staging: media: av7110: remove unused dead code wrapped in #if 0

index 49ce295771e4..b0bd7666d48b 100644
@@ -95,29 +95,6 @@ u32 av7110_debiread(struct av7110 *av7110, u32 config, int addr, unsigned int co
 	return result;
 }
 
-/* av7110 ARM core boot stuff */
-#if 0
-void av7110_reset_arm(struct av7110 *av7110)
-{
-	saa7146_setgpio(av7110->dev, RESET_LINE, SAA7146_GPIO_OUTLO);
-
-	/* Disable DEBI and GPIO irq */
-	SAA7146_IER_DISABLE(av7110->dev, MASK_19 | MASK_03);
-	SAA7146_ISR_CLEAR(av7110->dev, MASK_19 | MASK_03);
-
-	saa7146_setgpio(av7110->dev, RESET_LINE, SAA7146_GPIO_OUTHI);
-	msleep(30);	/* the firmware needs some time to initialize */
-
-	ARM_ResetMailBox(av7110);
-
-	SAA7146_ISR_CLEAR(av7110->dev, MASK_19 | MASK_03);
-	SAA7146_IER_ENABLE(av7110->dev, MASK_03);
-
-	av7110->arm_ready = 1;
-	dprintk(1, "reset ARM\n");
-}
-#endif  /*  0  */
-
 static int waitdebi(struct av7110 *av7110, int adr, int state)
 {
 	int k;

@@ -498,29 +475,6 @@ int av7110_fw_cmd(struct av7110 *av7110, int type, int com, int num, ...)
 	return ret;
 }
 
-#if 0
-int av7110_send_ci_cmd(struct av7110 *av7110, u8 subcom, u8 *buf, u8 len)
-{
-	int i, ret;
-	u16 cmd[18] = { ((COMTYPE_COMMON_IF << 8) + subcom),
-		16, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
-
-	dprintk(4, "%p\n", av7110);
-
-	for (i = 0; i < len && i < 32; i++) {
-		if (i % 2 == 0)
-			cmd[(i / 2) + 2] = (u16)(buf[i]) << 8;
-		else
-			cmd[(i / 2) + 2] |= buf[i];
-	}
-
-	ret = av7110_send_fw_cmd(av7110, cmd, 18);
-	if (ret && ret != -ERESTARTSYS)
-		pr_err("%s(): error %d\n", __func__, ret);
-	return ret;
-}
-#endif  /*  0  */
-
 int av7110_fw_request(struct av7110 *av7110, u16 *request_buf,
 		      int request_buf_len, u16 *reply_buf, int reply_buf_len)
 {