Skip to contentSkip to conversation

ARM: dts: ixp4xx: use phandle-based GPIOs in mi424wr

PATCH In review Mohamed Ayman 2 participants 2 messages Apr 28 – May 5

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARM: dts: ixp4xx: use phandle-based GPIOs in mi424wr

Convert remaining legacy integer GPIO specifiers to phandle-based descriptors in intel-ixp42x-actiontec-mi424wr.dtsi.

All other GPIOs in this file already use &gpio0/&gpio1. These are the last remaining legacy users in the IXP4xx DTS files.

---
 .../boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi  | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi +3 -3
index 9b54e3c01a34..3043ae7232dd 100644
@@ -195,19 +195,19 @@ gpio1: gpio@1,0 {
 
 				pci-reset-hog {
 					gpio-hog;
-					gpios = <7 GPIO_ACTIVE_HIGH>;
+					gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
 					output-high;
 					line-name = "PCI reset";
 				};
 				pstn-relay-hog-1 {
 					gpio-hog;
-					gpios = <11 GPIO_ACTIVE_HIGH>;
+					gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
 					output-low;
 					line-name = "PSTN relay control 1";
 				};
 				pstn-relay-hog-2 {
 					gpio-hog;
-					gpios = <12 GPIO_ACTIVE_HIGH>;
+					gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 					output-low;
 					line-name = "PSTN relay control 2";
 				};
Signature · 1 line
2.34.1
maintainer
#1 lore raw
Quoted 7 lines · Mohamed Ayman

Convert remaining legacy integer GPIO specifiers to phandle-based descriptors in intel-ixp42x-actiontec-mi424wr.dtsi.

All other GPIOs in this file already use &gpio0/&gpio1. These are the last remaining legacy users in the IXP4xx DTS files.

I signed this off and sent to the SoC maintainers for application.

Yours,
Linus Walleij