Skip to contentSkip to conversation

arm64: dts/bindings: Add support for BeagleBadge

PATCH Superseded Judith Mendez 3 participants 6 messages May 13 – May 14

Subsystems (2)

v3 of 6 Superseded Latest is v6 →

lore
Share & tools
lore
#0 lore raw

v3 cover arm64: dts/bindings: Add support for BeagleBadge

Hi,

BeagleBoard.org BeagleBadge[1] is a compact, affordable open source hardware [2] single board computer based on the Texas Instruments AM62L3 SoC designed for IoT and embedded applications. Add base support for the same.

SD boot:

This patch series adds:
- Device tree bindings update for am62l3-badge
- Device tree source for BeagleBadge board
- Defconfig: drivers for BeagleBadge

Changelog since v2:
DTS:
- PWM period: 255ns -> 10000000ns
- vdd_3v3 vin-supply: vsys_out -> vcc_3v3_main
- MCP23S18 reset muxmode: 4 -> 7
- Typo: FUEL_GUAGE_BATLOW -> FUEL_GAUGE_BATLOW
- sdhci2: Remove #address-cells & #size-cells
Defconfig:
- Move config options as per make savedefconfig

V2

V1

Patch series depends on:

[0] https://beagleboard.org/
[1] https://www.beagleboard.org/boards/beaglebadge
[2] https://github.com/beagleboard/BeagleBadge/blob/main/design/BeagleBadge_RevA_V0.7_SCH_251107.pdf

Judith Mendez (3):
dt-bindings: arm: ti: Add am62l3-beaglebadge
arm64: dts: ti: Add k3-am62l3-beaglebadge
arm64: defconfig: Enable drivers for BeagleBadge

 .../devicetree/bindings/arm/ti/k3.yaml        |   1 +
 arch/arm64/boot/dts/ti/Makefile               |   1 +
 .../boot/dts/ti/k3-am62l3-beaglebadge.dts     | 700 ++++++++++++++++++
 arch/arm64/configs/defconfig                  |   5 +
 4 files changed, 707 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am62l3-beaglebadge.dts
Signature · 1 line
2.54.0
#1 lore raw

PATCH v3 1/3 dt-bindings: arm: ti: Add am62l3-beaglebadge

This board is based on ti,am62l3.

https://beagleboard.org
https://github.com/beagleboard/BeagleBadge

---
Changelog:
- no change

---
 Documentation/devicetree/bindings/arm/ti/k3.yaml | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/arm/ti/k3.yaml +1 -0
index 2a6a9441c23de..d9cd3fb712fdd 100644
@@ -40,6 +40,7 @@ properties:
       - description: K3 AM62L3 SoC and Boards
         items:
           - enum:
+              - beagle,am62l3-beaglebadge
               - ti,am62l3-evm
           - const: ti,am62l3
 
Signature · 1 line
2.54.0
#3 lore raw

PATCH v3 2/3 arm64: dts: ti: Add k3-am62l3-beaglebadge

In reply to Judith Mendez

BeagleBoard.org BeagleBadge is a compact, affordable open source hardware single board computer based on the Texas Instruments AM62L3 SoC designed for IoT and embedded applications with low power consumption. Expansion is provided over open standards based headers including QWIIC and GPIO interfaces.

https://beagleboard.org
https://github.com/beagleboard/BeagleBadge

---
Changelog:
- PWM period: 255ns -> 10000000ns
- vdd_3v3 vin-supply: vsys_out -> vcc_3v3_main
- MCP23S18 reset muxmode: 4 -> 7
- Typo: FUEL_GUAGE_BATLOW -> FUEL_GAUGE_BATLOW
- sdhci2: Remove #address-cells & #size-cells

---
 arch/arm64/boot/dts/ti/Makefile               |   1 +
 .../boot/dts/ti/k3-am62l3-beaglebadge.dts     | 700 ++++++++++++++++++
 2 files changed, 701 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am62l3-beaglebadge.dts
arch/arm64/boot/dts/ti/Makefile +1 -0
index 5269c9619b65c..4e377ca011cd8 100644
@@ -41,6 +41,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am62d2-evm.dtb
 
 # Boards with AM62Lx SoCs
 dtb-$(CONFIG_ARCH_K3) += k3-am62l3-evm.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am62l3-beaglebadge.dtb
 
 # Boards with AM62Px SoC
 dtb-$(CONFIG_ARCH_K3) += k3-am62p5-sk.dtb
arch/arm64/boot/dts/ti/k3-am62l3-beaglebadge.dts new file +700 -0

700 lines not on this page · raw message

Signature · 1 line
2.54.0
#4 lore raw

Re: [PATCH v3 2/3] arm64: dts: ti: Add k3-am62l3-beaglebadge

Thank you for your contribution! Sashiko AI review found 3 potential issue(s) to consider: - [High] The `microchip,spi-present-mask` property is specified as an 8-bit value, which will cause the…

Thank you for your contribution! Sashiko AI review found 3 potential issue(s) to consider:
- [High] The microchip,spi-present-mask property is specified as an 8-bit value, which will cause the mcp23s18 driver probe to fail.
- [High] Missing bootph-all property on &wkup_i2c0 and its PMIC child node tps65214.
- [Low] Unnecessary inclusion of DT binding header files.
--

commit 14331975158856c05618604ffa3aca84008b3237
Author: Judith Mendez <[email protected]>

arm64: dts: ti: Add k3-am62l3-beaglebadge

This commit adds the device tree for the BeagleBoard.org BeagleBadge, a compact single board computer based on the TI AM62L3 SoC. It provides initial support including GPIOs, LEDs, regulators, and other peripherals.

Quoted 10 lines
arch/arm64/boot/dts/ti/k3-am62l3-beaglebadge.dts new file +4 -0
new file mode 100644
index 0000000000000..b7541e162a90d
@@ -0,0 +1,700 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * https://www.beagleboard.org/boards/beaglebadge
+ *

arch/arm64/boot/dts/ti/k3-am62l3-beaglebadge.dts line 14

Quoted 10 lines
arch/arm64/boot/dts/ti/k3-am62l3-beaglebadge.dts new file +10 -0
+ * Copyright (C) 2026 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/thermal/thermal.h>

Are these last two includes necessary?

It doesn't look like there are any DP83867 Ethernet PHY nodes in this device tree to use the networking macros.

Also, the thermal zone trip point uses a raw string literal for the type rather than the standard macros defined in thermal.h.

[ ... ]

arch/arm64/boot/dts/ti/k3-am62l3-beaglebadge.dts line 514

Quoted 8 lines
arch/arm64/boot/dts/ti/k3-am62l3-beaglebadge.dts new file +8 -0
+&wkup_i2c0 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_i2c0_pins_default>;
+	status = "okay";
+
+	tps65214: pmic@30 {
+		compatible = "ti,tps65214";

Will U-Boot SPL drop the I2C bus and PMIC from its device tree, failing to configure essential SoC voltages like VDD_CORE, VDD_1V8, and VDD_LPDDR4?

While the associated pinmux group wkup_i2c0_pins_default correctly specifies bootph-all, both the wkup_i2c0 controller node and the PMIC child node do not.

Could this prevent the board from booting?

[ ... ]

Quoted 5 lines
arch/arm64/boot/dts/ti/k3-am62l3-beaglebadge.dts new file +5 -0
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins_default>;
+	status = "okay";
+

arch/arm64/boot/dts/ti/k3-am62l3-beaglebadge.dts line 692

Quoted 10 lines
arch/arm64/boot/dts/ti/k3-am62l3-beaglebadge.dts new file +10 -0
+	mcp23s18: gpio@0 {
+		compatible = "microchip,mcp23s18";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		reset-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mcp23s18_reset_pins_default>;
+		microchip,spi-present-mask = /bits/ 8 <0x01>;

Will the mcp23s18 driver probe fail here because of the 8-bit mask value?

The driver in drivers/pinctrl/pinctrl-mcp23s08_spi.c attempts to read this using device_property_read_u32(), which expects a property of at least 4 bytes.

Reading a 1-byte property will cause the underlying of_property_read_variable_u32_array() to return -EOVERFLOW, which could completely disable the GPIO expander and its dependent peripherals.

Quoted 2 lines
arch/arm64/boot/dts/ti/k3-am62l3-beaglebadge.dts new file +2 -0
+	};
+};
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=2
#5 lore raw

PATCH v3 3/3 arm64: defconfig: Enable drivers for BeagleBadge

In reply to Judith Mendez

Enable drivers used on BeagleBadge[1]:
- LED PWM Multicolor driver as a module
- MCP SPI IO Expander driver as a module
- Seven Segment display GPIO driver as module
- Temperature Sensor driver as a module

[1] https://github.com/beagleboard/BeagleBadge

---
Changelog:
- Move config options as per make savedefconfig

---
 arch/arm64/configs/defconfig | 5 +++++
 1 file changed, 5 insertions(+)
arch/arm64/configs/defconfig +5 -0
index d905a0777f939..5cfb7f6f2ae78 100644
@@ -634,6 +634,7 @@ CONFIG_PINCTRL_BRCMSTB=y
 CONFIG_PINCTRL_BCM2712=y
 CONFIG_PINCTRL_DA9062=m
 CONFIG_PINCTRL_MAX77620=y
+CONFIG_PINCTRL_MCP23S08=m
 CONFIG_PINCTRL_RK805=m
 CONFIG_PINCTRL_SINGLE=y
 CONFIG_PINCTRL_SX150X=m
@@ -766,6 +767,7 @@ CONFIG_SENSORS_LM90=m
 CONFIG_SENSORS_PWM_FAN=m
 CONFIG_SENSORS_RASPBERRYPI_HWMON=m
 CONFIG_SENSORS_SL28CPLD=m
+CONFIG_SENSORS_SHT4x=m
 CONFIG_SENSORS_AMC6821=m
 CONFIG_SENSORS_INA2XX=m
 CONFIG_SENSORS_INA3221=m
@@ -955,6 +957,8 @@ CONFIG_VIDEO_IMX412=m
 CONFIG_VIDEO_OV5640=m
 CONFIG_VIDEO_OV5645=m
 CONFIG_VIDEO_S5KJN1=m
+CONFIG_AUXDISPLAY=y
+CONFIG_SEG_LED_GPIO=m
 CONFIG_DRM=m
 CONFIG_DRM_I2C_NXP_TDA998X=m
 CONFIG_DRM_HDLCD=m
@@ -1332,6 +1336,7 @@ CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_PWM=y
 CONFIG_LEDS_SYSCON=y
 CONFIG_LEDS_QCOM_FLASH=m
+CONFIG_LEDS_PWM_MULTICOLOR=m
 CONFIG_LEDS_QCOM_LPG=m
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_DISK=y
Signature · 1 line
2.54.0