmstruct BProtocol;
-       _cstruct CalledPartyNumber;
-       _cstruct CalledPartySubaddress;
-       _cstruct CallingPartyNumber;
-       _cstruct CallingPartySubaddress;
-       __u32 CIPmask;
-       __u32 CIPmask2;
-       __u16 CIPValue;
-       __u32 Class;
-       _cstruct ConnectedNumber;
-       _cstruct ConnectedSubaddress;
-       __u32 Data;
-       __u16 DataHandle;
-       __u16 DataLength;
-       _cstruct FacilityConfirmationParameter;
-       _cstruct Facilitydataarray;
-       _cstruct FacilityIndicationParameter;
-       _cstruct FacilityRequestParameter;
-       __u16 FacilitySelector;
-       __u16 Flags;
-       __u32 Function;
-       _cstruct HLC;
-       __u16 Info;
-       _cstruct InfoElement;
-       __u32 InfoMask;
-       __u16 InfoNumber;
-       _cstruct Keypadfacility;
-       _cstruct LLC;
-       _cstruct ManuData;
-       __u32 ManuID;
-       _cstruct NCPI;
-       __u16 Reason;
-       __u16 Reason_B3;
-       __u16 Reject;
-       _cstruct Useruserdata;
-
-       /* intern */
-       unsigned l, p;
-       unsigned char *par;
-       __u8 *m;
-
-       /* buffer to construct message */
-       __u8 buf[180];
-
-} _cmsg;
-
-/*-----------------------------------------------------------------------*/
-
-/*
- * Debugging / Tracing functions
- */
-
-char *capi_cmd2str(__u8 cmd, __u8 subcmd);
-
-typedef struct {
-       u_char  *buf;
-       u_char  *p;
-       size_t  size;
-       size_t  pos;
-} _cdebbuf;
-
-#define        CDEBUG_SIZE     1024
-#define        CDEBUG_GSIZE    4096
-
-void cdebbuf_free(_cdebbuf *cdb);
-int cdebug_init(void);
-void cdebug_exit(void);
-
-_cdebbuf *capi_message2str(__u8 *msg);
drivers/isdn/hardware/mISDN/hfc_multi.h deleted +0 -1236
deleted file mode 100644
index 5acf826d913c..000000000000
@@ -1,1236 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * see notice in hfc_multi.c
- */
-
-#define DEBUG_HFCMULTI_FIFO    0x00010000
-#define        DEBUG_HFCMULTI_CRC      0x00020000
-#define        DEBUG_HFCMULTI_INIT     0x00040000
-#define        DEBUG_HFCMULTI_PLXSD    0x00080000
-#define        DEBUG_HFCMULTI_MODE     0x00100000
-#define        DEBUG_HFCMULTI_MSG      0x00200000
-#define        DEBUG_HFCMULTI_STATE    0x00400000
-#define        DEBUG_HFCMULTI_FILL     0x00800000
-#define        DEBUG_HFCMULTI_SYNC     0x01000000
-#define        DEBUG_HFCMULTI_DTMF     0x02000000
-#define        DEBUG_HFCMULTI_LOCK     0x80000000
-
-#define        PCI_ENA_REGIO   0x01
-#define        PCI_ENA_MEMIO   0x02
-
-#define XHFC_IRQ       4               /* SIU_IRQ2 */
-#define XHFC_MEMBASE   0xFE000000
-#define XHFC_MEMSIZE    0x00001000
-#define XHFC_OFFSET    0x00001000
-#define PA_XHFC_A0     0x0020          /* PA10 */
-#define PB_XHFC_IRQ1   0x00000100      /* PB23 */
-#define PB_XHFC_IRQ2   0x00000200      /* PB22 */
-#define PB_XHFC_IRQ3   0x00000400      /* PB21 */
-#define PB_XHFC_IRQ4   0x00000800      /* PB20 */
-
-/*
- * NOTE: some registers are assigned multiple times due to different modes
- *       also registers are assigned differen for HFC-4s/8s and HFC-E1
- */
-
-/*
-  #define MAX_FRAME_SIZE       2048
-*/
-
-struct hfc_chan {
-       struct dchannel *dch;   /* link if channel is a D-channel */
-       struct bchannel *bch;   /* link if channel is a B-channel */
-       int             port;   /* the interface port this */
-                               /* channel is associated with */
-       int             nt_timer; /* -1 if off, 0 if elapsed, >0 if running */
-       int             los, ais, slip_tx, slip_rx, rdi; /* current alarms */
-       int             jitter;
-       u_long          cfg;    /* port configuration */
-       int             sync;   /* sync state (used by E1) */
-       u_int           protocol; /* current protocol */
-       int             slot_tx; /* current pcm slot */
-       int             bank_tx; /* current pcm bank */
-       int             slot_rx;
-       int             bank_rx;
-       int             conf;   /* conference setting of TX slot */
-       int             txpending;      /* if there is currently data in */
-                                       /* the FIFO 0=no, 1=yes, 2=splloop */
-       int             Zfill;  /* rx-fifo level on last hfcmulti_tx */
-       int             rx_off; /* set to turn fifo receive off */
-       int             coeff_count; /* curren coeff block */
-       s32             *coeff; /* memory pointer to 8 coeff blocks */
-};
-
-
-struct hfcm_hw {
-       u_char  r_ctrl;
-       u_char  r_irq_ctrl;
-       u_char  r_cirm;
-       u_char  r_ram_sz;
-       u_char  r_pcm_md0;
-       u_char  r_irqmsk_misc;
-       u_char  r_dtmf;
-       u_char  r_st_sync;
-       u_char  r_sci_msk;
-       u_char  r_tx0, r_tx1;
-       u_char  a_st_ctrl0[8];
-       u_char  r_bert_wd_md;
-       timer_t timer;
-};
-
-
-/* for each stack these flags are used (cfg) */
-#define        HFC_CFG_NONCAP_TX       1 /* S/T TX interface has less capacity */
-#define        HFC_CFG_DIS_ECHANNEL    2 /* disable E-channel processing */
-#define        HFC_CFG_REG_ECHANNEL    3 /* register E-channel */
-#define        HFC_CFG_OPTICAL         4 /* the E1 interface is optical */
-#define        HFC_CFG_REPORT_LOS      5 /* the card should report loss of signal */
-#define        HFC_CFG_REPORT_AIS      6 /* the card should report alarm ind. sign. */
-#define        HFC_CFG_REPORT_SLIP     7 /* the card should report bit slips */
-#define        HFC_CFG_REPORT_RDI      8 /* the card should report remote alarm */
-#define        HFC_CFG_DTMF            9 /* enable DTMF-detection */
-#define        HFC_CFG_CRC4            10 /* disable CRC-4 Multiframe mode, */
-/* use double frame instead. */
-
-#define HFC_TYPE_E1            1 /* controller is HFC-E1 */
-#define HFC_TYPE_4S            4 /* controller is HFC-4S */
-#define HFC_TYPE_8S            8 /* controller is HFC-8S */
-#define HFC_TYPE_XHFC          5 /* controller is XHFC */
-
-#define        HFC_CHIP_EXRAM_128      0 /* external ram 128k */
-#define        HFC_CHIP_EXRAM_512      1 /* external ram 256k */
-#define        HFC_CHIP_REVISION0      2 /* old fifo handling */
-#define        HFC_CHIP_PCM_SLAVE      3 /* PCM is slave */
-#define        HFC_CHIP_PCM_MASTER     4 /* PCM is master */
-#define        HFC_CHIP_RX_SYNC        5 /* disable pll sync for pcm */
-#define        HFC_CHIP_DTMF           6 /* DTMF decoding is enabled */
-#define        HFC_CHIP_CONF           7 /* conference handling is enabled */
-#define        HFC_CHIP_ULAW           8 /* ULAW mode */
-#define        HFC_CHIP_CLOCK2         9 /* double clock mode */
-#define        HFC_CHIP_E1CLOCK_GET    10 /* always get clock from E1 interface */
-#define        HFC_CHIP_E1CLOCK_PUT    11 /* always put clock from E1 interface */
-#define        HFC_CHIP_WATCHDOG       12 /* whether we should send signals */
-/* to the watchdog */
-#define        HFC_CHIP_B410P          13 /* whether we have a b410p with echocan in */
-/* hw */
-#define        HFC_CHIP_PLXSD          14 /* whether we have a Speech-Design PLX */
-#define        HFC_CHIP_EMBSD          15 /* whether we have a SD Embedded board */
-
-#define HFC_IO_MODE_PCIMEM     0x00 /* normal memory mapped IO */
-#define HFC_IO_MODE_REGIO      0x01 /* PCI io access */
-#define HFC_IO_MODE_PLXSD      0x02 /* access HFC via PLX9030 */
-#define HFC_IO_MODE_EMBSD      0x03 /* direct access */
-
-/* table entry in the PCI devices list */
-struct hm_map {
-       char *vendor_name;
-       char *card_name;
-       int type;
-       int ports;
-       int clock2;
-       int leds;
-       int opticalsupport;
-       int dip_type;
-       int io_mode;
-       int irq;
-};
-
-struct hfc_multi {
-       struct list_head        list;
-       struct hm_map   *mtyp;
-       int             id;
-       int             pcm;    /* id of pcm bus */
-       int             ctype;  /* controller type */
-       int             ports;
-
-       u_int           irq;    /* irq used by card */
-       u_int           irqcnt;
-       struct pci_dev  *pci_dev;
-       int             io_mode; /* selects mode */
-#ifdef HFC_REGISTER_DEBUG
-       void            (*HFC_outb)(struct hfc_multi *hc, u_char reg,
-                                   u_char val, const char *function, int line);
-       void            (*HFC_outb_nodebug)(struct hfc_multi *hc, u_char reg,
-                                           u_char val, const char *function, int line);
-       u_char          (*HFC_inb)(struct hfc_multi *hc, u_char reg,
-                                  const char *function, int line);
-       u_char          (*HFC_inb_nodebug)(struct hfc_multi *hc, u_char reg,
-                                          const char *function, int line);
-       u_short         (*HFC_inw)(struct hfc_multi *hc, u_char reg,
-                                  const char *function, int line);
-       u_short         (*HFC_inw_nodebug)(struct hfc_multi *hc, u_char reg,
-                                          const char *function, int line);
-       void            (*HFC_wait)(struct hfc_multi *hc,
-                                   const char *function, int line);
-       void            (*HFC_wait_nodebug)(struct hfc_multi *hc,
-                                           const char *function, int line);
-#else
-       void            (*HFC_outb)(struct hfc_multi *hc, u_char reg,
-                                   u_char val);
-       void            (*HFC_outb_nodebug)(struct hfc_multi *hc, u_char reg,
-                                           u_char val);
-       u_char          (*HFC_inb)(struct hfc_multi *hc, u_char reg);
-       u_char          (*HFC_inb_nodebug)(struct hfc_multi *hc, u_char reg);
-       u_short         (*HFC_inw)(struct hfc_multi *hc, u_char reg);
-       u_short         (*HFC_inw_nodebug)(struct hfc_multi *hc, u_char reg);
-       void            (*HFC_wait)(struct hfc_multi *hc);
-       void            (*HFC_wait_nodebug)(struct hfc_multi *hc);
-#endif
-       void            (*read_fifo)(struct hfc_multi *hc, u_char *data,
-                                    int len);
-       void            (*write_fifo)(struct hfc_multi *hc, u_char *data,
-                                     int len);
-       u_long          pci_origmembase, plx_origmembase;
-       void __iomem    *pci_membase; /* PCI memory */
-       void __iomem    *plx_membase; /* PLX memory */
-       u_long          xhfc_origmembase;
-       u_char          *xhfc_membase;
-       u_long          *xhfc_memaddr, *xhfc_memdata;
-#ifdef CONFIG_MISDN_HFCMULTI_8xx
-       struct immap    *immap;
-#endif
-       u_long          pb_irqmsk;      /* Portbit mask to check the IRQ line */
-       u_long          pci_iobase; /* PCI IO */
-       struct hfcm_hw  hw;     /* remember data of write-only-registers */
-
-       u_long          chip;   /* chip configuration */
-       int             masterclk; /* port that provides master clock -1=off */
-       unsigned char   silence;/* silence byte */
-       unsigned char   silence_data[128];/* silence block */
-       int             dtmf;   /* flag that dtmf is currently in process */
-       int             Flen;   /* F-buffer size */
-       int             Zlen;   /* Z-buffer size (must be int for calculation)*/
-       int             max_trans; /* maximum transparent fifo fill */
-       int             Zmin;   /* Z-buffer offset */
-       int             DTMFbase; /* base address of DTMF coefficients */
-
-       u_int           slots;  /* number of PCM slots */
-       u_int           leds;   /* type of leds */
-       u_long          ledstate; /* save last state of leds */
-       int             opticalsupport; /* has the e1 board */
-                                       /* an optical Interface */
-
-       u_int           bmask[32]; /* bitmask of bchannels for port */
-       u_char          dnum[32]; /* array of used dchannel numbers for port */
-       u_char          created[32]; /* what port is created */
-       u_int           activity_tx; /* if there is data TX / RX */
-       u_int           activity_rx; /* bitmask according to port number */
-                                    /* (will be cleared after */
-                                    /* showing led-states) */
-       u_int           flash[8]; /* counter for flashing 8 leds on activity */
-
-       u_long          wdcount;        /* every 500 ms we need to */
-                                       /* send the watchdog a signal */
-       u_char          wdbyte; /* watchdog toggle byte */
-       int             e1_state; /* keep track of last state */
-       int             e1_getclock; /* if sync is retrieved from interface */
-       int             syncronized; /* keep track of existing sync interface */
-       int             e1_resync; /* resync jobs */
-
-       spinlock_t      lock;   /* the lock */
-
-       struct mISDNclock *iclock; /* isdn clock support */
-       int             iclock_on;
-
-       /*
-        * the channel index is counted from 0, regardless where the channel
-        * is located on the hfc-channel.
-        * the bch->channel is equvalent to the hfc-channel
-        */
-       struct hfc_chan chan[32];
-       signed char     slot_owner[256]; /* owner channel of slot */
-};
-
-/* PLX GPIOs */
-#define        PLX_GPIO4_DIR_BIT       13
-#define        PLX_GPIO4_BIT           14
-#define        PLX_GPIO5_DIR_BIT       16
-#define        PLX_GPIO5_BIT           17
-#define        PLX_GPIO6_DIR_BIT       19
-#define        PLX_GPIO6_BIT           20
-#define        PLX_GPIO7_DIR_BIT       22
-#define        PLX_GPIO7_BIT           23
-#define PLX_GPIO8_DIR_BIT      25
-#define PLX_GPIO8_BIT          26
-
-#define        PLX_GPIO4               (1 << PLX_GPIO4_BIT)
-#define        PLX_GPIO5               (1 << PLX_GPIO5_BIT)
-#define        PLX_GPIO6               (1 << PLX_GPIO6_BIT)
-#define        PLX_GPIO7               (1 << PLX_GPIO7_BIT)
-#define PLX_GPIO8              (1 << PLX_GPIO8_BIT)
-
-#define        PLX_GPIO4_DIR           (1 << PLX_GPIO4_DIR_BIT)
-#define        PLX_GPIO5_DIR           (1 << PLX_GPIO5_DIR_BIT)
-#define        PLX_GPIO6_DIR           (1 << PLX_GPIO6_DIR_BIT)
-#define        PLX_GPIO7_DIR           (1 << PLX_GPIO7_DIR_BIT)
-#define PLX_GPIO8_DIR          (1 << PLX_GPIO8_DIR_BIT)
-
-#define        PLX_TERM_ON                     PLX_GPIO7
-#define        PLX_SLAVE_EN_N          PLX_GPIO5
-#define        PLX_MASTER_EN           PLX_GPIO6
-#define        PLX_SYNC_O_EN           PLX_GPIO4
-#define PLX_DSP_RES_N          PLX_GPIO8
-/* GPIO4..8 Enable & Set to OUT, SLAVE_EN_N = 1 */
-#define PLX_GPIOC_INIT         (PLX_GPIO4_DIR | PLX_GPIO5_DIR | PLX_GPIO6_DIR \
-                                | PLX_GPIO7_DIR | PLX_GPIO8_DIR | PLX_SLAVE_EN_N)
-
-/* PLX Interrupt Control/STATUS */
-#define PLX_INTCSR_LINTI1_ENABLE 0x01
-#define PLX_INTCSR_LINTI1_STATUS 0x04
-#define PLX_INTCSR_LINTI2_ENABLE 0x08
-#define PLX_INTCSR_LINTI2_STATUS 0x20
-#define PLX_INTCSR_PCIINT_ENABLE 0x40
-
-/* PLX Registers */
-#define PLX_INTCSR 0x4c
-#define PLX_CNTRL  0x50
-#define PLX_GPIOC  0x54
-
-
-/*
- * REGISTER SETTING FOR HFC-4S/8S AND HFC-E1
- */
-
-/* write only registers */
-#define R_CIRM                 0x00
-#define R_CTRL                 0x01
-#define R_BRG_PCM_CFG          0x02
-#define R_RAM_ADDR0            0x08
-#define R_RAM_ADDR1            0x09
-#define R_RAM_ADDR2            0x0A
-#define R_FIRST_FIFO           0x0B
-#define R_RAM_SZ               0x0C
-#define R_FIFO_MD              0x0D
-#define R_INC_RES_FIFO         0x0E
-#define R_FSM_IDX              0x0F
-#define R_FIFO                 0x0F
-#define R_SLOT                 0x10
-#define R_IRQMSK_MISC          0x11
-#define R_SCI_MSK              0x12
-#define R_IRQ_CTRL             0x13
-#define R_PCM_MD0              0x14
-#define R_PCM_MD1              0x15
-#define R_PCM_MD2              0x15
-#define R_SH0H                 0x15
-#define R_SH1H                 0x15
-#define R_SH0L                 0x15
-#define R_SH1L                 0x15
-#define R_SL_SEL0              0x15
-#define R_SL_SEL1              0x15
-#define R_SL_SEL2              0x15
-#define R_SL_SEL3              0x15
-#define R_SL_SEL4              0x15
-#define R_SL_SEL5              0x15
-#define R_SL_SEL6              0x15
-#define R_SL_SEL7              0x15
-#define R_ST_SEL               0x16
-#define R_ST_SYNC              0x17
-#define R_CONF_EN              0x18
-#define R_TI_WD                        0x1A
-#define R_BERT_WD_MD           0x1B
-#define R_DTMF                 0x1C
-#define R_DTMF_N               0x1D
-#define R_E1_WR_STA            0x20
-#define R_E1_RD_STA            0x20
-#define R_LOS0                 0x22
-#define R_LOS1                 0x23
-#define R_RX0                  0x24
-#define R_RX_FR0               0x25
-#define R_RX_FR1               0x26
-#define R_TX0                  0x28
-#define R_TX1                  0x29
-#define R_TX_FR0               0x2C
-
-#define R_TX_FR1               0x2D
-#define R_TX_FR2               0x2E
-#define R_JATT_ATT             0x2F /* undocumented */
-#define A_ST_RD_STATE          0x30
-#define A_ST_WR_STATE          0x30
-#define R_RX_OFF               0x30
-#define A_ST_CTRL0             0x31
-#define R_SYNC_OUT             0x31
-#define A_ST_CTRL1             0x32
-#define A_ST_CTRL2             0x33
-#define A_ST_SQ_WR             0x34
-#define R_TX_OFF               0x34
-#define R_SYNC_CTRL            0x35
-#define A_ST_CLK_DLY           0x37
-#define R_PWM0                 0x38
-#define R_PWM1                 0x39
-#define A_ST_B1_TX             0x3C
-#define A_ST_B2_TX             0x3D
-#define A_ST_D_TX              0x3E
-#define R_GPIO_OUT0            0x40
-#define R_GPIO_OUT1            0x41
-#define R_GPIO_EN0             0x42
-#define R_GPIO_EN1             0x43
-#define R_GPIO_SEL             0x44
-#define R_BRG_CTRL             0x45
-#define R_PWM_MD               0x46
-#define R_BRG_MD               0x47
-#define R_BRG_TIM0             0x48
-#define R_BRG_TIM1             0x49
-#define R_BRG_TIM2             0x4A
-#define R_BRG_TIM3             0x4B
-#define R_BRG_TIM_SEL01                0x4C
-#define R_BRG_TIM_SEL23                0x4D
-#define R_BRG_TIM_SEL45                0x4E
-#define R_BRG_TIM_SEL67                0x4F
-#define A_SL_CFG               0xD0
-#define A_CONF                 0xD1
-#define A_CH_MSK               0xF4
-#define A_CON_HDLC             0xFA
-#define A_SUBCH_CFG            0xFB
-#define A_CHANNEL              0xFC
-#define A_FIFO_SEQ             0xFD
-#define A_IRQ_MSK              0xFF
-
-/* read only registers */
-#define A_Z12                  0x04
-#define A_Z1L                  0x04
-#define A_Z1                   0x04
-#define A_Z1H                  0x05
-#define A_Z2L                  0x06
-#define A_Z2                   0x06
-#define A_Z2H                  0x07
-#define A_F1                   0x0C
-#define A_F12                  0x0C
-#define A_F2                   0x0D
-#define R_IRQ_OVIEW            0x10
-#define R_IRQ_MISC             0x11
-#define R_IRQ_STATECH          0x12
-#define R_CONF_OFLOW           0x14
-#define R_RAM_USE              0x15
-#define R_CHIP_ID              0x16
-#define R_BERT_STA             0x17
-#define R_F0_CNTL              0x18
-#define R_F0_CNTH              0x19
-#define R_BERT_EC              0x1A
-#define R_BERT_ECL             0x1A
-#define R_BERT_ECH             0x1B
-#define R_STATUS               0x1C
-#define R_CHIP_RV              0x1F
-#define R_STATE                        0x20
-#define R_SYNC_STA             0x24
-#define R_RX_SL0_0             0x25
-#define R_RX_SL0_1             0x26
-#define R_RX_SL0_2             0x27
-#define R_JATT_DIR             0x2b /* undocumented */
-#define R_SLIP                 0x2c
-#define A_ST_RD_STA            0x30
-#define R_FAS_EC               0x30
-#define R_FAS_ECL              0x30
-#define R_FAS_ECH              0x31
-#define R_VIO_EC               0x32
-#define R_VIO_ECL              0x32
-#define R_VIO_ECH              0x33
-#define A_ST_SQ_RD             0x34
-#define R_CRC_EC               0x34
-#define R_CRC_ECL              0x34
-#define R_CRC_ECH              0x35
-#define R_E_EC                 0x36
-#define R_E_ECL                        0x36
-#define R_E_ECH                        0x37
-#define R_SA6_SA13_EC          0x38
-#define R_SA6_SA13_ECL         0x38
-#define R_SA6_SA13_ECH         0x39
-#define R_SA6_SA23_EC          0x3A
-#define R_SA6_SA23_ECL         0x3A
-#define R_SA6_SA23_ECH         0x3B
-#define A_ST_B1_RX             0x3C
-#define A_ST_B2_RX             0x3D
-#define A_ST_D_RX              0x3E
-#define A_ST_E_RX              0x3F
-#define R_GPIO_IN0             0x40
-#define R_GPIO_IN1             0x41
-#define R_GPI_IN0              0x44
-#define R_GPI_IN1              0x45
-#define R_GPI_IN2              0x46
-#define R_GPI_IN3              0x47
-#define R_INT_DATA             0x88
-#define R_IRQ_FIFO_BL0         0xC8
-#define R_IRQ_FIFO_BL1         0xC9
-#define R_IRQ_FIFO_BL2         0xCA
-#define R_IRQ_FIFO_BL3         0xCB
-#define R_IRQ_FIFO_BL4         0xCC
-#define R_IRQ_FIFO_BL5         0xCD
-#define R_IRQ_FIFO_BL6         0xCE
-#define R_IRQ_FIFO_BL7         0xCF
-
-/* read and write registers */
-#define A_FIFO_DATA0           0x80
-#define A_FIFO_DATA1           0x80
-#define A_FIFO_DATA2           0x80
-#define A_FIFO_DATA0_NOINC     0x84
-#define A_FIFO_DATA1_NOINC     0x84
-#define A_FIFO_DATA2_NOINC     0x84
-#define R_RAM_DATA             0xC0
-
-
-/*
- * BIT SETTING FOR HFC-4S/8S AND HFC-E1
- */
-
-/* chapter 2: universal bus interface */
-/* R_CIRM */
-#define V_IRQ_SEL              0x01
-#define V_SRES                 0x08
-#define V_HFCRES               0x10
-#define V_PCMRES               0x20
-#define V_STRES                        0x40
-#define V_ETRES                        0x40
-#define V_RLD_EPR              0x80
-/* R_CTRL */
-#define V_FIFO_LPRIO           0x02
-#define V_SLOW_RD              0x04
-#define V_EXT_RAM              0x08
-#define V_CLK_OFF              0x20
-#define V_ST_CLK               0x40
-/* R_RAM_ADDR0 */
-#define V_RAM_ADDR2            0x01
-#define V_ADDR_RES             0x40
-#define V_ADDR_INC             0x80
-/* R_RAM_SZ */
-#define V_RAM_SZ               0x01
-#define V_PWM0_16KHZ           0x10
-#define V_PWM1_16KHZ           0x20
-#define V_FZ_MD                        0x80
-/* R_CHIP_ID */
-#define V_PNP_IRQ              0x01
-#define V_CHIP_ID              0x10
-
-/* chapter 3: data flow */
-/* R_FIRST_FIFO */
-#define V_FIRST_FIRO_DIR       0x01
-#define V_FIRST_FIFO_NUM       0x02
-/* R_FIFO_MD */
-#define V_FIFO_MD              0x01
-#define V_CSM_MD               0x04
-#define V_FSM_MD               0x08
-#define V_FIFO_SZ              0x10
-/* R_FIFO */
-#define V_FIFO_DIR             0x01
-#define V_FIFO_NUM             0x02
-#define V_REV                  0x80
-/* R_SLOT */
-#define V_SL_DIR               0x01
-#define V_SL_NUM               0x02
-/* A_SL_CFG */
-#define V_CH_DIR               0x01
-#define V_CH_SEL               0x02
-#define V_ROUTING              0x40
-/* A_CON_HDLC */
-#define V_IFF                  0x01
-#define V_HDLC_TRP             0x02
-#define V_TRP_IRQ              0x04
-#define V_DATA_FLOW            0x20
-/* A_SUBCH_CFG */
-#define V_BIT_CNT              0x01
-#define V_START_BIT            0x08
-#define V_LOOP_FIFO            0x40
-#define V_INV_DATA             0x80
-/* A_CHANNEL */
-#define V_CH_DIR0              0x01
-#define V_CH_NUM0              0x02
-/* A_FIFO_SEQ */
-#define V_NEXT_FIFO_DIR                0x01
-#define V_NEXT_FIFO_NUM                0x02
-#define V_SEQ_END              0x40
-
-/* chapter 4: FIFO handling and HDLC controller */
-/* R_INC_RES_FIFO */
-#define V_INC_F                        0x01
-#define V_RES_F                        0x02
-#define V_RES_LOST             0x04
-
-/* chapter 5: S/T interface */
-/* R_SCI_MSK */
-#define V_SCI_MSK_ST0          0x01
-#define V_SCI_MSK_ST1          0x02
-#define V_SCI_MSK_ST2          0x04
-#define V_SCI_MSK_ST3          0x08
-#define V_SCI_MSK_ST4          0x10
-#define V_SCI_MSK_ST5          0x20
-#define V_SCI_MSK_ST6          0x40
-#define V_SCI_MSK_ST7          0x80
-/* R_ST_SEL */
-#define V_ST_SEL               0x01
-#define V_MULT_ST              0x08
-/* R_ST_SYNC */
-#define V_SYNC_SEL             0x01
-#define V_AUTO_SYNC            0x08
-/* A_ST_WR_STA */
-#define V_ST_SET_STA           0x01
-#define V_ST_LD_STA            0x10
-#define V_ST_ACT               0x20
-#define V_SET_G2_G3            0x80
-/* A_ST_CTRL0 */
-#define V_B1_EN                        0x01
-#define V_B2_EN                        0x02
-#define V_ST_MD                        0x04
-#define V_D_PRIO               0x08
-#define V_SQ_EN                        0x10
-#define V_96KHZ                        0x20
-#define V_TX_LI                        0x40
-#define V_ST_STOP              0x80
-/* A_ST_CTRL1 */
-#define V_G2_G3_EN             0x01
-#define V_D_HI                 0x04
-#define V_E_IGNO               0x08
-#define V_E_LO                 0x10
-#define V_B12_SWAP             0x80
-/* A_ST_CTRL2 */
-#define V_B1_RX_EN             0x01
-#define V_B2_RX_EN             0x02
-#define V_ST_TRIS              0x40
-/* A_ST_CLK_DLY */
-#define V_ST_CK_DLY            0x01
-#define V_ST_SMPL              0x10
-/* A_ST_D_TX */
-#define V_ST_D_TX              0x40
-/* R_IRQ_STATECH */
-#define V_SCI_ST0              0x01
-#define V_SCI_ST1              0x02
-#define V_SCI_ST2              0x04
-#define V_SCI_ST3              0x08
-#define V_SCI_ST4              0x10
-#define V_SCI_ST5              0x20
-#define V_SCI_ST6              0x40
-#define V_SCI_ST7              0x80
-/* A_ST_RD_STA */
-#define V_ST_STA               0x01
-#define V_FR_SYNC_ST           0x10
-#define V_TI2_EXP              0x20
-#define V_INFO0                        0x40
-#define V_G2_G3                        0x80
-/* A_ST_SQ_RD */
-#define V_ST_SQ                        0x01
-#define V_MF_RX_RDY            0x10
-#define V_MF_TX_RDY            0x80
-/* A_ST_D_RX */
-#define V_ST_D_RX              0x40
-/* A_ST_E_RX */
-#define V_ST_E_RX              0x40
-
-/* chapter 5: E1 interface */
-/* R_E1_WR_STA */
-/* R_E1_RD_STA */
-#define V_E1_SET_STA           0x01
-#define V_E1_LD_STA            0x10
-/* R_RX0 */
-#define V_RX_CODE              0x01
-#define V_RX_FBAUD             0x04
-#define V_RX_CMI               0x08
-#define V_RX_INV_CMI           0x10
-#define V_RX_INV_CLK           0x20
-#define V_RX_INV_DATA          0x40
-#define V_AIS_ITU              0x80
-/* R_RX_FR0 */
-#define V_NO_INSYNC            0x01
-#define V_AUTO_RESYNC          0x02
-#define V_AUTO_RECO            0x04
-#define V_SWORD_COND           0x08
-#define V_SYNC_LOSS            0x10
-#define V_XCRC_SYNC            0x20
-#define V_MF_RESYNC            0x40
-#define V_RESYNC               0x80
-/* R_RX_FR1 */
-#define V_RX_MF                        0x01
-#define V_RX_MF_SYNC           0x02
-#define V_RX_SL0_RAM           0x04
-#define V_ERR_SIM              0x20
-#define V_RES_NMF              0x40
-/* R_TX0 */
-#define V_TX_CODE              0x01
-#define V_TX_FBAUD             0x04
-#define V_TX_CMI_CODE          0x08
-#define V_TX_INV_CMI_CODE      0x10
-#define V_TX_INV_CLK           0x20
-#define V_TX_INV_DATA          0x40
-#define V_OUT_EN               0x80
-/* R_TX1 */
-#define V_INV_CLK              0x01
-#define V_EXCHG_DATA_LI                0x02
-#define V_AIS_OUT              0x04
-#define V_ATX                  0x20
-#define V_NTRI                 0x40
-#define V_AUTO_ERR_RES         0x80
-/* R_TX_FR0 */
-#define V_TRP_FAS              0x01
-#define V_TRP_NFAS             0x02
-#define V_TRP_RAL              0x04
-#define V_TRP_SA               0x08
-/* R_TX_FR1 */
-#define V_TX_FAS               0x01
-#define V_TX_NFAS              0x02
-#define V_TX_RAL               0x04
-#define V_TX_SA                        0x08
-/* R_TX_FR2 */
-#define V_TX_MF                        0x01
-#define V_TRP_SL0              0x02
-#define V_TX_SL0_RAM           0x04
-#define V_TX_E                 0x10
-#define V_NEG_E                        0x20
-#define V_XS12_ON              0x40
-#define V_XS15_ON              0x80
-/* R_RX_OFF */
-#define V_RX_SZ                        0x01
-#define V_RX_INIT              0x04
-/* R_SYNC_OUT */
-#define V_SYNC_E1_RX           0x01
-#define V_IPATS0               0x20
-#define V_IPATS1               0x40
-#define V_IPATS2               0x80
-/* R_TX_OFF */
-#define V_TX_SZ                        0x01
-#define V_TX_INIT              0x04
-/* R_SYNC_CTRL */
-#define V_EXT_CLK_SYNC         0x01
-#define V_SYNC_OFFS            0x02
-#define V_PCM_SYNC             0x04
-#define V_NEG_CLK              0x08
-#define V_HCLK                 0x10
-/*
-  #define V_JATT_AUTO_DEL              0x20
-  #define V_JATT_AUTO          0x40
-*/
-#define V_JATT_OFF             0x80
-/* R_STATE */
-#define V_E1_STA               0x01
-#define V_ALT_FR_RX            0x40
-#define V_ALT_FR_TX            0x80
-/* R_SYNC_STA */
-#define V_RX_STA               0x01
-#define V_FR_SYNC_E1           0x04
-#define V_SIG_LOS              0x08
-#define V_MFA_STA              0x10
-#define V_AIS                  0x40
-#define V_NO_MF_SYNC           0x80
-/* R_RX_SL0_0 */
-#define V_SI_FAS               0x01
-#define V_SI_NFAS              0x02
-#define V_A                    0x04
-#define V_CRC_OK               0x08
-#define V_TX_E1                        0x10
-#define V_TX_E2                        0x20
-#define V_RX_E1                        0x40
-#define V_RX_E2                        0x80
-/* R_SLIP */
-#define V_SLIP_RX              0x01
-#define V_FOSLIP_RX            0x08
-#define V_SLIP_TX              0x10
-#define V_FOSLIP_TX            0x80
-
-/* chapter 6: PCM interface */
-/* R_PCM_MD0 */
-#define V_PCM_MD               0x01
-#define V_C4_POL               0x02
-#define V_F0_NEG               0x04
-#define V_F0_LEN               0x08
-#define V_PCM_ADDR             0x10
-/* R_SL_SEL0 */
-#define V_SL_SEL0              0x01
-#define V_SH_SEL0              0x80
-/* R_SL_SEL1 */
-#define V_SL_SEL1              0x01
-#define V_SH_SEL1              0x80
-/* R_SL_SEL2 */
-#define V_SL_SEL2              0x01
-#define V_SH_SEL2              0x80
-/* R_SL_SEL3 */
-#define V_SL_SEL3              0x01
-#define V_SH_SEL3              0x80
-/* R_SL_SEL4 */
-#define V_SL_SEL4              0x01
-#define V_SH_SEL4              0x80
-/* R_SL_SEL5 */
-#define V_SL_SEL5              0x01
-#define V_SH_SEL5              0x80
-/* R_SL_SEL6 */
-#define V_SL_SEL6              0x01
-#define V_SH_SEL6              0x80
-/* R_SL_SEL7 */
-#define V_SL_SEL7              0x01
-#define V_SH_SEL7              0x80
-/* R_PCM_MD1 */
-#define V_ODEC_CON             0x01
-#define V_PLL_ADJ              0x04
-#define V_PCM_DR               0x10
-#define V_PCM_LOOP             0x40
-/* R_PCM_MD2 */
-#define V_SYNC_PLL             0x02
-#define V_SYNC_SRC             0x04
-#define V_SYNC_OUT             0x08
-#define V_ICR_FR_TIME          0x40
-#define V_EN_PLL               0x80
-
-/* chapter 7: pulse width modulation */
-/* R_PWM_MD */
-#define V_EXT_IRQ_EN           0x08
-#define V_PWM0_MD              0x10
-#define V_PWM1_MD              0x40
-
-/* chapter 8: multiparty audio conferences */
-/* R_CONF_EN */
-#define V_CONF_EN              0x01
-#define V_ULAW                 0x80
-/* A_CONF */
-#define V_CONF_NUM             0x01
-#define V_NOISE_SUPPR          0x08
-#define V_ATT_LEV              0x20
-#define V_CONF_SL              0x80
-/* R_CONF_OFLOW */
-#define V_CONF_OFLOW0          0x01
-#define V_CONF_OFLOW1          0x02
-#define V_CONF_OFLOW2          0x04
-#define V_CONF_OFLOW3          0x08
-#define V_CONF_OFLOW4          0x10
-#define V_CONF_OFLOW5          0x20
-#define V_CONF_OFLOW6          0x40
-#define V_CONF_OFLOW7          0x80
-
-/* chapter 9: DTMF contoller */
-/* R_DTMF0 */
-#define V_DTMF_EN              0x01
-#define V_HARM_SEL             0x02
-#define V_DTMF_RX_CH           0x04
-#define V_DTMF_STOP            0x08
-#define V_CHBL_SEL             0x10
-#define V_RST_DTMF             0x40
-#define V_ULAW_SEL             0x80
-
-/* chapter 10: BERT */
-/* R_BERT_WD_MD */
-#define V_PAT_SEQ              0x01
-#define V_BERT_ERR             0x08
-#define V_AUTO_WD_RES          0x20
-#define V_WD_RES               0x80
-/* R_BERT_STA */
-#define V_BERT_SYNC_SRC                0x01
-#define V_BERT_SYNC            0x10
-#define V_BERT_INV_DATA                0x20
-
-/* chapter 11: auxiliary interface */
-/* R_BRG_PCM_CFG */
-#define V_BRG_EN               0x01
-#define V_BRG_MD               0x02
-#define V_PCM_CLK              0x20
-#define V_ADDR_WRDLY           0x40
-/* R_BRG_CTRL */
-#define V_BRG_CS               0x01
-#define V_BRG_ADDR             0x08
-#define V_BRG_CS_SRC           0x80
-/* R_BRG_MD */
-#define V_BRG_MD0              0x01
-#define V_BRG_MD1              0x02
-#define V_BRG_MD2              0x04
-#define V_BRG_MD3              0x08
-#define V_BRG_MD4              0x10
-#define V_BRG_MD5              0x20
-#define V_BRG_MD6              0x40
-#define V_BRG_MD7              0x80
-/* R_BRG_TIM0 */
-#define V_BRG_TIM0_IDLE                0x01
-#define V_BRG_TIM0_CLK         0x10
-/* R_BRG_TIM1 */
-#define V_BRG_TIM1_IDLE                0x01
-#define V_BRG_TIM1_CLK         0x10
-/* R_BRG_TIM2 */
-#define V_BRG_TIM2_IDLE                0x01
-#define V_BRG_TIM2_CLK         0x10
-/* R_BRG_TIM3 */
-#define V_BRG_TIM3_IDLE                0x01
-#define V_BRG_TIM3_CLK         0x10
-/* R_BRG_TIM_SEL01 */
-#define V_BRG_WR_SEL0          0x01
-#define V_BRG_RD_SEL0          0x04
-#define V_BRG_WR_SEL1          0x10
-#define V_BRG_RD_SEL1          0x40
-/* R_BRG_TIM_SEL23 */
-#define V_BRG_WR_SEL2          0x01
-#define V_BRG_RD_SEL2          0x04
-#define V_BRG_WR_SEL3          0x10
-#define V_BRG_RD_SEL3          0x40
-/* R_BRG_TIM_SEL45 */
-#define V_BRG_WR_SEL4          0x01
-#define V_BRG_RD_SEL4          0x04
-#define V_BRG_WR_SEL5          0x10
-#define V_BRG_RD_SEL5          0x40
-/* R_BRG_TIM_SEL67 */
-#define V_BRG_WR_SEL6          0x01
-#define V_BRG_RD_SEL6          0x04
-#define V_BRG_WR_SEL7          0x10
-#define V_BRG_RD_SEL7          0x40
-
-/* chapter 12: clock, reset, interrupt, timer and watchdog */
-/* R_IRQMSK_MISC */
-#define V_STA_IRQMSK           0x01
-#define V_TI_IRQMSK            0x02
-#define V_PROC_IRQMSK          0x04
-#define V_DTMF_IRQMSK          0x08
-#define V_IRQ1S_MSK            0x10
-#define V_SA6_IRQMSK           0x20
-#define V_RX_EOMF_MSK          0x40
-#define V_TX_EOMF_MSK          0x80
-/* R_IRQ_CTRL */
-#define V_FIFO_IRQ             0x01
-#define V_GLOB_IRQ_EN          0x08
-#define V_IRQ_POL              0x10
-/* R_TI_WD */
-#define V_EV_TS                        0x01
-#define V_WD_TS                        0x10
-/* A_IRQ_MSK */
-#define V_IRQ                  0x01
-#define V_BERT_EN              0x02
-#define V_MIX_IRQ              0x04
-/* R_IRQ_OVIEW */
-#define V_IRQ_FIFO_BL0         0x01
-#define V_IRQ_FIFO_BL1         0x02
-#define V_IRQ_FIFO_BL2         0x04
-#define V_IRQ_FIFO_BL3         0x08
-#define V_IRQ_FIFO_BL4         0x10
-#define V_IRQ_FIFO_BL5         0x20
-#define V_IRQ_FIFO_BL6         0x40
-#define V_IRQ_FIFO_BL7         0x80
-/* R_IRQ_MISC */
-#define V_STA_IRQ              0x01
-#define V_TI_IRQ               0x02
-#define V_IRQ_PROC             0x04
-#define V_DTMF_IRQ             0x08
-#define V_IRQ1S                        0x10
-#define V_SA6_IRQ              0x20
-#define V_RX_EOMF              0x40
-#define V_TX_EOMF              0x80
-/* R_STATUS */
-#define V_BUSY                 0x01
-#define V_PROC                 0x02
-#define V_DTMF_STA             0x04
-#define V_LOST_STA             0x08
-#define V_SYNC_IN              0x10
-#define V_EXT_IRQSTA           0x20
-#define V_MISC_IRQSTA          0x40
-#define V_FR_IRQSTA            0x80
-/* R_IRQ_FIFO_BL0 */
-#define V_IRQ_FIFO0_TX         0x01
-#define V_IRQ_FIFO0_RX         0x02
-#define V_IRQ_FIFO1_TX         0x04
-#define V_IRQ_FIFO1_RX         0x08
-#define V_IRQ_FIFO2_TX         0x10
-#define V_IRQ_FIFO2_RX         0x20
-#define V_IRQ_FIFO3_TX         0x40
-#define V_IRQ_FIFO3_RX         0x80
-/* R_IRQ_FIFO_BL1 */
-#define V_IRQ_FIFO4_TX         0x01
-#define V_IRQ_FIFO4_RX         0x02
-#define V_IRQ_FIFO5_TX         0x04
-#define V_IRQ_FIFO5_RX         0x08
-#define V_IRQ_FIFO6_TX         0x10
-#define V_IRQ_FIFO6_RX         0x20
-#define V_IRQ_FIFO7_TX         0x40
-#define V_IRQ_FIFO7_RX         0x80
-/* R_IRQ_FIFO_BL2 */
-#define V_IRQ_FIFO8_TX         0x01
-#define V_IRQ_FIFO8_RX         0x02
-#define V_IRQ_FIFO9_TX         0x04
-#define V_IRQ_FIFO9_RX         0x08
-#define V_IRQ_FIFO10_TX                0x10
-#define V_IRQ_FIFO10_RX                0x20
-#define V_IRQ_FIFO11_TX                0x40
-#define V_IRQ_FIFO11_RX                0x80
-/* R_IRQ_FIFO_BL3 */
-#define V_IRQ_FIFO12_TX                0x01
-#define V_IRQ_FIFO12_RX                0x02
-#define V_IRQ_FIFO13_TX                0x04
-#define V_IRQ_FIFO13_RX                0x08
-#define V_IRQ_FIFO14_TX                0x10
-#define V_IRQ_FIFO14_RX                0x20
-#define V_IRQ_FIFO15_TX                0x40
-#define V_IRQ_FIFO15_RX                0x80
-/* R_IRQ_FIFO_BL4 */
-#define V_IRQ_FIFO16_TX                0x01
-#define V_IRQ_FIFO16_RX                0x02
-#define V_IRQ_FIFO17_TX                0x04
-#define V_IRQ_FIFO17_RX                0x08
-#define V_IRQ_FIFO18_TX                0x10
-#define V_IRQ_FIFO18_RX                0x20
-#define V_IRQ_FIFO19_TX                0x40
-#define V_IRQ_FIFO19_RX                0x80
-/* R_IRQ_FIFO_BL5 */
-#define V_IRQ_FIFO20_TX                0x01
-#define V_IRQ_FIFO20_RX                0x02
-#define V_IRQ_FIFO21_TX                0x04
-#define V_IRQ_FIFO21_RX                0x08
-#define V_IRQ_FIFO22_TX                0x10
-#define V_IRQ_FIFO22_RX                0x20
-#define V_IRQ_FIFO23_TX                0x40
-#define V_IRQ_FIFO23_RX                0x80
-/* R_IRQ_FIFO_BL6 */
-#define V_IRQ_FIFO24_TX                0x01
-#define V_IRQ_FIFO24_RX                0x02
-#define V_IRQ_FIFO25_TX                0x04
-#define V_IRQ_FIFO25_RX                0x08
-#define V_IRQ_FIFO26_TX                0x10
-#define V_IRQ_FIFO26_RX                0x20
-#define V_IRQ_FIFO27_TX                0x40
-#define V_IRQ_FIFO27_RX                0x80
-/* R_IRQ_FIFO_BL7 */
-#define V_IRQ_FIFO28_TX                0x01
-#define V_IRQ_FIFO28_RX                0x02
-#define V_IRQ_FIFO29_TX                0x04
-#define V_IRQ_FIFO29_RX                0x08
-#define V_IRQ_FIFO30_TX                0x10
-#define V_IRQ_FIFO30_RX                0x20
-#define V_IRQ_FIFO31_TX                0x40
-#define V_IRQ_FIFO31_RX                0x80
-
-/* chapter 13: general purpose I/O pins (GPIO) and input pins (GPI) */
-/* R_GPIO_OUT0 */
-#define V_GPIO_OUT0            0x01
-#define V_GPIO_OUT1            0x02
-#define V_GPIO_OUT2            0x04
-#define V_GPIO_OUT3            0x08
-#define V_GPIO_OUT4            0x10
-#define V_GPIO_OUT5            0x20
-#define V_GPIO_OUT6            0x40
-#define V_GPIO_OUT7            0x80
-/* R_GPIO_OUT1 */
-#define V_GPIO_OUT8            0x01
-#define V_GPIO_OUT9            0x02
-#define V_GPIO_OUT10           0x04
-#define V_GPIO_OUT11           0x08
-#define V_GPIO_OUT12           0x10
-#define V_GPIO_OUT13           0x20
-#define V_GPIO_OUT14           0x40
-#define V_GPIO_OUT15           0x80
-/* R_GPIO_EN0 */
-#define V_GPIO_EN0             0x01
-#define V_GPIO_EN1             0x02
-#define V_GPIO_EN2             0x04
-#define V_GPIO_EN3             0x08
-#define V_GPIO_EN4             0x10
-#define V_GPIO_EN5             0x20
-#define V_GPIO_EN6             0x40
-#define V_GPIO_EN7             0x80
-/* R_GPIO_EN1 */
-#define V_GPIO_EN8             0x01
-#define V_GPIO_EN9             0x02
-#define V_GPIO_EN10            0x04
-#define V_GPIO_EN11            0x08
-#define V_GPIO_EN12            0x10
-#define V_GPIO_EN13            0x20
-#define V_GPIO_EN14            0x40
-#define V_GPIO_EN15            0x80
-/* R_GPIO_SEL */
-#define V_GPIO_SEL0            0x01
-#define V_GPIO_SEL1            0x02
-#define V_GPIO_SEL2            0x04
-#define V_GPIO_SEL3            0x08
-#define V_GPIO_SEL4            0x10
-#define V_GPIO_SEL5            0x20
-#define V_GPIO_SEL6            0x40
-#define V_GPIO_SEL7            0x80
-/* R_GPIO_IN0 */
-#define V_GPIO_IN0             0x01
-#define V_GPIO_IN1             0x02
-#define V_GPIO_IN2             0x04
-#define V_GPIO_IN3             0x08
-#define V_GPIO_IN4             0x10
-#define V_GPIO_IN5             0x20
-#define V_GPIO_IN6             0x40
-#define V_GPIO_IN7             0x80
-/* R_GPIO_IN1 */
-#define V_GPIO_IN8             0x01
-#define V_GPIO_IN9             0x02
-#define V_GPIO_IN10            0x04
-#define V_GPIO_IN11            0x08
-#define V_GPIO_IN12            0x10
-#define V_GPIO_IN13            0x20
-#define V_GPIO_IN14            0x40
-#define V_GPIO_IN15            0x80
-/* R_GPI_IN0 */
-#define V_GPI_IN0              0x01
-#define V_GPI_IN1              0x02
-#define V_GPI_IN2              0x04
-#define V_GPI_IN3              0x08
-#define V_GPI_IN4              0x10
-#define V_GPI_IN5              0x20
-#define V_GPI_IN6              0x40
-#define V_GPI_IN7              0x80
-/* R_GPI_IN1 */
-#define V_GPI_IN8              0x01
-#define V_GPI_IN9              0x02
-#define V_GPI_IN10             0x04
-#define V_GPI_IN11             0x08
-#define V_GPI_IN12             0x10
-#define V_GPI_IN13             0x20
-#define V_GPI_IN14             0x40
-#define V_GPI_IN15             0x80
-/* R_GPI_IN2 */
-#define V_GPI_IN16             0x01
-#define V_GPI_IN17             0x02
-#define V_GPI_IN18             0x04
-#define V_GPI_IN19             0x08
-#define V_GPI_IN20             0x10
-#define V_GPI_IN21             0x20
-#define V_GPI_IN22             0x40
-#define V_GPI_IN23             0x80
-/* R_GPI_IN3 */
-#define V_GPI_IN24             0x01
-#define V_GPI_IN25             0x02
-#define V_GPI_IN26             0x04
-#define V_GPI_IN27             0x08
-#define V_GPI_IN28             0x10
-#define V_GPI_IN29             0x20
-#define V_GPI_IN30             0x40
-#define V_GPI_IN31             0x80
-
-/* map of all registers, used for debugging */
-
-#ifdef HFC_REGISTER_DEBUG
-struct hfc_register_names {
-       char *name;
-       u_char reg;
-} hfc_register_names[] = {
-       /* write registers */
-       {"R_CIRM",              0x00},
-       {"R_CTRL",              0x01},
-       {"R_BRG_PCM_CFG ",      0x02},
-       {"R_RAM_ADDR0",         0x08},
-       {"R_RAM_ADDR1",         0x09},
-       {"R_RAM_ADDR2",         0x0A},
-       {"R_FIRST_FIFO",        0x0B},
-       {"R_RAM_SZ",            0x0C},
-       {"R_FIFO_MD",           0x0D},
-       {"R_INC_RES_FIFO",      0x0E},
-       {"R_FIFO / R_FSM_IDX",  0x0F},
-       {"R_SLOT",              0x10},
-       {"R_IRQMSK_MISC",       0x11},
-       {"R_SCI_MSK",           0x12},
-       {"R_IRQ_CTRL",          0x13},
-       {"R_PCM_MD0",           0x14},
-       {"R_0x15",              0x15},
-       {"R_ST_SEL",            0x16},
-       {"R_ST_SYNC",           0x17},
-       {"R_CONF_EN",           0x18},
-       {"R_TI_WD",             0x1A},
-       {"R_BERT_WD_MD",        0x1B},
-       {"R_DTMF",              0x1C},
-       {"R_DTMF_N",            0x1D},
-       {"R_E1_XX_STA",         0x20},
-       {"R_LOS0",              0x22},
-       {"R_LOS1",              0x23},
-       {"R_RX0",               0x24},
-       {"R_RX_FR0",            0x25},
-       {"R_RX_FR1",            0x26},
-       {"R_TX0",               0x28},
-       {"R_TX1",               0x29},
-       {"R_TX_FR0",            0x2C},
-       {"R_TX_FR1",            0x2D},
-       {"R_TX_FR2",            0x2E},
-       {"R_JATT_ATT",          0x2F},
-       {"A_ST_xx_STA/R_RX_OFF", 0x30},
-       {"A_ST_CTRL0/R_SYNC_OUT", 0x31},
-       {"A_ST_CTRL1",          0x32},
-       {"A_ST_CTRL2",          0x33},
-       {"A_ST_SQ_WR",          0x34},
-       {"R_TX_OFF",            0x34},
-       {"R_SYNC_CTRL",         0x35},
-       {"A_ST_CLK_DLY",        0x37},
-       {"R_PWM0",              0x38},
-       {"R_PWM1",              0x39},
-       {"A_ST_B1_TX",          0x3C},
-       {"A_ST_B2_TX",          0x3D},
-       {"A_ST_D_TX",           0x3E},
-       {"R_GPIO_OUT0",         0x40},
-       {"R_GPIO_OUT1",         0x41},
-       {"R_GPIO_EN0",          0x42},
-       {"R_GPIO_EN1",          0x43},
-       {"R_GPIO_SEL",          0x44},
-       {"R_BRG_CTRL",          0x45},
-       {"R_PWM_MD",            0x46},
-       {"R_BRG_MD",            0x47},
-       {"R_BRG_TIM0",          0x48},
-       {"R_BRG_TIM1",          0x49},
-       {"R_BRG_TIM2",          0x4A},
-       {"R_BRG_TIM3",          0x4B},
-       {"R_BRG_TIM_SEL01",     0x4C},
-       {"R_BRG_TIM_SEL23",     0x4D},
-       {"R_BRG_TIM_SEL45",     0x4E},
-       {"R_BRG_TIM_SEL67",     0x4F},
-       {"A_FIFO_DATA0-2",      0x80},
-       {"A_FIFO_DATA0-2_NOINC", 0x84},
-       {"R_RAM_DATA",          0xC0},
-       {"A_SL_CFG",            0xD0},
-       {"A_CONF",              0xD1},
-       {"A_CH_MSK",            0xF4},
-       {"A_CON_HDLC",          0xFA},
-       {"A_SUBCH_CFG",         0xFB},
-       {"A_CHANNEL",           0xFC},
-       {"A_FIFO_SEQ",          0xFD},
-       {"A_IRQ_MSK",           0xFF},
-       {NULL, 0},
-
-       /* read registers */
-       {"A_Z1",                0x04},
-       {"A_Z1H",               0x05},
-       {"A_Z2",                0x06},
-       {"A_Z2H",               0x07},
-       {"A_F1",                0x0C},
-       {"A_F2",                0x0D},
-       {"R_IRQ_OVIEW",         0x10},
-       {"R_IRQ_MISC",          0x11},
-       {"R_IRQ_STATECH",       0x12},
-       {"R_CONF_OFLOW",        0x14},
-       {"R_RAM_USE",           0x15},
-       {"R_CHIP_ID",           0x16},
-       {"R_BERT_STA",          0x17},
-       {"R_F0_CNTL",           0x18},
-       {"R_F0_CNTH",           0x19},
-       {"R_BERT_ECL",          0x1A},
-       {"R_BERT_ECH",          0x1B},
-       {"R_STATUS",            0x1C},
-       {"R_CHIP_RV",           0x1F},
-       {"R_STATE",             0x20},
-       {"R_SYNC_STA",          0x24},
-       {"R_RX_SL0_0",          0x25},
-       {"R_RX_SL0_1",          0x26},
-       {"R_RX_SL0_2",          0x27},
-       {"R_JATT_DIR",          0x2b},
-       {"R_SLIP",              0x2c},
-       {"A_ST_RD_STA",         0x30},
-       {"R_FAS_ECL",           0x30},
-       {"R_FAS_ECH",           0x31},
-       {"R_VIO_ECL",           0x32},
-       {"R_VIO_ECH",           0x33},
-       {"R_CRC_ECL / A_ST_SQ_RD", 0x34},
-       {"R_CRC_ECH",           0x35},
-       {"R_E_ECL",             0x36},
-       {"R_E_ECH",             0x37},
-       {"R_SA6_SA13_ECL",      0x38},
-       {"R_SA6_SA13_ECH",      0x39},
-       {"R_SA6_SA23_ECL",      0x3A},
-       {"R_SA6_SA23_ECH",      0x3B},
-       {"A_ST_B1_RX",          0x3C},
-       {"A_ST_B2_RX",          0x3D},
-       {"A_ST_D_RX",           0x3E},
-       {"A_ST_E_RX",           0x3F},
-       {"R_GPIO_IN0",          0x40},
-       {"R_GPIO_IN1",          0x41},
-       {"R_GPI_IN0",           0x44},
-       {"R_GPI_IN1",           0x45},
-       {"R_GPI_IN2",           0x46},
-       {"R_GPI_IN3",           0x47},
-       {"A_FIFO_DATA0-2",      0x80},
-       {"A_FIFO_DATA0-2_NOINC", 0x84},
-       {"R_INT_DATA",          0x88},
-       {"R_RAM_DATA",          0xC0},
-       {"R_IRQ_FIFO_BL0",      0xC8},
-       {"R_IRQ_FIFO_BL1",      0xC9},
-       {"R_IRQ_FIFO_BL2",      0xCA},
-       {"R_IRQ_FIFO_BL3",      0xCB},
-       {"R_IRQ_FIFO_BL4",      0xCC},
-       {"R_IRQ_FIFO_BL5",      0xCD},
-       {"R_IRQ_FIFO_BL6",      0xCE},
-       {"R_IRQ_FIFO_BL7",      0xCF},
-};
-#endif /* HFC_REGISTER_DEBUG */
drivers/isdn/hardware/mISDN/hfc_multi_8xx.h deleted +0 -167
deleted file mode 100644
index 448ded8f9d24..000000000000
@@ -1,167 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * For License see notice in hfc_multi.c
- *
- * special IO and init functions for the embedded XHFC board
- * from Speech Design
- *
- */
-
-#include <asm/cpm1.h>
-
-/* Change this to the value used by your board */
-#ifndef IMAP_ADDR
-#define IMAP_ADDR      0xFFF00000
-#endif
-
-static void
-#ifdef HFC_REGISTER_DEBUG
-HFC_outb_embsd(struct hfc_multi *hc, u_char reg, u_char val,
-              const char *function, int line)
-#else
-       HFC_outb_embsd(struct hfc_multi *hc, u_char reg, u_char val)
-#endif
-{
-       hc->immap->im_ioport.iop_padat |= PA_XHFC_A0;
-       writeb(reg, hc->xhfc_memaddr);
-       hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0);
-       writeb(val, hc->xhfc_memdata);
-}
-static u_char
-#ifdef HFC_REGISTER_DEBUG
-HFC_inb_embsd(struct hfc_multi *hc, u_char reg, const char *function, int line)
-#else
-       HFC_inb_embsd(struct hfc_multi *hc, u_char reg)
-#endif
-{
-       hc->immap->im_ioport.iop_padat |= PA_XHFC_A0;
-       writeb(reg, hc->xhfc_memaddr);
-       hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0);
-       return readb(hc->xhfc_memdata);
-}
-static u_short
-#ifdef HFC_REGISTER_DEBUG
-HFC_inw_embsd(struct hfc_multi *hc, u_char reg, const char *function, int line)
-#else
-       HFC_inw_embsd(struct hfc_multi *hc, u_char reg)
-#endif
-{
-       hc->immap->im_ioport.iop_padat |= PA_XHFC_A0;
-       writeb(reg, hc->xhfc_memaddr);
-       hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0);
-       return readb(hc->xhfc_memdata);
-}
-static void
-#ifdef HFC_REGISTER_DEBUG
-HFC_wait_embsd(struct hfc_multi *hc, const char *function, int line)
-#else
-       HFC_wait_embsd(struct hfc_multi *hc)
-#endif
-{
-       hc->immap->im_ioport.iop_padat |= PA_XHFC_A0;
-       writeb(R_STATUS, hc->xhfc_memaddr);
-       hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0);
-       while (readb(hc->xhfc_memdata) & V_BUSY)
-               cpu_relax();
-}
-
-/* write fifo data (EMBSD) */
-void
-write_fifo_embsd(struct hfc_multi *hc, u_char *data, int len)
-{
-       hc->immap->im_ioport.iop_padat |= PA_XHFC_A0;
-       *hc->xhfc_memaddr = A_FIFO_DATA0;
-       hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0);
-       while (len) {
-               *hc->xhfc_memdata = *data;
-               data++;
-               len--;
-       }
-}
-
-/* read fifo data (EMBSD) */
-void
-read_fifo_embsd(struct hfc_multi *hc, u_char *data, int len)
-{
-       hc->immap->im_ioport.iop_padat |= PA_XHFC_A0;
-       *hc->xhfc_memaddr = A_FIFO_DATA0;
-       hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0);
-       while (len) {
-               *data = (u_char)(*hc->xhfc_memdata);
-               data++;
-               len--;
-       }
-}
-
-static int
-setup_embedded(struct hfc_multi *hc, struct hm_map *m)
-{
-       printk(KERN_INFO
-              "HFC-multi: card manufacturer: '%s' card name: '%s' clock: %s\n",
-              m->vendor_name, m->card_name, m->clock2 ? "double" : "normal");
-
-       hc->pci_dev = NULL;
-       if (m->clock2)
-               test_and_set_bit(HFC_CHIP_CLOCK2, &hc->chip);
-
-       hc->leds = m->leds;
-       hc->ledstate = 0xAFFEAFFE;
-       hc->opticalsupport = m->opticalsupport;
-
-       hc->pci_iobase = 0;
-       hc->pci_membase = 0;
-       hc->xhfc_membase = NULL;
-       hc->xhfc_memaddr = NULL;
-       hc->xhfc_memdata = NULL;
-
-       /* set memory access methods */
-       if (m->io_mode) /* use mode from card config */
-               hc->io_mode = m->io_mode;
-       switch (hc->io_mode) {
-       case HFC_IO_MODE_EMBSD:
-               test_and_set_bit(HFC_CHIP_EMBSD, &hc->chip);
-               hc->slots = 128; /* required */
-               hc->HFC_outb = HFC_outb_embsd;
-               hc->HFC_inb = HFC_inb_embsd;
-               hc->HFC_inw = HFC_inw_embsd;
-               hc->HFC_wait = HFC_wait_embsd;
-               hc->read_fifo = read_fifo_embsd;
-               hc->write_fifo = write_fifo_embsd;
-               hc->xhfc_origmembase = XHFC_MEMBASE + XHFC_OFFSET * hc->id;
-               hc->xhfc_membase = (u_char *)ioremap(hc->xhfc_origmembase,
-                                                    XHFC_MEMSIZE);
-               if (!hc->xhfc_membase) {
-                       printk(KERN_WARNING
-                              "HFC-multi: failed to remap xhfc address space. "
-                              "(internal error)\n");
-                       return -EIO;
-               }
-               hc->xhfc_memaddr = (u_long *)(hc->xhfc_membase + 4);
-               hc->xhfc_memdata = (u_long *)(hc->xhfc_membase);
-               printk(KERN_INFO
-                      "HFC-multi: xhfc_membase:%#lx xhfc_origmembase:%#lx "
-                      "xhfc_memaddr:%#lx xhfc_memdata:%#lx\n",
-                      (u_long)hc->xhfc_membase, hc->xhfc_origmembase,
-                      (u_long)hc->xhfc_memaddr, (u_long)hc->xhfc_memdata);
-               break;
-       default:
-               printk(KERN_WARNING "HFC-multi: Invalid IO mode.\n");
-               return -EIO;
-       }
-
-       /* Prepare the MPC8XX PortA 10 as output (address/data selector) */
-       hc->immap = (struct immap *)(IMAP_ADDR);
-       hc->immap->im_ioport.iop_papar &= ~(PA_XHFC_A0);
-       hc->immap->im_ioport.iop_paodr &= ~(PA_XHFC_A0);
-       hc->immap->im_ioport.iop_padir |=   PA_XHFC_A0;
-
-       /* Prepare the MPC8xx PortB __X__ as input (ISDN__X__IRQ) */
-       hc->pb_irqmsk = (PB_XHFC_IRQ1 << hc->id);
-       hc->immap->im_cpm.cp_pbpar &= ~(hc->pb_irqmsk);
-       hc->immap->im_cpm.cp_pbodr &= ~(hc->pb_irqmsk);
-       hc->immap->im_cpm.cp_pbdir &= ~(hc->pb_irqmsk);
-
-       /* At this point the needed config is done */
-       /* fifos are still not enabled */
-       return 0;
-}
drivers/isdn/hardware/mISDN/hfc_pci.h deleted +0 -214
deleted file mode 100644
index a0e4806c11fa..000000000000
@@ -1,214 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- *  specific defines for CCD's HFC 2BDS0 PCI chips
- *
- * Author     Werner Cornelius ([email protected])
- *
- * Copyright 1999  by Werner Cornelius ([email protected])
- */
-
-/*
- * thresholds for transparent B-channel mode
- * change mask and threshold simultaneously
- */
-#define HFCPCI_BTRANS_THRESHOLD 128
-#define HFCPCI_FILLEMPTY       64
-#define HFCPCI_BTRANS_THRESMASK 0x00
-
-/* defines for PCI config */
-#define PCI_ENA_MEMIO          0x02
-#define PCI_ENA_MASTER         0x04
-
-/* GCI/IOM bus monitor registers */
-#define HCFPCI_C_I             0x08
-#define HFCPCI_TRxR            0x0C
-#define HFCPCI_MON1_D          0x28
-#define HFCPCI_MON2_D          0x2C
-
-/* GCI/IOM bus timeslot registers */
-#define HFCPCI_B1_SSL          0x80
-#define HFCPCI_B2_SSL          0x84
-#define HFCPCI_AUX1_SSL                0x88
-#define HFCPCI_AUX2_SSL                0x8C
-#define HFCPCI_B1_RSL          0x90
-#define HFCPCI_B2_RSL          0x94
-#define HFCPCI_AUX1_RSL                0x98
-#define HFCPCI_AUX2_RSL                0x9C
-
-/* GCI/IOM bus data registers */
-#define HFCPCI_B1_D            0xA0
-#define HFCPCI_B2_D            0xA4
-#define HFCPCI_AUX1_D          0xA8
-#define HFCPCI_AUX2_D          0xAC
-
-/* GCI/IOM bus configuration registers */
-#define HFCPCI_MST_EMOD                0xB4
-#define HFCPCI_MST_MODE                0xB8
-#define HFCPCI_CONNECT         0xBC
-
-
-/* Interrupt and status registers */
-#define HFCPCI_FIFO_EN         0x44
-#define HFCPCI_TRM             0x48
-#define HFCPCI_B_MODE          0x4C
-#define HFCPCI_CHIP_ID         0x58
-#define HFCPCI_CIRM            0x60
-#define HFCPCI_CTMT            0x64
-#define HFCPCI_INT_M1          0x68
-#define HFCPCI_INT_M2          0x6C
-#define HFCPCI_INT_S1          0x78
-#define HFCPCI_INT_S2          0x7C
-#define HFCPCI_STATUS          0x70
-
-/* S/T section registers */
-#define HFCPCI_STATES          0xC0
-#define HFCPCI_SCTRL           0xC4
-#define HFCPCI_SCTRL_E         0xC8
-#define HFCPCI_SCTRL_R         0xCC
-#define HFCPCI_SQ              0xD0
-#define HFCPCI_CLKDEL          0xDC
-#define HFCPCI_B1_REC          0xF0
-#define HFCPCI_B1_SEND         0xF0
-#define HFCPCI_B2_REC          0xF4
-#define HFCPCI_B2_SEND         0xF4
-#define HFCPCI_D_REC           0xF8
-#define HFCPCI_D_SEND          0xF8
-#define HFCPCI_E_REC           0xFC
-
-
-/* bits in status register (READ) */
-#define HFCPCI_PCI_PROC                0x02
-#define HFCPCI_NBUSY           0x04
-#define HFCPCI_TIMER_ELAP      0x10
-#define HFCPCI_STATINT         0x20
-#define HFCPCI_FRAMEINT                0x40
-#define HFCPCI_ANYINT          0x80
-
-/* bits in CTMT (Write) */
-#define HFCPCI_CLTIMER         0x80
-#define HFCPCI_TIM3_125                0x04
-#define HFCPCI_TIM25           0x10
-#define HFCPCI_TIM50           0x14
-#define HFCPCI_TIM400          0x18
-#define HFCPCI_TIM800          0x1C
-#define HFCPCI_AUTO_TIMER      0x20
-#define HFCPCI_TRANSB2         0x02
-#define HFCPCI_TRANSB1         0x01
-
-/* bits in CIRM (Write) */
-#define HFCPCI_AUX_MSK         0x07
-#define HFCPCI_RESET           0x08
-#define HFCPCI_B1_REV          0x40
-#define HFCPCI_B2_REV          0x80
-
-/* bits in INT_M1 and INT_S1 */
-#define HFCPCI_INTS_B1TRANS    0x01
-#define HFCPCI_INTS_B2TRANS    0x02
-#define HFCPCI_INTS_DTRANS     0x04
-#define HFCPCI_INTS_B1REC      0x08
-#define HFCPCI_INTS_B2REC      0x10
-#define HFCPCI_INTS_DREC       0x20
-#define HFCPCI_INTS_L1STATE    0x40
-#define HFCPCI_INTS_TIMER      0x80
-
-/* bits in INT_M2 */
-#define HFCPCI_PROC_TRANS      0x01
-#define HFCPCI_GCI_I_CHG       0x02
-#define HFCPCI_GCI_MON_REC     0x04
-#define HFCPCI_IRQ_ENABLE      0x08
-#define HFCPCI_PMESEL          0x80
-
-/* bits in STATES */
-#define HFCPCI_STATE_MSK       0x0F
-#define HFCPCI_LOAD_STATE      0x10
-#define HFCPCI_ACTIVATE                0x20
-#define HFCPCI_DO_ACTION       0x40
-#define HFCPCI_NT_G2_G3                0x80
-
-/* bits in HFCD_MST_MODE */
-#define HFCPCI_MASTER          0x01
-#define HFCPCI_SLAVE           0x00
-#define HFCPCI_F0IO_POSITIV    0x02
-#define HFCPCI_F0_NEGATIV      0x04
-#define HFCPCI_F0_2C4          0x08
-/* remaining bits are for codecs control */
-
-/* bits in HFCD_SCTRL */
-#define SCTRL_B1_ENA           0x01
-#define SCTRL_B2_ENA           0x02
-#define SCTRL_MODE_TE          0x00
-#define SCTRL_MODE_NT          0x04
-#define SCTRL_LOW_PRIO         0x08
-#define SCTRL_SQ_ENA           0x10
-#define SCTRL_TEST             0x20
-#define SCTRL_NONE_CAP         0x40
-#define SCTRL_PWR_DOWN         0x80
-
-/* bits in SCTRL_E  */
-#define HFCPCI_AUTO_AWAKE      0x01
-#define HFCPCI_DBIT_1          0x04
-#define HFCPCI_IGNORE_COL      0x08
-#define HFCPCI_CHG_B1_B2       0x80
-
-/* bits in FIFO_EN register */
-#define HFCPCI_FIFOEN_B1       0x03
-#define HFCPCI_FIFOEN_B2       0x0C
-#define HFCPCI_FIFOEN_DTX      0x10
-#define HFCPCI_FIFOEN_B1TX     0x01
-#define HFCPCI_FIFOEN_B1RX     0x02
-#define HFCPCI_FIFOEN_B2TX     0x04
-#define HFCPCI_FIFOEN_B2RX     0x08
-
-
-/* definitions of fifo memory area */
-#define MAX_D_FRAMES 15
-#define MAX_B_FRAMES 31
-#define B_SUB_VAL    0x200
-#define B_FIFO_SIZE  (0x2000 - B_SUB_VAL)
-#define D_FIFO_SIZE  512
-#define D_FREG_MASK  0xF
-
-struct zt {
-       __le16 z1;  /* Z1 pointer 16 Bit */
-       __le16 z2;  /* Z2 pointer 16 Bit */
-};
-
-struct dfifo {
-       u_char data[D_FIFO_SIZE]; /* FIFO data space */
-       u_char fill1[0x20A0 - D_FIFO_SIZE]; /* reserved, do not use */
-       u_char f1, f2; /* f pointers */
-       u_char fill2[0x20C0 - 0x20A2]; /* reserved, do not use */
-       /* mask index with D_FREG_MASK for access */
-       struct zt za[MAX_D_FRAMES + 1];
-       u_char fill3[0x4000 - 0x2100]; /* align 16K */
-};
-
-struct bzfifo {
-       struct zt       za[MAX_B_FRAMES + 1]; /* only range 0x0..0x1F allowed */
-       u_char          f1, f2; /* f pointers */
-       u_char          fill[0x2100 - 0x2082]; /* alignment */
-};
-
-
-union fifo_area {
-       struct {
-               struct dfifo d_tx; /* D-send channel */
-               struct dfifo d_rx; /* D-receive channel */
-       } d_chan;
-       struct {
-               u_char          fill1[0x200];
-               u_char          txdat_b1[B_FIFO_SIZE];
-               struct bzfifo   txbz_b1;
-               struct bzfifo   txbz_b2;
-               u_char          txdat_b2[B_FIFO_SIZE];
-               u_char          fill2[D_FIFO_SIZE];
-               u_char          rxdat_b1[B_FIFO_SIZE];
-               struct bzfifo   rxbz_b1;
-               struct bzfifo   rxbz_b2;
-               u_char rxdat_b2[B_FIFO_SIZE];
-       } b_chans;
-       u_char fill[32768];
-};
-
-#define Write_hfc(a, b, c) (writeb(c, (a->hw.pci_io) + b))
-#define Read_hfc(a, b) (readb((a->hw.pci_io) + b))
drivers/isdn/hardware/mISDN/hfcsusb.h deleted +0 -425
deleted file mode 100644
index 7e2bc5068019..000000000000
@@ -1,425 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * hfcsusb.h, HFC-S USB mISDN driver
- */
-
-#ifndef __HFCSUSB_H__
-#define __HFCSUSB_H__
-
-
-#define DRIVER_NAME "HFC-S_USB"
-
-#define DBG_HFC_CALL_TRACE     0x00010000
-#define DBG_HFC_FIFO_VERBOSE   0x00020000
-#define DBG_HFC_USB_VERBOSE    0x00100000
-#define DBG_HFC_URB_INFO       0x00200000
-#define DBG_HFC_URB_ERROR      0x00400000
-
-#define DEFAULT_TRANSP_BURST_SZ 128
-
-#define HFC_CTRL_TIMEOUT       20      /* 5ms timeout writing/reading regs */
-#define CLKDEL_TE              0x0f    /* CLKDEL in TE mode */
-#define CLKDEL_NT              0x6c    /* CLKDEL in NT mode */
-
-/* hfcsusb Layer1 commands */
-#define HFC_L1_ACTIVATE_TE             1
-#define HFC_L1_ACTIVATE_NT             2
-#define HFC_L1_DEACTIVATE_NT           3
-#define HFC_L1_FORCE_DEACTIVATE_TE     4
-
-/* cmd FLAGS in HFCUSB_STATES register */
-#define HFCUSB_LOAD_STATE      0x10
-#define HFCUSB_ACTIVATE                0x20
-#define HFCUSB_DO_ACTION       0x40
-#define HFCUSB_NT_G2_G3                0x80
-
-/* timers */
-#define NT_ACTIVATION_TIMER    0x01    /* enables NT mode activation Timer */
-#define NT_T1_COUNT            10
-
-#define MAX_BCH_SIZE           2048    /* allowed B-channel packet size */
-
-#define HFCUSB_RX_THRESHOLD    64      /* threshold for fifo report bit rx */
-#define HFCUSB_TX_THRESHOLD    96      /* threshold for fifo report bit tx */
-
-#define HFCUSB_CHIP_ID         0x16    /* Chip ID register index */
-#define HFCUSB_CIRM            0x00    /* cirm register index */
-#define HFCUSB_USB_SIZE                0x07    /* int length register */
-#define HFCUSB_USB_SIZE_I      0x06    /* iso length register */
-#define HFCUSB_F_CROSS         0x0b    /* bit order register */
-#define HFCUSB_CLKDEL          0x37    /* bit delay register */
-#define HFCUSB_CON_HDLC                0xfa    /* channel connect register */
-#define HFCUSB_HDLC_PAR                0xfb
-#define HFCUSB_SCTRL           0x31    /* S-bus control register (tx) */
-#define HFCUSB_SCTRL_E         0x32    /* same for E and special funcs */
-#define HFCUSB_SCTRL_R         0x33    /* S-bus control register (rx) */
-#define HFCUSB_F_THRES         0x0c    /* threshold register */
-#define HFCUSB_FIFO            0x0f    /* fifo select register */
-#define HFCUSB_F_USAGE         0x1a    /* fifo usage register */
-#define HFCUSB_MST_MODE0       0x14
-#define HFCUSB_MST_MODE1       0x15
-#define HFCUSB_P_DATA          0x1f
-#define HFCUSB_INC_RES_F       0x0e
-#define HFCUSB_B1_SSL          0x20
-#define HFCUSB_B2_SSL          0x21
-#define HFCUSB_B1_RSL          0x24
-#define HFCUSB_B2_RSL          0x25
-#define HFCUSB_STATES          0x30
-
-
-#define HFCUSB_CHIPID          0x40    /* ID value of HFC-S USB */
-
-/* fifo registers */
-#define HFCUSB_NUM_FIFOS       8       /* maximum number of fifos */
-#define HFCUSB_B1_TX           0       /* index for B1 transmit bulk/int */
-#define HFCUSB_B1_RX           1       /* index for B1 receive bulk/int */
-#define HFCUSB_B2_TX           2
-#define HFCUSB_B2_RX           3
-#define HFCUSB_D_TX            4
-#define HFCUSB_D_RX            5
-#define HFCUSB_PCM_TX          6
-#define HFCUSB_PCM_RX          7
-
-
-#define USB_INT                0
-#define USB_BULK       1
-#define USB_ISOC       2
-
-#define ISOC_PACKETS_D 8
-#define ISOC_PACKETS_B 8
-#define ISO_BUFFER_SIZE        128
-
-/* defines how much ISO packets are handled in one URB */
-static int iso_packets[8] =
-{ ISOC_PACKETS_B, ISOC_PACKETS_B, ISOC_PACKETS_B, ISOC_PACKETS_B,
-  ISOC_PACKETS_D, ISOC_PACKETS_D, ISOC_PACKETS_D, ISOC_PACKETS_D
-};
-
-
-/* Fifo flow Control for TX ISO */
-#define SINK_MAX       68
-#define SINK_MIN       48
-#define SINK_DMIN      12
-#define SINK_DMAX      18
-#define BITLINE_INF    (-96 * 8)
-
-/* HFC-S USB register access by Control-URSs */
-#define write_reg_atomic(a, b, c)                                      \
-       usb_control_msg((a)->dev, (a)->ctrl_out_pipe, 0, 0x40, (c), (b), \
-                       0, 0, HFC_CTRL_TIMEOUT)
-#define read_reg_atomic(a, b, c)                                       \
-       usb_control_msg((a)->dev, (a)->ctrl_in_pipe, 1, 0xC0, 0, (b), (c), \
-                       1, HFC_CTRL_TIMEOUT)
-#define HFC_CTRL_BUFSIZE 64
-
-struct ctrl_buf {
-       __u8 hfcs_reg;          /* register number */
-       __u8 reg_val;           /* value to be written (or read) */
-};
-
-/*
- * URB error codes
- * Used to represent a list of values and their respective symbolic names
- */
-struct hfcusb_symbolic_list {
-       const int num;
-       const char *name;
-};
-
-static struct hfcusb_symbolic_list urb_errlist[] = {
-       {-ENOMEM, "No memory for allocation of internal structures"},
-       {-ENOSPC, "The host controller's bandwidth is already consumed"},
-       {-ENOENT, "URB was canceled by unlink_urb"},
-       {-EXDEV, "ISO transfer only partially completed"},
-       {-EAGAIN, "Too match scheduled for the future"},
-       {-ENXIO, "URB already queued"},
-       {-EFBIG, "Too much ISO frames requested"},
-       {-ENOSR, "Buffer error (overrun)"},
-       {-EPIPE, "Specified endpoint is stalled (device not responding)"},
-       {-EOVERFLOW, "Babble (bad cable?)"},
-       {-EPROTO, "Bit-stuff error (bad cable?)"},
-       {-EILSEQ, "CRC/Timeout"},
-       {-ETIMEDOUT, "NAK (device does not respond)"},
-       {-ESHUTDOWN, "Device unplugged"},
-       {-1, NULL}
-};
-
-static inline const char *
-symbolic(struct hfcusb_symbolic_list list[], const int num)
-{
-       int i;
-       for (i = 0; list[i].name != NULL; i++)
-               if (list[i].num == num)
-                       return list[i].name;
-       return "<unknown USB Error>";
-}
-
-/* USB descriptor need to contain one of the following EndPoint combination: */
-#define CNF_4INT3ISO   1       /* 4 INT IN, 3 ISO OUT */
-#define CNF_3INT3ISO   2       /* 3 INT IN, 3 ISO OUT */
-#define CNF_4ISO3ISO   3       /* 4 ISO IN, 3 ISO OUT */
-#define CNF_3ISO3ISO   4       /* 3 ISO IN, 3 ISO OUT */
-
-#define EP_NUL 1       /* Endpoint at this position not allowed */
-#define EP_NOP 2       /* all type of endpoints allowed at this position */
-#define EP_ISO 3       /* Isochron endpoint mandatory at this position */
-#define EP_BLK 4       /* Bulk endpoint mandatory at this position */
-#define EP_INT 5       /* Interrupt endpoint mandatory at this position */
-
-#define HFC_CHAN_B1    0
-#define HFC_CHAN_B2    1
-#define HFC_CHAN_D     2
-#define HFC_CHAN_E     3
-
-
-/*
- * List of all supported endpoint configuration sets, used to find the
- * best matching endpoint configuration within a device's USB descriptor.
- * We need at least 3 RX endpoints, and 3 TX endpoints, either
- * INT-in and ISO-out, or ISO-in and ISO-out)
- * with 4 RX endpoints even E-Channel logging is possible
- */
-static int
-validconf[][19] = {
-       /* INT in, ISO out config */
-       {EP_NUL, EP_INT, EP_NUL, EP_INT, EP_NUL, EP_INT, EP_NOP, EP_INT,
-        EP_ISO, EP_NUL, EP_ISO, EP_NUL, EP_ISO, EP_NUL, EP_NUL, EP_NUL,
-        CNF_4INT3ISO, 2, 1},
-       {EP_NUL, EP_INT, EP_NUL, EP_INT, EP_NUL, EP_INT, EP_NUL, EP_NUL,
-        EP_ISO, EP_NUL, EP_ISO, EP_NUL, EP_ISO, EP_NUL, EP_NUL, EP_NUL,
-        CNF_3INT3ISO, 2, 0},
-       /* ISO in, ISO out config */
-       {EP_NOP, EP_NOP, EP_NOP, EP_NOP, EP_NOP, EP_NOP, EP_NOP, EP_NOP,
-        EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_NOP, EP_ISO,
-        CNF_4ISO3ISO, 2, 1},
-       {EP_NUL, EP_NUL, EP_NUL, EP_NUL, EP_NUL, EP_NUL, EP_NUL, EP_NUL,
-        EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_NUL, EP_NUL,
-        CNF_3ISO3ISO, 2, 0},
-       {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} /* EOL element */
-};
-
-/* string description of chosen config */
-static char *conf_str[] = {
-       "4 Interrupt IN + 3 Isochron OUT",
-       "3 Interrupt IN + 3 Isochron OUT",
-       "4 Isochron IN + 3 Isochron OUT",
-       "3 Isochron IN + 3 Isochron OUT"
-};
-
-
-#define LED_OFF                0       /* no LED support */
-#define LED_SCHEME1    1       /* LED standard scheme */
-#define LED_SCHEME2    2       /* not used yet... */
-
-#define LED_POWER_ON   1
-#define LED_POWER_OFF  2
-#define LED_S0_ON      3
-#define LED_S0_OFF     4
-#define LED_B1_ON      5
-#define LED_B1_OFF     6
-#define LED_B1_DATA    7
-#define LED_B2_ON      8
-#define LED_B2_OFF     9
-#define LED_B2_DATA    10
-
-#define LED_NORMAL     0       /* LEDs are normal */
-#define LED_INVERTED   1       /* LEDs are inverted */
-
-/* time in ms to perform a Flashing LED when B-Channel has traffic */
-#define LED_TIME      250
-
-
-
-struct hfcsusb;
-struct usb_fifo;
-
-/* structure defining input+output fifos (interrupt/bulk mode) */
-struct iso_urb {
-       struct urb *urb;
-       __u8 buffer[ISO_BUFFER_SIZE];   /* buffer rx/tx USB URB data */
-       struct usb_fifo *owner_fifo;    /* pointer to owner fifo */
-       __u8 indx; /* Fifos's ISO double buffer 0 or 1 ? */
-#ifdef ISO_FRAME_START_DEBUG
-       int start_frames[ISO_FRAME_START_RING_COUNT];
-       __u8 iso_frm_strt_pos; /* index in start_frame[] */
-#endif
-};
-
-struct usb_fifo {
-       int fifonum;            /* fifo index attached to this structure */
-       int active;             /* fifo is currently active */
-       struct hfcsusb *hw;     /* pointer to main structure */
-       int pipe;               /* address of endpoint */
-       __u8 usb_packet_maxlen; /* maximum length for usb transfer */
-       unsigned int max_size;  /* maximum size of receive/send packet */
-       __u8 intervall;         /* interrupt interval */
-       struct urb *urb;        /* transfer structure for usb routines */
-       __u8 buffer[128];       /* buffer USB INT OUT URB data */
-       int bit_line;           /* how much bits are in the fifo? */
-
-       __u8 usb_transfer_mode; /* switched between ISO and INT */
-       struct iso_urb  iso[2]; /* two urbs to have one always
-                                  one pending */
-
-       struct dchannel *dch;   /* link to hfcsusb_t->dch */
-       struct bchannel *bch;   /* link to hfcsusb_t->bch */
-       struct dchannel *ech;   /* link to hfcsusb_t->ech, TODO: E-CHANNEL */
-       int last_urblen;        /* remember length of last packet */
-       __u8 stop_gracefull;    /* stops URB retransmission */
-};
-
-struct hfcsusb {
-       struct list_head        list;
-       struct dchannel         dch;
-       struct bchannel         bch[2];
-       struct dchannel         ech; /* TODO : wait for struct echannel ;) */
-
-       struct usb_device       *dev;           /* our device */
-       struct usb_interface    *intf;          /* used interface */
-       int                     if_used;        /* used interface number */
-       int                     alt_used;       /* used alternate config */
-       int                     cfg_used;       /* configuration index used */
-       int                     vend_idx;       /* index in hfcsusb_idtab */
-       int                     packet_size;
-       int                     iso_packet_size;
-       struct usb_fifo         fifos[HFCUSB_NUM_FIFOS];
-
-       /* control pipe background handling */
-       struct ctrl_buf         ctrl_buff[HFC_CTRL_BUFSIZE];
-       int                     ctrl_in_idx, ctrl_out_idx, ctrl_cnt;
-       struct urb              *ctrl_urb;
-       struct usb_ctrlrequest  ctrl_write;
-       struct usb_ctrlrequest  ctrl_read;
-       int                     ctrl_paksize;
-       int                     ctrl_in_pipe, ctrl_out_pipe;
-       spinlock_t              ctrl_lock; /* lock for ctrl */
-       spinlock_t              lock;
-
-       __u8                    threshold_mask;
-       __u8                    led_state;
-
-       __u8                    protocol;
-       int                     nt_timer;
-       int                     open;
-       __u8                    timers;
-       __u8                    initdone;
-       char                    name[MISDN_MAX_IDLEN];
-};
-
-/* private vendor specific data */
-struct hfcsusb_vdata {
-       __u8            led_scheme;  /* led display scheme */
-       signed short    led_bits[8]; /* array of 8 possible LED bitmask */
-       char            *vend_name;  /* device name */
-};
-
-
-#define HFC_MAX_TE_LAYER1_STATE 8
-#define HFC_MAX_NT_LAYER1_STATE 4
-
-static const char *HFC_TE_LAYER1_STATES[HFC_MAX_TE_LAYER1_STATE + 1] = {
-       "TE F0 - Reset",
-       "TE F1 - Reset",
-       "TE F2 - Sensing",
-       "TE F3 - Deactivated",
-       "TE F4 - Awaiting signal",
-       "TE F5 - Identifying input",
-       "TE F6 - Synchronized",
-       "TE F7 - Activated",
-       "TE F8 - Lost framing",
-};
-
-static const char *HFC_NT_LAYER1_STATES[HFC_MAX_NT_LAYER1_STATE + 1] = {
-       "NT G0 - Reset",
-       "NT G1 - Deactive",
-       "NT G2 - Pending activation",
-       "NT G3 - Active",
-       "NT G4 - Pending deactivation",
-};
-
-/* supported devices */
-static const struct usb_device_id hfcsusb_idtab[] = {
-       {
-               USB_DEVICE(0x0959, 0x2bd0),
-               .driver_info = (unsigned long) &((struct hfcsusb_vdata)
-                       {LED_OFF, {4, 0, 2, 1},
-                                       "ISDN USB TA (Cologne Chip HFC-S USB based)"}),
-       },
-       {
-               USB_DEVICE(0x0675, 0x1688),
-               .driver_info = (unsigned long) &((struct hfcsusb_vdata)
-                       {LED_SCHEME1, {1, 2, 0, 0},
-                                       "DrayTek miniVigor 128 USB ISDN TA"}),
-       },
-       {
-               USB_DEVICE(0x07b0, 0x0007),
-               .driver_info = (unsigned long) &((struct hfcsusb_vdata)
-                       {LED_SCHEME1, {0x80, -64, -32, -16},
-                                       "Billion tiny USB ISDN TA 128"}),
-       },
-       {
-               USB_DEVICE(0x0742, 0x2008),
-               .driver_info = (unsigned long) &((struct hfcsusb_vdata)
-                       {LED_SCHEME1, {4, 0, 2, 1},
-                                       "Stollmann USB TA"}),
-       },
-       {
-               USB_DEVICE(0x0742, 0x2009),
-               .driver_info = (unsigned long) &((struct hfcsusb_vdata)
-                       {LED_SCHEME1, {4, 0, 2, 1},
-                                       "Aceex USB ISDN TA"}),
-       },
-       {
-               USB_DEVICE(0x0742, 0x200A),
-               .driver_info = (unsigned long) &((struct hfcsusb_vdata)
-                       {LED_SCHEME1, {4, 0, 2, 1},
-                                       "OEM USB ISDN TA"}),
-       },
-       {
-               USB_DEVICE(0x08e3, 0x0301),
-               .driver_info = (unsigned long) &((struct hfcsusb_vdata)
-                       {LED_SCHEME1, {2, 0, 1, 4},
-                                       "Olitec USB RNIS"}),
-       },
-       {
-               USB_DEVICE(0x07fa, 0x0846),
-               .driver_info = (unsigned long) &((struct hfcsusb_vdata)
-                       {LED_SCHEME1, {0x80, -64, -32, -16},
-                                       "Bewan Modem RNIS USB"}),
-       },
-       {
-               USB_DEVICE(0x07fa, 0x0847),
-               .driver_info = (unsigned long) &((struct hfcsusb_vdata)
-                       {LED_SCHEME1, {0x80, -64, -32, -16},
-                                       "Djinn Numeris USB"}),
-       },
-       {
-               USB_DEVICE(0x07b0, 0x0006),
-               .driver_info = (unsigned long) &((struct hfcsusb_vdata)
-                       {LED_SCHEME1, {0x80, -64, -32, -16},
-                                       "Twister ISDN TA"}),
-       },
-       {
-               USB_DEVICE(0x071d, 0x1005),
-               .driver_info = (unsigned long) &((struct hfcsusb_vdata)
-                       {LED_SCHEME1, {0x02, 0, 0x01, 0x04},
-                                       "Eicon DIVA USB 4.0"}),
-       },
-       {
-               USB_DEVICE(0x0586, 0x0102),
-               .driver_info = (unsigned long) &((struct hfcsusb_vdata)
-                       {LED_SCHEME1, {0x88, -64, -32, -16},
-                                       "ZyXEL OMNI.NET USB II"}),
-       },
-       {
-               USB_DEVICE(0x1ae7, 0x0525),
-               .driver_info = (unsigned long) &((struct hfcsusb_vdata)
-                       {LED_SCHEME1, {0x88, -64, -32, -16},
-                                       "X-Tensions USB ISDN TA XC-525"}),
-       },
-       { }
-};
-
[… more lines in the raw message]

Lines of this file are not shown. View the raw message.

drivers/isdn/hardware/mISDN/iohelper.h deleted +0 -96
deleted file mode 100644
index c81f7aba4b57..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/hardware/mISDN/ipac.h deleted +0 -393
deleted file mode 100644
index 2f0c4978a7a5..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/hardware/mISDN/isar.h deleted +0 -256
deleted file mode 100644
index 36a9fa564b17..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/hardware/mISDN/isdnhdlc.h deleted +0 -69
deleted file mode 100644
index fe2c1279c139..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/hardware/mISDN/netjet.h deleted +0 -44
deleted file mode 100644
index b23ad9f6d4d0..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/hardware/mISDN/w6692.h deleted +0 -177
deleted file mode 100644
index 45e1dc5d6c2d..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/mISDN/core.h deleted +0 -69
deleted file mode 100644
index 5617c06de8e4..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/mISDN/dsp.h deleted +0 -277
deleted file mode 100644
index baf31258f5c9..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/mISDN/dsp_biquad.h deleted +0 -51
deleted file mode 100644
index f40d52a4c4ee..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/mISDN/dsp_ecdis.h deleted +0 -96
deleted file mode 100644
index 4bcdf321875d..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/mISDN/dsp_hwec.h deleted +0 -10
deleted file mode 100644
index c9cb0ea249da..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/mISDN/fsm.h deleted +0 -58
deleted file mode 100644
index 211554b997f8..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/mISDN/l1oip.h deleted +0 -92
deleted file mode 100644
index 48133d022812..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/mISDN/layer1.h deleted +0 -16
deleted file mode 100644
index f03e86450daf..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/mISDN/layer2.h deleted +0 -131
deleted file mode 100644
index c466fd94aa02..000000000000

Lines of this file are not shown. View the raw message.

include/linux/isdn/capilli.h deleted +0 -95
deleted file mode 100644
index 12be09b6883b..000000000000

Lines of this file are not shown. View the raw message.

include/linux/isdn/capiutil.h deleted +0 -60
deleted file mode 100644
index 953fd500dff7..000000000000

Lines of this file are not shown. View the raw message.

include/linux/kernelcapi.h deleted +0 -45
deleted file mode 100644
index 94ba42bf9da1..000000000000

Lines of this file are not shown. View the raw message.

include/linux/mISDNdsp.h deleted +0 -40
deleted file mode 100644
index 00758f45fddc..000000000000

Lines of this file are not shown. View the raw message.

include/linux/mISDNhw.h deleted +0 -192
deleted file mode 100644
index ef4f8eb02eac..000000000000

Lines of this file are not shown. View the raw message.

include/linux/mISDNif.h deleted +0 -603
deleted file mode 100644
index 7aab4a769736..000000000000

Lines of this file are not shown. View the raw message.

include/uapi/linux/capi.h deleted +0 -134
deleted file mode 100644
index 31f946f8a88d..000000000000

Lines of this file are not shown. View the raw message.

include/uapi/linux/isdn/capicmd.h deleted +0 -117
deleted file mode 100644
index 5ec88e7548a9..000000000000

Lines of this file are not shown. View the raw message.

include/uapi/linux/kernelcapi.h deleted +0 -48
deleted file mode 100644
index 325a856e0e20..000000000000

Lines of this file are not shown. View the raw message.

net/bluetooth/cmtp/cmtp.h deleted +0 -129
deleted file mode 100644
index f6b9dc4e408f..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/capi/capi.c deleted +0 -1435
deleted file mode 100644
index aa28b1d32c4e..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/capi/capiutil.c deleted +0 -677
deleted file mode 100644
index eec9b36343b7..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/capi/kcapi.c deleted +0 -933
deleted file mode 100644
index f9fa17d68095..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/capi/kcapi_proc.c deleted +0 -231
deleted file mode 100644
index 77e951206809..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/hardware/mISDN/avmfritz.c deleted +0 -1164
deleted file mode 100644
index 55e0b9efa194..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/hardware/mISDN/hfcmulti.c deleted +0 -5540
deleted file mode 100644
index b3d28976b33a..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/hardware/mISDN/hfcpci.c deleted +0 -2360
deleted file mode 100644
index 554a1c640321..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/hardware/mISDN/hfcsusb.c deleted +0 -2157
deleted file mode 100644
index 227babe83879..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/hardware/mISDN/isdnhdlc.c deleted +0 -617
deleted file mode 100644
index 985367e6711d..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/hardware/mISDN/mISDNinfineon.c deleted +0 -1168
deleted file mode 100644
index aaa639ad5526..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/hardware/mISDN/mISDNipac.c deleted +0 -1636
deleted file mode 100644
index a34ea6058960..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/hardware/mISDN/mISDNisar.c deleted +0 -1694
deleted file mode 100644
index dace91ba412b..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/hardware/mISDN/netjet.c deleted +0 -1154
deleted file mode 100644
index 8d740d8eacec..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/hardware/mISDN/speedfax.c deleted +0 -520
deleted file mode 100644
index ab24c3c460e6..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/hardware/mISDN/w6692.c deleted +0 -1417
deleted file mode 100644
index a341470c042f..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/mISDN/clock.c deleted +0 -197
deleted file mode 100644
index 2668be9de20a..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/mISDN/core.c deleted +0 -400
deleted file mode 100644
index 8ec2d4d4f135..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/mISDN/dsp_audio.c deleted +0 -421
deleted file mode 100644
index bbef98e7a16e..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/mISDN/dsp_blowfish.c deleted +0 -667
deleted file mode 100644
index 0e77c282c862..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/mISDN/dsp_cmx.c deleted +0 -1949
deleted file mode 100644
index d5eb2349c414..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/mISDN/dsp_core.c deleted +0 -1227
deleted file mode 100644
index d0aa415a6b09..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/mISDN/dsp_dtmf.c deleted +0 -313
deleted file mode 100644
index 642f30be5ce2..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/mISDN/dsp_hwec.c deleted +0 -122
deleted file mode 100644
index 0cd216e28f00..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/mISDN/dsp_pipeline.c deleted +0 -300
deleted file mode 100644
index 55693dc7206b..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/mISDN/dsp_tones.c deleted +0 -550
deleted file mode 100644
index fa7813ae8d97..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/mISDN/fsm.c deleted +0 -176
deleted file mode 100644
index 825b686496d2..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/mISDN/hwchannel.c deleted +0 -516
deleted file mode 100644
index 8c93af06ed02..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/mISDN/l1oip_codec.c deleted +0 -358
deleted file mode 100644
index 1059234fbc67..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/mISDN/l1oip_core.c deleted +0 -1505
deleted file mode 100644
index 6866a0d6b382..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/mISDN/layer1.c deleted +0 -415
deleted file mode 100644
index 3fbc170acf9a..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/mISDN/layer2.c deleted +0 -2266
deleted file mode 100644
index b75869c9f78f..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/mISDN/socket.c deleted +0 -825
deleted file mode 100644
index 77b900db1cac..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/mISDN/stack.c deleted +0 -654
deleted file mode 100644
index 4e96684af0aa..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/mISDN/tei.c deleted +0 -1416
deleted file mode 100644
index 2bad3083be90..000000000000

Lines of this file are not shown. View the raw message.

drivers/isdn/mISDN/timerdev.c deleted +0 -295
deleted file mode 100644
index a18845755633..000000000000

Lines of this file are not shown. View the raw message.

net/bluetooth/cmtp/capi.c deleted +0 -579
deleted file mode 100644
index b95413bffa16..000000000000

Lines of this file are not shown. View the raw message.

net/bluetooth/cmtp/core.c deleted +0 -519
deleted file mode 100644
index 261aeeda3236..000000000000

Lines of this file are not shown. View the raw message.

net/bluetooth/cmtp/sock.c deleted +0 -271
deleted file mode 100644
index 96d49d9fae96..000000000000

Lines of this file are not shown. View the raw message.

CREDITS +5 -1
index a03b00452a1e..eeeece8ed868 100644

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

Quoted 2 lines

2.53.0

Signature · 1 line
Luiz Augusto von Dentz

Part of the diff is not shown here. View the raw message.

reviewer Reviewed-by on v1 1/1
#6 lore raw
In reply to Jakub Kicinski
Quoted 13 lines · Jakub Kicinski

Remove the ISDN (mISDN, CAPI) subsystem and Bluetooth CMTP protocol from the kernel tree.

ISDN is a pretty old technology and it's unclear whether anyone still uses it. I went over the last few years of git history and all the commits are either tree-wide conversions or syzbot/static analyzer fixes.

When we discussed removal in the past IIRC there were some concerns about ISDN still being used in parts of Germany. Unfortunately, the code base is quite old, none of the current maintainers are familiar with it and AI tools will have a field day finding bugs here.

Quoted 8 lines

Delete this code and preserve it in an out-of-tree repository for any remaining users:
https://github.com/linux-netdev/mod-orphan

UAPI constants AF_ISDN/PF_ISDN and the SELinux isdn_socket class are preserved for ABI stability, but the rest of uAPI is removed.

#7 lore raw
In reply to Jakub Kicinski
This patch was applied to netdev/net.git (main) by Jakub Kicinski <[email protected]>:

Hello:

This patch was applied to netdev/net.git (main)
by Jakub Kicinski <[email protected]>:

Quoted 9 lines · On Mon, 20 Apr 2026 19:21:07 -0700 you wrote:

Remove the ISDN (mISDN, CAPI) subsystem and Bluetooth CMTP protocol from the kernel tree.

ISDN is a pretty old technology and it's unclear whether anyone still uses it. I went over the last few years of git history and all the commits are either tree-wide conversions or syzbot/static analyzer fixes.

[...]

Here is the summary with links:
- [net-deletions] net: remove ISDN subsystem and Bluetooth CMTP

    https://git.kernel.org/netdev/net/c/4f10f1dfb235

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
#8 lore raw
In reply to Jakub Kicinski
This patch was applied to bluetooth/bluetooth-next.git (master) by Jakub Kicinski <[email protected]>:

Hello:

This patch was applied to bluetooth/bluetooth-next.git (master) by Jakub Kicinski <[email protected]>:

Quoted 9 lines · On Mon, 20 Apr 2026 19:21:07 -0700 you wrote:

Remove the ISDN (mISDN, CAPI) subsystem and Bluetooth CMTP protocol from the kernel tree.

ISDN is a pretty old technology and it's unclear whether anyone still uses it. I went over the last few years of git history and all the commits are either tree-wide conversions or syzbot/static analyzer fixes.

[...]

Here is the summary with links:
- [net-deletions] net: remove ISDN subsystem and Bluetooth CMTP

    https://git.kernel.org/bluetooth/bluetooth-next/c/4f10f1dfb235

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html