USB: serial: belkin_sa: validate interrupt status length

The Belkin interrupt callback treats interrupt data as a four-byte status report and reads LSR/MSR fields at offsets 2 and 3. The interrupt-in buffer length is derived from endpoint wMaxPacketSize, and short interrupt transfers may complete successfully with a smaller actual_length.

Check the completed interrupt packet length before parsing status fields so short interrupt endpoints and short successful packets are ignored instead of causing out-of-bounds or stale status-byte reads.

KASAN report as below:

BUG: KASAN: slab-out-of-bounds in belkin_sa_read_int_callback()
Read of size 1
Call trace:
  belkin_sa_read_int_callback() (drivers/usb/serial/belkin_sa.c:202)
  __usb_hcd_giveback_urb() (drivers/usb/core/hcd.c:1630)
  dummy_timer() (?:?)
  __hrtimer_run_queues() (kernel/time/hrtimer.c:1968)
  hrtimer_run_softirq() (kernel/time/hrtimer.c:2001)
  handle_softirqs() (kernel/softirq.c:579)

---
v2:
- Drop the transfer_buffer_length check; urb->actual_length is bounded by the URB transfer buffer length.
- Add the KASAN validation report.
- Add Assisted-by tag.

 drivers/usb/serial/belkin_sa.c | 2 ++
 1 file changed, 2 insertions(+)

index 38ac910b1082d..1e0d9041969b3 100644
@@ -193,6 +193,8 @@ static void belkin_sa_read_int_callback(struct urb *urb)
 	}
 
 	usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data);
+	if (urb->actual_length < BELKIN_SA_MSR_INDEX + 1)
+		goto exit;
 
 	/* Handle known interrupt data */
 	/* ignore data[0] and data[1] */

2.43.0

Applied, thanks.

Johan