Skip to contentSkip to conversation

tcp: fix listener wakeup after reuseport migration

PATCH Applied Zhenzhong Wu 5 participants 9 messages Apr 22 – Apr 23

Subsystems (7)
lore
Share & tools
lore
#0 lore raw

v4 cover tcp: fix listener wakeup after reuseport migration

This series fixes a missing wakeup when inet_csk_listen_stop() migrates an established child socket from a closing listener to another socket in the same SO_REUSEPORT group after the child has already been queued for accept.

The target listener receives the migrated accept-queue entry via inet_csk_reqsk_queue_add(), but its waiters are not notified. Nonblocking accept() still succeeds because it checks the accept queue directly, but readiness-based waiters can remain asleep until another connection generates a wakeup.

Patch 1 notifies the target listener after a successful migration in inet_csk_listen_stop() and protects the post-queue_add() nsk accesses with rcu_read_lock()/rcu_read_unlock().

Patch 2 extends the existing migrate_reuseport BPF selftest with epoll readiness checks inside migrate_dance(), around shutdown() where the migration happens. The test now verifies that the target listener is not ready before migration and becomes ready immediately after it, for both TCP_ESTABLISHED and TCP_SYN_RECV. TCP_NEW_SYN_RECV remains excluded because it still depends on later handshake completion.

Testing:
- On a local unpatched kernel, the focused migrate_reuseport test fails for the listener-migration cases and passes for the TCP_NEW_SYN_RECV cases:
not ok 1 IPv4 TCP_ESTABLISHED inet_csk_listen_stop
not ok 2 IPv4 TCP_SYN_RECV inet_csk_listen_stop
ok 3 IPv4 TCP_NEW_SYN_RECV reqsk_timer_handler
ok 4 IPv4 TCP_NEW_SYN_RECV inet_csk_complete_hashdance not ok 5 IPv6 TCP_ESTABLISHED inet_csk_listen_stop
not ok 6 IPv6 TCP_SYN_RECV inet_csk_listen_stop
ok 7 IPv6 TCP_NEW_SYN_RECV reqsk_timer_handler
ok 8 IPv6 TCP_NEW_SYN_RECV inet_csk_complete_hashdance
- On a patched kernel booted under QEMU, the full migrate_reuseport selftest passes:
ok 1 IPv4 TCP_ESTABLISHED inet_csk_listen_stop
ok 2 IPv4 TCP_SYN_RECV inet_csk_listen_stop
ok 3 IPv4 TCP_NEW_SYN_RECV reqsk_timer_handler
ok 4 IPv4 TCP_NEW_SYN_RECV inet_csk_complete_hashdance ok 5 IPv6 TCP_ESTABLISHED inet_csk_listen_stop
ok 6 IPv6 TCP_SYN_RECV inet_csk_listen_stop
ok 7 IPv6 TCP_NEW_SYN_RECV reqsk_timer_handler
ok 8 IPv6 TCP_NEW_SYN_RECV inet_csk_complete_hashdance SELFTEST_RC=0

---

v4:
- fix patch 2 to route shutdown() failures through the epoll cleanup path
- guard patch 2's epoll cleanup when no epoll fd was created

v3:
https://lore.kernel.org/netdev/[email protected]/

v2:
https://lore.kernel.org/netdev/[email protected]/

v1:
https://lore.kernel.org/netdev/[email protected]/

Zhenzhong Wu (2):
tcp: call sk_data_ready() after listener migration selftests/bpf: check epoll readiness during reuseport migration

 net/ipv4/inet_connection_sock.c               |  3 ++
 .../bpf/prog_tests/migrate_reuseport.c        | 49 ++++++++++++++++---
 2 files changed, 45 insertions(+), 7 deletions(-)

base-commit: 52bcb57a4e8a0865a76c587c2451906342ae1b2d

Signature · 1 line
2.43.0
#1 lore raw

PATCH v4 1/2 tcp: call sk_data_ready() after listener migration

When inet_csk_listen_stop() migrates an established child socket from a closing listener to another socket in the same SO_REUSEPORT group, the target listener gets a new accept-queue entry via inet_csk_reqsk_queue_add(), but that path never notifies the target listener's waiters. A nonblocking accept() still works because it checks the queue directly, but poll()/epoll_wait() waiters and blocking accept() callers can also remain asleep indefinitely.

Call READ_ONCE(nsk->sk_data_ready)(nsk) after a successful migration in inet_csk_listen_stop().

However, after inet_csk_reqsk_queue_add() succeeds, the ref acquired in reuseport_migrate_sock() is effectively transferred to nreq->rsk_listener. Another CPU can then dequeue nreq via accept() or listener shutdown, hit reqsk_put(), and drop that listener ref. Since listeners are SOCK_RCU_FREE, wrap the post-queue_add() dereferences of nsk in rcu_read_lock()/rcu_read_unlock(), which also covers the existing sock_net(nsk) access in that path.

The reqsk_timer_handler() path does not need the same changes for two
reasons: half-open requests become readable only after the final ACK, where tcp_child_process() already wakes the listener; and once nreq is visible via inet_ehash_insert(), the success path no longer touches nsk directly.

Fixes 54b92e841937 ("tcp: Migrate TCP_ESTABLISHED/TCP_SYN_RECV sockets in accept queues.")
---
 net/ipv4/inet_connection_sock.c | 3 +++
 1 file changed, 3 insertions(+)
net/ipv4/inet_connection_sock.c +3 -0
index 4ac3ae1bc..928654c34 100644
@@ -1479,16 +1479,19 @@ void inet_csk_listen_stop(struct sock *sk)
 			if (nreq) {
 				refcount_set(&nreq->rsk_refcnt, 1);
 
+				rcu_read_lock();
 				if (inet_csk_reqsk_queue_add(nsk, nreq, child)) {
 					__NET_INC_STATS(sock_net(nsk),
 							LINUX_MIB_TCPMIGRATEREQSUCCESS);
 					reqsk_migrate_reset(req);
+					READ_ONCE(nsk->sk_data_ready)(nsk);
 				} else {
 					__NET_INC_STATS(sock_net(nsk),
 							LINUX_MIB_TCPMIGRATEREQFAILURE);
 					reqsk_migrate_reset(nreq);
 					__reqsk_free(nreq);
 				}
+				rcu_read_unlock();
 
 				/* inet_csk_reqsk_queue_add() has already
 				 * called inet_child_forget() on failure case.
Signature · 1 line
2.43.0
Reviewed-by on v4 1/2
#2 lore raw

Re: [PATCH net v4 1/2] tcp: call sk_data_ready() after listener migration

Quoted 26 lines · Zhenzhong Wu

When inet_csk_listen_stop() migrates an established child socket from a closing listener to another socket in the same SO_REUSEPORT group, the target listener gets a new accept-queue entry via inet_csk_reqsk_queue_add(), but that path never notifies the target listener's waiters. A nonblocking accept() still works because it checks the queue directly, but poll()/epoll_wait() waiters and blocking accept() callers can also remain asleep indefinitely.

Call READ_ONCE(nsk->sk_data_ready)(nsk) after a successful migration in inet_csk_listen_stop().

However, after inet_csk_reqsk_queue_add() succeeds, the ref acquired in reuseport_migrate_sock() is effectively transferred to nreq->rsk_listener. Another CPU can then dequeue nreq via accept() or listener shutdown, hit reqsk_put(), and drop that listener ref. Since listeners are SOCK_RCU_FREE, wrap the post-queue_add() dereferences of nsk in rcu_read_lock()/rcu_read_unlock(), which also covers the existing sock_net(nsk) access in that path.

The reqsk_timer_handler() path does not need the same changes for two
reasons: half-open requests become readable only after the final ACK, where tcp_child_process() already wakes the listener; and once nreq is visible via inet_ehash_insert(), the success path no longer touches nsk directly.

Quoted 5 lines
Fixes 54b92e841937 ("tcp: Migrate TCP_ESTABLISHED/TCP_SYN_RECV sockets in accept queues.")
#3 lore raw

PATCH v4 2/2 selftests/bpf: check epoll readiness during reuseport migration

In reply to Zhenzhong Wu

Inside migrate_dance(), add epoll checks around shutdown() to verify that the target listener is not ready before shutdown() and becomes ready immediately after shutdown() triggers migration.

Cover TCP_ESTABLISHED and TCP_SYN_RECV. Exclude TCP_NEW_SYN_RECV as it depends on later handshake completion.

---
 .../bpf/prog_tests/migrate_reuseport.c        | 49 ++++++++++++++++---
 1 file changed, 42 insertions(+), 7 deletions(-)
tools/testing/selftests/bpf/prog_tests/migrate_reuseport.c +42 -7
index 653b0a20f..c62907732 100644
@@ -7,24 +7,29 @@
  *   3. call listen() for 1 server socket. (migration target)
  *   4. update a map to migrate all child sockets
  *        to the last server socket (migrate_map[cookie] = 4)
- *   5. call shutdown() for first 4 server sockets
+ *   5. for TCP_ESTABLISHED and TCP_SYN_RECV cases, verify via epoll
+ *        that the last server socket is not ready before migration.
+ *   6. call shutdown() for first 4 server sockets
  *        and migrate the requests in the accept queue
  *        to the last server socket.
- *   6. call listen() for the second server socket.
- *   7. call shutdown() for the last server
+ *   7. for TCP_ESTABLISHED and TCP_SYN_RECV cases, verify via epoll
+ *        that the last server socket is ready after migration.
+ *   8. call listen() for the second server socket.
+ *   9. call shutdown() for the last server
  *        and migrate the requests in the accept queue
  *        to the second server socket.
- *   8. call listen() for the last server.
- *   9. call shutdown() for the second server
+ *  10. call listen() for the last server.
+ *  11. call shutdown() for the second server
  *        and migrate the requests in the accept queue
  *        to the last server socket.
- *  10. call accept() for the last server socket.
+ *  12. call accept() for the last server socket.
  *
  * Author: Kuniyuki Iwashima <[email protected]>
  */
 
 #include <bpf/bpf.h>
 #include <bpf/libbpf.h>
+#include <sys/epoll.h>
 
 #include "test_progs.h"
 #include "test_migrate_reuseport.skel.h"
@@ -350,21 +355,51 @@ static int update_maps(struct migrate_reuseport_test_case *test_case,
 
 static int migrate_dance(struct migrate_reuseport_test_case *test_case)
 {
+	struct epoll_event ev = {
+		.events = EPOLLIN,
+	};
+	int epoll = -1, nfds;
 	int i, err;
 
+	if (test_case->state != BPF_TCP_NEW_SYN_RECV) {
+		epoll = epoll_create1(0);
+		if (!ASSERT_NEQ(epoll, -1, "epoll_create1"))
+			return -1;
+
+		ev.data.fd = test_case->servers[MIGRATED_TO];
+		if (!ASSERT_OK(epoll_ctl(epoll, EPOLL_CTL_ADD,
+					 test_case->servers[MIGRATED_TO], &ev),
+			       "epoll_ctl"))
+			goto close_epoll;
+
+		nfds = epoll_wait(epoll, &ev, 1, 0);
+		if (!ASSERT_EQ(nfds, 0, "epoll_wait 1"))
+			goto close_epoll;
+	}
+
 	/* Migrate TCP_ESTABLISHED and TCP_SYN_RECV requests
 	 * to the last listener based on eBPF.
 	 */
 	for (i = 0; i < MIGRATED_TO; i++) {
 		err = shutdown(test_case->servers[i], SHUT_RDWR);
 		if (!ASSERT_OK(err, "shutdown"))
-			return -1;
+			goto close_epoll;
 	}
 
 	/* No dance for TCP_NEW_SYN_RECV to migrate based on eBPF */
 	if (test_case->state == BPF_TCP_NEW_SYN_RECV)
 		return 0;
 
+	nfds = epoll_wait(epoll, &ev, 1, 0);
+	if (!ASSERT_EQ(nfds, 1, "epoll_wait 2")) {
+close_epoll:
+		if (epoll >= 0)
+			close(epoll);
+		return -1;
+	}
+
+	close(epoll);
+
 	/* Note that we use the second listener instead of the
 	 * first one here.
 	 *
Signature · 1 line
2.43.0
#4 lore raw

Re: [PATCH net v4 2/2] selftests/bpf: check epoll readiness during reuseport migration

Quoted 92 lines · Zhenzhong Wu

Inside migrate_dance(), add epoll checks around shutdown() to verify that the target listener is not ready before shutdown() and becomes ready immediately after shutdown() triggers migration.

Cover TCP_ESTABLISHED and TCP_SYN_RECV. Exclude TCP_NEW_SYN_RECV as it depends on later handshake completion.

---
 .../bpf/prog_tests/migrate_reuseport.c        | 49 ++++++++++++++++---
 1 file changed, 42 insertions(+), 7 deletions(-)
tools/testing/selftests/bpf/prog_tests/migrate_reuseport.c +32 -7
index 653b0a20f..c62907732 100644
@@ -7,24 +7,29 @@
  *   3. call listen() for 1 server socket. (migration target)
  *   4. update a map to migrate all child sockets
  *        to the last server socket (migrate_map[cookie] = 4)
- *   5. call shutdown() for first 4 server sockets
+ *   5. for TCP_ESTABLISHED and TCP_SYN_RECV cases, verify via epoll
+ *        that the last server socket is not ready before migration.
+ *   6. call shutdown() for first 4 server sockets
  *        and migrate the requests in the accept queue
  *        to the last server socket.
- *   6. call listen() for the second server socket.
- *   7. call shutdown() for the last server
+ *   7. for TCP_ESTABLISHED and TCP_SYN_RECV cases, verify via epoll
+ *        that the last server socket is ready after migration.
+ *   8. call listen() for the second server socket.
+ *   9. call shutdown() for the last server
  *        and migrate the requests in the accept queue
  *        to the second server socket.
- *   8. call listen() for the last server.
- *   9. call shutdown() for the second server
+ *  10. call listen() for the last server.
+ *  11. call shutdown() for the second server
  *        and migrate the requests in the accept queue
  *        to the last server socket.
- *  10. call accept() for the last server socket.
+ *  12. call accept() for the last server socket.
  *
  * Author: Kuniyuki Iwashima <[email protected]>
  */
 
 #include <bpf/bpf.h>
 #include <bpf/libbpf.h>
+#include <sys/epoll.h>
 
 #include "test_progs.h"
 #include "test_migrate_reuseport.skel.h"
@@ -350,21 +355,51 @@ static int update_maps(struct migrate_reuseport_test_case *test_case,
 
 static int migrate_dance(struct migrate_reuseport_test_case *test_case)
 {
+       struct epoll_event ev = {
+               .events = EPOLLIN,
+       };
+       int epoll = -1, nfds;
        int i, err;
 
+       if (test_case->state != BPF_TCP_NEW_SYN_RECV) {
+               epoll = epoll_create1(0);
+               if (!ASSERT_NEQ(epoll, -1, "epoll_create1"))
+                       return -1;
+
+               ev.data.fd = test_case->servers[MIGRATED_TO];
+               if (!ASSERT_OK(epoll_ctl(epoll, EPOLL_CTL_ADD,
+                                        test_case->servers[MIGRATED_TO], &ev),
+                              "epoll_ctl"))
+                       goto close_epoll;
+
+               nfds = epoll_wait(epoll, &ev, 1, 0);
+               if (!ASSERT_EQ(nfds, 0, "epoll_wait 1"))
+                       goto close_epoll;
+       }
+
        /* Migrate TCP_ESTABLISHED and TCP_SYN_RECV requests
         * to the last listener based on eBPF.
         */
        for (i = 0; i < MIGRATED_TO; i++) {
                err = shutdown(test_case->servers[i], SHUT_RDWR);
                if (!ASSERT_OK(err, "shutdown"))
-                       return -1;
+                       goto close_epoll;
        }
 
        /* No dance for TCP_NEW_SYN_RECV to migrate based on eBPF */

tools/testing/selftests/bpf/prog_tests/migrate_reuseport.c static int update_maps(struct migrate_reuseport_test_case *test_case, · line 399

Quoted 10 lines
tools/testing/selftests/bpf/prog_tests/migrate_reuseport.c +7 -0
        if (test_case->state == BPF_TCP_NEW_SYN_RECV)
                return 0;
 
+       nfds = epoll_wait(epoll, &ev, 1, 0);
+       if (!ASSERT_EQ(nfds, 1, "epoll_wait 2")) {
+close_epoll:
+               if (epoll >= 0)
+                       close(epoll);
+               return -1;
+       }

I think you can avoid this goto using __attribute__((cleanup(...)):

  static void close_fd(int *fd)
  {
        if (*fd >= 0)
                close(*fd);
  }

  #define __close_fd __attribute__((cleanup(close_fd)))

then in the test:

__close_fd int epoll = -1;

there's an example of this in tools/testing/selftests/bpf/prog_tests/socket_helpers.h.

#5 lore raw

Re: [PATCH net v4 2/2] selftests/bpf: check epoll readiness during reuseport migration

Thanks Tamir, I will fold this into v5 - there's already a precedent in socket_helpers.h, so I will just include it from there.

Quoted 121 lines · Tamir Duberstein
Quoted 92 lines · Zhenzhong Wu

Inside migrate_dance(), add epoll checks around shutdown() to verify that the target listener is not ready before shutdown() and becomes ready immediately after shutdown() triggers migration.

Cover TCP_ESTABLISHED and TCP_SYN_RECV. Exclude TCP_NEW_SYN_RECV as it depends on later handshake completion.

---
 .../bpf/prog_tests/migrate_reuseport.c        | 49 ++++++++++++++++---
 1 file changed, 42 insertions(+), 7 deletions(-)
tools/testing/selftests/bpf/prog_tests/migrate_reuseport.c +32 -7
index 653b0a20f..c62907732 100644
@@ -7,24 +7,29 @@
  *   3. call listen() for 1 server socket. (migration target)
  *   4. update a map to migrate all child sockets
  *        to the last server socket (migrate_map[cookie] = 4)
- *   5. call shutdown() for first 4 server sockets
+ *   5. for TCP_ESTABLISHED and TCP_SYN_RECV cases, verify via epoll
+ *        that the last server socket is not ready before migration.
+ *   6. call shutdown() for first 4 server sockets
  *        and migrate the requests in the accept queue
  *        to the last server socket.
- *   6. call listen() for the second server socket.
- *   7. call shutdown() for the last server
+ *   7. for TCP_ESTABLISHED and TCP_SYN_RECV cases, verify via epoll
+ *        that the last server socket is ready after migration.
+ *   8. call listen() for the second server socket.
+ *   9. call shutdown() for the last server
  *        and migrate the requests in the accept queue
  *        to the second server socket.
- *   8. call listen() for the last server.
- *   9. call shutdown() for the second server
+ *  10. call listen() for the last server.
+ *  11. call shutdown() for the second server
  *        and migrate the requests in the accept queue
  *        to the last server socket.
- *  10. call accept() for the last server socket.
+ *  12. call accept() for the last server socket.
  *
  * Author: Kuniyuki Iwashima <[email protected]>
  */
 
 #include <bpf/bpf.h>
 #include <bpf/libbpf.h>
+#include <sys/epoll.h>
 
 #include "test_progs.h"
 #include "test_migrate_reuseport.skel.h"
@@ -350,21 +355,51 @@ static int update_maps(struct migrate_reuseport_test_case *test_case,
 
 static int migrate_dance(struct migrate_reuseport_test_case *test_case)
 {
+       struct epoll_event ev = {
+               .events = EPOLLIN,
+       };
+       int epoll = -1, nfds;
        int i, err;
 
+       if (test_case->state != BPF_TCP_NEW_SYN_RECV) {
+               epoll = epoll_create1(0);
+               if (!ASSERT_NEQ(epoll, -1, "epoll_create1"))
+                       return -1;
+
+               ev.data.fd = test_case->servers[MIGRATED_TO];
+               if (!ASSERT_OK(epoll_ctl(epoll, EPOLL_CTL_ADD,
+                                        test_case->servers[MIGRATED_TO], &ev),
+                              "epoll_ctl"))
+                       goto close_epoll;
+
+               nfds = epoll_wait(epoll, &ev, 1, 0);
+               if (!ASSERT_EQ(nfds, 0, "epoll_wait 1"))
+                       goto close_epoll;
+       }
+
        /* Migrate TCP_ESTABLISHED and TCP_SYN_RECV requests
         * to the last listener based on eBPF.
         */
        for (i = 0; i < MIGRATED_TO; i++) {
                err = shutdown(test_case->servers[i], SHUT_RDWR);
                if (!ASSERT_OK(err, "shutdown"))
-                       return -1;
+                       goto close_epoll;
        }
 
        /* No dance for TCP_NEW_SYN_RECV to migrate based on eBPF */

tools/testing/selftests/bpf/prog_tests/migrate_reuseport.c static int update_maps(struct migrate_reuseport_test_case *test_case, · line 399

Quoted 10 lines
tools/testing/selftests/bpf/prog_tests/migrate_reuseport.c +7 -0
        if (test_case->state == BPF_TCP_NEW_SYN_RECV)
                return 0;
 
+       nfds = epoll_wait(epoll, &ev, 1, 0);
+       if (!ASSERT_EQ(nfds, 1, "epoll_wait 2")) {
+close_epoll:
+               if (epoll >= 0)
+                       close(epoll);
+               return -1;
+       }

I think you can avoid this goto using __attribute__((cleanup(...)):

  static void close_fd(int *fd)
  {
        if (*fd >= 0)
                close(*fd);
  }

  #define __close_fd __attribute__((cleanup(close_fd)))

then in the test:

__close_fd int epoll = -1;

there's an example of this in tools/testing/selftests/bpf/prog_tests/socket_helpers.h.

#6 lore raw

Re: [PATCH net v4 2/2] selftests/bpf: check epoll readiness during reuseport migration

Quoted 3 lines · Zhenzhong Wu

Thanks Tamir, I will fold this into v5 - there's already a precedent in socket_helpers.h, so I will just include it from there.

The test does not use cleanup in other places,
no need to mix them up.

Quoted 123 lines · Tamir Duberstein
Quoted 121 lines · Zhenzhong Wu
Quoted 92 lines

Inside migrate_dance(), add epoll checks around shutdown() to verify that the target listener is not ready before shutdown() and becomes ready immediately after shutdown() triggers migration.

Cover TCP_ESTABLISHED and TCP_SYN_RECV. Exclude TCP_NEW_SYN_RECV as it depends on later handshake completion.

---
 .../bpf/prog_tests/migrate_reuseport.c        | 49 ++++++++++++++++---
 1 file changed, 42 insertions(+), 7 deletions(-)
tools/testing/selftests/bpf/prog_tests/migrate_reuseport.c +32 -7
index 653b0a20f..c62907732 100644
@@ -7,24 +7,29 @@
  *   3. call listen() for 1 server socket. (migration target)
  *   4. update a map to migrate all child sockets
  *        to the last server socket (migrate_map[cookie] = 4)
- *   5. call shutdown() for first 4 server sockets
+ *   5. for TCP_ESTABLISHED and TCP_SYN_RECV cases, verify via epoll
+ *        that the last server socket is not ready before migration.
+ *   6. call shutdown() for first 4 server sockets
  *        and migrate the requests in the accept queue
  *        to the last server socket.
- *   6. call listen() for the second server socket.
- *   7. call shutdown() for the last server
+ *   7. for TCP_ESTABLISHED and TCP_SYN_RECV cases, verify via epoll
+ *        that the last server socket is ready after migration.
+ *   8. call listen() for the second server socket.
+ *   9. call shutdown() for the last server
  *        and migrate the requests in the accept queue
  *        to the second server socket.
- *   8. call listen() for the last server.
- *   9. call shutdown() for the second server
+ *  10. call listen() for the last server.
+ *  11. call shutdown() for the second server
  *        and migrate the requests in the accept queue
  *        to the last server socket.
- *  10. call accept() for the last server socket.
+ *  12. call accept() for the last server socket.
  *
  * Author: Kuniyuki Iwashima <[email protected]>
  */
 
 #include <bpf/bpf.h>
 #include <bpf/libbpf.h>
+#include <sys/epoll.h>
 
 #include "test_progs.h"
 #include "test_migrate_reuseport.skel.h"
@@ -350,21 +355,51 @@ static int update_maps(struct migrate_reuseport_test_case *test_case,
 
 static int migrate_dance(struct migrate_reuseport_test_case *test_case)
 {
+       struct epoll_event ev = {
+               .events = EPOLLIN,
+       };
+       int epoll = -1, nfds;
        int i, err;
 
+       if (test_case->state != BPF_TCP_NEW_SYN_RECV) {
+               epoll = epoll_create1(0);
+               if (!ASSERT_NEQ(epoll, -1, "epoll_create1"))
+                       return -1;
+
+               ev.data.fd = test_case->servers[MIGRATED_TO];
+               if (!ASSERT_OK(epoll_ctl(epoll, EPOLL_CTL_ADD,
+                                        test_case->servers[MIGRATED_TO], &ev),
+                              "epoll_ctl"))
+                       goto close_epoll;
+
+               nfds = epoll_wait(epoll, &ev, 1, 0);
+               if (!ASSERT_EQ(nfds, 0, "epoll_wait 1"))
+                       goto close_epoll;
+       }
+
        /* Migrate TCP_ESTABLISHED and TCP_SYN_RECV requests
         * to the last listener based on eBPF.
         */
        for (i = 0; i < MIGRATED_TO; i++) {
                err = shutdown(test_case->servers[i], SHUT_RDWR);
                if (!ASSERT_OK(err, "shutdown"))
-                       return -1;
+                       goto close_epoll;
        }
 
        /* No dance for TCP_NEW_SYN_RECV to migrate based on eBPF */

tools/testing/selftests/bpf/prog_tests/migrate_reuseport.c static int update_maps(struct migrate_reuseport_test_case *test_case, · line 399

Quoted 10 lines
tools/testing/selftests/bpf/prog_tests/migrate_reuseport.c +7 -0
        if (test_case->state == BPF_TCP_NEW_SYN_RECV)
                return 0;
 
+       nfds = epoll_wait(epoll, &ev, 1, 0);
+       if (!ASSERT_EQ(nfds, 1, "epoll_wait 2")) {
+close_epoll:
+               if (epoll >= 0)
+                       close(epoll);
+               return -1;
+       }

I think you can avoid this goto using __attribute__((cleanup(...)):

  static void close_fd(int *fd)
  {
        if (*fd >= 0)
                close(*fd);
  }

  #define __close_fd __attribute__((cleanup(close_fd)))

then in the test:

__close_fd int epoll = -1;

there's an example of this in tools/testing/selftests/bpf/prog_tests/socket_helpers.h.

#7 lore raw

Re: [PATCH net v4 2/2] selftests/bpf: check epoll readiness during reuseport migration

Thanks both. Keeping the goto for consistency with the rest of the test.

Quoted 133 lines · Kuniyuki Iwashima
Quoted 3 lines · Zhenzhong Wu

Thanks Tamir, I will fold this into v5 - there's already a precedent in socket_helpers.h, so I will just include it from there.

The test does not use cleanup in other places,
no need to mix them up.

Quoted 123 lines · Tamir Duberstein
Quoted 121 lines · Zhenzhong Wu
Quoted 92 lines

Inside migrate_dance(), add epoll checks around shutdown() to verify that the target listener is not ready before shutdown() and becomes ready immediately after shutdown() triggers migration.

Cover TCP_ESTABLISHED and TCP_SYN_RECV. Exclude TCP_NEW_SYN_RECV as it depends on later handshake completion.

---
 .../bpf/prog_tests/migrate_reuseport.c        | 49 ++++++++++++++++---
 1 file changed, 42 insertions(+), 7 deletions(-)
tools/testing/selftests/bpf/prog_tests/migrate_reuseport.c +32 -7
index 653b0a20f..c62907732 100644
@@ -7,24 +7,29 @@
  *   3. call listen() for 1 server socket. (migration target)
  *   4. update a map to migrate all child sockets
  *        to the last server socket (migrate_map[cookie] = 4)
- *   5. call shutdown() for first 4 server sockets
+ *   5. for TCP_ESTABLISHED and TCP_SYN_RECV cases, verify via epoll
+ *        that the last server socket is not ready before migration.
+ *   6. call shutdown() for first 4 server sockets
  *        and migrate the requests in the accept queue
  *        to the last server socket.
- *   6. call listen() for the second server socket.
- *   7. call shutdown() for the last server
+ *   7. for TCP_ESTABLISHED and TCP_SYN_RECV cases, verify via epoll
+ *        that the last server socket is ready after migration.
+ *   8. call listen() for the second server socket.
+ *   9. call shutdown() for the last server
  *        and migrate the requests in the accept queue
  *        to the second server socket.
- *   8. call listen() for the last server.
- *   9. call shutdown() for the second server
+ *  10. call listen() for the last server.
+ *  11. call shutdown() for the second server
  *        and migrate the requests in the accept queue
  *        to the last server socket.
- *  10. call accept() for the last server socket.
+ *  12. call accept() for the last server socket.
  *
  * Author: Kuniyuki Iwashima <[email protected]>
  */
 
 #include <bpf/bpf.h>
 #include <bpf/libbpf.h>
+#include <sys/epoll.h>
 
 #include "test_progs.h"
 #include "test_migrate_reuseport.skel.h"
@@ -350,21 +355,51 @@ static int update_maps(struct migrate_reuseport_test_case *test_case,
 
 static int migrate_dance(struct migrate_reuseport_test_case *test_case)
 {
+       struct epoll_event ev = {
+               .events = EPOLLIN,
+       };
+       int epoll = -1, nfds;
        int i, err;
 
+       if (test_case->state != BPF_TCP_NEW_SYN_RECV) {
+               epoll = epoll_create1(0);
+               if (!ASSERT_NEQ(epoll, -1, "epoll_create1"))
+                       return -1;
+
+               ev.data.fd = test_case->servers[MIGRATED_TO];
+               if (!ASSERT_OK(epoll_ctl(epoll, EPOLL_CTL_ADD,
+                                        test_case->servers[MIGRATED_TO], &ev),
+                              "epoll_ctl"))
+                       goto close_epoll;
+
+               nfds = epoll_wait(epoll, &ev, 1, 0);
+               if (!ASSERT_EQ(nfds, 0, "epoll_wait 1"))
+                       goto close_epoll;
+       }
+
        /* Migrate TCP_ESTABLISHED and TCP_SYN_RECV requests
         * to the last listener based on eBPF.
         */
        for (i = 0; i < MIGRATED_TO; i++) {
                err = shutdown(test_case->servers[i], SHUT_RDWR);
                if (!ASSERT_OK(err, "shutdown"))
-                       return -1;
+                       goto close_epoll;
        }
 
        /* No dance for TCP_NEW_SYN_RECV to migrate based on eBPF */

tools/testing/selftests/bpf/prog_tests/migrate_reuseport.c static int update_maps(struct migrate_reuseport_test_case *test_case, · line 399

Quoted 10 lines
tools/testing/selftests/bpf/prog_tests/migrate_reuseport.c +7 -0
        if (test_case->state == BPF_TCP_NEW_SYN_RECV)
                return 0;
 
+       nfds = epoll_wait(epoll, &ev, 1, 0);
+       if (!ASSERT_EQ(nfds, 1, "epoll_wait 2")) {
+close_epoll:
+               if (epoll >= 0)
+                       close(epoll);
+               return -1;
+       }

I think you can avoid this goto using __attribute__((cleanup(...)):

  static void close_fd(int *fd)
  {
        if (*fd >= 0)
                close(*fd);
  }

  #define __close_fd __attribute__((cleanup(close_fd)))

then in the test:

__close_fd int epoll = -1;

there's an example of this in tools/testing/selftests/bpf/prog_tests/socket_helpers.h.

#8 lore raw
In reply to Zhenzhong Wu
This series was applied to netdev/net.git (main) by Jakub Kicinski <[email protected]>:

Hello:

This series was applied to netdev/net.git (main)
by Jakub Kicinski <[email protected]>:

Quoted 5 lines · On Wed, 22 Apr 2026 10:45:52 +0800 you wrote:

This series fixes a missing wakeup when inet_csk_listen_stop() migrates an established child socket from a closing listener to another socket in the same SO_REUSEPORT group after the child has already been queued for accept.

Quoted 7 lines

The target listener receives the migrated accept-queue entry via inet_csk_reqsk_queue_add(), but its waiters are not notified. Nonblocking accept() still succeeds because it checks the accept queue directly, but readiness-based waiters can remain asleep until another connection generates a wakeup.

[...]

Here is the summary with links:
- [net,v4,1/2] tcp: call sk_data_ready() after listener migration

    https://git.kernel.org/netdev/net/c/3864c6ba1e04
  - [net,v4,2/2] selftests/bpf: check epoll readiness during reuseport migration
    https://git.kernel.org/netdev/net/c/c01cfc488675

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html