troubles with ARM processor type changes on UEFI 2.11
Hi,
I maintain ACPI HEST support on QEMU and I'm one of the Linux kernel reviewers for the RAS subsystem. I'm also the author and maintainer of Linux rasdaemon, responsible to handle RAS reports (including from GHES) on Linux.
There is an incompatible change at UEFI 2.11 spec at Section N.2.4.4.1, which, according with UEFI 2.11 changelog, it is related to this issue:
2462 - Fix the Type mnemonic description in the ARM Processor Error Information Structure
This is the second time the specs changed the meaning of the type field inside the ARM processor error info:
- Before UEFI 2.9A, the spec has a list of values for error type. From the specs, type, at offset 4 was described as:
- Cache error
- TLB Error
- Bus Error
- Micro-architectural Error
All other values are reserved
Yet, there was no information about how this would be encoded.
- UEFI 2.9A defined the actual expected values as:
- Bit 1 - Cache Error
- Bit 2 - TLB Error
- Bit 3 - Bus Error
- Bit 4 - Micro-architectural Error
All other values are reserved
However, even being an incompatible change, the spec didn't change version field at Section N.2.4.4.1.
Linux, QEMU, rasdaemon and likely several BIOS implementations were updated accordingly.
- UEFI 2.11 changed the definition to:
- Bit 0 - Cache Error
- Bit 1 - TLB Error
- Bit 2 - Bus Error
- Bit 3 - Micro-architectural Error
All other values are reserved
Again, another incompatible change and without changing the version field at Section N.2.4.4.1.
With the current mess, it is impossible for the OSPM (and RAS apps) to properly map ARM processor error types, as for instance, type=2 can mean:
- Bus error (up to UEFI 2.9)
- Cache error (UEFI 2.9A and UEFI 2.10)
- TLB error (UEFI 2.11)
Please issue an errata incrementing version number, to allow OSPM QEMU and rasdaemon to properly interpret this field.
Thanks,
Mauro