platform/x86: hp-wmi: Add dual-channel PWM fan control for Victus S
PATCH 1/1 platform/x86: hp-wmi: Add dual-channel PWM fan control for Victus S
Currently, manual fan control on supported Victus S models uses a single PWM value for both CPU and GPU fans, linking their speeds via a hardcoded gpu_delta offset. This prevents userspace tools from managing the thermal profiles of the CPU and GPU independently.
Refactor the hwmon implementation to support independent dual-channel PWM control:
- Split the single 'pwm' state into 'cpu_pwm' and 'gpu_pwm'.
- Expose a second PWM channel ('pwm2') to userspace via hwmon_channel_info.
- Remove the gpu_delta mechanism entirely.
The 'pwm1_enable' mode remains shared, as the underlying hardware does not support per-fan modes. When switching to manual mode, both fans are smoothly initialized to their current RPMs. Additionally, ensure that the HP_FAN_SPEED_AUTOMATIC flag is isolated from rpm_to_pwm mathematical interpolations during mode resets to prevent unintended fan states.
Tested on: HP Victus 16-s0xxx
--- drivers/platform/x86/hp/hp-wmi.c | 50 +++++++++++++++----------------- 1 file changed, 24 insertions(+), 26 deletions(-)
drivers/platform/x86/hp/hp-wmi.c +24 -26
@@ -488,9 +488,9 @@ struct hp_wmi_hwmon_priv {struct mutex lock;/* protects mode, pwm */ u8 min_rpm;u8 max_rpm; -int gpu_delta;u8 mode; -u8 pwm; +u8 cpu_pwm; +u8 gpu_pwm;struct delayed_work keep_alive_dwork; };
@@ -817,24 +817,15 @@ static int hp_wmi_fan_speed_max_set(int enabled)return enabled; } -static int hp_wmi_fan_speed_set (struct hp_wmi_hwmon_priv *priv,u8 speed) +static int hp_wmi_fan_speed_set (struct hp_wmi_hwmon_priv *priv) {u8 fan_speed[2 ]; -int gpu_speed, ret; - - fan_speed[CPU_FAN ] = speed; - fan_speed[GPU_FAN ] = speed; +int ret; -/* -* GPU fan speed is always a little higher than CPU fan speed, we fetch -* this delta value from the fan table during hwmon init. -* Exception: Speed is set to HP_FAN_SPEED_AUTOMATIC, to revert to -* automatic mode. -*/ -if (speed !=HP_FAN_SPEED_AUTOMATIC ) { - gpu_speed = speed + priv->gpu_delta; - fan_speed[GPU_FAN ] =clamp_val (gpu_speed,0 ,U8_MAX ); - } + fan_speed[CPU_FAN ] = (priv->cpu_pwm ==HP_FAN_SPEED_AUTOMATIC ) ? +HP_FAN_SPEED_AUTOMATIC :pwm_to_rpm (priv->cpu_pwm, priv); + fan_speed[GPU_FAN ] = (priv->gpu_pwm ==HP_FAN_SPEED_AUTOMATIC ) ? +HP_FAN_SPEED_AUTOMATIC :pwm_to_rpm (priv->gpu_pwm, priv); ret =hp_wmi_get_fan_count_userdefine_trigger ();if (ret <0 )
@@ -851,7 +842,9 @@ static int hp_wmi_fan_speed_set(struct hp_wmi_hwmon_priv *priv, u8 speed)static int hp_wmi_fan_speed_reset (struct hp_wmi_hwmon_priv *priv) { -return hp_wmi_fan_speed_set (priv,HP_FAN_SPEED_AUTOMATIC ); + priv->cpu_pwm =HP_FAN_SPEED_AUTOMATIC ; + priv->gpu_pwm =HP_FAN_SPEED_AUTOMATIC ; +return hp_wmi_fan_speed_set (priv); }static int hp_wmi_fan_speed_max_reset (struct hp_wmi_hwmon_priv *priv)
@@ -2402,7 +2395,7 @@ static int hp_wmi_apply_fan_settings(struct hp_wmi_hwmon_priv *priv)case PWM_MODE_MANUAL :if (!is_victus_s_thermal_profile ())return -EOPNOTSUPP ; - ret =hp_wmi_fan_speed_set (priv,pwm_to_rpm (priv->pwm, priv)); + ret =hp_wmi_fan_speed_set (priv);if (ret <0 )return ret; mod_delayed_work(system_wq, &priv->keep_alive_dwork,
@@ -2518,7 +2511,10 @@ static int hp_wmi_hwmon_write(struct device *dev, enum hwmon_sensor_types type,/* ensure PWM input is within valid fan speeds */ rpm =pwm_to_rpm (val, priv); rpm =clamp_val (rpm, priv->min_rpm, priv->max_rpm); - priv->pwm =rpm_to_pwm (rpm, priv); +if (channel ==0 ) + priv->cpu_pwm =rpm_to_pwm (rpm, priv); +else + priv->gpu_pwm =rpm_to_pwm (rpm, priv);return hp_wmi_apply_fan_settings (priv); }switch (val) {
@@ -2532,10 +2528,14 @@ static int hp_wmi_hwmon_write(struct device *dev, enum hwmon_sensor_types type,* When switching to manual mode, set fan speed to * current RPM values to ensure a smooth transition. */ - rpm =hp_wmi_get_fan_speed_victus_s (channel); + rpm =hp_wmi_get_fan_speed_victus_s (CPU_FAN ); +if (rpm <0 ) +return rpm; + priv->cpu_pwm =rpm_to_pwm (rpm /100 , priv); + rpm =hp_wmi_get_fan_speed_victus_s (GPU_FAN );if (rpm <0 )return rpm; - priv->pwm =rpm_to_pwm (rpm /100 , priv); + priv->gpu_pwm =rpm_to_pwm (rpm /100 , priv); priv->mode =PWM_MODE_MANUAL ;return hp_wmi_apply_fan_settings (priv);case PWM_MODE_AUTO :
@@ -2551,7 +2551,7 @@ static int hp_wmi_hwmon_write(struct device *dev, enum hwmon_sensor_types type,static const struct hwmon_channel_info *const info[] = {HWMON_CHANNEL_INFO (fan,HWMON_F_INPUT ,HWMON_F_INPUT ), -HWMON_CHANNEL_INFO (pwm,HWMON_PWM_ENABLE |HWMON_PWM_INPUT ), +HWMON_CHANNEL_INFO (pwm,HWMON_PWM_ENABLE |HWMON_PWM_INPUT ,HWMON_PWM_INPUT ),NULL };
@@ -2592,7 +2592,7 @@ static int hp_wmi_setup_fan_settings(struct hp_wmi_hwmon_priv *priv)struct victus_s_fan_table *fan_table;u8 min_rpm, max_rpm;u8 cpu_rpm, gpu_rpm, noise_db; -int gpu_delta, i, num_entries, ret; +int i, num_entries, ret;size_t header_size, entry_size;/* Default behaviour on hwmon init is automatic mode */
@@ -2638,10 +2638,8 @@ static int hp_wmi_setup_fan_settings(struct hp_wmi_hwmon_priv *priv)if (min_rpm ==U8_MAX || max_rpm ==0 )return -EINVAL ; - gpu_delta = fan_table->entries[0 ].gpu_rpm - fan_table->entries[0 ].cpu_rpm; priv->min_rpm = min_rpm; priv->max_rpm = max_rpm; - priv->gpu_delta = gpu_delta;return 0 ; }
Signature · 1 line
2.54.0