md/raid1: fix len reuse across rdevs in choose_first_rdev()
PATCH 1/1 md/raid1: fix len reuse across rdevs in choose_first_rdev()
choose_first_rdev() initializes the variable len before iterating over all rdevs, but passes it by reference to raid1_check_read_range(), which it might update *len and return 0 depending on the layout of the bad block region. As a result, 'len' can be modified during the first iteration and reused for subsequent rdevs, causing later devices to be evaluated with an incorrect length value.
--- drivers/md/raid1.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/md/raid1.c +1 -1
@@ -591,12 +591,12 @@ static int choose_first_rdev(struct r1conf *conf, struct r1bio *r1_bio, int *max_sectors) {sector_t this_sector = r1_bio->sector; -int len = r1_bio->sectors;int disk;for (disk =0 ; disk < conf->raid_disks *2 ; disk++) {struct md_rdev *rdev;int read_len; +int len = r1_bio->sectors;if (r1_bio->bios[disk] ==IO_BLOCKED )continue ;
Signature · 1 line
2.43.0
Hi,
Quoted 21 lines · Abd-Alrhman Masalkhi
choose_first_rdev()initializes the variable len before iterating over all rdevs, but passes it by reference toraid1_check_read_range(), which it might update *len and return 0 depending on the layout of the bad block region. As a result, 'len' can be modified during the first iteration and reused for subsequent rdevs, causing later devices to be evaluated with an incorrect length value.Fixes 31a73331752d3 ("md/raid1: factor out read_first_rdev() from read_balance()")Signed-off-by Abd-Alrhman Masalkhi <[email protected]>--- drivers/md/raid1.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/md/raid1.c +0
-0@@ -591,12 +591,12 @@ static int choose_first_rdev(struct r1conf *conf, struct r1bio *r1_bio, int *max_sectors) {sector_t this_sector = r1_bio->sector;
drivers/md/raid1.c static int choose_first_rdev(struct r1conf *conf, struct r1bio *r1_bio, · line 602
Quoted 10 lines
drivers/md/raid1.c +1
-1-int len = r1_bio->sectors;int disk;for (disk =0 ; disk < conf->raid_disks *2 ; disk++) {struct md_rdev *rdev;int read_len; +int len = r1_bio->sectors;if (r1_bio->bios[disk] ==IO_BLOCKED )continue ;
This patch is wrong, choose_first_rdev() is used when raid1_should_read_first() is true, meaning the read overlaps an unsynced/resyncing area. Reset len can cause the problem that reading the same area can return different data.
Signature · 2 lines
Thansk, Kuai
Hi Kaui,
Quoted 32 lines · Yu Kuai
Hi,
Quoted 29 lines · Abd-Alrhman Masalkhi
choose_first_rdev()initializes the variable len before iterating over all rdevs, but passes it by reference toraid1_check_read_range(), which it might update *len and return 0 depending on the layout of the bad block region. As a result, 'len' can be modified during the first iteration and reused for subsequent rdevs, causing later devices to be evaluated with an incorrect length value.Fixes 31a73331752d3 ("md/raid1: factor out read_first_rdev() from read_balance()")Signed-off-by Abd-Alrhman Masalkhi <[email protected]>--- drivers/md/raid1.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/md/raid1.c +1
-1@@ -591,12 +591,12 @@ static int choose_first_rdev(struct r1conf *conf, struct r1bio *r1_bio, int *max_sectors) {sector_t this_sector = r1_bio->sector; -int len = r1_bio->sectors;int disk;for (disk =0 ; disk < conf->raid_disks *2 ; disk++) {struct md_rdev *rdev;int read_len; +int len = r1_bio->sectors;
Quoted 7 lines
drivers/md/raid1.c static int choose_first_rdev(struct r1conf *conf, struct r1bio *r1_bio, · line 602
Quoted 2 lines
drivers/md/raid1.c +0
-0if (r1_bio->bios[disk] ==IO_BLOCKED )continue ;This patch is wrong,
choose_first_rdev()is used whenraid1_should_read_first()is true, meaning the read overlaps an unsynced/resyncing area. Reset len can cause the problem that reading the same area can return different data.
Thank you for the detailed explanation. After carefully re-reading the code and your feedback, I understand why the patch is wrong.
Quoted 3 lines
Signature · 2 lines
Thansk, Kuai
Signature · 2 lines
Best Regards, Abd-Alrhman