Documentation: hwmon: lm75: document sysfs interface
Subsystems (2)
PATCH 1/1 Documentation: hwmon: lm75: document sysfs interface
Document the sysfs attributes supported by the lm75 driver.
The driver exposes temp1_input, temp1_max, temp1_max_hyst, and the standard update_interval attribute. Some chips also expose temp1_alarm.
Add a sysfs-Interface section to Documentation/hwmon/lm75.rst to describe the supported attributes and clarify that temp1_alarm and the write permissions of update_interval depend on the chip.
--- Documentation/hwmon/lm75.rst | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)
Documentation/hwmon/lm75.rst +18 -0
@@ -181,3 +181,21 @@ is supported by this driver, other specific enhancements are not. The LM77 is not supported, contrary to what we pretended for a long time. Both chips are simply not compatible, value encoding differs. + +sysfs-Interface +--------------- + +================ ============================================ +temp1_input temperature input +temp1_max maximum temperature +temp1_max_hyst maximum temperature hysteresis +================ ============================================ + +If supported by the chip, the following attribute is also available: + +================ ============================================ +temp1_alarm temperature alarm +================ ============================================ + +The standard update_interval attribute is also supported. Its write +permissions depend on the chip.
Signature · 1 line
2.53.0
[email protected]
AI reviewThank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider: - [Low] The newly added sysfs-Interface documentation omits the `temp1_label` attribute. --
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Low] The newly added sysfs-Interface documentation omits the temp1_label attribute. --
commit 9ea544e30685306c26501a73ae7941baf5244e12
Author: Chen-Shi-Hong <[email protected]>
Documentation: hwmon: lm75: document sysfs interface
This commit adds a new sysfs-Interface section to the lm75 driver documentation to describe the supported sysfs attributes.
Quoted 7 lines
Documentation/hwmon/lm75.rst +0
-0@@ -181,3 +181,21 @@ is supported by this driver, other specific enhancements are not. The LM77 is not supported, contrary to what we pretended for a long time.
Documentation/hwmon/lm75.rst is supported by this driver, other specific enhancements are not. · line 192
Quoted 10 lines
Documentation/hwmon/lm75.rst +9
-0Both chips are simply not compatible, value encoding differs. + +sysfs-Interface +--------------- + +================ ============================================ +temp1_input temperature input +temp1_max maximum temperature +temp1_max_hyst maximum temperature hysteresis +================ ============================================
Should this section also document the temp1_label attribute?
Looking at drivers/hwmon/lm75.c, the driver exposes the temp1_label attribute via HWMON_T_LABEL if a label device property is present.
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=1