Skip to contentSkip to conversation

FAILED: patch "[PATCH] iio: frequency: admv1013: fix NULL pointer dereference on str" failed to apply to 6.6-stable tree

PATCH [email protected] 1 participant 1 message May 1

Subsystems (4)
Stable branch IIO Analog Devices IIO drivers Analog devices inc ADMV1013 driver
lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x aac0a51b16700b403a55b67ba495de021db78763
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2026050125-greedy-plow-184f@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..

Possible dependencies:

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From aac0a51b16700b403a55b67ba495de021db78763 Mon Sep 17 00:00:00 2001
From: Antoniu Miclaus <[email protected]>
Date: Thu, 5 Mar 2026 11:14:48 +0200
Subject: [PATCH] iio: frequency: admv1013: fix NULL pointer dereference on str
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

When device_property_read_string() fails, str is left uninitialized but the code falls through to strcmp(str, ...), dereferencing a garbage pointer. Replace manual read/strcmp with device_property_match_property_string() and consolidate the SE mode enums into a single sequential enum, mapping to hardware register values via a switch consistent with other bitfields in the driver.

Several cleanup patches have been applied to this driver recently so this will need a manual backport.

Fixes da35a7b526d9 ("iio: frequency: admv1013: add support for ADMV1013")
Reviewed-by Nuno Sá <[email protected]>
Signed-off-by Antoniu Miclaus <[email protected]>
Reviewed-by Andy Shevchenko <[email protected]>
Cc <[email protected]>
Signed-off-by Jonathan Cameron <[email protected]>
drivers/iio/frequency/admv1013.c +37 -28
index 9202443ef445..b852378b3f68 100644
@@ -85,9 +85,9 @@ enum {
 };
 
 enum {
-	ADMV1013_SE_MODE_POS = 6,
-	ADMV1013_SE_MODE_NEG = 9,
-	ADMV1013_SE_MODE_DIFF = 12
+	ADMV1013_SE_MODE_POS,
+	ADMV1013_SE_MODE_NEG,
+	ADMV1013_SE_MODE_DIFF,
 };
 
 struct admv1013_state {

@@ -468,10 +468,23 @@ static int admv1013_init(struct admv1013_state *st, int vcm_uv)
 	if (ret)
 		return ret;
 
-	data = FIELD_PREP(ADMV1013_QUAD_SE_MODE_MSK, st->quad_se_mode);
+	switch (st->quad_se_mode) {
+	case ADMV1013_SE_MODE_POS:
+		data = 6;
+		break;
+	case ADMV1013_SE_MODE_NEG:
+		data = 9;
+		break;
+	case ADMV1013_SE_MODE_DIFF:
+		data = 12;
+		break;
+	default:
+		return -EINVAL;
+	}
 
 	ret = __admv1013_spi_update_bits(st, ADMV1013_REG_QUAD,
-					 ADMV1013_QUAD_SE_MODE_MSK, data);
+					 ADMV1013_QUAD_SE_MODE_MSK,
+					 FIELD_PREP(ADMV1013_QUAD_SE_MODE_MSK, data));
 	if (ret)
 		return ret;
 

@@ -512,37 +525,33 @@ static void admv1013_powerdown(void *data)
 	admv1013_spi_update_bits(data, ADMV1013_REG_ENABLE, enable_reg_msk, enable_reg);
 }
 
+static const char * const admv1013_input_modes[] = {
+	[ADMV1013_IQ_MODE] = "iq",
+	[ADMV1013_IF_MODE] = "if",
+};
+
+static const char * const admv1013_quad_se_modes[] = {
+	[ADMV1013_SE_MODE_POS] = "se-pos",
+	[ADMV1013_SE_MODE_NEG] = "se-neg",
+	[ADMV1013_SE_MODE_DIFF] = "diff",
+};
+
 static int admv1013_properties_parse(struct admv1013_state *st)
 {
 	int ret;
-	const char *str;
 	struct device *dev = &st->spi->dev;
 
 	st->det_en = device_property_read_bool(dev, "adi,detector-enable");
 
-	ret = device_property_read_string(dev, "adi,input-mode", &str);
-	if (ret)
-		st->input_mode = ADMV1013_IQ_MODE;
+	ret = device_property_match_property_string(dev, "adi,input-mode",
+						    admv1013_input_modes,
+						    ARRAY_SIZE(admv1013_input_modes));
+	st->input_mode = ret >= 0 ? ret : ADMV1013_IQ_MODE;
 
-	if (!strcmp(str, "iq"))
-		st->input_mode = ADMV1013_IQ_MODE;
-	else if (!strcmp(str, "if"))
-		st->input_mode = ADMV1013_IF_MODE;
-	else
-		return -EINVAL;
-
-	ret = device_property_read_string(dev, "adi,quad-se-mode", &str);
-	if (ret)
-		st->quad_se_mode = ADMV1013_SE_MODE_DIFF;
-
-	if (!strcmp(str, "diff"))
-		st->quad_se_mode = ADMV1013_SE_MODE_DIFF;
-	else if (!strcmp(str, "se-pos"))
-		st->quad_se_mode = ADMV1013_SE_MODE_POS;
-	else if (!strcmp(str, "se-neg"))
-		st->quad_se_mode = ADMV1013_SE_MODE_NEG;
-	else
-		return -EINVAL;
+	ret = device_property_match_property_string(dev, "adi,quad-se-mode",
+						    admv1013_quad_se_modes,
+						    ARRAY_SIZE(admv1013_quad_se_modes));
+	st->quad_se_mode = ret >= 0 ? ret : ADMV1013_SE_MODE_DIFF;
 
 	ret = devm_regulator_bulk_get_enable(dev,
 					     ARRAY_SIZE(admv1013_vcc_regs),