Skip to contentSkip to conversation

LoongArch: Move KASLR to EFI stub to avoid initrd overlap

PATCH Superseded WANG Rui 3 participants 10 messages Apr 29

Subsystems (2)

v3 of 5 Superseded Latest is v5 →

lore
Share & tools
lore

WANG Rui

author
#0 lore raw

v3 cover LoongArch: Move KASLR to EFI stub to avoid initrd overlap

Changes since [v2]:
* Add a new patch to prevent initrd overlap during relocation.
* Revert changes to the CONFIG_RANDOMIZE_BASE_MAX_OFFSET range.

Changes since [v1]:
* Drop the patch "LoongArch: Allow rdtime_h() and rdtime_l() in 64-bit builds".
* Use random_get_entropy() instead of rdtime_l().

This series addresses a potential overlap issue between the kernel image and the initrd when KASLR is enabled.

In the normal boot flow, the bootloader is responsible for loading both vmlinux and the initrd, and it can guarantee that the two do not overlap in memory. However, this assumption only holds as long as neither image changes its location afterwards.

The in-kernel KASLR implementation breaks that assumption. When the initrd is placed close to the kernel image, randomizing the kernel location at runtime may move it into the initrd region, leading to memory corruption early during boot.

To fix this, this series moves the KASLR logic out of the kernel proper and into the EFI stub. With this change, the final placement of both the kernel image and the initrd is determined by the EFI memory allocator. This ensures that the two allocations are coordinated and cannot overlap.

Functionally, the kernel still supports KASLR as before, but the randomization now happens before the kernel is entered, rather than during early kernel relocation.

[v2]: https://lore.kernel.org/loongarch/[email protected]
[v1]: https://lore.kernel.org/loongarch/[email protected]

WANG Rui (3):
efi/loongarch: Randomize kernel preferred address for KASLR
LoongArch: Skip relocation-time KASLR if it has already been applied
LoongArch: Avoid initrd overlap during kernel relocation

 arch/loongarch/include/asm/efi.h         |  4 +-
 arch/loongarch/kernel/relocate.c         | 49 ++++++++++++++++++++++++
 drivers/firmware/efi/libstub/loongarch.c | 16 ++++++++
 3 files changed, 68 insertions(+), 1 deletion(-)
Signature · 1 line
2.54.0
author
#1 lore raw

PATCH v3 1/3 efi/loongarch: Randomize kernel preferred address for KASLR

Introduce efi_get_kimg_kaslr_address() to compute the preferred kernel image address dynamically when CONFIG_RANDOMIZE_BASE is enabled. The function derives a random offset using EFI-provided randomness combined with the timer value, and constrains it within CONFIG_RANDOMIZE_BASE_MAX_OFFSET.

Update EFI_KIMG_PREFERRED_ADDRESS to call this helper so that the EFI stub can select a randomized load address when KASLR is active, while preserving the original base address behavior when KASLR is disabled or nokaslr is specified.

---
 arch/loongarch/include/asm/efi.h         |  4 +++-
 drivers/firmware/efi/libstub/loongarch.c | 16 ++++++++++++++++
 2 files changed, 19 insertions(+), 1 deletion(-)
arch/loongarch/include/asm/efi.h +3 -1
index eddc8e79b3fa..f831320efd41 100644
@@ -30,6 +30,8 @@ static inline unsigned long efi_get_kimg_min_align(void)
 	return SZ_2M;
 }
 
-#define EFI_KIMG_PREFERRED_ADDRESS	PHYSADDR(VMLINUX_LOAD_ADDRESS)
+unsigned long efi_get_kimg_kaslr_address(void);
+
+#define EFI_KIMG_PREFERRED_ADDRESS	efi_get_kimg_kaslr_address()
 
 #endif /* _ASM_LOONGARCH_EFI_H */
drivers/firmware/efi/libstub/loongarch.c +16 -0
index 9825f5218137..51997a0e83bd 100644
@@ -38,6 +38,22 @@ static efi_status_t exit_boot_func(struct efi_boot_memmap *map, void *priv)
 	return EFI_SUCCESS;
 }
 
+unsigned long efi_get_kimg_kaslr_address(void)
+{
+	unsigned int random_offset = 0;
+
+#ifdef CONFIG_RANDOMIZE_BASE
+	if (!efi_nokaslr) {
+		efi_get_random_bytes(sizeof(random_offset), (u8 *)&random_offset);
+		random_offset ^= (random_get_entropy() << 16);
+		random_offset &= (CONFIG_RANDOMIZE_BASE_MAX_OFFSET - 1);
+		random_offset = ALIGN(random_offset + SZ_64K, SZ_64K);
+	}
+#endif
+
+	return PHYSADDR(VMLINUX_LOAD_ADDRESS) + random_offset;
+}
+
 unsigned long __weak kernel_entry_address(unsigned long kernel_addr,
 		efi_loaded_image_t *image)
 {
Signature · 1 line
2.54.0
maintainer
#2 lore raw

Re: [PATCH v3 1/3] efi/loongarch: Randomize kernel preferred address for KASLR

Hi, Ard,

Quoted 7 lines · WANG Rui

Introduce efi_get_kimg_kaslr_address() to compute the preferred kernel image address dynamically when CONFIG_RANDOMIZE_BASE is enabled. The function derives a random offset using EFI-provided randomness combined with the timer value, and constrains it within CONFIG_RANDOMIZE_BASE_MAX_OFFSET.

Quoted 6 lines

Update EFI_KIMG_PREFERRED_ADDRESS to call this helper so that the EFI stub can select a randomized load address when KASLR is active, while preserving the original base address behavior when KASLR is disabled or nokaslr is specified.

If you have no objections, can you give an Acked-by? I thinks this series should go to loongarch tree.

Huacai

Quoted 49 lines
---
 arch/loongarch/include/asm/efi.h         |  4 +++-
 drivers/firmware/efi/libstub/loongarch.c | 16 ++++++++++++++++
 2 files changed, 19 insertions(+), 1 deletion(-)
arch/loongarch/include/asm/efi.h +3 -1
index eddc8e79b3fa..f831320efd41 100644
@@ -30,6 +30,8 @@ static inline unsigned long efi_get_kimg_min_align(void)
        return SZ_2M;
 }
 
-#define EFI_KIMG_PREFERRED_ADDRESS     PHYSADDR(VMLINUX_LOAD_ADDRESS)
+unsigned long efi_get_kimg_kaslr_address(void);
+
+#define EFI_KIMG_PREFERRED_ADDRESS     efi_get_kimg_kaslr_address()
 
 #endif /* _ASM_LOONGARCH_EFI_H */
drivers/firmware/efi/libstub/loongarch.c +16 -1
index 9825f5218137..51997a0e83bd 100644
@@ -38,6 +38,22 @@ static efi_status_t exit_boot_func(struct efi_boot_memmap *map, void *priv)
        return EFI_SUCCESS;
 }
 
+unsigned long efi_get_kimg_kaslr_address(void)
+{
+       unsigned int random_offset = 0;
+
+#ifdef CONFIG_RANDOMIZE_BASE
+       if (!efi_nokaslr) {
+               efi_get_random_bytes(sizeof(random_offset), (u8 *)&random_offset);
+               random_offset ^= (random_get_entropy() << 16);
+               random_offset &= (CONFIG_RANDOMIZE_BASE_MAX_OFFSET - 1);
+               random_offset = ALIGN(random_offset + SZ_64K, SZ_64K);
+       }
+#endif
+
+       return PHYSADDR(VMLINUX_LOAD_ADDRESS) + random_offset;
+}
+
 unsigned long __weak kernel_entry_address(unsigned long kernel_addr,
                efi_loaded_image_t *image)
 {
--

2.54.0

maintainer
#3 lore raw

Re: [PATCH v3 1/3] efi/loongarch: Randomize kernel preferred address for KASLR

In reply to WANG Rui
Quoted 22 lines · WANG Rui

Introduce efi_get_kimg_kaslr_address() to compute the preferred kernel image address dynamically when CONFIG_RANDOMIZE_BASE is enabled. The function derives a random offset using EFI-provided randomness combined with the timer value, and constrains it within CONFIG_RANDOMIZE_BASE_MAX_OFFSET.

Update EFI_KIMG_PREFERRED_ADDRESS to call this helper so that the EFI stub can select a randomized load address when KASLR is active, while preserving the original base address behavior when KASLR is disabled or nokaslr is specified.

---
 arch/loongarch/include/asm/efi.h         |  4 +++-
 drivers/firmware/efi/libstub/loongarch.c | 16 ++++++++++++++++
 2 files changed, 19 insertions(+), 1 deletion(-)
arch/loongarch/include/asm/efi.h +0 -0
index eddc8e79b3fa..f831320efd41 100644

arch/loongarch/include/asm/efi.h static inline unsigned long efi_get_kimg_min_align(void) · line 34

Quoted 6 lines
arch/loongarch/include/asm/efi.h +2 -1
@@ -30,6 +30,8 @@ static inline unsigned long efi_get_kimg_min_align(void)
 	return SZ_2M;
 }
 
-#define EFI_KIMG_PREFERRED_ADDRESS	PHYSADDR(VMLINUX_LOAD_ADDRESS)
+unsigned long efi_get_kimg_kaslr_address(void);
+

Where is the call to this function being added?

Quoted 34 lines
arch/loongarch/include/asm/efi.h +1 -0
+#define EFI_KIMG_PREFERRED_ADDRESS	efi_get_kimg_kaslr_address()
 
 #endif /* _ASM_LOONGARCH_EFI_H */
drivers/firmware/efi/libstub/loongarch.c +16 -0
index 9825f5218137..51997a0e83bd 100644
@@ -38,6 +38,22 @@ static efi_status_t exit_boot_func(struct 
 efi_boot_memmap *map, void *priv)
 	return EFI_SUCCESS;
 }
 
+unsigned long efi_get_kimg_kaslr_address(void)
+{
+	unsigned int random_offset = 0;
+
+#ifdef CONFIG_RANDOMIZE_BASE
+	if (!efi_nokaslr) {
+		efi_get_random_bytes(sizeof(random_offset), (u8 *)&random_offset);
+		random_offset ^= (random_get_entropy() << 16);
+		random_offset &= (CONFIG_RANDOMIZE_BASE_MAX_OFFSET - 1);
+		random_offset = ALIGN(random_offset + SZ_64K, SZ_64K);
+	}
+#endif
+
+	return PHYSADDR(VMLINUX_LOAD_ADDRESS) + random_offset;
+}
+
 unsigned long __weak kernel_entry_address(unsigned long kernel_addr,
 		efi_loaded_image_t *image)

{

Signature · 1 line
2.54.0
author
#4 lore raw

Re: [PATCH v3 1/3] efi/loongarch: Randomize kernel preferred address for KASLR

Hi Ard,

Quoted 29 lines · Ard Biesheuvel
Quoted 25 lines · WANG Rui

Introduce efi_get_kimg_kaslr_address() to compute the preferred kernel image address dynamically when CONFIG_RANDOMIZE_BASE is enabled. The function derives a random offset using EFI-provided randomness combined with the timer value, and constrains it within CONFIG_RANDOMIZE_BASE_MAX_OFFSET.

Update EFI_KIMG_PREFERRED_ADDRESS to call this helper so that the EFI stub can select a randomized load address when KASLR is active, while preserving the original base address behavior when KASLR is disabled or nokaslr is specified.

---
 arch/loongarch/include/asm/efi.h         |  4 +++-
 drivers/firmware/efi/libstub/loongarch.c | 16 ++++++++++++++++
 2 files changed, 19 insertions(+), 1 deletion(-)
arch/loongarch/include/asm/efi.h +0 -0
index eddc8e79b3fa..f831320efd41 100644
@@ -30,6 +30,8 @@ static inline unsigned long efi_get_kimg_min_align(void)
      return SZ_2M;
 }
 
Quoted 7 lines

arch/loongarch/include/asm/efi.h static inline unsigned long efi_get_kimg_min_align(void) · line 34

Quoted 3 lines
arch/loongarch/include/asm/efi.h +2 -1
-#define EFI_KIMG_PREFERRED_ADDRESS   PHYSADDR(VMLINUX_LOAD_ADDRESS)
+unsigned long efi_get_kimg_kaslr_address(void);
+

Where is the call to this function being added?

Quoted 1 line
arch/loongarch/include/asm/efi.h +1 -0
+#define EFI_KIMG_PREFERRED_ADDRESS   efi_get_kimg_kaslr_address()

1. drivers/firmware/efi/libstub/loongarch-stub.c

  efi_status_t handle_kernel_image(...)
  {
      ...
      status = efi_relocate_kernel(&kernel_addr, kernel_fsize, kernel_asize,
               EFI_KIMG_PREFERRED_ADDRESS, efi_get_kimg_min_align(), 0x0);
      ...
  }

2. drivers/firmware/efi/libstub/zboot.c

  static unsigned long alloc_preferred_address(...)
  {
  #ifdef EFI_KIMG_PREFERRED_ADDRESS
      efi_physical_addr_t efi_addr = EFI_KIMG_PREFERRED_ADDRESS;
      if (efi_bs_call(allocate_pages, EFI_ALLOCATE_ADDRESS, EFI_LOADER_DATA,
              alloc_size / EFI_PAGE_SIZE, &efi_addr) == EFI_SUCCESS)
          return efi_addr;
  #endif
      return ULONG_MAX;

}

Thanks,
Rui

Quoted 33 lines
Quoted 33 lines
arch/loongarch/include/asm/efi.h +0 -0
 #endif /* _ASM_LOONGARCH_EFI_H */
drivers/firmware/efi/libstub/loongarch.c +16 -0
index 9825f5218137..51997a0e83bd 100644
@@ -38,6 +38,22 @@ static efi_status_t exit_boot_func(struct
 efi_boot_memmap *map, void *priv)
      return EFI_SUCCESS;
 }
 
+unsigned long efi_get_kimg_kaslr_address(void)
+{
+     unsigned int random_offset = 0;
+
+#ifdef CONFIG_RANDOMIZE_BASE
+     if (!efi_nokaslr) {
+             efi_get_random_bytes(sizeof(random_offset), (u8 *)&random_offset);
+             random_offset ^= (random_get_entropy() << 16);
+             random_offset &= (CONFIG_RANDOMIZE_BASE_MAX_OFFSET - 1);
+             random_offset = ALIGN(random_offset + SZ_64K, SZ_64K);
+     }
+#endif
+
+     return PHYSADDR(VMLINUX_LOAD_ADDRESS) + random_offset;
+}
+
 unsigned long __weak kernel_entry_address(unsigned long kernel_addr,
              efi_loaded_image_t *image)

{
--
2.54.0

maintainer
#5 lore raw

Re: [PATCH v3 1/3] efi/loongarch: Randomize kernel preferred address for KASLR

Quoted 57 lines · WANG Rui

Hi Ard,

Quoted 29 lines · Ard Biesheuvel
Quoted 25 lines · WANG Rui

Introduce efi_get_kimg_kaslr_address() to compute the preferred kernel image address dynamically when CONFIG_RANDOMIZE_BASE is enabled. The function derives a random offset using EFI-provided randomness combined with the timer value, and constrains it within CONFIG_RANDOMIZE_BASE_MAX_OFFSET.

Update EFI_KIMG_PREFERRED_ADDRESS to call this helper so that the EFI stub can select a randomized load address when KASLR is active, while preserving the original base address behavior when KASLR is disabled or nokaslr is specified.

---
 arch/loongarch/include/asm/efi.h         |  4 +++-
 drivers/firmware/efi/libstub/loongarch.c | 16 ++++++++++++++++
 2 files changed, 19 insertions(+), 1 deletion(-)
arch/loongarch/include/asm/efi.h +0 -0
index eddc8e79b3fa..f831320efd41 100644
@@ -30,6 +30,8 @@ static inline unsigned long efi_get_kimg_min_align(void)
      return SZ_2M;
 }
 
Quoted 7 lines

arch/loongarch/include/asm/efi.h static inline unsigned long efi_get_kimg_min_align(void) · line 34

Quoted 3 lines
arch/loongarch/include/asm/efi.h +2 -1
-#define EFI_KIMG_PREFERRED_ADDRESS   PHYSADDR(VMLINUX_LOAD_ADDRESS)
+unsigned long efi_get_kimg_kaslr_address(void);
+

Where is the call to this function being added?

Quoted 1 line
arch/loongarch/include/asm/efi.h +1 -0
+#define EFI_KIMG_PREFERRED_ADDRESS   efi_get_kimg_kaslr_address()

1. drivers/firmware/efi/libstub/loongarch-stub.c

  efi_status_t handle_kernel_image(...)
  {
      ...
      status = efi_relocate_kernel(&kernel_addr, kernel_fsize, kernel_asize,
               EFI_KIMG_PREFERRED_ADDRESS, efi_get_kimg_min_align(), 0x0);
      ...
  }

2. drivers/firmware/efi/libstub/zboot.c

  static unsigned long alloc_preferred_address(...)
  {
  #ifdef EFI_KIMG_PREFERRED_ADDRESS
      efi_physical_addr_t efi_addr = EFI_KIMG_PREFERRED_ADDRESS;
Quoted 7 lines
      if (efi_bs_call(allocate_pages, EFI_ALLOCATE_ADDRESS, EFI_LOADER_DATA,
              alloc_size / EFI_PAGE_SIZE, &efi_addr) == EFI_SUCCESS)
          return efi_addr;
  #endif
      return ULONG_MAX;

}

Ah apologies - I misread the patch.

author
#6 lore raw

PATCH v3 2/3 LoongArch: Skip relocation-time KASLR if it has already been applied

In reply to WANG Rui

When the kernel is relocated during early boot, a randomized load address may already have been selected and applied. In this case, performing KASLR again in relocate.c is unnecessary.

---
 arch/loongarch/kernel/relocate.c | 4 ++++
 1 file changed, 4 insertions(+)
arch/loongarch/kernel/relocate.c +4 -0
index 16f6a9b39659..c36604a81d08 100644
@@ -139,6 +139,10 @@ static inline __init bool kaslr_disabled(void)
 	char *str;
 	const char *builtin_cmdline = CONFIG_CMDLINE;
 
+	/* KASLR is performed during early boot. */
+	if (kaslr_offset())
+		return true;
+
 	str = strstr(builtin_cmdline, "nokaslr");
 	if (str == builtin_cmdline || (str > builtin_cmdline && *(str - 1) == ' ')) {
 		pr_info(KASLR_DISABLED_MESSAGE, "\'nokaslr\'", "built-in");
Signature · 1 line
2.54.0
author
#7 lore raw

PATCH v3 3/3 LoongArch: Avoid initrd overlap during kernel relocation

In reply to WANG Rui

Validate the relocation address against the initrd region specified via "initrd=" or "initrdmem=" on the command line. Reject relocation targets that overlap the initrd to prevent memory corruption during early boot.

---
 arch/loongarch/kernel/relocate.c | 45 ++++++++++++++++++++++++++++++++
 1 file changed, 45 insertions(+)
arch/loongarch/kernel/relocate.c +45 -0
index c36604a81d08..c303c0be8f06 100644
@@ -214,14 +214,59 @@ static inline void __init *determine_relocation_address(void)
 	return RELOCATED_KASLR(destination);
 }
 
+static unsigned long __init try_get_initrd(unsigned long *size)
+{
+	unsigned long start = 0;
+	unsigned int key_length;
+	const char *key;
+	char *p;
+
+	key = "initrd=";
+	key_length = strlen(key);
+	p = strstr(boot_command_line, key);
+
+	if (!p) {
+		key = "initrdmem=";
+		key_length = strlen(key);
+		p = strstr(boot_command_line, key);
+	}
+
+	if (p == boot_command_line || (p > boot_command_line && *(p - 1) == ' ')) {
+		char *endp;
+
+		p += key_length;
+		start = memparse(p, &endp);
+		if (*endp == ',')
+			*size = memparse(endp + 1, NULL);
+	}
+
+	return start;
+}
+
 static inline int __init relocation_addr_valid(void *location_new)
 {
+	unsigned long initrd_start;
+	unsigned long initrd_size = 0;
+
 	if ((unsigned long)location_new & 0x00000ffff)
 		return 0; /* Inappropriately aligned new location */
 
 	if ((unsigned long)location_new < (unsigned long)_end)
 		return 0; /* New location overlaps original kernel */
 
+	initrd_start = try_get_initrd(&initrd_size);
+	if (initrd_start && initrd_size) {
+		unsigned long kernel_start;
+		unsigned long kernel_size;
+
+		kernel_start = PHYSADDR(location_new);
+		kernel_size = (unsigned long)_end - (unsigned long)_text;
+
+		if (kernel_start < (initrd_start + initrd_size) &&
+			initrd_start < (kernel_start + kernel_size))
+			return 0; /* Initrd overlaps kernel */
+	}
+
 	return 1;
 }
 #endif
Signature · 1 line
2.54.0
maintainer
#8 lore raw

Re: [PATCH v3 3/3] LoongArch: Avoid initrd overlap during kernel relocation

Hi, Rui,

Quoted 16 lines · WANG Rui

Validate the relocation address against the initrd region specified via "initrd=" or "initrdmem=" on the command line. Reject relocation targets that overlap the initrd to prevent memory corruption during early boot.

---
 arch/loongarch/kernel/relocate.c | 45 ++++++++++++++++++++++++++++++++
 1 file changed, 45 insertions(+)
arch/loongarch/kernel/relocate.c +0 -0
index c36604a81d08..c303c0be8f06 100644

arch/loongarch/kernel/relocate.c static inline void __init *determine_relocation_address(void) · line 217

Quoted 4 lines
arch/loongarch/kernel/relocate.c +1 -0
@@ -214,14 +214,59 @@ static inline void __init *determine_relocation_address(void)
        return RELOCATED_KASLR(destination);
 }
 
+static unsigned long __init try_get_initrd(unsigned long *size)

Rename to determine_initrd_address() can keep consistency.

arch/loongarch/kernel/relocate.c static inline void __init *determine_relocation_address(void) · line 220

Quoted 3 lines
arch/loongarch/kernel/relocate.c +3 -0
+{
+       unsigned long start = 0;
+       unsigned int key_length;

It's type should be "unsigned long" because strstr() returns "unsigned long".

Huacai

Quoted 55 lines
arch/loongarch/kernel/relocate.c +41 -1
+       const char *key;
+       char *p;
+
+       key = "initrd=";
+       key_length = strlen(key);
+       p = strstr(boot_command_line, key);
+
+       if (!p) {
+               key = "initrdmem=";
+               key_length = strlen(key);
+               p = strstr(boot_command_line, key);
+       }
+
+       if (p == boot_command_line || (p > boot_command_line && *(p - 1) == ' ')) {
+               char *endp;
+
+               p += key_length;
+               start = memparse(p, &endp);
+               if (*endp == ',')
+                       *size = memparse(endp + 1, NULL);
+       }
+
+       return start;
+}
+
 static inline int __init relocation_addr_valid(void *location_new)
 {
+       unsigned long initrd_start;
+       unsigned long initrd_size = 0;
+
        if ((unsigned long)location_new & 0x00000ffff)
                return 0; /* Inappropriately aligned new location */
 
        if ((unsigned long)location_new < (unsigned long)_end)
                return 0; /* New location overlaps original kernel */
 
+       initrd_start = try_get_initrd(&initrd_size);
+       if (initrd_start && initrd_size) {
+               unsigned long kernel_start;
+               unsigned long kernel_size;
+
+               kernel_start = PHYSADDR(location_new);
+               kernel_size = (unsigned long)_end - (unsigned long)_text;
+
+               if (kernel_start < (initrd_start + initrd_size) &&
+                       initrd_start < (kernel_start + kernel_size))
+                       return 0; /* Initrd overlaps kernel */
+       }
+
        return 1;
 }
 #endif
--

2.54.0

maintainer Acked-by on the v3 series
#9 lore raw
In reply to WANG Rui
Quoted 32 lines · WANG Rui

Changes since [v2]:
* Add a new patch to prevent initrd overlap during relocation.
* Revert changes to the CONFIG_RANDOMIZE_BASE_MAX_OFFSET range.

Changes since [v1]:
* Drop the patch "LoongArch: Allow rdtime_h() and rdtime_l() in
64-bit builds".
* Use random_get_entropy() instead of rdtime_l().

This series addresses a potential overlap issue between the kernel image and the initrd when KASLR is enabled.

In the normal boot flow, the bootloader is responsible for loading both vmlinux and the initrd, and it can guarantee that the two do not overlap in memory. However, this assumption only holds as long as neither image changes its location afterwards.

The in-kernel KASLR implementation breaks that assumption. When the initrd is placed close to the kernel image, randomizing the kernel location at runtime may move it into the initrd region, leading to memory corruption early during boot.

To fix this, this series moves the KASLR logic out of the kernel proper and into the EFI stub. With this change, the final placement of both the kernel image and the initrd is determined by the EFI memory allocator. This ensures that the two allocations are coordinated and cannot overlap.

Functionally, the kernel still supports KASLR as before, but the randomization now happens before the kernel is entered, rather than during early kernel relocation.

Quoted 8 lines

[v2]: https://lore.kernel.org/loongarch/[email protected]
[v1]: https://lore.kernel.org/loongarch/[email protected]

WANG Rui (3):
efi/loongarch: Randomize kernel preferred address for KASLR
LoongArch: Skip relocation-time KASLR if it has already been applied
LoongArch: Avoid initrd overlap during kernel relocation

For the series,

Feel free to take the EFI changes via the LoongArch tree.