Skip to contentSkip to conversation

slimbus: fixes for 7.1

PATCH New [email protected] 1 participant 9 messages May 30

Subsystems (3)
lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

cover slimbus: fixes for 7.1

From: Srinivas Kandagatla <[email protected]>

Hi Greg,
Here are some fixes in ngd-ctrl driver which can go for 7.1 release Could you please queue these as 7.1 material.

Thanks for all the help,
Srini

Bartosz Golaszewski (1):
slimbus: qcom-ngd-ctrl: fix OF node refcount

Bjorn Andersson (7):
slimbus: qcom-ngd-ctrl: Fix up platform_driver registration
slimbus: qcom-ngd-ctrl: Fix probe error path ordering
slimbus: qcom-ngd-ctrl: Correct PDR and SSR cleanup ownership
slimbus: qcom-ngd-ctrl: Register callbacks after creating the ngd
slimbus: qcom-ngd-ctrl: Initialize controller resources in controller
slimbus: qcom-ngd-ctrl: Balance pm_runtime enablement for NGD
slimbus: qcom-ngd-ctrl: Avoid ABBA on tx_lock/ctrl->lock

 drivers/slimbus/qcom-ngd-ctrl.c | 122 ++++++++++++++++++++------------
 1 file changed, 77 insertions(+), 45 deletions(-)
Signature · 1 line
2.53.0
author maintainer
#1 lore raw

PATCH 1/8 slimbus: qcom-ngd-ctrl: fix OF node refcount

From: Bartosz Golaszewski <[email protected]>

Platform devices created with platform_device_alloc() call platform_device_release() when the last reference to the device's kobject is dropped. This function calls of_node_put() unconditionally. This works fine for devices created with platform_device_register_full() but users of the split approach (platform_device_alloc() + platform_device_add()) must bump the reference of the of_node they assign manually. Add the missing call to of_node_get().

Fixes 917809e2280b ("slimbus: ngd: Add qcom SLIMBus NGD driver")
---
 drivers/slimbus/qcom-ngd-ctrl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/slimbus/qcom-ngd-ctrl.c +1 -1
index 1ed6be6e85d2..428266949fdd 100644
@@ -1542,7 +1542,7 @@ static int of_qcom_slim_ngd_register(struct device *parent,
 			kfree(ngd);
 			return ret;
 		}
-		ngd->pdev->dev.of_node = node;
+		ngd->pdev->dev.of_node = of_node_get(node);
 		ctrl->ngd = ngd;
 
 		ret = platform_device_add(ngd->pdev);
Signature · 1 line
2.53.0
author maintainer
#2 lore raw

PATCH 2/8 slimbus: qcom-ngd-ctrl: Fix up platform_driver registration

In reply to [email protected]

From: Bjorn Andersson <[email protected]>

Device drivers should not invoke platform_driver_register()/unregister() in their probe and remove paths. They should further not rely on platform_driver_unregister() as their only means of "deleting" their child devices.

Introduce a helper to unregister the child device and move the platform_driver_register()/unregister() to module_init()/exit().

Fixes 917809e2280b ("slimbus: ngd: Add qcom SLIMBus NGD driver")
---
 drivers/slimbus/qcom-ngd-ctrl.c | 36 ++++++++++++++++++++++++++++++---
 1 file changed, 33 insertions(+), 3 deletions(-)
drivers/slimbus/qcom-ngd-ctrl.c +33 -3
index 428266949fdd..47ba9fb34d25 100644
@@ -1560,6 +1560,13 @@ static int of_qcom_slim_ngd_register(struct device *parent,
 	return -ENODEV;
 }
 
+static void qcom_slim_ngd_unregister(struct qcom_slim_ngd_ctrl *ctrl)
+{
+	struct qcom_slim_ngd *ngd = ctrl->ngd;
+
+	platform_device_del(ngd->pdev);
+}
+
 static int qcom_slim_ngd_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -1662,7 +1669,6 @@ static int qcom_slim_ngd_ctrl_probe(struct platform_device *pdev)
 		goto err_pdr_lookup;
 	}
 
-	platform_driver_register(&qcom_slim_ngd_driver);
 	return of_qcom_slim_ngd_register(dev, ctrl);
 
 err_pdr_alloc:
@@ -1676,7 +1682,9 @@ static int qcom_slim_ngd_ctrl_probe(struct platform_device *pdev)
 
 static void qcom_slim_ngd_ctrl_remove(struct platform_device *pdev)
 {
-	platform_driver_unregister(&qcom_slim_ngd_driver);
+	struct qcom_slim_ngd_ctrl *ctrl = platform_get_drvdata(pdev);
+
+	qcom_slim_ngd_unregister(ctrl);
 }
 
 static void qcom_slim_ngd_remove(struct platform_device *pdev)
@@ -1752,6 +1760,28 @@ static struct platform_driver qcom_slim_ngd_driver = {
 	},
 };
 
-module_platform_driver(qcom_slim_ngd_ctrl_driver);
+static int qcom_slim_ngd_init(void)
+{
+	int ret;
+
+	ret = platform_driver_register(&qcom_slim_ngd_driver);
+	if (ret)
+		return ret;
+
+	ret = platform_driver_register(&qcom_slim_ngd_ctrl_driver);
+	if (ret)
+		platform_driver_unregister(&qcom_slim_ngd_driver);
+
+	return ret;
+}
+
+static void qcom_slim_ngd_exit(void)
+{
+	platform_driver_unregister(&qcom_slim_ngd_ctrl_driver);
+	platform_driver_unregister(&qcom_slim_ngd_driver);
+}
+
+module_init(qcom_slim_ngd_init);
+module_exit(qcom_slim_ngd_exit);
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("Qualcomm SLIMBus NGD controller");
Signature · 1 line
2.53.0
author maintainer
#3 lore raw

PATCH 3/8 slimbus: qcom-ngd-ctrl: Fix probe error path ordering

In reply to [email protected]

From: Bjorn Andersson <[email protected]>

qcom_slim_ngd_ctrl_probe() first registers the SSR callback then allocates the PDR context, as such the error path needs to come in opposite order to allow us to unroll each step.

Fixes 16f14551d0df ("slimbus: qcom-ngd: cleanup in probe error path")
---
 drivers/slimbus/qcom-ngd-ctrl.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)
drivers/slimbus/qcom-ngd-ctrl.c +5 -6
index 47ba9fb34d25..6b91a6f11cb6 100644
@@ -1660,22 +1660,21 @@ static int qcom_slim_ngd_ctrl_probe(struct platform_device *pdev)
 	if (IS_ERR(ctrl->pdr)) {
 		ret = dev_err_probe(dev, PTR_ERR(ctrl->pdr),
 				    "Failed to init PDR handle\n");
-		goto err_pdr_alloc;
+		goto err_unregister_ssr;
 	}
 
 	pds = pdr_add_lookup(ctrl->pdr, "avs/audio", "msm/adsp/audio_pd");
 	if (IS_ERR(pds) && PTR_ERR(pds) != -EALREADY) {
 		ret = dev_err_probe(dev, PTR_ERR(pds), "pdr add lookup failed\n");
-		goto err_pdr_lookup;
+		goto err_pdr_release;
 	}
 
 	return of_qcom_slim_ngd_register(dev, ctrl);
 
-err_pdr_alloc:
-	qcom_unregister_ssr_notifier(ctrl->notifier, &ctrl->nb);
-
-err_pdr_lookup:
+err_pdr_release:
 	pdr_handle_release(ctrl->pdr);
+err_unregister_ssr:
+	qcom_unregister_ssr_notifier(ctrl->notifier, &ctrl->nb);
 
 	return ret;
 }
Signature · 1 line
2.53.0
author maintainer
#4 lore raw

PATCH 4/8 slimbus: qcom-ngd-ctrl: Correct PDR and SSR cleanup ownership

In reply to [email protected]

From: Bjorn Andersson <[email protected]>

PDR and SSR callbacks are registred from the controller probe function, but currently released from the child device's remove function.

The remove() function should only be unwinding what was done in the same device's probe() function.

Fixes 917809e2280b ("slimbus: ngd: Add qcom SLIMBus NGD driver")
---
 drivers/slimbus/qcom-ngd-ctrl.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/slimbus/qcom-ngd-ctrl.c +3 -2
index 6b91a6f11cb6..e9238927cd2a 100644
@@ -1683,6 +1683,9 @@ static void qcom_slim_ngd_ctrl_remove(struct platform_device *pdev)
 {
 	struct qcom_slim_ngd_ctrl *ctrl = platform_get_drvdata(pdev);
 
+	pdr_handle_release(ctrl->pdr);
+	qcom_unregister_ssr_notifier(ctrl->notifier, &ctrl->nb);
+
 	qcom_slim_ngd_unregister(ctrl);
 }
 
@@ -1691,8 +1694,6 @@ static void qcom_slim_ngd_remove(struct platform_device *pdev)
 	struct qcom_slim_ngd_ctrl *ctrl = platform_get_drvdata(pdev);
 
 	pm_runtime_disable(&pdev->dev);
-	pdr_handle_release(ctrl->pdr);
-	qcom_unregister_ssr_notifier(ctrl->notifier, &ctrl->nb);
 	qcom_slim_ngd_enable(ctrl, false);
 	qcom_slim_ngd_exit_dma(ctrl);
 	qcom_slim_ngd_qmi_svc_event_deinit(&ctrl->qmi);
Signature · 1 line
2.53.0
author maintainer
#5 lore raw

PATCH 5/8 slimbus: qcom-ngd-ctrl: Register callbacks after creating the ngd

In reply to [email protected]

From: Bjorn Andersson <[email protected]>

When the remoteproc starts in parallel with the NGD driver being probed, or the remoteproc is already up when the PDR lookup is being registered, or in the theoretical event that we get an interrupt from the hardware, these callbacks will operate on uninitialized data. This result in issues to boot the affected boards.

One such example can be seen in the following fault, where qcom_slim_ngd_ssr_pdr_notify() schedules work on the NULL ngd_up_work.

[   21.858578] ------------[ cut here ]------------
[   21.858745] WARNING: kernel/workqueue.c:2338 at __queue_work+0x5e0/0x790, CPU#2: kworker/2:2/116
...
[   21.859251] Call trace:
[   21.859255]  __queue_work+0x5e0/0x790 (P)
[   21.859265]  queue_work_on+0x6c/0xf0
[   21.859273]  qcom_slim_ngd_ssr_pdr_notify+0x110/0x150 [slim_qcom_ngd_ctrl]
[   21.859304]  qcom_slim_ngd_ssr_notify+0x24/0x40 [slim_qcom_ngd_ctrl]
[   21.859318]  notifier_call_chain+0xa4/0x230
[   21.859329]  srcu_notifier_call_chain+0x64/0xb8
[   21.859338]  ssr_notify_start+0x40/0x78 [qcom_common]
[   21.859355]  rproc_start+0x130/0x230
[   21.859367]  rproc_boot+0x3d4/0x518

...

Move the enablement of interrupts, and the registration of SSR and PDR until after the NGD device has been registered.

This could be further refined by moving initialization to the control driver probe and by removing the platform driver model from the picture.

Fixes 917809e2280b ("slimbus: ngd: Add qcom SLIMBus NGD driver")
---
 drivers/slimbus/qcom-ngd-ctrl.c | 45 +++++++++++++++++++--------------
 1 file changed, 26 insertions(+), 19 deletions(-)
drivers/slimbus/qcom-ngd-ctrl.c +26 -19
index e9238927cd2a..c1f26b7de519 100644
@@ -1609,6 +1609,7 @@ static int qcom_slim_ngd_ctrl_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct qcom_slim_ngd_ctrl *ctrl;
+	int irq;
 	int ret;
 	struct pdr_service *pds;
 
@@ -1622,20 +1623,16 @@ static int qcom_slim_ngd_ctrl_probe(struct platform_device *pdev)
 	if (IS_ERR(ctrl->base))
 		return PTR_ERR(ctrl->base);
 
-	ret = platform_get_irq(pdev, 0);
-	if (ret < 0)
-		return ret;
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
 
-	ret = devm_request_irq(dev, ret, qcom_slim_ngd_interrupt,
-			       IRQF_TRIGGER_HIGH, "slim-ngd", ctrl);
+	ret = devm_request_irq(dev, irq, qcom_slim_ngd_interrupt,
+			       IRQF_TRIGGER_HIGH | IRQF_NO_AUTOEN,
+			       "slim-ngd", ctrl);
 	if (ret)
 		return dev_err_probe(&pdev->dev, ret, "request IRQ failed\n");
 
-	ctrl->nb.notifier_call = qcom_slim_ngd_ssr_notify;
-	ctrl->notifier = qcom_register_ssr_notifier("lpass", &ctrl->nb);
-	if (IS_ERR(ctrl->notifier))
-		return PTR_ERR(ctrl->notifier);
-
 	ctrl->dev = dev;
 	ctrl->framer.rootfreq = SLIM_ROOT_FREQ >> 3;
 	ctrl->framer.superfreq =
@@ -1657,24 +1654,34 @@ static int qcom_slim_ngd_ctrl_probe(struct platform_device *pdev)
 	init_completion(&ctrl->qmi_up);
 
 	ctrl->pdr = pdr_handle_alloc(slim_pd_status, ctrl);
-	if (IS_ERR(ctrl->pdr)) {
-		ret = dev_err_probe(dev, PTR_ERR(ctrl->pdr),
-				    "Failed to init PDR handle\n");
-		goto err_unregister_ssr;
-	}
+	if (IS_ERR(ctrl->pdr))
+		return dev_err_probe(dev, PTR_ERR(ctrl->pdr), "Failed to init PDR handle\n");
+
+	ret = of_qcom_slim_ngd_register(dev, ctrl);
+	if (ret)
+		goto err_pdr_release;
 
 	pds = pdr_add_lookup(ctrl->pdr, "avs/audio", "msm/adsp/audio_pd");
 	if (IS_ERR(pds) && PTR_ERR(pds) != -EALREADY) {
 		ret = dev_err_probe(dev, PTR_ERR(pds), "pdr add lookup failed\n");
-		goto err_pdr_release;
+		goto err_unregister_ngd;
+	}
+
+	ctrl->nb.notifier_call = qcom_slim_ngd_ssr_notify;
+	ctrl->notifier = qcom_register_ssr_notifier("lpass", &ctrl->nb);
+	if (IS_ERR(ctrl->notifier)) {
+		ret = PTR_ERR(ctrl->notifier);
+		goto err_unregister_ngd;
 	}
 
-	return of_qcom_slim_ngd_register(dev, ctrl);
+	enable_irq(irq);
 
+	return 0;
+
+err_unregister_ngd:
+	qcom_slim_ngd_unregister(ctrl);
 err_pdr_release:
 	pdr_handle_release(ctrl->pdr);
-err_unregister_ssr:
-	qcom_unregister_ssr_notifier(ctrl->notifier, &ctrl->nb);
 
 	return ret;
 }
Signature · 1 line
2.53.0
author maintainer
#6 lore raw

PATCH 6/8 slimbus: qcom-ngd-ctrl: Initialize controller resources in controller

In reply to [email protected]

From: Bjorn Andersson <[email protected]>

The work structs and work queue are controller resources, create and destroy them in the controller context. Creating them as part of the child device's probe path seems to be okay now that the controller's probe has been updated, but if for some reason the child does not probe successfully a SSR or PDR notification will schedule_work() on an uninitialized "ngd_up_work".

Move the initialization of these controller resources to the controller probe function to avoid any issues, and to clarify the ownership.

Fixes 917809e2280b ("slimbus: ngd: Add qcom SLIMBus NGD driver")
---
 drivers/slimbus/qcom-ngd-ctrl.c | 38 ++++++++++++++-------------------
 1 file changed, 16 insertions(+), 22 deletions(-)
drivers/slimbus/qcom-ngd-ctrl.c +16 -22
index c1f26b7de519..540a62999655 100644
@@ -1582,25 +1582,8 @@ static int qcom_slim_ngd_probe(struct platform_device *pdev)
 	pm_runtime_enable(dev);
 	pm_runtime_get_noresume(dev);
 	ret = qcom_slim_ngd_qmi_svc_event_init(ctrl);
-	if (ret) {
+	if (ret)
 		dev_err(&pdev->dev, "QMI service registration failed:%d", ret);
-		return ret;
-	}
-
-	INIT_WORK(&ctrl->m_work, qcom_slim_ngd_master_worker);
-	INIT_WORK(&ctrl->ngd_up_work, qcom_slim_ngd_up_worker);
-	ctrl->mwq = create_singlethread_workqueue("ngd_master");
-	if (!ctrl->mwq) {
-		dev_err(&pdev->dev, "Failed to start master worker\n");
-		ret = -ENOMEM;
-		goto wq_err;
-	}
-
-	return 0;
-wq_err:
-	qcom_slim_ngd_qmi_svc_event_deinit(&ctrl->qmi);
-	if (ctrl->mwq)
-		destroy_workqueue(ctrl->mwq);
 
 	return ret;
 }
@@ -1653,9 +1636,18 @@ static int qcom_slim_ngd_ctrl_probe(struct platform_device *pdev)
 	init_completion(&ctrl->qmi.qmi_comp);
 	init_completion(&ctrl->qmi_up);
 
+	INIT_WORK(&ctrl->m_work, qcom_slim_ngd_master_worker);
+	INIT_WORK(&ctrl->ngd_up_work, qcom_slim_ngd_up_worker);
+
+	ctrl->mwq = create_singlethread_workqueue("ngd_master");
+	if (!ctrl->mwq)
+		return dev_err_probe(dev, -ENOMEM, "Failed to start master worker\n");
+
 	ctrl->pdr = pdr_handle_alloc(slim_pd_status, ctrl);
-	if (IS_ERR(ctrl->pdr))
-		return dev_err_probe(dev, PTR_ERR(ctrl->pdr), "Failed to init PDR handle\n");
+	if (IS_ERR(ctrl->pdr)) {
+		ret = dev_err_probe(dev, PTR_ERR(ctrl->pdr), "Failed to init PDR handle\n");
+		goto err_destroy_mwq;
+	}
 
 	ret = of_qcom_slim_ngd_register(dev, ctrl);
 	if (ret)
@@ -1682,6 +1674,8 @@ static int qcom_slim_ngd_ctrl_probe(struct platform_device *pdev)
 	qcom_slim_ngd_unregister(ctrl);
 err_pdr_release:
 	pdr_handle_release(ctrl->pdr);
+err_destroy_mwq:
+	destroy_workqueue(ctrl->mwq);
 
 	return ret;
 }
@@ -1694,6 +1688,8 @@ static void qcom_slim_ngd_ctrl_remove(struct platform_device *pdev)
 	qcom_unregister_ssr_notifier(ctrl->notifier, &ctrl->nb);
 
 	qcom_slim_ngd_unregister(ctrl);
+
+	destroy_workqueue(ctrl->mwq);
 }
 
 static void qcom_slim_ngd_remove(struct platform_device *pdev)
@@ -1704,8 +1700,6 @@ static void qcom_slim_ngd_remove(struct platform_device *pdev)
 	qcom_slim_ngd_enable(ctrl, false);
 	qcom_slim_ngd_exit_dma(ctrl);
 	qcom_slim_ngd_qmi_svc_event_deinit(&ctrl->qmi);
-	if (ctrl->mwq)
-		destroy_workqueue(ctrl->mwq);
 
 	kfree(ctrl->ngd);
 	ctrl->ngd = NULL;
Signature · 1 line
2.53.0
author maintainer
#7 lore raw

PATCH 7/8 slimbus: qcom-ngd-ctrl: Balance pm_runtime enablement for NGD

In reply to [email protected]

From: Bjorn Andersson <[email protected]>

The pm_runtime_enable() and pm_runtime_use_autosuspend() calls are supposed to be balanced on exit, add these calls.

Fixes 917809e2280b ("slimbus: ngd: Add qcom SLIMBus NGD driver")
---
 drivers/slimbus/qcom-ngd-ctrl.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/slimbus/qcom-ngd-ctrl.c +5 -1
index 540a62999655..8b207efeadbc 100644
@@ -1582,8 +1582,11 @@ static int qcom_slim_ngd_probe(struct platform_device *pdev)
 	pm_runtime_enable(dev);
 	pm_runtime_get_noresume(dev);
 	ret = qcom_slim_ngd_qmi_svc_event_init(ctrl);
-	if (ret)
+	if (ret) {
 		dev_err(&pdev->dev, "QMI service registration failed:%d", ret);
+		pm_runtime_dont_use_autosuspend(dev);
+		pm_runtime_disable(dev);
+	}
 
 	return ret;
 }
@@ -1696,6 +1699,7 @@ static void qcom_slim_ngd_remove(struct platform_device *pdev)
 {
 	struct qcom_slim_ngd_ctrl *ctrl = platform_get_drvdata(pdev);
 
+	pm_runtime_dont_use_autosuspend(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 	qcom_slim_ngd_enable(ctrl, false);
 	qcom_slim_ngd_exit_dma(ctrl);
Signature · 1 line
2.53.0
author maintainer
#8 lore raw

PATCH 8/8 slimbus: qcom-ngd-ctrl: Avoid ABBA on tx_lock/ctrl->lock

In reply to [email protected]

From: Bjorn Andersson <[email protected]>

During the SSR/PDR down notification the tx_lock is taken with the intent to provide synchronization with active DMA transfers.

But during this period qcom_slim_ngd_down() is invoked, which ends up in slim_report_absent(), which takes the slim_controller lock. In multiple other codepaths these two locks are taken in the opposite order (i.e. slim_controller then tx_lock).

The result is a lockdep splat, and a possible deadlock:

rprocctl/449 is trying to acquire lock:
ffff00009793e620 (&ctrl->lock){+.+.}-{4:4}, at: slim_report_absent (drivers/slimbus/core.c:322) slimbus

but task is already holding lock:
ffff00009793fb50 (&ctrl->tx_lock){+.+.}-{4:4}, at: qcom_slim_ngd_ssr_pdr_notify (drivers/slimbus/qcom-ngd-ctrl.c:1475) slim_qcom_ngd_ctrl

which lock already depends on the new lock.

  Possible unsafe locking scenario:
        CPU0                    CPU1
        ----                    ----
   lock(&ctrl->tx_lock);
                                lock(&ctrl->lock);
                                lock(&ctrl->tx_lock);

lock(&ctrl->lock);

The assumption is that the comment refers to the desire to not call qcom_slim_ngd_exit_dma() while we have an ongoing DMA TX transaction. But any such transaction is initiated and completed within a single qcom_slim_ngd_xfer_msg().

Prior to calling qcom_slim_ngd_exit_dma() the slim_controller is torn down, all child devices are notified that the slimbus is gone and the child devices are removed.

Stop taking the tx_lock in qcom_slim_ngd_ssr_pdr_notify() to avoid the deadlock.

Fixes a899d324863a ("slimbus: qcom-ngd-ctrl: add Sub System Restart support")
---
 drivers/slimbus/qcom-ngd-ctrl.c | 3 ---
 1 file changed, 3 deletions(-)
drivers/slimbus/qcom-ngd-ctrl.c +0 -3
index 8b207efeadbc..3071e46d03be 100644
@@ -1471,15 +1471,12 @@ static int qcom_slim_ngd_ssr_pdr_notify(struct qcom_slim_ngd_ctrl *ctrl,
 	switch (action) {
 	case QCOM_SSR_BEFORE_SHUTDOWN:
 	case SERVREG_SERVICE_STATE_DOWN:
-		/* Make sure the last dma xfer is finished */
-		mutex_lock(&ctrl->tx_lock);
 		if (ctrl->state != QCOM_SLIM_NGD_CTRL_DOWN) {
 			pm_runtime_get_noresume(ctrl->ctrl.dev);
 			ctrl->state = QCOM_SLIM_NGD_CTRL_DOWN;
 			qcom_slim_ngd_down(ctrl);
 			qcom_slim_ngd_exit_dma(ctrl);
 		}
-		mutex_unlock(&ctrl->tx_lock);
 		break;
 	case QCOM_SSR_AFTER_POWERUP:
 	case SERVREG_SERVICE_STATE_UP:
Signature · 1 line
2.53.0