Skip to contentSkip to conversation

kbuild: distributed build support for Clang ThinLTO

PATCH Superseded [email protected] 2 participants 7 messages May 28 – May 29 Kbuild

v11 of 12 Superseded Latest is v12 →

lore
Share & tools
lore
#0 lore raw

v11 cover kbuild: distributed build support for Clang ThinLTO

From: Rong Xu <[email protected]>

ChangeLog:

V11: Integrated feedback from Sashiko (Nathan Chancellor):
(1) Included modkern_cflags within the saved _c_flags.
(2) Replaced the shell command with $(saved_c_flags_$(<)).
(3) Refined the file matching for ar_vmlinux.a.

V10:  Fixed a minor build error in v9 and added comments.
V9:  Fixed a minor build error.
V8:  Disabled -always-rename-promoted-locals=false for the distrubute

mode, based on Yonghong and Nathan's comments.
V7: (1) Resolved a conflict by rebasing to kbuild/kbuild-next-unstable.
(2) Separated the '--thin' to 'T' change into its own patch to preserve Masahiro's original version.
V6: Change '--thin' back to 'T' in Makefile.vmlinux_a to fix
reported the build error from old ar.
V5: Handle single quote escaping in echo _c_flags to fix
Piotr Gorski's reported error.
V4: This is based on the reimplementation provided by Masahiro Yamada on May 26. The difference is that this version now saves the compiler flags (_c_flags) from the Front-End (FE) compilation and re-uses them for the subsequent Back-End (BE) compilation.

Rong Xu (3):
kbuild: move vmlinux.a build rule to scripts/Makefile.vmlinux_a
kbuild: change --thin back to 'T' in $(AR)
kbuild: distributed build support for Clang ThinLTO

 .gitignore                 |  2 +
 Makefile                   | 30 +++++++-------
 arch/Kconfig               | 19 +++++++++
 scripts/Makefile.lib       |  8 ++++
 scripts/Makefile.thinlto   | 41 +++++++++++++++++++
 scripts/Makefile.vmlinux_a | 83 ++++++++++++++++++++++++++++++++++++++
 scripts/mod/modpost.c      | 15 +++++--
 7 files changed, 181 insertions(+), 17 deletions(-)
 create mode 100644 scripts/Makefile.thinlto
 create mode 100644 scripts/Makefile.vmlinux_a

base-commit: 2c31897a17e55a6da529b4e797e98c6febc60fd2

Signature · 1 line
2.54.0.823.g6e5bcc1fc9-goog
#1 lore raw

PATCH v11 1/3 kbuild: move vmlinux.a build rule to scripts/Makefile.vmlinux_a

From: Rong Xu <[email protected]>

From: Masahiro Yamada <[email protected]>

Move the build rule for vmlinux.a to a separate file in preparation for supporting distributed builds with Clang ThinLTO.

---
 Makefile                   | 16 +++++--------
 scripts/Makefile.vmlinux_a | 46 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 52 insertions(+), 10 deletions(-)
 create mode 100644 scripts/Makefile.vmlinux_a
Makefile +6 -10
index e27c91ea56fc..0fce9557a115 100644
@@ -1291,7 +1291,7 @@ export ARCH_DRIVERS	:= $(drivers-y) $(drivers-m)
 KBUILD_VMLINUX_OBJS := built-in.a $(patsubst %/, %/lib.a, $(filter %/, $(libs-y)))
 KBUILD_VMLINUX_LIBS := $(filter-out %/, $(libs-y))
 
-export KBUILD_VMLINUX_LIBS
+export KBUILD_VMLINUX_OBJS KBUILD_VMLINUX_LIBS
 export KBUILD_LDS          := arch/$(SRCARCH)/kernel/vmlinux.lds
 
 ifdef CONFIG_TRIM_UNUSED_KSYMS
@@ -1300,16 +1300,12 @@ ifdef CONFIG_TRIM_UNUSED_KSYMS
 KBUILD_MODULES := y
 endif
 
-# '$(AR) mPi' needs 'T' to workaround the bug of llvm-ar <= 14
-quiet_cmd_ar_vmlinux.a = AR      $@
-      cmd_ar_vmlinux.a = \
-	rm -f $@; \
-	$(AR) cDPrST $@ $(KBUILD_VMLINUX_OBJS); \
-	$(AR) mPiT $$($(AR) t $@ | sed -n 1p) $@ $$($(AR) t $@ | grep -F -f $(srctree)/scripts/head-object-list.txt)
+PHONY += vmlinux_a
+vmlinux_a: $(KBUILD_VMLINUX_OBJS) scripts/head-object-list.txt FORCE
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.vmlinux_a
 
-targets += vmlinux.a
-vmlinux.a: $(KBUILD_VMLINUX_OBJS) scripts/head-object-list.txt FORCE
-	$(call if_changed,ar_vmlinux.a)
+vmlinux.a: vmlinux_a
+	@:
 
 PHONY += vmlinux_o
 vmlinux_o: vmlinux.a $(KBUILD_VMLINUX_LIBS)
scripts/Makefile.vmlinux_a new file +46 -0

46 lines not on this page · raw message

Signature · 1 line
2.54.0.823.g6e5bcc1fc9-goog
#2 lore raw

PATCH v11 2/3 kbuild: change --thin back to 'T' in $(AR)

In reply to [email protected]

From: Rong Xu <[email protected]>

The '-T' flag in $(AR) is no longer problematic since the minimum requirement for LLVM has been updated to version 15. As of LLVM 14 and onward, the '-T' flag functions identically to the '--thin' flag.

Fixed the issue seen on IBM Power11 System:
ar: unrecognized option '--thin'

---
 scripts/Makefile.vmlinux_a | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
scripts/Makefile.vmlinux_a +3 -3
index 9774f02b43b2..650d44330d1f 100644
@@ -10,12 +10,12 @@ include $(srctree)/scripts/Makefile.lib
 # Link of built-in-fixup.a
 # ---------------------------------------------------------------------------
 
-# '$(AR) mPi' needs --thin to workaround the bug of llvm-ar <= 14
+# '$(AR) mPi' needs 'T' to workaround the bug of llvm-ar <= 14
 quiet_cmd_ar_builtin_fixup = AR      $@
       cmd_ar_builtin_fixup = \
 	rm -f $@; \
-	$(AR) cDPrS --thin $@ $(KBUILD_VMLINUX_OBJS); \
-	$(AR) mPi --thin $$($(AR) t $@ | sed -n 1p) $@ $$($(AR) t $@ | grep -F -f $(srctree)/scripts/head-object-list.txt)
+	$(AR) cDPrST $@ $(KBUILD_VMLINUX_OBJS); \
+	$(AR) mPiT $$($(AR) t $@ | sed -n 1p) $@ $$($(AR) t $@ | grep -F -f $(srctree)/scripts/head-object-list.txt)
 
 targets += built-in-fixup.a
 built-in-fixup.a: $(KBUILD_VMLINUX_OBJS) scripts/head-object-list.txt FORCE
Signature · 1 line
2.54.0.823.g6e5bcc1fc9-goog
#3 lore raw

PATCH v11 3/3 kbuild: distributed build support for Clang ThinLTO

In reply to [email protected]

From: Rong Xu <[email protected]>

Add distributed ThinLTO build support for the Linux kernel. This new mode offers several advantages: (1) Increased flexibility in handling user-specified build options.
(2) Improved user-friendliness for developers. (3) Greater convenience for integrating with objtool and livepatch.

Note that "distributed" in this context refers to a term that differentiates in-process ThinLTO builds by invoking backend compilation through the linker, not necessarily building in distributed environments.

Distributed ThinLTO is enabled via the CONFIG_LTO_CLANG_THIN_DIST Kconfig option. For example:

Quoted 4 lines

make LLVM=1 defconfig
scripts/config -e LTO_CLANG_THIN_DIST
make LLVM=1 oldconfig
make LLVM=1 vmlinux -j <..>

The build flow proceeds in four stages:
1. Perform FE compilation, mirroring the in-process ThinLTO mode.
2. Thin-link the generated IR files and object files.
3. Find all IR files and perform BE compilation, using the flags stored in the .*.o.cmd files.
4. Link the BE results to generate the final vmlinux.o.

NOTE: This patch currently implements the build for the main kernel image (vmlinux) only. Kernel module support is planned for a subsequent patch.

Tested on the following arch: x86, arm64, loongarch, and riscv.

The earlier implementation details can be found here:
https://discourse.llvm.org/t/rfc-distributed-thinlto-build-for-kernel/85934

---
 .gitignore                 |  2 ++
 Makefile                   | 14 +++++++++----
 arch/Kconfig               | 19 ++++++++++++++++++
 scripts/Makefile.lib       |  8 ++++++++
 scripts/Makefile.thinlto   | 41 ++++++++++++++++++++++++++++++++++++++
 scripts/Makefile.vmlinux_a | 37 ++++++++++++++++++++++++++++++++++
 scripts/mod/modpost.c      | 15 +++++++++++---
 7 files changed, 129 insertions(+), 7 deletions(-)
 create mode 100644 scripts/Makefile.thinlto
.gitignore +2 -0
index 3044b9590f05..1cc34c9a5523 100644
@@ -57,6 +57,7 @@
 *.zst
 Module.symvers
 dtbs-list
+builtin.order
 modules.order
 
 #
@@ -68,6 +69,7 @@ modules.order
 /vmlinux.32
 /vmlinux.map
 /vmlinux.symvers
+/vmlinux.thinlto-index
 /vmlinux.unstripped
 /vmlinux-gdb.py
 /vmlinuz
Makefile +10 -4
index 0fce9557a115..857f08dcc952 100644
@@ -1071,11 +1071,16 @@ export CC_FLAGS_SCS
 endif
 
 ifdef CONFIG_LTO_CLANG
-ifdef CONFIG_LTO_CLANG_THIN
+ifdef CONFIG_LTO_CLANG_FULL
+CC_FLAGS_LTO	:= -flto
+else
 CC_FLAGS_LTO	:= -flto=thin -fsplit-lto-unit
+
+# These LLVM options were initially added with only in-process ThinLTO
+# support, so avoid distributed ThinLTO support for now.
+ifdef CONFIG_LTO_CLANG_THIN
 KBUILD_LDFLAGS += $(call ld-option,--lto-whole-program-visibility -mllvm -always-rename-promoted-locals=false)
-else
-CC_FLAGS_LTO	:= -flto
+endif
 endif
 CC_FLAGS_LTO	+= -fvisibility=hidden
 
@@ -1684,6 +1689,7 @@ endif # CONFIG_MODULES
 CLEAN_FILES += vmlinux.symvers modules-only.symvers \
 	       modules.builtin modules.builtin.modinfo modules.nsdeps \
 	       modules.builtin.ranges vmlinux.o.map vmlinux.unstripped \
+	       vmlinux.thinlto-index builtin.order \
 	       compile_commands.json rust/test \
 	       rust-project.json .vmlinux.objs .vmlinux.export.c \
                .builtin-dtbs-list .builtin-dtbs.S
@@ -2145,7 +2151,7 @@ clean: $(clean-dirs)
 	$(call cmd,rmfiles)
 	@find . $(RCS_FIND_IGNORE) \
 		\( -name '*.[aios]' -o -name '*.rsi' -o -name '*.ko' -o -name '.*.cmd' \
-		-o -name '*.ko.*' \
+		-o -name '*.ko.*' -o -name '*.o.thinlto.bc' \
 		-o -name '*.dtb' -o -name '*.dtbo' \
 		-o -name '*.dtb.S' -o -name '*.dtbo.S' \
 		-o -name '*.dt.yaml' -o -name 'dtbs-list' \
arch/Kconfig +19 -0
index e86880045158..082483a3bbf8 100644
@@ -861,6 +861,25 @@ config LTO_CLANG_THIN
 	    https://clang.llvm.org/docs/ThinLTO.html
 
 	  If unsure, say Y.
+
+config LTO_CLANG_THIN_DIST
+	bool "Clang ThinLTO in distributed mode (EXPERIMENTAL)"
+	depends on HAS_LTO_CLANG && ARCH_SUPPORTS_LTO_CLANG_THIN
+	select LTO_CLANG
+	help
+	  This option enables Clang's ThinLTO in distributed build mode.
+	  In this mode, the linker performs the thin-link, generating
+	  ThinLTO index files. Subsequently, the build system explicitly
+	  invokes ThinLTO backend compilation using these index files
+	  and pre-linked IR objects. The resulting native object files
+	  are with the .thinlto-native.o suffix.
+
+	  This build mode offers improved visibility into the ThinLTO
+	  process through explicit subcommand exposure. It also makes
+	  final native object files directly available, benefiting
+	  tools like objtool and kpatch. Additionally, it provides
+	  crucial granular control over back-end options, enabling
+	  module-specific compiler options, and simplifies debugging.
 endchoice
 
 config ARCH_SUPPORTS_AUTOFDO_CLANG
scripts/Makefile.lib +8 -0
index 0718e39cedda..86e1428cc55d 100644
@@ -249,6 +249,13 @@ ifdef CONFIG_LTO_CLANG
 cmd_ld_single = $(if $(objtool-enabled)$(is-single-obj-m), ; $(LD) $(ld_flags) -r -o $(tmp-target) $@; mv $(tmp-target) $@)
 endif
 
+ifdef CONFIG_LTO_CLANG_THIN_DIST
+# Save the _c_flags, sliently.
+quiet_cmd_save_c_flags =
+      saved_c_flags = $(_c_flags) $(modkern_cflags)
+      cmd_save_c_flags = printf '\n%s\n' 'saved_c_flags_$@ := $(call escsq,$(saved_c_flags))' >> $(dot-target).cmd
+endif
+
 quiet_cmd_cc_o_c = CC $(quiet_modtag)  $@
       cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< \
 		$(cmd_ld_single) \
@@ -256,6 +263,7 @@ quiet_cmd_cc_o_c = CC $(quiet_modtag)  $@
 
 define rule_cc_o_c
 	$(call cmd_and_fixdep,cc_o_c)
+	$(call cmd,save_c_flags)
 	$(call cmd,checksrc)
 	$(call cmd,checkdoc)
 	$(call cmd,gen_objtooldep)
scripts/Makefile.thinlto new file +41 -0

41 lines not on this page · raw message

scripts/Makefile.vmlinux_a +37 -0
index 650d44330d1f..a46d5b8eccb6 100644
@@ -21,6 +21,41 @@ targets += built-in-fixup.a
 built-in-fixup.a: $(KBUILD_VMLINUX_OBJS) scripts/head-object-list.txt FORCE
 	$(call if_changed,ar_builtin_fixup)
 
+ifdef CONFIG_LTO_CLANG_THIN_DIST
+
+quiet_cmd_builtin.order = GEN     $@
+      cmd_builtin.order = $(AR) t $< > $@
+
+targets += builtin.order
+builtin.order: built-in-fixup.a FORCE
+	$(call if_changed,builtin.order)
+
+quiet_cmd_ld_thinlto_index = LD      $@
+      cmd_ld_thinlto_index = \
+	$(LD) $(KBUILD_LDFLAGS) -r --thinlto-index-only=$@ @$<
+
+targets += vmlinux.thinlto-index
+vmlinux.thinlto-index: builtin.order FORCE
+	$(call if_changed,ld_thinlto_index)
+
+quiet_cmd_ar_vmlinux.a = GEN     $@
+      cmd_ar_vmlinux.a =					\
+	rm -f $@;						\
+	while read -r obj; do					\
+		if grep -qx $${obj} $(word 2, $^); then		\
+			echo $${obj%.o}.thinlto-native.o;	\
+		else						\
+			echo $${obj};				\
+		fi;						\
+	done < $< | xargs $(AR) cDPrS --thin $@
+
+targets += vmlinux.a
+vmlinux.a: builtin.order vmlinux.thinlto-index FORCE
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.thinlto
+	$(call if_changed,ar_vmlinux.a)
+
+else
+
 # vmlinux.a
 # ---------------------------------------------------------------------------
 
@@ -28,6 +63,8 @@ targets += vmlinux.a
 vmlinux.a: built-in-fixup.a FORCE
 	$(call if_changed,copy)
 
+endif
+
 # Add FORCE to the prerequisites of a target to force it to be always rebuilt.
 # ---------------------------------------------------------------------------
 
scripts/mod/modpost.c +12 -3
index abbcd3fc1394..171886ac1726 100644
@@ -1487,13 +1487,22 @@ static void extract_crcs_for_object(const char *object, struct module *mod)
 	char cmd_file[PATH_MAX];
 	char *buf, *p;
 	const char *base;
-	int dirlen, ret;
+	int dirlen, baselen_without_suffix, ret;
 
 	base = get_basename(object);
 	dirlen = base - object;
 
-	ret = snprintf(cmd_file, sizeof(cmd_file), "%.*s.%s.cmd",
-		       dirlen, object, base);
+	baselen_without_suffix = strlen(object) - dirlen - strlen(".o");
+
+	/*
+	 * When CONFIG_LTO_CLANG_THIN_DIST=y, the ELF is *.thinlto-native.o
+	 * but the symbol CRCs are recorded in *.o.cmd file.
+	 */
+	if (strends(object, ".thinlto-native.o"))
+		baselen_without_suffix -= strlen(".thinlto-native");
+
+	ret = snprintf(cmd_file, sizeof(cmd_file), "%.*s.%.*s.o.cmd",
+		       dirlen, object, baselen_without_suffix, base);
 	if (ret >= sizeof(cmd_file)) {
 		error("%s: too long path was truncated\n", cmd_file);
 		return;
Signature · 1 line
2.54.0.823.g6e5bcc1fc9-goog
#4 lore raw
Quoted 11 lines · On Thu, 28 May 2026 13:39:05 -0700, [email protected] <[email protected]> wrote:
scripts/Makefile.thinlto new file +5 -0
new file mode 100644
index 000000000000..408b63786a08
@@ -0,0 +1,41 @@
+PHONY := __default
+__default:
+
+include include/config/auto.conf
+include $(srctree)/scripts/Kbuild.include

scripts/Makefile.thinlto line 15

Quoted 10 lines
scripts/Makefile.thinlto new file +10 -0
+include $(srctree)/scripts/Makefile.lib
+
+native-objs := $(patsubst %.o,%.thinlto-native.o,$(call read-file, vmlinux.thinlto-index))
+
+__default: $(native-objs)
+
+# Generate .thinlto-native.o (obj) from .o (bitcode) and .thinlto.bc (summary) files
+# ---------------------------------------------------------------------------
+quiet_cmd_cc_o_bc = CC $(quiet_modtag)  $@
+      be_flags = $(saved_c_flags_$(<))

This change...

scripts/Makefile.thinlto line 41

Quoted 7 lines

[ ... skip 20 lines ... ]

scripts/Makefile.thinlto new file +6 -0
+prereq-ir-objs := $(targets:%.thinlto-native.o=%.o)
+existing-ir-objs := $(wildcard $(sort $(prereq-ir-objs)))
+
+-include $(foreach f, $(existing-targets) $(existing-ir-objs), $(dir $(f)).$(notdir $(f)).cmd)
+
+.PHONY: $(PHONY)

... and this change appear to break the build in certain circumstances.

  | $ printf 'CONFIG_%s\n' LTO_NONE=n LTO_CLANG_THIN_DIST=y >kernel/configs/repro.config
  |
  | $ make -skj"$(nproc)" ARCH=arm64 LLVM=1 mrproper defconfig repro.config vmlinux
  | ...
  | warning: linking module 'virt/kvm/coalesced_mmio.o': Linking two modules of different target triples: 'mm/slab_common.o' is 'aarch64-unknown-linux-gnu' whereas 'virt/kvm/coalesced_mmio.o' is 'x86_64-unknown-linux-gnu' [-Wlinker-warnings]
  | '+v8a' is not a recognized feature for this target (ignoring feature)
  | '-fmv' is not a recognized feature for this target (ignoring feature)
  | '-fp-armv8' is not a recognized feature for this target (ignoring feature)
  | '-neon' is not a recognized feature for this target (ignoring feature)
  | '+v8a' is not a recognized feature for this target (ignoring feature)
  | '-fmv' is not a recognized feature for this target (ignoring feature)
  | '-fp-armv8' is not a recognized feature for this target (ignoring feature)
  | '-neon' is not a recognized feature for this target (ignoring feature)
  | <inline asm>:1:2: error: invalid instruction mnemonic 'dmb'
  |         dmb ishst
  |         ^~~
  | 2 warnings and 3 errors generated.
  | make[5]: *** [scripts/Makefile.thinlto:22: virt/kvm/dirty_ring.thinlto-native.o] Error 1
  | ...

Looking at V=1 output, the backend flags are missing from this object and the other ones that errored. If I revert back to how you had it in v10, the build is successful and the flags appear to be included properly.

Sashiko has another comment as well.

https://sashiko.dev/#/patchset/26003?part=3

Signature · 2 lines
Cheers,
Nathan
author
#5 lore raw
Quoted 56 lines · Nathan Chancellor
Quoted 11 lines · On Thu, 28 May 2026 13:39:05 -0700, [email protected] <[email protected]> wrote:
scripts/Makefile.thinlto new file +5 -0
new file mode 100644
index 000000000000..408b63786a08
@@ -0,0 +1,41 @@
+PHONY := __default
+__default:
+
+include include/config/auto.conf
+include $(srctree)/scripts/Kbuild.include

scripts/Makefile.thinlto line 15

Quoted 10 lines
scripts/Makefile.thinlto new file +10 -0
+include $(srctree)/scripts/Makefile.lib
+
+native-objs := $(patsubst %.o,%.thinlto-native.o,$(call read-file, vmlinux.thinlto-index))
+
+__default: $(native-objs)
+
+# Generate .thinlto-native.o (obj) from .o (bitcode) and .thinlto.bc (summary) files
+# ---------------------------------------------------------------------------
+quiet_cmd_cc_o_bc = CC $(quiet_modtag)  $@
+      be_flags = $(saved_c_flags_$(<))

This change...

scripts/Makefile.thinlto line 41

Quoted 7 lines

[ ... skip 20 lines ... ]

scripts/Makefile.thinlto new file +6 -0
+prereq-ir-objs := $(targets:%.thinlto-native.o=%.o)
+existing-ir-objs := $(wildcard $(sort $(prereq-ir-objs)))
+
+-include $(foreach f, $(existing-targets) $(existing-ir-objs), $(dir $(f)).$(notdir $(f)).cmd)
+
+.PHONY: $(PHONY)

... and this change appear to break the build in certain circumstances.

  | $ printf 'CONFIG_%s\n' LTO_NONE=n LTO_CLANG_THIN_DIST=y >kernel/configs/repro.config
  |
  | $ make -skj"$(nproc)" ARCH=arm64 LLVM=1 mrproper defconfig repro.config vmlinux
  | ...
  | warning: linking module 'virt/kvm/coalesced_mmio.o': Linking two modules of different target triples: 'mm/slab_common.o' is 'aarch64-unknown-linux-gnu' whereas 'virt/kvm/coalesced_mmio.o' is 'x86_64-unknown-linux-gnu' [-Wlinker-warnings]
  | '+v8a' is not a recognized feature for this target (ignoring feature)
  | '-fmv' is not a recognized feature for this target (ignoring feature)
  | '-fp-armv8' is not a recognized feature for this target (ignoring feature)
  | '-neon' is not a recognized feature for this target (ignoring feature)
  | '+v8a' is not a recognized feature for this target (ignoring feature)
  | '-fmv' is not a recognized feature for this target (ignoring feature)
  | '-fp-armv8' is not a recognized feature for this target (ignoring feature)
  | '-neon' is not a recognized feature for this target (ignoring feature)
  | <inline asm>:1:2: error: invalid instruction mnemonic 'dmb'
  |         dmb ishst
  |         ^~~
  | 2 warnings and 3 errors generated.
  | make[5]: *** [scripts/Makefile.thinlto:22: virt/kvm/dirty_ring.thinlto-native.o] Error 1
  | ...
Quoted 4 lines

Looking at V=1 output, the backend flags are missing from this object and the other ones that errored. If I revert back to how you had it in v10, the build is successful and the flags appear to be included properly.

I think this error from the relative path issue: I have the _c_flags as:
"saved_c_flags_arch/arm64/kvm/../../../virt/kvm/coalesced_mmio.o" But in the backend compilation, I tried to load "saved_c_flags_virt/kvm/coalesced_mmio.o".

I think I will revert to my v10 implementation here.

Quoted 4 lines

Sashiko has another comment as well.

https://sashiko.dev/#/patchset/26003?part=3

Are you referring to KBUILD_VMLINUX_OBJS and KBUILD_VMLINUX_LIBS part? I'm not sure if that's true: in my build, KBUILD_VMLINUX_OBJS includes lib/lib.a etc.
In line 1296 of Makefile:
KBUILD_VMLINUX_OBJS := built-in.a $(patsubst %/, %/lib.a, $(filter %/, $(libs-y)))

We can see native objects in lib/*.
% find lib -name '*.thinlto-native.o' |wc

    204     204    7104
Quoted 5 lines

--
Cheers,
Nathan

#6 lore raw
Quoted 6 lines · Rong Xu
Quoted 3 lines · Nathan Chancellor

Sashiko has another comment as well.

https://sashiko.dev/#/patchset/26003?part=3

Are you referring to KBUILD_VMLINUX_OBJS and KBUILD_VMLINUX_LIBS part?

Yes.

Quoted 9 lines

I'm not sure if that's true: in my build, KBUILD_VMLINUX_OBJS includes lib/lib.a etc.
In line 1296 of Makefile:
KBUILD_VMLINUX_OBJS := built-in.a $(patsubst %/, %/lib.a, $(filter %/, $(libs-y)))

We can see native objects in lib/*.
% find lib -name '*.thinlto-native.o' |wc

    204     204    7104

Ah yes, I should have double checked that before brining it up. KBUILD_VMLINUX_LIBS would contain archives such as drivers/firmware/efi/libstub/lib.a, which we obviously do not want to process into vmlinux.a, so I think that comment is obviously invalid.

Signature · 2 lines
Cheers,
Nathan