wifi: mt76: mt7925: keep TX BA state in the primary WCID
Subsystems (2)
PATCH 1/3 wifi: mt76: mt7925: keep TX BA state in the primary WCID
From: Sean Wang <[email protected]>
For MLO, the same TID can run over different links. Keeping TX BA state in a link WCID makes the state depend on which link starts aggregation first.
Store it in the primary WCID instead, so the BA state stays stable across links.
--- drivers/net/wireless/mediatek/mt76/mt7925/mac.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-)
drivers/net/wireless/mediatek/mt76/mt7925/mac.c +7 -8
@@ -841,7 +841,6 @@ static void mt7925_tx_check_aggr(struct ieee80211_sta *sta, struct sk_buff *skb, {struct ieee80211_tx_info *info =IEEE80211_SKB_CB (skb);struct ieee80211_link_sta *link_sta; -struct mt792x_link_sta *mlink;struct mt792x_sta *msta;bool is_8023;u16 fc, tid;
@@ -880,14 +879,14 @@ static void mt7925_tx_check_aggr(struct ieee80211_sta *sta, struct sk_buff *skb, msta = (struct mt792x_sta *)sta->drv_priv; -if (sta->mlo && msta->deflink_id !=IEEE80211_LINK_UNSPECIFIED ) - mlink =rcu_dereference (msta->link[msta->deflink_id]); -else - mlink = &msta->deflink; - -if (!test_and_set_bit (tid, &mlink->wcid.ampdu_state)) { +/* Packets belonging to the same TID can be transmitted over multiple +* links. Keep the TX BA session state in the primary link so all links +* share the same AMPDU bookkeeping. +*/ +if (!test_and_set_bit (tid, &msta->deflink.wcid.ampdu_state)) {if (ieee80211_start_tx_ba_session (sta, tid,0 )) -clear_bit (tid, &mlink->wcid.ampdu_state); +clear_bit (tid, &msta->deflink.wcid.ampdu_state); + } }
base-commit: e8c819df02436f2c2379766946735e1f06a7c923
Signature · 1 line
2.43.0
PATCH 2/3 wifi: mt76: mt7925: pass WCID explicitly to mt7925_mcu_sta_ba()
From: Sean Wang <[email protected]>
mt7925_mcu_sta_ba() currently hides the BA target behind an implicit WCID lookup.
Pass the WCID explicitly so the caller controls which BA context is being programmed.
No functional change intended.
--- drivers/net/wireless/mediatek/mt76/mt7925/mcu.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/net/wireless/mediatek/mt76/mt7925/mcu.c +3 -2
@@ -624,9 +624,8 @@ void mt7925_mcu_rx_event(struct mt792x_dev *dev, struct sk_buff *skb)static int mt7925_mcu_sta_ba (struct mt76_dev *dev,struct mt76_vif_link *mvif,struct ieee80211_ampdu_params *params, -bool enable,bool tx) +struct mt76_wcid *wcid,bool enable,bool tx) { -struct mt76_wcid *wcid = (struct mt76_wcid *)params->sta->drv_priv;struct sta_rec_ba_uni *ba;struct sk_buff *skb;struct tlv *tlv;
@@ -664,6 +663,7 @@ int mt7925_mcu_uni_tx_ba(struct mt792x_dev *dev, msta->deflink.wcid.amsdu = false;return mt7925_mcu_sta_ba (&dev->mt76, &mvif->bss_conf.mt76, params, + &msta->deflink.wcid, enable, true); }
@@ -675,6 +675,7 @@ int mt7925_mcu_uni_rx_ba(struct mt792x_dev *dev,struct mt792x_vif *mvif = msta->vif;return mt7925_mcu_sta_ba (&dev->mt76, &mvif->bss_conf.mt76, params, + &msta->deflink.wcid, enable, false); }
Signature · 1 line
2.43.0
PATCH 3/3 wifi: mt76: mt7925: program BA state on active links
In reply to [email protected]From: Sean Wang <[email protected]>
With MLO, traffic for one TID can be sent on any active link. Programming BA state only on the default link leaves the other active links out of sync.
Program BA state on all active links instead.
--- .../net/wireless/mediatek/mt76/mt7925/main.c | 10 +-- .../net/wireless/mediatek/mt76/mt7925/mcu.c | 67 ++++++++++++++----- .../wireless/mediatek/mt76/mt7925/mt7925.h | 4 +- 3 files changed, 59 insertions(+), 22 deletions(-)
drivers/net/wireless/mediatek/mt76/mt7925/main.c +5 -5
@@ -1372,22 +1372,22 @@ mt7925_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif,case IEEE80211_AMPDU_RX_START :mt76_rx_aggr_start (&dev->mt76, &msta->deflink.wcid, tid, ssn, params->buf_size); -mt7925_mcu_uni_rx_ba (dev, params, true); +mt7925_mcu_uni_rx_ba (dev, params, vif, true);break ;case IEEE80211_AMPDU_RX_STOP :mt76_rx_aggr_stop (&dev->mt76, &msta->deflink.wcid, tid); -mt7925_mcu_uni_rx_ba (dev, params, false); +mt7925_mcu_uni_rx_ba (dev, params, vif, false);break ;case IEEE80211_AMPDU_TX_OPERATIONAL : mtxq->aggr = true; mtxq->send_bar = false; -mt7925_mcu_uni_tx_ba (dev, params, true); +mt7925_mcu_uni_tx_ba (dev, params, vif, true);break ;case IEEE80211_AMPDU_TX_STOP_FLUSH :case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT : mtxq->aggr = false;clear_bit (tid, &msta->deflink.wcid.ampdu_state); -mt7925_mcu_uni_tx_ba (dev, params, false); +mt7925_mcu_uni_tx_ba (dev, params, vif, false);break ;case IEEE80211_AMPDU_TX_START :set_bit (tid, &msta->deflink.wcid.ampdu_state);
@@ -1396,7 +1396,7 @@ mt7925_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif,case IEEE80211_AMPDU_TX_STOP_CONT : mtxq->aggr = false;clear_bit (tid, &msta->deflink.wcid.ampdu_state); -mt7925_mcu_uni_tx_ba (dev, params, false); +mt7925_mcu_uni_tx_ba (dev, params, vif, false);ieee80211_stop_tx_ba_cb_irqsafe (vif, sta->addr, tid);break ; }
drivers/net/wireless/mediatek/mt76/mt7925/mcu.c +52 -15
84 lines not on this page · raw message
drivers/net/wireless/mediatek/mt76/mt7925/mt7925.h +2 -2
@@ -293,10 +293,10 @@ int mt7925_mcu_set_beacon_filter(struct mt792x_dev *dev, bool enable);int mt7925_mcu_uni_tx_ba (struct mt792x_dev *dev,struct ieee80211_ampdu_params *params, -bool enable); +struct ieee80211_vif *vif,bool enable);int mt7925_mcu_uni_rx_ba (struct mt792x_dev *dev,struct ieee80211_ampdu_params *params, -bool enable); +struct ieee80211_vif *vif,bool enable);void mt7925_mlo_pm_work (struct work_struct *work);void mt7925_scan_work (struct work_struct *work);void mt7925_roc_work (struct work_struct *work);
Signature · 1 line
2.43.0