Bluetooth: btusb: Add TP-Link UB600 for Realtek 8761BUV
PATCH v2 1/1 Bluetooth: btusb: Add TP-Link UB600 for Realtek 8761BUV
Add the vendor/product ID (0x37ad, 0x0600) to usb_device_id table for Realtek 8761BUV.
The device info from /sys/kernel/debug/usb/devices as below.
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=37ad ProdID=0600 Rev= 2.00 S: Manufacturer= S: Product=TP-Link Bluetooth USB Adapter S: SerialNumber=ACA7F14FD2A5 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
--- drivers/bluetooth/btusb.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/bluetooth/btusb.c +2 -0
@@ -840,6 +840,8 @@ static const struct usb_device_id quirks_table[] = { BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x2b89, 0x6275), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x37ad, 0x0600), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, /* Additional Realtek 8821AE Bluetooth devices */ { USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK },
Signature · 1 line
2.54.0
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=1085542
---Test result---
Test Summary:
CheckPatch PASS 0.73 seconds GitLint PASS 0.33 seconds SubjectPrefix PASS 0.13 seconds BuildKernel PASS 24.73 seconds CheckAllWarning PASS 27.58 seconds CheckSparse PASS 26.25 seconds BuildKernel32 PASS 24.07 seconds TestRunnerSetup PASS 526.83 seconds IncrementalBuild PASS 24.34 seconds
https://github.com/bluez/bluetooth-next/pull/127
---
Regards,
Linux Bluetooth
From: [email protected]
I saw that the merge request https://github.com/bluez/bluetooth-next/pull/127 is closed. Any news on this patch? Is there something I should do?
Regards,
Nils Helmig
I saw that the merge request https://github.com/bluez/bluetooth-next/pull/127 is closed. Any news on this patch? Is there anything I should do?
Regards,
Nils Helmig
Dear Nils,
Am 29.05.26 um 15:38 schrieb Nils Helmig:
Quoted 3 lines
I saw that the merge request https://github.com/bluez/bluetooth-next/
pull/127 is closed. Any news on this patch? Is there anything I should do?
I think you need to resend, as the state in patchwork in *New, archived* [1].
Kind regards,
Paul
[1]: https://patchwork.kernel.org/project/bluetooth/patch/[email protected]/