This series introduces initial U-Boot support for mach-axiado AX3005 SCM3005 board, a quad-core ARM Cortex-A53 (ARMv8/ARM64) platform.
Subsystems (3)
v2 cover This series introduces initial U-Boot support for mach-axiado AX3005 SCM3005 board, a quad-core ARM Cortex-A53 (ARMv8/ARM64) platform.
Patch 1 adds the device tree files: an SoC-level DTSI describing GIC-v3, Cadence/Zynq UART, a fixed reference clock, and spin-table secondary CPU boot, plus a board-level DTS setting the console to uart3 at 115200 baud with 2 GB DRAM at 0x80000000.
Patch 2 adds mach-axiado to support Axiado SoC-based boards, Kconfig plumbing (AXIADO_AX3005 and TARGET_SCM3005), defconfig, board source with ft_board_setup() and a MAINTAINERS entry.
Tested on SCM3005 EVK hardware
B4-Revision: 2
To: [email protected]
Cc: Tom Rini <[email protected]>
Cc: Siu Ming Tong <[email protected]>
Cc: Prasad Bolisetty <[email protected]>
Cc: Andre Przywara <[email protected]>
Cc: Tzu-Hao Wei <[email protected]>
Cc: Simon Glass <[email protected]>
Cc: Neil Armstrong <[email protected]>
Cc: Sumit Garg <[email protected]>
---
---
Changes in v2:
- Added new mach-axiado with support for SCM3005 boards.
- Link to v1: https://lore.kernel.org/r/[email protected]
---
Siu Ming Tong (2):
arm64: dts: axiado: Add AX3005 SCM3005 device tree
grm: axiado: Add AX3005 based SCM3005 board support
MAINTAINERS | 11 +++ arch/arm/Kconfig | 9 +++ arch/arm/dts/Makefile | 1 + arch/arm/dts/ax3005-scm3005.dts | 28 ++++++++ arch/arm/dts/ax3005.dtsi | 100 +++++++++++++++++++++++++++ arch/arm/mach-axiado/Kconfig | 22 ++++++ arch/arm/mach-axiado/Makefile | 6 ++ arch/arm/mach-axiado/scm3005/Kconfig | 11 +++ board/axiado/scm3005/Kconfig | 15 ++++ board/axiado/scm3005/Makefile | 5 ++ board/axiado/scm3005/scm3005.c | 128 +++++++++++++++++++++++++++++++++++ configs/ax3005_scm3005_defconfig | 74 ++++++++++++++++++++ include/configs/ax3005-scm3005.h | 29 ++++++++ 13 files changed, 439 insertions(+)
---
base-commit: 052988aa29bfd506d7ce207fbb3f5374a5dbecbb
change-id: 20260519-review-db509386f7b7
Best regards,
Signature · 1 line
smtong <[email protected]>
PATCH v2 1/2 arm64: dts: axiado: Add AX3005 SCM3005 device tree
Add device tree source files for the Axiado AX3005 SCM3005 board. The AX3005 is a quad-core 64-bit ARMv8 Cortex-A53 SoC.
The DTSI describes the SoC-level nodes: GIC-v3 interrupt controller, Cadence/Zynq UART, fixed reference clock, and spin-table secondary CPU boot. A /memreserve/ directive protects the spin-table release address at 0x80002fa0 from being overwritten during boot.
The SCM3005 DTS sets the console to uart3 at 115200 baud and declares 2 GB of DRAM starting at 0x80000000.
--- arch/arm/dts/Makefile | 1 + arch/arm/dts/ax3005-scm3005.dts | 28 +++++++++++ arch/arm/dts/ax3005.dtsi | 100 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 129 insertions(+)
arch/arm/dts/Makefile +1 -0
@@ -4,6 +4,7 @@ dtb-$(CONFIG_TARGET_SMARTWEB) += at91sam9260-smartweb.dtb dtb-$(CONFIG_TARGET_TAURUS) += at91sam9g20-taurus.dtb dtb-$(CONFIG_TARGET_CORVUS) += at91sam9g45-corvus.dtb dtb-$(CONFIG_TARGET_GURNARD) += at91sam9g45-gurnard.dtb +dtb-$(CONFIG_TARGET_SCM3005) += ax3005-scm3005.dtb dtb-$(CONFIG_TARGET_SMDKC100) += s5pc1xx-smdkc100.dtb dtb-$(CONFIG_TARGET_S5P_GONI) += s5pc1xx-goni.dtb
arch/arm/dts/ax3005-scm3005.dts new file +28 -0
@@ -0,0 +1,28 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (c) 2021-2026 Axiado Corporation (or its affiliates). + */ + +/dts-v1/; + +#include "ax3005.dtsi" + +/ { + model = "Axiado AX3005 SCM3005"; + compatible = "axiado,ax3005-scm3005", "axiado,ax3005"; + #address-cells = <2>; + #size-cells = <2>; + + chosen { + stdout-path = "serial3:115200"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x00 0x80000000 0x00 0x80000000>; + }; +}; + +&uart3 { + status = "okay"; +};
arch/arm/dts/ax3005.dtsi new file +100 -0
100 lines not on this page · raw message
Signature · 1 line
2.34.1
PATCH v2 2/2 grm: axiado: Add AX3005 based SCM3005 board support
In reply to Siu Ming TongIntroduce mach-axiado to support Axiado SoC-based boards. This adds the platform Kconfig and build infrastructure, along with initial SCM3005 board support using the AX3005 SoC.
Introduces AXIADO_AX3005, which selects ARM64, driver
model, GIC-v3, and Zynq UART. TARGET_SCM3005 selects ARCH_AXIADO, allowing future SoC variants to share the platform configuration. Secondary cores use spin-table boot. ft_board_setup() corrects the cpu-release-addr in the FDT, which arch_fixup_fdt() overwrites with the post-relocation address.
Add U-Boot board support for the Axiado AX3005 based targets, a quad-core ARM Cortex-A53 (ARMv8) platform.
--- MAINTAINERS | 11 +++ arch/arm/Kconfig | 9 +++ arch/arm/mach-axiado/Kconfig | 22 ++++++ arch/arm/mach-axiado/Makefile | 6 ++ arch/arm/mach-axiado/scm3005/Kconfig | 11 +++ board/axiado/scm3005/Kconfig | 15 ++++ board/axiado/scm3005/Makefile | 5 ++ board/axiado/scm3005/scm3005.c | 128 +++++++++++++++++++++++++++++++++++ configs/ax3005_scm3005_defconfig | 74 ++++++++++++++++++++ include/configs/ax3005-scm3005.h | 29 ++++++++ 10 files changed, 310 insertions(+)
MAINTAINERS +11 -0
@@ -213,6 +213,17 @@ F: drivers/reset/reset-ast2500.c F: drivers/watchdog/ast_wdt.c N: aspeed +ARM AXIADO AX3005 SCM3005 +M: Siu Ming Tong <[email protected]> +M: Karthikeyan Mitran <[email protected]> +M: Prasad Bolisetty <[email protected]> +S: Maintained +F: arch/arm/dts/ax3005* +F: arch/arm/mach-axiado/ +F: board/axiado/scm3005/ +F: configs/ax3005_scm3005_defconfig +F: include/configs/ax3005-scm3005.h + ARM BROADCOM BCM283X / BCM27XX M: Matthias Brugger <[email protected]> M: Peter Robinson <[email protected]>
arch/arm/Kconfig +9 -0
@@ -2152,6 +2152,13 @@ config ARCH_ASPEED select OF_CONTROL imply CMD_DM +config ARCH_AXIADO + bool "Support Axiado SoCs" + select AXIADO_AX3005 + help + Support for Axiado AX-series SoCs such as the AX3005. + These ARM64 SoCs are used in BMC and security applications. + config TARGET_DURIAN bool "Support Phytium Durian Platform" select ARM64
@@ -2293,6 +2300,8 @@ source "arch/arm/mach-aspeed/Kconfig" source "arch/arm/mach-at91/Kconfig" +source "arch/arm/mach-axiado/Kconfig" + source "arch/arm/mach-bcm283x/Kconfig" source "arch/arm/mach-bcmbca/Kconfig"
arch/arm/mach-axiado/Kconfig new file +22 -0
@@ -0,0 +1,22 @@ +if ARCH_AXIADO + +config SYS_ARCH + default "arm" + +config SYS_SOC + default "axiado" + +config AXIADO_AX3005 + bool + select ARM64 + select ARMV8_SWITCH_TO_EL1 + select DM + select DM_SERIAL + select GICV3 + select ZYNQ_SERIAL + select MMC_SDHCI_AXIADO + select PHY_AXIADO_EMMC + +source "arch/arm/mach-axiado/scm3005/Kconfig" + +endif
arch/arm/mach-axiado/Makefile new file +6 -0
@@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (c) 2021-2026 Axiado Corporation (or its affiliates). +# + +obj-$(CONFIG_AXIADO_AX3005) += scm3005/
arch/arm/mach-axiado/scm3005/Kconfig new file +11 -0
@@ -0,0 +1,11 @@ +if AXIADO_AX3005 + +config TARGET_SCM3005 + bool "Support Axiado AX3005 SCM3005" + help + Support for the Axiado AX3005 SCM3005 board. + Based on the Axiado AX3005 quad-core ARMv8 Cortex-A53 SoC. + +source "board/axiado/scm3005/Kconfig" + +endif
board/axiado/scm3005/Kconfig new file +15 -0
@@ -0,0 +1,15 @@ +if TARGET_SCM3005 + +config SYS_BOARD + string + default "scm3005" + +config SYS_VENDOR + string + default "axiado" + +config SYS_CONFIG_NAME + string + default "ax3005-scm3005" + +endif
board/axiado/scm3005/Makefile new file +5 -0
@@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (c) 2021-2026 Axiado Corporation (or its affiliates). + +obj-y := scm3005.o
board/axiado/scm3005/scm3005.c new file +128 -0
128 lines not on this page · raw message
configs/ax3005_scm3005_defconfig new file +74 -0
74 lines not on this page · raw message
include/configs/ax3005-scm3005.h new file +29 -0
@@ -0,0 +1,29 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* Copyright (c) 2021-2026 Axiado Corporation (or its affiliates). +*/ + +#ifndef __AX3005_SCM3005_H +#define __AX3005_SCM3005_H + +#include <linux/sizes.h> + +#define GICD_BASE 0x40400000 +#define GICR_BASE 0x40500000 + +#define SYS_TIMER_CTRL 0x48016000 +#define SYS_TIMER_ENABLE 0x1 +#define SYS_TIMER_DISABLE 0x0 + +/* DRAM: 2 GB at 0x80000000 */ +#define CFG_SYS_SDRAM_BASE 0x80000000 +#define CFG_SYS_SDRAM_SIZE SZ_2G +#define CFG_SYS_INIT_SP_ADDR (CFG_SYS_SDRAM_BASE + SZ_1M) + +#define CFG_SYS_MAXARGS 64 +#define CFG_SYS_BARGSIZE CFG_SYS_CBSIZE + +#define CFG_SYS_BAUDRATE_TABLE \ + { 4800, 9600, 19200, 38400, 57600, 115200 } + +#endif /* __AX3005_SCM3005_H */
Signature · 1 line
2.34.1
Quoted 22 lines · Siu Ming Tong
Patch 1 adds the device tree files: an SoC-level DTSI describing GIC-v3, Cadence/Zynq UART, a fixed reference clock, and spin-table secondary CPU boot, plus a board-level DTS setting the console to uart3 at 115200 baud with 2 GB DRAM at
0x80000000.Patch 2 adds mach-axiado to support Axiado SoC-based boards,
Kconfigplumbing (AXIADO_AX3005andTARGET_SCM3005), defconfig, board source withft_board_setup()and aMAINTAINERSentry.Tested on SCM3005 EVK hardware
B4-Revision: 2
To: [email protected]
Cc: Tom Rini <[email protected]>
Cc: Siu Ming Tong <[email protected]>
Cc: Prasad Bolisetty <[email protected]>
Cc: Andre Przywara <[email protected]>
Cc: Tzu-Hao Wei <[email protected]>
Cc: Simon Glass <[email protected]>
Cc: Neil Armstrong <[email protected]>
Cc: Sumit Garg <[email protected]>
Quoted 6 lines
Signed-off-by smtong <[email protected]>---
---
Changes in v2:
- Added new mach-axiado with support for SCM3005 boards.
- Link to v1: https://lore.kernel.org/r/[email protected]
My questions to v1 were not answered, please go back and reply, thanks.
Signature · 1 line
Tom
Quoted 10 lines · Siu Ming Tong
Patch 1 adds the device tree files: an SoC-level DTSI describing GIC-v3, Cadence/Zynq UART, a fixed reference clock, and spin-table secondary CPU boot, plus a board-level DTS setting the console to uart3 at 115200 baud with 2 GB DRAM at
0x80000000.Patch 2 adds mach-axiado to support Axiado SoC-based boards,
Kconfigplumbing (AXIADO_AX3005andTARGET_SCM3005), defconfig, board source withft_board_setup()and aMAINTAINERSentry.[...]
Applied to u-boot/next, thanks!
[1/2] arm64: dts: axiado: Add AX3005 SCM3005 device tree
commit: 7a06f03e575df25d34cf4085000e21ea97082ab6
[2/2] grm: axiado: Add AX3005 based SCM3005 board support
commit: 3f1821162638acc34b47b6c68f3bc8bab365c08dSignature · 1 line
Tom