iio: accel: bmc150: use guard(mutex) for mutex handling
PATCH v2 1/1 iio: accel: bmc150: use guard(mutex) for mutex handling
Replace manual mutex_lock()/mutex_unlock() pairs with guard(mutex) and scoped_guard() from cleanup.h. This simplifies error paths by removing the need for explicit unlock calls before returning.
Most converted functions hold the lock for their entire body, so guard(mutex) applies directly. bmc150_accel_trigger_handler() only holds the lock around a single register read, so scoped_guard() is used there to keep the lock scope unchanged.
---
Changes since v1:
- Drop the verbose list of converted functions from the commit message.
- bmc150_accel_get_temp(): keep the original declaration order; no unrelated line movement.
- bmc150_accel_get_axis(): convert to guard(mutex) as well, the only code outside the old lock scope was a trivial error check.
- bmc150_accel_trigger_handler(): use scoped_guard() so that no manual mutex_lock()/mutex_unlock() pairs are left behind.
- bmc150_accel_get_fifo_watermark() / bmc150_accel_get_fifo_state():
drop the intermediate variable and return directly.
drivers/iio/accel/bmc150-accel-core.c | 68 ++++++++------------------- 1 file changed, 20 insertions(+), 48 deletions(-)
drivers/iio/accel/bmc150-accel-core.c +20 -48
@@ -7,6 +7,7 @@#include <linux/module.h> #include <linux/i2c.h> #include <linux/interrupt.h> +#include <linux/cleanup.h> #include <linux/delay.h> #include <linux/slab.h> #include <linux/acpi.h>
@@ -600,18 +601,15 @@ static int bmc150_accel_get_temp(struct bmc150_accel_data *data, int *val)int ret;unsigned int value; -mutex_lock (&data->mutex); +guard (mutex)(&data->mutex); ret =regmap_read (data->regmap,BMC150_ACCEL_REG_TEMP , &value);if (ret <0 ) {dev_err (dev,"Error reading reg_temp\n" ); -mutex_unlock (&data->mutex);return ret; } *val =sign_extend32 (value,7 ); -mutex_unlock (&data->mutex); -return IIO_VAL_INT ; }
@@ -624,25 +622,21 @@ static int bmc150_accel_get_axis(struct bmc150_accel_data *data,int axis = chan->scan_index;__le16 raw_val; -mutex_lock (&data->mutex); +guard (mutex)(&data->mutex); ret =bmc150_accel_set_power_state (data, true); -if (ret <0 ) { -mutex_unlock (&data->mutex); +if (ret <0 )return ret; - } ret =regmap_bulk_read (data->regmap,BMC150_ACCEL_AXIS_TO_REG (axis), &raw_val,sizeof (raw_val));if (ret <0 ) {dev_err (dev,"Error reading axis %d\n" , axis);bmc150_accel_set_power_state (data, false); -mutex_unlock (&data->mutex);return ret; } *val =sign_extend32 (le16_to_cpu (raw_val) >> chan->scan_type.shift, chan->scan_type.realbits -1 ); ret =bmc150_accel_set_power_state (data, false); -mutex_unlock (&data->mutex);if (ret <0 )return ret;
@@ -810,17 +804,14 @@ static int bmc150_accel_write_event_config(struct iio_dev *indio_dev,if (state == data->ev_enable_state)return 0 ; -mutex_lock (&data->mutex); +guard (mutex)(&data->mutex); ret =bmc150_accel_set_interrupt (data,BMC150_ACCEL_INT_ANY_MOTION , state); -if (ret <0 ) { -mutex_unlock (&data->mutex); +if (ret <0 )return ret; - } data->ev_enable_state = state; -mutex_unlock (&data->mutex);return 0 ; }
@@ -845,13 +836,10 @@ static ssize_t bmc150_accel_get_fifo_watermark(struct device *dev, {struct iio_dev *indio_dev =dev_to_iio_dev (dev);struct bmc150_accel_data *data =iio_priv (indio_dev); -int wm; -mutex_lock (&data->mutex); - wm = data->watermark; -mutex_unlock (&data->mutex); +guard (mutex)(&data->mutex); -return sysfs_emit (buf,"%d\n" , wm); +return sysfs_emit (buf,"%d\n" , data->watermark); } static ssize_t bmc150_accel_get_fifo_state(struct device *dev,
@@ -860,13 +848,10 @@ static ssize_t bmc150_accel_get_fifo_state(struct device *dev, {struct iio_dev *indio_dev =dev_to_iio_dev (dev);struct bmc150_accel_data *data =iio_priv (indio_dev); -bool state; -mutex_lock (&data->mutex); - state = data->fifo_mode; -mutex_unlock (&data->mutex); +guard (mutex)(&data->mutex); -return sysfs_emit (buf,"%d\n" , state); +return sysfs_emit (buf,"%d\n" , data->fifo_mode); } static const struct iio_mount_matrix *
@@ -906,9 +891,8 @@ static int bmc150_accel_set_watermark(struct iio_dev *indio_dev, unsigned val)if (val >BMC150_ACCEL_FIFO_LENGTH ) val =BMC150_ACCEL_FIFO_LENGTH ; -mutex_lock (&data->mutex); +guard (mutex)(&data->mutex); data->watermark = val; -mutex_unlock (&data->mutex);return 0 ; }
@@ -1021,13 +1005,10 @@ static int __bmc150_accel_fifo_flush(struct iio_dev *indio_dev,static int bmc150_accel_fifo_flush (struct iio_dev *indio_dev,unsigned samples) {struct bmc150_accel_data *data =iio_priv (indio_dev); -int ret; -mutex_lock (&data->mutex); - ret =__bmc150_accel_fifo_flush (indio_dev, samples, false); -mutex_unlock (&data->mutex); +guard (mutex)(&data->mutex); -return ret; +return __bmc150_accel_fifo_flush (indio_dev, samples, false); } static IIO_CONST_ATTR_SAMP_FREQ_AVAIL(
@@ -1187,10 +1168,9 @@ static irqreturn_t bmc150_accel_trigger_handler(int irq, void *p)struct bmc150_accel_data *data =iio_priv (indio_dev);int ret; -mutex_lock (&data->mutex); - ret =regmap_bulk_read (data->regmap,BMC150_ACCEL_REG_XOUT_L , - data->buffer,AXIS_MAX *2 ); -mutex_unlock (&data->mutex); +scoped_guard (mutex, &data->mutex) + ret = regmap_bulk_read(data->regmap, BMC150_ACCEL_REG_XOUT_L, + data->buffer,AXIS_MAX *2 );if (ret <0 ) goto err_read;
@@ -1230,31 +1210,23 @@ static int bmc150_accel_trigger_set_state(struct iio_trigger *trig,struct bmc150_accel_data *data = t->data;int ret; -mutex_lock (&data->mutex); +guard (mutex)(&data->mutex); -if (t->enabled == state) { -mutex_unlock (&data->mutex); +if (t->enabled == state)return 0 ; - }if (t->setup) { ret = t->setup (t, state); -if (ret <0 ) { -mutex_unlock (&data->mutex); +if (ret <0 )return ret; - } } ret =bmc150_accel_set_interrupt (data, t->intr, state); -if (ret <0 ) { -mutex_unlock (&data->mutex); +if (ret <0 )return ret; - } t->enabled = state; -mutex_unlock (&data->mutex); -return ret; }
Signature · 1 line
2.33.0
Jonathan Cameron
maintainerQuoted 10 lines · On Wed, 20 May 2026 11:12:47 +0100 Gabriel Rondon <[email protected]> wrote:
Replace manual mutex_lock()/mutex_unlock() pairs with guard(mutex) and
scoped_guard()fromcleanup.h. This simplifies error paths by removing the need for explicit unlock calls before returning.Most converted functions hold the lock for their entire body, so guard(mutex) applies directly.
bmc150_accel_trigger_handler()only holds the lock around a single register read, soscoped_guard()is used there to keep the lock scope unchanged.Signed-off-by Gabriel Rondon <[email protected]>
So sashiko reports a load of preexisting issues (I haven't checked them but it tends to be right most of the time). It spotted one issue in your changes that i missed.
The only other 'this patch' thing was scoped_guard() + gotos. The particular case you have is fine so don't worry about that.
drivers/iio/accel/bmc150-accel-core.c static ssize_t bmc150_accel_get_fifo_state(struct device *dev, · line 866
Quoted 9 lines
static
ssize_tbmc150_accel_get_fifo_state(struct device *dev,drivers/iio/accel/bmc150-accel-core.c +0
-3@@ -860,13 +848,10 @@ static ssize_t bmc150_accel_get_fifo_state(struct device *dev, {struct iio_dev *indio_dev =dev_to_iio_dev (dev);struct bmc150_accel_data *data =iio_priv (indio_dev); -bool state; -mutex_lock (&data->mutex); - state = data->fifo_mode;
This cast an integer to a bool. So 0x40 -> true.
drivers/iio/accel/bmc150-accel-core.c static ssize_t bmc150_accel_get_fifo_state(struct device *dev, · line 854
Quoted 5 lines
drivers/iio/accel/bmc150-accel-core.c +2
-2-mutex_unlock (&data->mutex); +guard (mutex)(&data->mutex); -return sysfs_emit (buf,"%d\n" , state); +return sysfs_emit (buf,"%d\n" , data->fifo_mode);
This will just print that 0x40 (in decimal) whereas should be 0 or 1. I'd suggest data->fifo_mode ? 1 : 0 in this call.
Quoted 2 lines
(quoted diff) +0
-0}