Skip to contentSkip to conversation

platform/x86: hp-wmi: Add support for Omen 16-ap0xxx (8E35)

PATCH In review Krishna Chomal 2 participants 2 messages Jun 8 – Jun 9

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 platform/x86: hp-wmi: Add support for Omen 16-ap0xxx (8E35)

The HP Omen 16-ap0xxx (board ID: 8E35) has the same WMI interface as other Victus S boards, but requires quirks for correctly switching thermal profile.

Add the DMI board name to victus_s_thermal_profile_boards[] table and map it to omen_v1_legacy_thermal_params.

Testing on board 8E35 confirmed that platform profile is registered successfully and fan RPMs are readable and controllable.

---
 drivers/platform/x86/hp/hp-wmi.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/platform/x86/hp/hp-wmi.c +4 -0
index f27d82258aa3..e94df6ca39b4 100644
@@ -265,6 +265,10 @@ static const struct dmi_system_id victus_s_thermal_profile_boards[] __initconst
 		.matches = { DMI_MATCH(DMI_BOARD_NAME, "8D87") },
 		.driver_data = (void *)&omen_v1_no_ec_thermal_params,
 	},
+	{
+		.matches = { DMI_MATCH(DMI_BOARD_NAME, "8E35") },
+		.driver_data = (void *)&omen_v1_legacy_thermal_params,
+	},
 	{},
 };
 
Signature · 1 line
2.54.0
maintainer
#1 lore raw
Quoted 8 lines · Krishna Chomal

The HP Omen 16-ap0xxx (board ID: 8E35) has the same WMI interface as other Victus S boards, but requires quirks for correctly switching thermal profile.

Add the DMI board name to victus_s_thermal_profile_boards[] table and map it to omen_v1_legacy_thermal_params.

[...]

Thank you for your contribution, it has been applied to my local review-ilpo-next branch. Note it will show up in the public platform-drivers-x86/review-ilpo-next branch only once I've pushed my local branch there, which might take a while.

The list of commits applied:
[1/1] platform/x86: hp-wmi: Add support for Omen 16-ap0xxx (8E35)

      commit: 56b7981c6f21670c0a1a62e6d2f9afb380e2596d

--
i.