mfd: twl4030-power: fix stale ARM machine ID checks to use the DT
Subsystems (3)
PATCH 1/1 mfd: twl4030-power: fix stale ARM machine ID checks to use the DT
The twl4030-power driver contains two checks for ARM machine IDs via machine_is_*() macros. These checks are incorrect because the two platforms concerned now support only FDT booting, which does not use machine IDs, and therefore they will always fail. The legacy board files for these machines were removed in commit 1b383f44aabc ("ARM:
OMAP2+: Drop board file for 3430sdp") and commit e92fc4f04a34 ("ARM:
OMAP2+: Drop legacy board file for LDP"). To resolve this issue, use of_machine_is_compatible() instead.
--- drivers/mfd/twl4030-power.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
drivers/mfd/twl4030-power.c +2 -4
@@ -30,8 +30,6 @@#include <linux/property.h> #include <linux/of.h> -#include <asm/mach-types.h> -static u8 twl4030_start_script_address =0x2b ;/* Register bits for P1, P2 and P3_SW_EVENTS */
@@ -294,8 +292,8 @@ twl4030_config_wakeup12_sequence(const struct twl4030_power_data *pdata,if (err) goto out; -if (pdata->ac_charger_quirk ||machine_is_omap_3430sdp () || -machine_is_omap_ldp ()) { +if (pdata->ac_charger_quirk ||of_machine_is_compatible ("ti,omap3430-sdp" ) || +of_machine_is_compatible ("ti,omap3-ldp" )) {/* Disabling AC charger effect on sleep-active transitions */ err =twl_i2c_read_u8 (TWL_MODULE_PM_MASTER , &data,R_CFG_P1_TRANSITION );
Signature · 1 line
2.43.0
Quoted 4 lines · Ethan Nelson-Moore
The twl4030-power driver contains two checks for ARM machine IDs via machine_is_*() macros. These checks are incorrect because the two platforms concerned now support only FDT booting, which does not use machine IDs, and therefore they will always fail.
I have been informed that this is not correct and the kernel still considers the machine ID when booting with FDT, though there is still value in updating the check because it allows removing the machine IDs from mach-types. I will resend this patch with a fixed commit message after the 24-hour deadline.