Kconfig restyle
Subsystems (21)
cover Kconfig restyle
The Kconfig menu attribute '---help---' is deprecated. If we change to "help" the text has to indent. This again has to align with other attributes, so we have to restyle them as well.
And as there's a script then change all Kconfig to start with the 'arch' and 'board' directories.
Restyle all Kconfigs:
Menu entries : no space left
Menu attributes: 1 TAB
Help text : 1 TAB + 2 spaces
Replace '---help---' by 'help'
Problems:
People creating indents in help texts.
The script doesn't care. It puts everything left aligned.
Help texts with empty lines. It stops aligning as help test.
Other fixes:
While using checkpatch.pl or the script some issues showed up, so fix them as well.
Johan Jonker (8):
Kconfig: armv7: fix typo
Kconfig: powerpc: mpc85xx: fix typo
Kconfig: power: pmic: fix typo
Kconfig: themal: fix typo
Kconfig: misc: add empty line
Kconfig: arm: restyle
Kconfig: arch: restyle
Kconfig: board: restyle
arch/Kconfig | 16 +- arch/arm/Kconfig | 54 +-- arch/arm/cpu/armv7/Kconfig | 26 +- arch/arm/cpu/armv7/ls102xa/Kconfig | 8 +- arch/arm/cpu/armv8/Kconfig | 18 +- arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 6 +- arch/arm/mach-at91/Kconfig | 12 +- arch/arm/mach-imx/Kconfig | 2 +- arch/arm/mach-imx/imx9/Kconfig | 6 +- arch/arm/mach-imx/mx6/Kconfig | 16 +- arch/arm/mach-keystone/Kconfig | 4 +- arch/arm/mach-kirkwood/Kconfig | 10 +- arch/arm/mach-mediatek/Kconfig | 28 +- arch/arm/mach-omap2/omap5/Kconfig | 10 +- arch/arm/mach-owl/Kconfig | 12 +- arch/arm/mach-rockchip/Kconfig | 16 +- arch/arm/mach-rockchip/px30/Kconfig | 4 +- arch/arm/mach-rockchip/rk322x/Kconfig | 4 +- arch/arm/mach-rockchip/rk3288/Kconfig | 6 +- arch/arm/mach-rockchip/rk3308/Kconfig | 2 +- arch/arm/mach-rockchip/rk3368/Kconfig | 18 +- arch/arm/mach-rockchip/rk3399/Kconfig | 4 +- arch/arm/mach-rockchip/rv1126/Kconfig | 2 +- arch/arm/mach-socfpga/Kconfig | 4 +- arch/arm/mach-sti/Kconfig | 2 +- arch/arm/mach-stm32mp/Kconfig | 54 +-- arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig | 22 +- arch/arm/mach-sunxi/Kconfig | 450 ++++++++++---------- arch/arm/mach-uniphier/Kconfig | 2 +- arch/m68k/Kconfig | 34 +- arch/mips/Kconfig | 8 +- arch/mips/mach-octeon/Kconfig | 8 +- arch/powerpc/cpu/mpc85xx/Kconfig | 44 +- arch/x86/Kconfig | 20 +- board/alliedtelesis/SBx81LIFKW/Kconfig | 2 +- board/alliedtelesis/SBx81LIFXCAT/Kconfig | 2 +- board/beagle/beagleboneai64/Kconfig | 4 +- board/beagle/beagleplay/Kconfig | 12 +- board/beagle/beagley-ai/Kconfig | 2 +- board/cortina/common/Kconfig | 10 +- board/cortina/presidio-asic/Kconfig | 2 +- board/firefly/roc-pc-rk3399/Kconfig | 2 +- board/imgtec/boston/Kconfig | 2 +- board/logicpd/imx6/Kconfig | 2 +- board/nxp/ls1012ardb/Kconfig | 2 +- board/nxp/mx6memcal/Kconfig | 60 +-- board/out4/o4-imx6ull-nano/Kconfig | 20 +- board/phytec/common/Kconfig | 18 +- board/phytec/common/k3/Kconfig | 4 +- board/phytec/phycore_am62ax/Kconfig | 4 +- board/phytec/phycore_am62x/Kconfig | 40 +- board/phytec/phycore_am64x/Kconfig | 34 +- board/phytec/phycore_am68x/Kconfig | 4 +- board/samsung/axy17lte/Kconfig | 12 +- board/siemens/draco/Kconfig | 4 +- board/socionext/developerbox/Kconfig | 8 +- board/sysam/amcore/Kconfig | 6 +- board/ti/am62ax/Kconfig | 2 +- board/ti/am62px/Kconfig | 2 +- board/ti/am62x/Kconfig | 4 +- board/ti/am64x/Kconfig | 4 +- board/ti/am65x/Kconfig | 4 +- board/ti/common/Kconfig | 4 +- board/ti/j7200/Kconfig | 4 +- board/ti/j721e/Kconfig | 4 +- board/ti/j721s2/Kconfig | 4 +- board/ti/j722s/Kconfig | 2 +- board/ti/j784s4/Kconfig | 8 +- board/toradex/apalis_imx6/Kconfig | 12 +- board/toradex/aquila-am69/Kconfig | 4 +- board/toradex/colibri_imx6/Kconfig | 2 +- board/toradex/verdin-am62p/Kconfig | 28 +- board/traverse/common/Kconfig | 4 +- board/xilinx/Kconfig | 2 +- drivers/misc/Kconfig | 1 + drivers/power/pmic/Kconfig | 2 +- drivers/thermal/Kconfig | 2 +- 77 files changed, 644 insertions(+), 643 deletions(-)
--
2.39.5
PATCH 1/8 Kconfig: armv7: fix typo
While restyling Kconfig the script checkpatch.pl gives this info:
WARNING: 'suppport' may be misspelled - perhaps 'support'?
Fix by changing 'suppport' to 'support'.
--- arch/arm/cpu/armv7/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/cpu/armv7/Kconfig +1 -1
@@ -23,7 +23,7 @@ config ARMV7_BOOT_SEC_DEFAULT ---help--- Say Y here to boot in secure mode by default even if non-secure mode is supported. This option is useful to boot kernels which do not - suppport booting in non-secure mode. Only set this if you need it. + support booting in non-secure mode. Only set this if you need it. This can be overridden at run-time by setting the bootm_boot_mode env. variable to "sec" or "nonsec".
--
2.39.5
Re: [PATCH v1 1/8] Kconfig: armv7: fix typo
Quoted 8 lines · Johan Jonker
While restyling
Kconfigthe script checkpatch.pl gives this info:WARNING: 'suppport' may be misspelled - perhaps 'support'?
Fix by changing 'suppport' to 'support'.
Signed-off-by Johan Jonker <[email protected]>
Signature · 1 line
Tom
PATCH 2/8 Kconfig: powerpc: mpc85xx: fix typo
In reply to Johan JonkerWhile restyling Kconfig the script checkpatch.pl gives this info:
WARNING: 'Enble' may be misspelled - perhaps 'Enable'?
Fix by changing 'Enble' to 'Enable'.
--- arch/powerpc/cpu/mpc85xx/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/powerpc/cpu/mpc85xx/Kconfig +1 -1
@@ -973,7 +973,7 @@ config E500MC select BTB imply CMD_PCI help - Enble PowerPC E500MC core + Enable PowerPC E500MC core config E5500 bool
--
2.39.5
Re: [PATCH v1 2/8] Kconfig: powerpc: mpc85xx: fix typo
Quoted 8 lines · Johan Jonker
While restyling
Kconfigthe script checkpatch.pl gives this info:WARNING: 'Enble' may be misspelled - perhaps 'Enable'?
Fix by changing 'Enble' to 'Enable'.
Signed-off-by Johan Jonker <[email protected]>
Signature · 1 line
Tom
PATCH 3/8 Kconfig: power: pmic: fix typo
In reply to Johan JonkerWhile restyling Kconfig the script checkpatch.pl gives this info:
WARNING: 'refered' may be misspelled - perhaps 'referred'?
Fix by changing 'refered' to 'referred'.
--- drivers/power/pmic/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/power/pmic/Kconfig +1 -1
@@ -376,7 +376,7 @@ config DM_PMIC_TPS80031 This config enables implementation of driver-model pmic uclass features for TPS80031/TPS80032 PMICs. The driver implements read/write operations. This is a Power Management IC with a decent set of peripherals from which - 5 Buck Converters refered as Switched-mode power supply (SMPS), 11 General- + 5 Buck Converters referred as Switched-mode power supply (SMPS), 11 General- Purpose Low-Dropout Voltage Regulators (LDO), USB OTG Module, Real-Time Clock (RTC) with Timer and Alarm Wake-Up, Two Digital PWM Outputs and more with I2C Compatible Interface. PMIC occupies 4 I2C addresses.
--
2.39.5
Re: [PATCH v1 3/8] Kconfig: power: pmic: fix typo
Quoted 8 lines · Johan Jonker
While restyling
Kconfigthe script checkpatch.pl gives this info:WARNING: 'refered' may be misspelled - perhaps 'referred'?
Fix by changing 'refered' to 'referred'.
Signed-off-by Johan Jonker <[email protected]>
Signature · 1 line
Tom
PATCH 4/8 Kconfig: themal: fix typo
In reply to Johan JonkerWhile restyling Kconfig the script checkpatch.pl gives this info:
WARNING: Possible repeated word: 'for'
Fix by changing 'for for' to 'for'.
--- drivers/thermal/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/thermal/Kconfig +1 -1
@@ -46,7 +46,7 @@ config RCAR_GEN3_THERMAL config TI_DRA7_THERMAL bool "Temperature sensor driver for TI dra7xx SOCs" help - Enable thermal support for for the Texas Instruments DRA752 SoC family. + Enable thermal support for the Texas Instruments DRA752 SoC family. The driver supports reading CPU temperature. config TI_LM74_THERMAL
--
2.39.5
Re: [PATCH v1 4/8] Kconfig: themal: fix typo
Quoted 8 lines · Johan Jonker
While restyling
Kconfigthe script checkpatch.pl gives this info:WARNING: Possible repeated word: 'for'
Fix by changing 'for for' to 'for'.
Signed-off-by Johan Jonker <[email protected]>
Signature · 1 line
Tom
PATCH 5/8 Kconfig: misc: add empty line
In reply to Johan JonkerRestyle by adding an empty line between configs.
--- drivers/misc/Kconfig | 1 + 1 file changed, 1 insertion(+)
drivers/misc/Kconfig +1 -0
@@ -647,6 +647,7 @@ config IHS_FPGA gdsys devices, which supply the majority of the functionality offered by the devices. This driver supports both CON and CPU variants of the devices, depending on the device tree entry. + config ESM_K3 bool "Enable K3 ESM driver" depends on ARCH_K3
--
2.39.5
Re: [PATCH v1 5/8] Kconfig: misc: add empty line
Quoted 3 lines · Johan Jonker
Restyle by adding an empty line between configs.
Signed-off-by Johan Jonker <[email protected]>
Signature · 1 line
Tom
PATCH 6/8 Kconfig: arm: restyle
In reply to Johan JonkerRestyle all Kconfigs for "arm":
Menu entries : no space left
Menu attributes: 1 TAB
Help text : 1 TAB + 2 spaces
Replace '---help---' by 'help'
--- arch/arm/Kconfig | 54 +-- arch/arm/cpu/armv7/Kconfig | 26 +- arch/arm/cpu/armv7/ls102xa/Kconfig | 8 +- arch/arm/cpu/armv8/Kconfig | 18 +- arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 6 +- arch/arm/mach-at91/Kconfig | 12 +- arch/arm/mach-imx/Kconfig | 2 +- arch/arm/mach-imx/imx9/Kconfig | 6 +- arch/arm/mach-imx/mx6/Kconfig | 16 +- arch/arm/mach-keystone/Kconfig | 4 +- arch/arm/mach-kirkwood/Kconfig | 10 +- arch/arm/mach-mediatek/Kconfig | 28 +- arch/arm/mach-omap2/omap5/Kconfig | 10 +- arch/arm/mach-owl/Kconfig | 12 +- arch/arm/mach-rockchip/Kconfig | 16 +- arch/arm/mach-rockchip/px30/Kconfig | 4 +- arch/arm/mach-rockchip/rk322x/Kconfig | 4 +- arch/arm/mach-rockchip/rk3288/Kconfig | 6 +- arch/arm/mach-rockchip/rk3308/Kconfig | 2 +- arch/arm/mach-rockchip/rk3368/Kconfig | 18 +- arch/arm/mach-rockchip/rk3399/Kconfig | 4 +- arch/arm/mach-rockchip/rv1126/Kconfig | 2 +- arch/arm/mach-socfpga/Kconfig | 4 +- arch/arm/mach-sti/Kconfig | 2 +- arch/arm/mach-stm32mp/Kconfig | 54 +-- arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig | 22 +- arch/arm/mach-sunxi/Kconfig | 450 ++++++++++---------- arch/arm/mach-uniphier/Kconfig | 2 +- 28 files changed, 401 insertions(+), 401 deletions(-)
arch/arm/Kconfig +27 -27
@@ -477,30 +477,30 @@ config SYS_THUMB_BUILD bool "Build U-Boot using the Thumb instruction set" depends on !ARM64 help - Use this flag to build U-Boot using the Thumb instruction set for - ARM architectures. Thumb instruction set provides better code - density. For ARM architectures that support Thumb2 this flag will - result in Thumb2 code generated by GCC. + Use this flag to build U-Boot using the Thumb instruction set for + ARM architectures. Thumb instruction set provides better code + density. For ARM architectures that support Thumb2 this flag will + result in Thumb2 code generated by GCC. config SPL_SYS_THUMB_BUILD bool "Build SPL using the Thumb instruction set" default y if SYS_THUMB_BUILD depends on !ARM64 && SPL help - Use this flag to build SPL using the Thumb instruction set for - ARM architectures. Thumb instruction set provides better code - density. For ARM architectures that support Thumb2 this flag will - result in Thumb2 code generated by GCC. + Use this flag to build SPL using the Thumb instruction set for + ARM architectures. Thumb instruction set provides better code + density. For ARM architectures that support Thumb2 this flag will + result in Thumb2 code generated by GCC. config TPL_SYS_THUMB_BUILD bool "Build TPL using the Thumb instruction set" default y if SYS_THUMB_BUILD depends on TPL && !ARM64 help - Use this flag to build TPL using the Thumb instruction set for - ARM architectures. Thumb instruction set provides better code - density. For ARM architectures that support Thumb2 this flag will - result in Thumb2 code generated by GCC. + Use this flag to build TPL using the Thumb instruction set for + ARM architectures. Thumb instruction set provides better code + density. For ARM architectures that support Thumb2 this flag will + result in Thumb2 code generated by GCC. config SYS_L2_PL310 bool "ARM PL310 L2 cache controller"
@@ -1583,7 +1583,7 @@ config TARGET_HIKEY select PL01X_SERIAL select SPECIFY_CONSOLE_INDEX imply CMD_DM - help + help Support for HiKey 96boards platform. It features a HI6220 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM.
@@ -1596,7 +1596,7 @@ config TARGET_HIKEY960 select OF_CONTROL select PL01X_SERIAL imply CMD_DM - help + help Support for HiKey960 96boards platform. It features a HI3660 SoC, with 4xA73 CPU, 4xA53 CPU, MALI-G71 GPU, and 3GB RAM.
@@ -1609,7 +1609,7 @@ config TARGET_POPLAR select OF_CONTROL select PL01X_SERIAL imply CMD_DM - help + help Support for Poplar 96boards EE platform. It features a HI3798cv200 SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU making it capable of running any commercial set-top solution based on
@@ -1667,10 +1667,10 @@ config TARGET_LS1012AFRWY imply SCSI imply SCSI_AHCI help - Support for Freescale LS1012AFRWY platform. - The LS1012A FRWY board (FRWY) is a high-performance - development platform that supports the QorIQ LS1012A - Layerscape Architecture processor. + Support for Freescale LS1012AFRWY platform. + The LS1012A FRWY board (FRWY) is a high-performance + development platform that supports the QorIQ LS1012A + Layerscape Architecture processor. config TARGET_LS1012AFRDM bool "Support ls1012afrdm"
@@ -1778,9 +1778,9 @@ config TARGET_PG_WCOM_SELI8 select VENDOR_KM imply SCSI help - Support for Hitachi-Powergrids SELI8 service unit card. - SELI8 is a QorIQ LS1021a based service unit card used - in XMC20 and FOX615 product families. + Support for Hitachi-Powergrids SELI8 service unit card. + SELI8 is a QorIQ LS1021a based service unit card used + in XMC20 and FOX615 product families. config TARGET_PG_WCOM_EXPU1 bool "Support Hitachi-Powergrids EXPU1 service unit card"
@@ -1796,9 +1796,9 @@ config TARGET_PG_WCOM_EXPU1 select VENDOR_KM imply SCSI help - Support for Hitachi-Powergrids EXPU1 service unit card. - EXPU1 is a QorIQ LS1021a based service unit card used - in XMC20 and FOX615 product families. + Support for Hitachi-Powergrids EXPU1 service unit card. + EXPU1 is a QorIQ LS1021a based service unit card used + in XMC20 and FOX615 product families. config TARGET_LS1021ATSN bool "Support ls1021atsn"
@@ -2173,8 +2173,8 @@ config TARGET_POMELO select DM_SERIAL imply CMD_PCI help - Support for pomelo platform. - It has 8GB Sdram, uart and pcie. + Support for pomelo platform. + It has 8GB Sdram, uart and pcie. config TARGET_PE2201 bool "Support Phytium PE2201 Platform"
arch/arm/cpu/armv7/Kconfig +13 -13
@@ -13,19 +13,19 @@ config ARMV7_NONSEC bool "Enable support for booting in non-secure mode" if EXPERT depends on CPU_V7_HAS_NONSEC default y - ---help--- - Say Y here to enable support for booting in non-secure / SVC mode. + help + Say Y here to enable support for booting in non-secure / SVC mode. config ARMV7_BOOT_SEC_DEFAULT bool "Boot in secure mode by default" if EXPERT depends on ARMV7_NONSEC default y if ARCH_TEGRA - ---help--- - Say Y here to boot in secure mode by default even if non-secure mode - is supported. This option is useful to boot kernels which do not - support booting in non-secure mode. Only set this if you need it. - This can be overridden at run-time by setting the bootm_boot_mode env. - variable to "sec" or "nonsec". + help + Say Y here to boot in secure mode by default even if non-secure mode + is supported. This option is useful to boot kernels which do not + support booting in non-secure mode. Only set this if you need it. + This can be overridden at run-time by setting the bootm_boot_mode env. + variable to "sec" or "nonsec". config HAS_ARMV7_SECURE_BASE bool "Enable support for a hardware secure memory area"
@@ -74,8 +74,8 @@ config ARMV7_VIRT bool "Enable support for hardware virtualization" if EXPERT depends on CPU_V7_HAS_VIRT && ARMV7_NONSEC default y - ---help--- - Say Y here to boot in hypervisor (HYP) mode when booting non-secure. + help + Say Y here to boot in hypervisor (HYP) mode when booting non-secure. config ARMV7_PSCI bool "Enable PSCI support" if EXPERT
@@ -115,9 +115,9 @@ config ARMV7_LPAE bool "Use LPAE page table format" if EXPERT depends on CPU_V7A default y if ARMV7_VIRT - ---help--- - Say Y here to use the long descriptor page table format. This is - required if U-Boot runs in HYP mode. + help + Say Y here to use the long descriptor page table format. This is + required if U-Boot runs in HYP mode. config ARMV7_SET_CORTEX_SMPEN bool
arch/arm/cpu/armv7/ls102xa/Kconfig +4 -4
@@ -100,9 +100,9 @@ config SYS_FSL_ERRATUM_A008407 config SYS_FSL_QSPI_SKIP_CLKSEL bool "Skip setting QSPI clock during SoC init" help - To improve startup times when booting from QSPI flash, the QSPI - frequency can be set very early in the boot process. If this option - is enabled, the QSPI frequency will not be changed by U-Boot during - SoC initialization. + To improve startup times when booting from QSPI flash, the QSPI + frequency can be set very early in the boot process. If this option + is enabled, the QSPI frequency will not be changed by U-Boot during + SoC initialization. endmenu
arch/arm/cpu/armv8/Kconfig +9 -9
@@ -23,11 +23,11 @@ config ARMV8_SPL_EXCEPTION_VECTORS and want to save some space at the cost of less debugging info. config ARMV8_MULTIENTRY - bool "Enable multiple CPUs to enter into U-Boot" + bool "Enable multiple CPUs to enter into U-Boot" config ARMV8_SET_SMPEN - bool "Enable data coherency with other cores in cluster" - help + bool "Enable data coherency with other cores in cluster" + help Say Y here if there is not any trust firmware to set CPUECTLR_EL1.SMPEN bit before U-Boot.
@@ -79,12 +79,12 @@ config ARMV8_SEC_FIRMWARE_SUPPORT process brief. Note: Only FIT format image is supported. You should prepare and provide the below information: - - Address of secure firmware. - - Address to hold the return address from secure firmware. - - Secure firmware FIT image related information. - Such as: SEC_FIRMWARE_FIT_IMAGE and SEC_FIRMWARE_FIT_CNF_NAME - - The target exception level that secure monitor firmware will - return to. + - Address of secure firmware. + - Address to hold the return address from secure firmware. + - Secure firmware FIT image related information. + Such as: SEC_FIRMWARE_FIT_IMAGE and SEC_FIRMWARE_FIT_CNF_NAME + - The target exception level that secure monitor firmware will + return to. config SPL_ARMV8_SEC_FIRMWARE_SUPPORT bool "Enable ARMv8 secure monitor firmware framework support for SPL"
arch/arm/cpu/armv8/fsl-layerscape/Kconfig +3 -3
@@ -440,8 +440,8 @@ config MAX_CPUS config EMC2305 bool "Fan controller" help - Enable the EMC2305 fan controller for configuration of fan - speed. + Enable the EMC2305 fan controller for configuration of fan + speed. config QSPI_AHB_INIT bool "Init the QSPI AHB bus"
@@ -548,7 +548,7 @@ config SYS_FSL_PCLK_DIV help This is the divider that is used to derive Platform clock from Platform PLL, in another word: - Platform_clk = Platform_PLL_freq / this_divider + Platform_clk = Platform_PLL_freq / this_divider config SYS_FSL_DSPI_CLK_DIV int "DSPI clock divider"
arch/arm/mach-at91/Kconfig +6 -6
@@ -150,9 +150,9 @@ config TARGET_SAM9X60EK select BOARD_LATE_INIT config TARGET_SAM9X60_CURIOSITY - bool "SAM9X60 CURIOSITY board" - select SAM9X60 - select BOARD_LATE_INIT + bool "SAM9X60 CURIOSITY board" + select SAM9X60 + select BOARD_LATE_INIT config TARGET_SAM9X75_CURIOSITY bool "SAM9X75 CURIOSITY board"
@@ -270,9 +270,9 @@ config TARGET_CORVUS imply CMD_DM config TARGET_SAMA7G5EK - bool "SAMA7G5 EK board" - select SAMA7G5 - select BOARD_LATE_INIT + bool "SAMA7G5 EK board" + select SAMA7G5 + select BOARD_LATE_INIT config TARGET_SAMA7G54_CURIOSITY bool "SAMA7G54 CURIOSITY board"
arch/arm/mach-imx/Kconfig +1 -1
@@ -129,7 +129,7 @@ config CMD_PRIBLOB depends on HAS_CAAM && IMX_HAB help This option enables the priblob command which can be used - to set the priblob setting to 0x3. + to set the priblob setting to 0x3. config CMD_HDMIDETECT bool "Support the 'hdmidet' command"
arch/arm/mach-imx/imx9/Kconfig +3 -3
@@ -1,9 +1,9 @@ if ARCH_IMX9 config AHAB_BOOT - bool "Support i.MX9 AHAB features" - help - This option enables the support for AHAB secure boot. + bool "Support i.MX9 AHAB features" + help + This option enables the support for AHAB secure boot. config IMX9 bool
arch/arm/mach-imx/mx6/Kconfig +8 -8
@@ -95,10 +95,10 @@ config MX6_OCRAM_256KB bool "Support 256KB OCRAM" depends on MX6D || MX6Q help - Allows using the full 256KB size of the OCRAM on the MX6Q/MX6D series - of chips, such as for SPL. The OCRAM of the Lite series of chips is - only 128KB, so using this option will prevent the resulting code from - working on those chips. + Allows using the full 256KB size of the OCRAM on the MX6Q/MX6D series + of chips, such as for SPL. The OCRAM of the Lite series of chips is + only 128KB, so using this option will prevent the resulting code from + working on those chips. config MX6_DDRCAL bool "Include dynamic DDR calibration routines"
@@ -678,10 +678,10 @@ config TARGET_BRPPT2 select SUPPORT_SPL select SPL_DM if SPL select SPL_OF_CONTROL if SPL - help - Support - B&R BRPPT2 platform - based on Freescale's iMX6 SoC + help + Support + B&R BRPPT2 platform + based on Freescale's iMX6 SoC config TARGET_O4_IMX6ULL_NANO bool "O4-iMX6ULL-NANO"
arch/arm/mach-keystone/Kconfig +2 -2
@@ -18,9 +18,9 @@ config TARGET_K2L_EVM config TARGET_K2G_EVM bool "TI Keystone 2 Galileo EVM" - select BOARD_LATE_INIT + select BOARD_LATE_INIT select SOC_K2G - select TI_I2C_BOARD_DETECT + select TI_I2C_BOARD_DETECT endchoice
arch/arm/mach-kirkwood/Kconfig +5 -5
@@ -22,13 +22,13 @@ config KIRKWOOD_COMMON select SYS_NS16550 config HAS_CUSTOM_SYS_INIT_SP_ADDR - bool "Use a custom location for the initial stack pointer address" - default y + bool "Use a custom location for the initial stack pointer address" + default y config CUSTOM_SYS_INIT_SP_ADDR - hex "Static location for the initial stack pointer" - depends on HAS_CUSTOM_SYS_INIT_SP_ADDR - default 0x5ff000 + hex "Static location for the initial stack pointer" + depends on HAS_CUSTOM_SYS_INIT_SP_ADDR + default 0x5ff000 choice prompt "Marvell Kirkwood board select"
arch/arm/mach-mediatek/Kconfig +14 -14
@@ -45,7 +45,7 @@ config TARGET_MT7981 help The MediaTek MT7981 is a ARM64-based SoC with a dual-core Cortex-A53. including UART, SPI, USB, NAND, SNFI, PWM, Gigabit Ethernet, I2C, - built-in Wi-Fi, and PCIe. + built-in Wi-Fi, and PCIe. config TARGET_MT7986 bool "MediaTek MT7986 SoC"
@@ -89,9 +89,9 @@ config TARGET_MT8188 select ARM64 help The MediaTek MT8188 is a ARM64-based SoC with a dual-core Cortex-A78 - cluster and a six-core Cortex-A55 cluster. It includes UART, SPI, - USB3.0 dual role, SD and MMC cards, UFS, PWM, I2C, I2S, S/PDIF, and - several LPDDR3 and LPDDR4 options. + cluster and a six-core Cortex-A55 cluster. It includes UART, SPI, + USB3.0 dual role, SD and MMC cards, UFS, PWM, I2C, I2S, S/PDIF, and + several LPDDR3 and LPDDR4 options. config TARGET_MT8189 bool "MediaTek MT8189 SoC"
@@ -120,13 +120,13 @@ config TARGET_MT8365 I2C, I2S, S/PDIF, and several LPDDR3 and LPDDR4 options. config TARGET_MT8512 - bool "MediaTek MT8512 SoC" - select ARM64 - help - The MediaTek MT8512 is a ARM64-based SoC with a dual-core Cortex-A53. - including UART, SPI, USB2.0 and OTG, SD and MMC cards, NAND, PWM, - IR RX, I2C, I2S, S/PDIF, and built-in Wi-Fi / Bluetooth digital - and several LPDDR3 and LPDDR4 options. + bool "MediaTek MT8512 SoC" + select ARM64 + help + The MediaTek MT8512 is a ARM64-based SoC with a dual-core Cortex-A53. + including UART, SPI, USB2.0 and OTG, SD and MMC cards, NAND, PWM, + IR RX, I2C, I2S, S/PDIF, and built-in Wi-Fi / Bluetooth digital + and several LPDDR3 and LPDDR4 options. config TARGET_MT8516 bool "MediaTek MT8516 SoC"
@@ -154,7 +154,7 @@ config MTK_MEM_MAP_DDR_BASE_PHY hex "DDR physical base address" default 0x40000000 help - Target-specific DDR physical base address. + Target-specific DDR physical base address. config MTK_MEM_MAP_DDR_SIZE hex "DDR .size in mem_map"
@@ -164,14 +164,14 @@ config MTK_MEM_MAP_DDR_SIZE default 0x40000000 if TARGET_MT7622 || TARGET_MT8512 default 0x20000000 help - Target-specific DDR region size in mem_map. + Target-specific DDR region size in mem_map. config MTK_MEM_MAP_MMIO_SIZE hex "MMIO .size in mem_map" default 0x40000000 if TARGET_MT7622 || TARGET_MT7981 || TARGET_MT7986 || TARGET_MT7987 || TARGET_MT7988 || TARGET_MT8512 default 0x20000000 help - Target-specific MMIO region size in mem_map. + Target-specific MMIO region size in mem_map. endif
arch/arm/mach-omap2/omap5/Kconfig +5 -5
@@ -64,7 +64,7 @@ config OMAP_PLATFORM_RESET_TIME_MAX_USEC 1: Time taken by the Osciallator to stop and restart 2: PMIC OTP time 3: Voltage ramp time, which can be derived using the PMIC slew rate - and value of voltage ramp needed. + and value of voltage ramp needed. if TARGET_DRA7XX_EVM || TARGET_AM57XX_EVM menu "Voltage Domain OPP selections"
@@ -72,7 +72,7 @@ menu "Voltage Domain OPP selections" choice prompt "MPU Voltage Domain" default DRA7_MPU_OPP_NOM - help + help Select the Operating Performance Point(OPP) for the MPU voltage domain on DRA7xx & AM57xx SoCs.
@@ -86,7 +86,7 @@ endchoice choice prompt "DSPEVE Voltage Domain" - help + help Select the Operating Performance Point(OPP) for the DSPEVE voltage domain on DRA7xx & AM57xx SoCs.
@@ -110,7 +110,7 @@ endchoice choice prompt "IVA Voltage Domain" - help + help Select the Operating Performance Point(OPP) for the IVA voltage domain on DRA7xx & AM57xx SoCs.
@@ -134,7 +134,7 @@ endchoice choice prompt "GPU Voltage Domain" - help + help Select the Operating Performance Point(OPP) for the GPU voltage domain on DRA7xx & AM57xx SoCs.
arch/arm/mach-owl/Kconfig +6 -6
@@ -1,21 +1,21 @@ if ARCH_OWL choice - prompt "Actions Semi Owl SoC Variant" + prompt "Actions Semi Owl SoC Variant" optional config MACH_S900 - bool "Actions Semi S900 SoC" - select ARM64 + bool "Actions Semi S900 SoC" + select ARM64 config MACH_S700 - bool "Actions Semi S700 SoC" - select ARM64 + bool "Actions Semi S700 SoC" + select ARM64 endchoice config TEXT_BASE - default 0x11000000 + default 0x11000000 config SYS_CONFIG_NAME default "owl-common"
arch/arm/mach-rockchip/Kconfig +8 -8
@@ -605,8 +605,8 @@ config SPL_ROCKCHIP_BACK_TO_BROM depends on SPL help Rockchip SoCs have ability to load SPL & U-Boot binary. If enabled, - SPL will return to the boot rom, which will then load the U-Boot - binary to keep going on. + SPL will return to the boot rom, which will then load the U-Boot + binary to keep going on. config TPL_ROCKCHIP_BACK_TO_BROM bool "TPL returns to bootrom"
@@ -616,8 +616,8 @@ config TPL_ROCKCHIP_BACK_TO_BROM depends on TPL help Rockchip SoCs have ability to load SPL & U-Boot binary. If enabled, - SPL will return to the boot rom, which will then load the U-Boot - binary to keep going on. + SPL will return to the boot rom, which will then load the U-Boot + binary to keep going on. config ROCKCHIP_COMMON_BOARD bool "Rockchip common board file"
@@ -659,7 +659,7 @@ config ROCKCHIP_BOOT_MODE_REG config ROCKCHIP_RK8XX_DISABLE_BOOT_ON_POWERON bool "Disable device boot on power plug-in" depends on PMIC_RK8XX - ---help--- + help Say Y here to prevent the device from booting up because of a plug-in event. When set, the device will boot briefly to determine why it was powered on, and if it was determined because of a plug-in event
@@ -687,7 +687,7 @@ config ROCKCHIP_BROM_HELPER bool config SPL_ROCKCHIP_EARLYRETURN_TO_BROM - bool "SPL requires early-return (for RK3188-style BROM) to BROM" + bool "SPL requires early-return (for RK3188-style BROM) to BROM" depends on SPL && ENABLE_ARM_SOC_BOOT0_HOOK help Some Rockchip BROM variants (e.g. on the RK3188) load the
@@ -708,7 +708,7 @@ config ROCKCHIP_DISABLE_FORCE_JTAG Rockchip SoCs can automatically switch between jtag and sdmmc based on the following rules: - all the SDMMC pins including SDMMC_DET set as SDMMC function in - GRF, + GRF, - force_jtag bit in GRF is 1, - SDMMC_DET is low (no card detected),
@@ -725,7 +725,7 @@ config ROCKCHIP_DISABLE_FORCE_JTAG If unsure, say Y. config TPL_ROCKCHIP_EARLYRETURN_TO_BROM - bool "TPL requires early-return (for RK3188-style BROM) to BROM" + bool "TPL requires early-return (for RK3188-style BROM) to BROM" depends on TPL && ENABLE_ARM_SOC_BOOT0_HOOK help Some Rockchip BROM variants (e.g. on the RK3188) load the
arch/arm/mach-rockchip/px30/Kconfig +2 -2
@@ -18,7 +18,7 @@ config TARGET_PX30_CORE * PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam. * EDIMM2.2 is a Form Factor Capacitive Evaluation Board from Engicam. * PX30.Core needs to mount on top of EDIMM2.2 for creating complete - PX30.Core EDIMM2.2 Starter Kit. + PX30.Core EDIMM2.2 Starter Kit. PX30.Core CTOUCH2: * PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
@@ -39,7 +39,7 @@ config TARGET_RINGNECK_PX30 bool "Theobroma Systems PX30-uQ7 (Ringneck)" help The PX30-uQ7 (Ringneck) SoM is a uQseven-compatible (40mmx70mm, - MXM-230 connector) system-on-module from Theobroma Systems[1], + MXM-230 connector) system-on-module from Theobroma Systems[1], featuring the Rockchip PX30. It provides the following feature set:
arch/arm/mach-rockchip/rk322x/Kconfig +2 -2
@@ -27,10 +27,10 @@ config SPL_SERIAL default y config TPL_STACK - default 0x10088000 + default 0x10088000 config TPL_TEXT_BASE - default 0x10081000 + default 0x10081000 source "board/rockchip/evb_rk3229/Kconfig"
arch/arm/mach-rockchip/rk3288/Kconfig +3 -3
@@ -91,7 +91,7 @@ config TARGET_MIQI_RK3288 config TARGET_PHYCORE_RK3288 bool "phyCORE-RK3288" - select BOARD_LATE_INIT + select BOARD_LATE_INIT help Add basic support for the PCM-947 carrier board, a RK3288 based development board made by PHYTEC. This board works in a combination
@@ -128,7 +128,7 @@ config TARGET_ROCK2 config TARGET_TINKER_RK3288 bool "Tinker-RK3288" - select BOARD_LATE_INIT + select BOARD_LATE_INIT select ROCKCHIP_COMMON_STACK_ADDR select TPL help
@@ -173,7 +173,7 @@ config SPL_SERIAL default y config TPL_STACK - default 0xff718000 + default 0xff718000 config TPL_SYS_MALLOC_F_LEN default 0x2000
arch/arm/mach-rockchip/rk3308/Kconfig +1 -1
@@ -5,7 +5,7 @@ config TARGET_EVB_RK3308 select BOARD_LATE_INIT config TARGET_ROC_RK3308_CC - bool "Firefly roc-rk3308-cc" + bool "Firefly roc-rk3308-cc" select BOARD_LATE_INIT config ROCKCHIP_BOOT_MODE_REG
arch/arm/mach-rockchip/rk3368/Kconfig +9 -9
@@ -13,14 +13,14 @@ config TARGET_GEEKBOX bool "GeekBox" config TARGET_EVB_PX5 - bool "Evb-PX5" + bool "Evb-PX5" select ARCH_EARLY_INIT_R - help - PX5 EVB is designed by Rockchip for automotive field - with integrated CVBS (TP2825) / MIPI DSI / CSI / LVDS - HDMI video input/output interface, audio codec ES8396, - WIFI/BT (on RTL8723BS), Gsensor BMA250E and light&proximity - sensor STK3410. + help + PX5 EVB is designed by Rockchip for automotive field + with integrated CVBS (TP2825) / MIPI DSI / CSI / LVDS + HDMI video input/output interface, audio codec ES8396, + WIFI/BT (on RTL8723BS), Gsensor BMA250E and light&proximity + sensor STK3410. endchoice config ROCKCHIP_BOOT_MODE_REG
@@ -49,9 +49,9 @@ config SPL_STACK_R_ADDR default 0x04000000 config TPL_STACK - default 0xff8cffff + default 0xff8cffff config TPL_TEXT_BASE - default 0xff8c1000 + default 0xff8c1000 endif
arch/arm/mach-rockchip/rk3399/Kconfig +2 -2
@@ -145,10 +145,10 @@ config TPL_LDSCRIPT default "arch/arm/mach-rockchip/u-boot-tpl-v8.lds" config TPL_STACK - default 0xff8effff + default 0xff8effff config TPL_TEXT_BASE - default 0xff8c2000 + default 0xff8c2000 if BOOTCOUNT_LIMIT
arch/arm/mach-rockchip/rv1126/Kconfig +1 -1
@@ -47,7 +47,7 @@ config TPL_LDSCRIPT default "arch/arm/mach-rockchip/u-boot-tpl.lds" config TPL_STACK - default 0xff718000 + default 0xff718000 config TPL_SYS_MALLOC_F_LEN default 0x2000
arch/arm/mach-socfpga/Kconfig +2 -2
@@ -15,8 +15,8 @@ config SOCFPGA_SECURE_VAB_AUTH select SHA512 select SPL_FIT_IMAGE_POST_PROCESS help - All images loaded from FIT will be authenticated by Secure Device - Manager. + All images loaded from FIT will be authenticated by Secure Device + Manager. config SOCFPGA_SECURE_VAB_AUTH_ALLOW_NON_FIT_IMAGE bool "Allow non-FIT VAB signed images"
arch/arm/mach-sti/Kconfig +1 -1
@@ -14,7 +14,7 @@ config TARGET_STIH410_B2260 Specifications. Features: - 1GB DDR - On-Board USB combo WiFi/Bluetooth RTL8723BU - with PCB soldered antenna + with PCB soldered antenna - Ethernet 1000-BaseT - Sata - HDMI
arch/arm/mach-stm32mp/Kconfig +27 -27
107 lines not on this page · raw message
arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig +11 -11
@@ -10,10 +10,10 @@ config CMD_STM32PROG imply DFU_MMC if MMC imply DFU_MTD if MTD help - activate a specific command stm32prog for STM32MP soc family - witch update the device with the tools STM32CubeProgrammer - NB: access to not volatile memory (NOR/NAND/SD/eMMC) is based - on U-Boot DFU framework + activate a specific command stm32prog for STM32MP soc family + witch update the device with the tools STM32CubeProgrammer + NB: access to not volatile memory (NOR/NAND/SD/eMMC) is based + on U-Boot DFU framework config CMD_STM32PROG_USB bool "support stm32prog over USB"
@@ -21,9 +21,9 @@ config CMD_STM32PROG_USB depends on USB_GADGET_DOWNLOAD default y help - activate the command "stm32prog usb" for STM32MP soc family - witch update the device with the tools STM32CubeProgrammer, - using USB with DFU protocol + activate the command "stm32prog usb" for STM32MP soc family + witch update the device with the tools STM32CubeProgrammer, + using USB with DFU protocol config CMD_STM32PROG_SERIAL bool "support stm32prog over UART"
@@ -32,13 +32,13 @@ config CMD_STM32PROG_SERIAL imply SILENT_CONSOLE default y help - activate the command "stm32prog serial" for STM32MP soc family - with the tools STM32CubeProgrammer using U-Boot serial device - and UART protocol. + activate the command "stm32prog serial" for STM32MP soc family + with the tools STM32CubeProgrammer using U-Boot serial device + and UART protocol. config CMD_STM32PROG_OTP bool "support stm32prog for OTP update" depends on CMD_STM32PROG default y if ARM_SMCCC || OPTEE help - Support the OTP update with the command "stm32prog" for STM32MP + Support the OTP update with the command "stm32prog" for STM32MP
arch/arm/mach-sunxi/Kconfig +225 -225
761 lines not on this page · raw message
arch/arm/mach-uniphier/Kconfig +1 -1
@@ -4,7 +4,7 @@ config SYS_CONFIG_NAME default "uniphier" choice - prompt "UniPhier SoC select" + prompt "UniPhier SoC select" config ARCH_UNIPHIER_V7_MULTI bool "UniPhier V7 SoCs"
--
2.39.5
Re: [PATCH v1 6/8] Kconfig: arm: restyle
Quoted 7 lines · Johan Jonker
Restyle all Kconfigs for "arm":
Menu entries : no space left
Menu attributes: 1 TAB
Help text : 1 TAB + 2 spaces
Replace '---help---' by 'help'Signed-off-by Johan Jonker <[email protected]>
Signature · 1 line
Tom
PATCH 7/8 Kconfig: arch: restyle
In reply to Johan JonkerRestyle all Kconfigs other then "arm":
Menu entries : no space left
Menu attributes: 1 TAB
Help text : 1 TAB + 2 spaces
--- arch/Kconfig | 16 ++++++------ arch/m68k/Kconfig | 34 ++++++++++++------------ arch/mips/Kconfig | 8 +++--- arch/mips/mach-octeon/Kconfig | 8 +++--- arch/powerpc/cpu/mpc85xx/Kconfig | 44 ++++++++++++++++---------------- arch/x86/Kconfig | 20 +++++++-------- 6 files changed, 65 insertions(+), 65 deletions(-)
arch/Kconfig +8 -8
@@ -11,14 +11,14 @@ config HAVE_ARCH_IOREMAP config HAVE_SETJMP bool help - The architecture supports setjmp() and longjmp(). + The architecture supports setjmp() and longjmp(). config HAVE_INITJMP bool depends on HAVE_SETJMP help - The architecture supports initjmp(), a non-standard companion to - setjmp() and longjmp(). + The architecture supports initjmp(), a non-standard companion to + setjmp() and longjmp(). config SUPPORT_BIG_ENDIAN bool
@@ -457,11 +457,11 @@ config SYS_CONFIG_NAME config SYS_DISABLE_DCACHE_OPS bool help - This option disables dcache flush and dcache invalidation - operations. For example, on coherent systems where cache - operatios are not required, enable this option to avoid them. - Note that, its up to the individual architectures to implement - this functionality. + This option disables dcache flush and dcache invalidation + operations. For example, on coherent systems where cache + operatios are not required, enable this option to avoid them. + Note that, its up to the individual architectures to implement + this functionality. config SYS_IMMR hex "Address for the Internal Memory-Mapped Registers (IMMR) window"
arch/m68k/Kconfig +17 -17
@@ -11,56 +11,56 @@ config STATIC_RELA config MCF520x select OF_CONTROL select DM - select DM_SERIAL + select DM_SERIAL select ARCH_COLDFIRE bool config MCF52x2 select OF_CONTROL select DM - select DM_SERIAL + select DM_SERIAL select ARCH_COLDFIRE bool config MCF523x select OF_CONTROL select DM - select DM_SERIAL + select DM_SERIAL select ARCH_COLDFIRE bool config MCF530x select OF_CONTROL select DM - select DM_SERIAL + select DM_SERIAL select ARCH_COLDFIRE bool config MCF5301x select OF_CONTROL select DM - select DM_SERIAL + select DM_SERIAL select ARCH_COLDFIRE bool config MCF532x select OF_CONTROL select DM - select DM_SERIAL + select DM_SERIAL select ARCH_COLDFIRE bool config MCF537x select OF_CONTROL select DM - select DM_SERIAL + select DM_SERIAL select ARCH_COLDFIRE bool config MCF5441x select OF_CONTROL select DM - select DM_SERIAL + select DM_SERIAL select ARCH_COLDFIRE select CREATE_ARCH_SYMLINK bool
@@ -191,17 +191,17 @@ config TARGET_AMCORE select M5307 config TARGET_STMARK2 - bool "Support stmark2" - select CF_DSPI - select M54418 + bool "Support stmark2" + select CF_DSPI + select M54418 config TARGET_QEMU_M68K - bool "Support QEMU m68k virt" - select M68040 - imply CMD_DM - help - This target supports the QEMU m68k virtual machine (-M virt). - It simulates a Motorola 68040 CPU with Goldfish peripherals. + bool "Support QEMU m68k virt" + select M68040 + imply CMD_DM + help + This target supports the QEMU m68k virtual machine (-M virt). + It simulates a Motorola 68040 CPU with Goldfish peripherals. endchoice
arch/mips/Kconfig +4 -4
@@ -267,8 +267,8 @@ config CPU_MIPS64_OCTEON select 64BIT select SPL_64BIT if SPL help - Choose this option for Marvell Octeon CPUs. These CPUs are between - MIPS64 R5 and R6 with other extensions. + Choose this option for Marvell Octeon CPUs. These CPUs are between + MIPS64 R5 and R6 with other extensions. endchoice
@@ -351,7 +351,7 @@ config MIPS_RELOCATION_TABLE_SIZE range 0x100 0x10000 default "0xc000" if TARGET_MALTA default "0x8000" - ---help--- + help A table of relocation data will be appended to the U-Boot binary and parsed in relocate_code() to fix up all offsets in the relocated U-Boot.
@@ -526,7 +526,7 @@ config MIPS_SRAM_INIT config DMA_ADDR_T_64BIT bool help - Select this to enable 64-bit DMA addressing + Select this to enable 64-bit DMA addressing config SYS_DCACHE_SIZE int
arch/mips/mach-octeon/Kconfig +4 -4
@@ -25,8 +25,8 @@ choice config SOC_OCTEON3 bool "Octeon III family" help - This selects the Octeon III SoC family CN70xx, CN73XX, CN78xx - and CNF75XX. + This selects the Octeon III SoC family CN70xx, CN73XX, CN78xx + and CNF75XX. endchoice
@@ -38,14 +38,14 @@ config TARGET_OCTEON_EBB7304 bool "Marvell Octeon EBB7304" select OCTEON_CN73XX help - Choose this for the Octeon EBB7304 board + Choose this for the Octeon EBB7304 board config TARGET_OCTEON_NIC23 bool "Marvell Octeon NIC23" select ARCH_MISC_INIT select OCTEON_CN73XX help - Choose this for the Octeon NIC23 board + Choose this for the Octeon NIC23 board endchoice
arch/powerpc/cpu/mpc85xx/Kconfig +22 -22
104 lines not on this page · raw message
arch/x86/Kconfig +10 -10
@@ -44,9 +44,9 @@ config X86_RUN_64BIT_NO_SPL bool "64-bit" select X86_64 help - Build U-Boot as a 64-bit binary without SPL. As U-Boot enters - in 64-bit mode, the assumption is that the silicon is fully - initialized (MP, page tables, etc.). + Build U-Boot as a 64-bit binary without SPL. As U-Boot enters + in 64-bit mode, the assumption is that the silicon is fully + initialized (MP, page tables, etc.). endchoice
@@ -585,11 +585,11 @@ config DCACHE_RAM_MRC_VAR_SIZE not boot. config HAVE_REFCODE - bool "Add a Reference Code binary" - help - Select this option to add a Reference Code binary to the resulting - U-Boot image. This is an Intel binary blob that handles system - initialisation, in this case the PCH and System Agent. + bool "Add a Reference Code binary" + help + Select this option to add a Reference Code binary to the resulting + U-Boot image. This is an Intel binary blob that handles system + initialisation, in this case the PCH and System Agent. Note: Without this binary (on platforms that need it such as broadwell) U-Boot will be missing some critical setup steps.
@@ -617,8 +617,8 @@ config SMP_AP_WORK bool depends on SMP help - Allow APs to do other work after initialisation instead of going - to sleep. + Allow APs to do other work after initialisation instead of going + to sleep. config MAX_CPUS int "Maximum number of CPUs permitted"
--
2.39.5
Re: [PATCH v1 7/8] Kconfig: arch: restyle
Quoted 6 lines · Johan Jonker
Restyle all Kconfigs other then "arm":
Menu entries : no space left
Menu attributes: 1 TAB
Help text : 1 TAB + 2 spacesSigned-off-by Johan Jonker <[email protected]>
Signature · 1 line
Tom
PATCH 8/8 Kconfig: board: restyle
In reply to Johan JonkerRestyle all Kconfigs:
Menu entries : no space left
Menu attributes: 1 TAB
Help text : 1 TAB + 2 spaces
--- board/alliedtelesis/SBx81LIFKW/Kconfig | 2 +- board/alliedtelesis/SBx81LIFXCAT/Kconfig | 2 +- board/beagle/beagleboneai64/Kconfig | 4 +- board/beagle/beagleplay/Kconfig | 12 ++--- board/beagle/beagley-ai/Kconfig | 2 +- board/cortina/common/Kconfig | 10 ++-- board/cortina/presidio-asic/Kconfig | 2 +- board/firefly/roc-pc-rk3399/Kconfig | 2 +- board/imgtec/boston/Kconfig | 2 +- board/logicpd/imx6/Kconfig | 2 +- board/nxp/ls1012ardb/Kconfig | 2 +- board/nxp/mx6memcal/Kconfig | 60 ++++++++++++------------ board/out4/o4-imx6ull-nano/Kconfig | 20 ++++---- board/phytec/common/Kconfig | 18 +++---- board/phytec/common/k3/Kconfig | 4 +- board/phytec/phycore_am62ax/Kconfig | 4 +- board/phytec/phycore_am62x/Kconfig | 40 ++++++++-------- board/phytec/phycore_am64x/Kconfig | 34 +++++++------- board/phytec/phycore_am68x/Kconfig | 4 +- board/samsung/axy17lte/Kconfig | 12 ++--- board/siemens/draco/Kconfig | 4 +- board/socionext/developerbox/Kconfig | 8 ++-- board/sysam/amcore/Kconfig | 6 +-- board/ti/am62ax/Kconfig | 2 +- board/ti/am62px/Kconfig | 2 +- board/ti/am62x/Kconfig | 4 +- board/ti/am64x/Kconfig | 4 +- board/ti/am65x/Kconfig | 4 +- board/ti/common/Kconfig | 4 +- board/ti/j7200/Kconfig | 4 +- board/ti/j721e/Kconfig | 4 +- board/ti/j721s2/Kconfig | 4 +- board/ti/j722s/Kconfig | 2 +- board/ti/j784s4/Kconfig | 8 ++-- board/toradex/apalis_imx6/Kconfig | 12 ++--- board/toradex/aquila-am69/Kconfig | 4 +- board/toradex/colibri_imx6/Kconfig | 2 +- board/toradex/verdin-am62p/Kconfig | 28 +++++------ board/traverse/common/Kconfig | 4 +- board/xilinx/Kconfig | 2 +- 40 files changed, 175 insertions(+), 175 deletions(-)
board/alliedtelesis/SBx81LIFKW/Kconfig +1 -1
@@ -4,7 +4,7 @@ config SYS_BOARD default "SBx81LIFKW" config SYS_VENDOR - default "alliedtelesis" + default "alliedtelesis" config SYS_CONFIG_NAME default "SBx81LIFKW"
board/alliedtelesis/SBx81LIFXCAT/Kconfig +1 -1
@@ -4,7 +4,7 @@ config SYS_BOARD default "SBx81LIFXCAT" config SYS_VENDOR - default "alliedtelesis" + default "alliedtelesis" config SYS_CONFIG_NAME default "SBx81LIFXCAT"
board/beagle/beagleboneai64/Kconfig +2 -2
@@ -34,7 +34,7 @@ config SYS_BOARD default "beagleboneai64" config SYS_VENDOR - default "beagle" + default "beagle" config SYS_CONFIG_NAME default "beagleboneai64"
@@ -49,7 +49,7 @@ config SYS_BOARD default "beagleboneai64" config SYS_VENDOR - default "beagle" + default "beagle" config SYS_CONFIG_NAME default "beagleboneai64"
board/beagle/beagleplay/Kconfig +6 -6
@@ -30,13 +30,13 @@ endchoice if TARGET_AM625_A53_BEAGLEPLAY config SYS_BOARD - default "beagleplay" + default "beagleplay" config SYS_VENDOR - default "beagle" + default "beagle" config SYS_CONFIG_NAME - default "beagleplay" + default "beagleplay" source "board/ti/common/Kconfig"
@@ -45,13 +45,13 @@ endif if TARGET_AM625_R5_BEAGLEPLAY config SYS_BOARD - default "beagleplay" + default "beagleplay" config SYS_VENDOR - default "beagle" + default "beagle" config SYS_CONFIG_NAME - default "beagleplay" + default "beagleplay" config SPL_LDSCRIPT default "arch/arm/mach-omap2/u-boot-spl.lds"
board/beagle/beagley-ai/Kconfig +1 -1
@@ -9,7 +9,7 @@ config SYS_BOARD default "beagley-ai" config SYS_VENDOR - default "beagle" + default "beagle" config SYS_CONFIG_NAME default "beagley_ai"
board/cortina/common/Kconfig +5 -5
@@ -1,6 +1,6 @@ config CORTINA_PLATFORM - bool "Cortina-Access Platform" - default y - help - Select this option for Cortina-Access platforms - to enables selection of CAxxxx drivers + bool "Cortina-Access Platform" + default y + help + Select this option for Cortina-Access platforms + to enables selection of CAxxxx drivers
board/cortina/presidio-asic/Kconfig +1 -1
@@ -1,7 +1,7 @@ if TARGET_PRESIDIO_ASIC config BIT64 bool - default y + default y select SOC_CA7774
board/firefly/roc-pc-rk3399/Kconfig +1 -1
@@ -4,7 +4,7 @@ config SYS_BOARD default "roc-pc-rk3399" config SYS_VENDOR - default "firefly" + default "firefly" config SYS_CONFIG_NAME default "roc-pc-rk3399"
board/imgtec/boston/Kconfig +1 -1
@@ -11,7 +11,7 @@ config SYS_CONFIG_NAME config ENV_SOURCE_FILE - default "boston" + default "boston" config TEXT_BASE default 0x9fc00000 if 32BIT
board/logicpd/imx6/Kconfig +1 -1
@@ -4,7 +4,7 @@ config SYS_BOARD default "imx6" config SYS_VENDOR - default "logicpd" + default "logicpd" config SYS_CONFIG_NAME default "imx6_logic"
board/nxp/ls1012ardb/Kconfig +1 -1
@@ -63,7 +63,7 @@ config SYS_BOARD default "ls1012ardb" config SYS_VENDOR - default "nxp" + default "nxp" config SYS_SOC default "fsl-layerscape"
board/nxp/mx6memcal/Kconfig +30 -30
72 lines not on this page · raw message
board/out4/o4-imx6ull-nano/Kconfig +10 -10
@@ -13,21 +13,21 @@ choice prompt "Memory model" default K4B4G1646D_BCMA help - Memory type setup. + Memory type setup. Please choose correct memory model here. config K4B4G1646D_BCMA bool "K4B4G1646D-BCMA 256Mx16 (512 MiB/chip)" help - Samsung DDR3 SDRAM - K4B4G1646D-BCMA + Samsung DDR3 SDRAM + K4B4G1646D-BCMA config MT41K256M16HA_125E bool "MT41K256M16HA-125:E 256Mx16 (512 MiB/chip)" help - Micron DDR3L SDRAM - MT41K256M16HA-125:E + Micron DDR3L SDRAM + MT41K256M16HA-125:E endchoice
@@ -35,21 +35,21 @@ choice prompt "Mainboard model" default O4_IMX_NANO help - Mainboard setup. + Mainboard setup. Please choose correct main board model here. config O4_IMX_NANO bool "O4-iMX-NANO" help - A baseboard for EV-iMX280-NANO module: - https://out4.ru/products/board/18-o4-imx-nano.html + A baseboard for EV-iMX280-NANO module: + https://out4.ru/products/board/18-o4-imx-nano.html config EV_IMX280_NANO_X_MB bool "EV-IMX280-NANO-X-MB" help - A simple baseboard for EV-iMX280-NANO module: - http://evodbg.net/products/mx28-eval-kits/14-ev-imx280-nano-x-mb.html + A simple baseboard for EV-iMX280-NANO module: + http://evodbg.net/products/mx28-eval-kits/14-ev-imx280-nano-x-mb.html endchoice
board/phytec/common/Kconfig +9 -9
@@ -2,14 +2,14 @@ config PHYTEC_SOM_DETECTION bool "Support SoM detection for PHYTEC platforms" select SPL_CRC8 if SPL help - Support of I2C EEPROM based SoM detection. + Support of I2C EEPROM based SoM detection. config PHYTEC_SOM_DETECTION_BLOCKS bool "Extend SoM detection with block support" depends on PHYTEC_SOM_DETECTION help - Extend the I2C EEPROM based SoM detection with API v3. This API - introduces blocks with different payloads. + Extend the I2C EEPROM based SoM detection with API v3. This API + introduces blocks with different payloads. config PHYTEC_IMX8M_SOM_DETECTION bool "Support SoM detection for i.MX8M PHYTEC platforms"
@@ -35,8 +35,8 @@ config PHYTEC_AM62_SOM_DETECTION depends on SPL_I2C && DM_I2C default y help - Support of I2C EEPROM based SoM detection. Supported - for PHYTEC AM62x boards. + Support of I2C EEPROM based SoM detection. Supported + for PHYTEC AM62x boards. config PHYTEC_AM62A_SOM_DETECTION bool "Support SoM detection for AM62Ax PHYTEC platforms"
@@ -46,8 +46,8 @@ config PHYTEC_AM62A_SOM_DETECTION depends on SPL_I2C && DM_I2C default y help - Support of I2C EEPROM based SoM detection. Supported - for PHYTEC AM62Ax boards. + Support of I2C EEPROM based SoM detection. Supported + for PHYTEC AM62Ax boards. config PHYTEC_AM64_SOM_DETECTION bool "Support SoM detection for AM64x PHYTEC platforms"
@@ -57,8 +57,8 @@ config PHYTEC_AM64_SOM_DETECTION depends on SPL_I2C && DM_I2C default y help - Support of I2C EEPROM based SoM detection. Supported - for PHYTEC AM64x boards. + Support of I2C EEPROM based SoM detection. Supported + for PHYTEC AM64x boards. config PHYTEC_EEPROM_BUS int "Board EEPROM's I2C bus number"
board/phytec/common/k3/Kconfig +2 -2
@@ -1,5 +1,5 @@ config PHYTEC_K3_DDR_PATCH bool "Patch DDR timings on PHYTEC K3 SoMs" help - Allow to override default DDR timings prior to - DDRSS driver probing. + Allow to override default DDR timings prior to + DDRSS driver probing.
board/phytec/phycore_am62ax/Kconfig +2 -2
@@ -9,7 +9,7 @@ config SYS_BOARD default "phycore_am62ax" config SYS_VENDOR - default "phytec" + default "phytec" config SYS_CONFIG_NAME default "phycore_am62ax"
@@ -24,7 +24,7 @@ config SYS_BOARD default "phycore_am62ax" config SYS_VENDOR - default "phytec" + default "phytec" config SYS_CONFIG_NAME default "phycore_am62ax"
board/phytec/phycore_am62x/Kconfig +20 -20
@@ -9,7 +9,7 @@ config SYS_BOARD default "phycore_am62x" config SYS_VENDOR - default "phytec" + default "phytec" config SYS_CONFIG_NAME default "phycore_am62x"
@@ -24,7 +24,7 @@ config SYS_BOARD default "phycore_am62x" config SYS_VENDOR - default "phytec" + default "phytec" config SYS_CONFIG_NAME default "phycore_am62x"
@@ -38,31 +38,31 @@ source "board/phytec/common/k3/Kconfig" endif config PHYCORE_AM62X_RAM_SIZE_FIX - bool "Set phyCORE-AM62x RAM size fix instead of detecting" - default false - help - RAM size is automatic being detected with the help of - the EEPROM introspection data. Set RAM size to a fix value - instead. + bool "Set phyCORE-AM62x RAM size fix instead of detecting" + default false + help + RAM size is automatic being detected with the help of + the EEPROM introspection data. Set RAM size to a fix value + instead. choice - prompt "phyCORE-AM62x RAM size" - depends on PHYCORE_AM62X_RAM_SIZE_FIX - default PHYCORE_AM62X_RAM_SIZE_2GB + prompt "phyCORE-AM62x RAM size" + depends on PHYCORE_AM62X_RAM_SIZE_FIX + default PHYCORE_AM62X_RAM_SIZE_2GB config PHYCORE_AM62X_RAM_SIZE_1GB - bool "1GB RAM" - help - Set RAM size fix to 1GB for phyCORE-AM62x. + bool "1GB RAM" + help + Set RAM size fix to 1GB for phyCORE-AM62x. config PHYCORE_AM62X_RAM_SIZE_2GB - bool "2GB RAM" - help - Set RAM size fix to 2GB for phyCORE-AM62x. + bool "2GB RAM" + help + Set RAM size fix to 2GB for phyCORE-AM62x. config PHYCORE_AM62X_RAM_SIZE_4GB - bool "4GB RAM" - help - Set RAM size fix to 4GB for phyCORE-AM62x. + bool "4GB RAM" + help + Set RAM size fix to 4GB for phyCORE-AM62x. endchoice
board/phytec/phycore_am64x/Kconfig +17 -17
@@ -12,7 +12,7 @@ config SYS_BOARD default "phycore_am64x" config SYS_VENDOR - default "phytec" + default "phytec" config SYS_CONFIG_NAME default "phycore_am64x"
@@ -27,7 +27,7 @@ config SYS_BOARD default "phycore_am64x" config SYS_VENDOR - default "phytec" + default "phytec" config SYS_CONFIG_NAME default "phycore_am64x"
@@ -37,26 +37,26 @@ source "board/phytec/common/Kconfig" endif config PHYCORE_AM64X_RAM_SIZE_FIX - bool "Set phyCORE-AM64x RAM size fix instead of detecting" - default false - help - RAM size is automatic being detected with the help of - the EEPROM introspection data. Set RAM size to a fix value - instead. + bool "Set phyCORE-AM64x RAM size fix instead of detecting" + default false + help + RAM size is automatic being detected with the help of + the EEPROM introspection data. Set RAM size to a fix value + instead. choice - prompt "phyCORE-AM64x RAM size" - depends on PHYCORE_AM64X_RAM_SIZE_FIX - default PHYCORE_AM64X_RAM_SIZE_2GB + prompt "phyCORE-AM64x RAM size" + depends on PHYCORE_AM64X_RAM_SIZE_FIX + default PHYCORE_AM64X_RAM_SIZE_2GB config PHYCORE_AM64X_RAM_SIZE_1GB - bool "1GB RAM" - help - Set RAM size fix to 1GB for phyCORE-AM64x. + bool "1GB RAM" + help + Set RAM size fix to 1GB for phyCORE-AM64x. config PHYCORE_AM64X_RAM_SIZE_2GB - bool "2GB RAM" - help - Set RAM size fix to 2GB for phyCORE-AM64x. + bool "2GB RAM" + help + Set RAM size fix to 2GB for phyCORE-AM64x. endchoice
board/phytec/phycore_am68x/Kconfig +2 -2
@@ -9,7 +9,7 @@ config SYS_BOARD default "phycore_am68x" config SYS_VENDOR - default "phytec" + default "phytec" config SYS_CONFIG_NAME default "phycore_am68x"
@@ -27,7 +27,7 @@ config SYS_BOARD default "phycore_am68x" config SYS_VENDOR - default "phytec" + default "phytec" config SYS_CONFIG_NAME default "phycore_am68x"
board/samsung/axy17lte/Kconfig +6 -6
@@ -11,8 +11,8 @@ config SYS_CONFIG_NAME default "exynos78x0-common" config EXYNOS7880 - bool "Exynos 7880 SOC support" - default y + bool "Exynos 7880 SOC support" + default y endif if TARGET_A7Y17LTE
@@ -28,8 +28,8 @@ config SYS_CONFIG_NAME default "exynos78x0-common" config EXYNOS7880 - bool "Exynos 7880 SOC support" - default y + bool "Exynos 7880 SOC support" + default y endif if TARGET_A3Y17LTE
@@ -45,6 +45,6 @@ config SYS_CONFIG_NAME default "exynos78x0-common" config EXYNOS7870 - bool "Exynos 7870 SOC support" - default y + bool "Exynos 7870 SOC support" + default y endif
board/siemens/draco/Kconfig +2 -2
@@ -33,10 +33,10 @@ endif if TARGET_ETAMIN config SYS_BOARD - default "draco" + default "draco" config SYS_VENDOR - default "siemens" + default "siemens" config SYS_SOC default "am33xx"
board/socionext/developerbox/Kconfig +4 -4
@@ -11,10 +11,10 @@ config TARGET_DEVELOPERBOX select SYS_DISABLE_DCACHE_OPS select OF_BOARD_SETUP help - Choose this option if you build the U-Boot for the DeveloperBox - 96boards Enterprise Edition. - This board will booted from SCP firmware and it enables SMMU, thus - the dcache is updated automatically when DMA operation is executed. + Choose this option if you build the U-Boot for the DeveloperBox + 96boards Enterprise Edition. + This board will booted from SCP firmware and it enables SMMU, thus + the dcache is updated automatically when DMA operation is executed. endchoice config SYS_SOC
board/sysam/amcore/Kconfig +3 -3
@@ -4,13 +4,13 @@ config SYS_CPU default "mcf530x" config SYS_BOARD - default "amcore" + default "amcore" config SYS_VENDOR - default "sysam" + default "sysam" config SYS_CONFIG_NAME - default "amcore" + default "amcore" endif
board/ti/am62ax/Kconfig +1 -1
@@ -9,7 +9,7 @@ config SYS_BOARD default "am62ax" config SYS_VENDOR - default "ti" + default "ti" config SYS_CONFIG_NAME default "am62ax_evm"
board/ti/am62px/Kconfig +1 -1
@@ -9,7 +9,7 @@ config SYS_BOARD default "am62px" config SYS_VENDOR - default "ti" + default "ti" config SYS_CONFIG_NAME default "am62px_evm"
board/ti/am62x/Kconfig +2 -2
@@ -9,7 +9,7 @@ config SYS_BOARD default "am62x" config SYS_VENDOR - default "ti" + default "ti" config SYS_CONFIG_NAME default "am62x_evm"
@@ -24,7 +24,7 @@ config SYS_BOARD default "am62x" config SYS_VENDOR - default "ti" + default "ti" config SYS_CONFIG_NAME default "am62x_evm"
board/ti/am64x/Kconfig +2 -2
@@ -8,7 +8,7 @@ config SYS_BOARD default "am64x" config SYS_VENDOR - default "ti" + default "ti" config SYS_CONFIG_NAME default "am64x_evm"
@@ -23,7 +23,7 @@ config SYS_BOARD default "am64x" config SYS_VENDOR - default "ti" + default "ti" config SYS_CONFIG_NAME default "am64x_evm"
board/ti/am65x/Kconfig +2 -2
@@ -9,7 +9,7 @@ config SYS_BOARD default "am65x" config SYS_VENDOR - default "ti" + default "ti" config SYS_CONFIG_NAME default "am65x_evm"
@@ -24,7 +24,7 @@ config SYS_BOARD default "am65x" config SYS_VENDOR - default "ti" + default "ti" config SYS_CONFIG_NAME default "am65x_evm"
board/ti/common/Kconfig +2 -2
@@ -1,8 +1,8 @@ config TI_I2C_BOARD_DETECT bool "Support for Board detection for TI platforms" help - Support for detection board information on Texas Instrument's - Evaluation Boards which have I2C based EEPROM detection + Support for detection board information on Texas Instrument's + Evaluation Boards which have I2C based EEPROM detection config EEPROM_BUS_ADDRESS int "Board EEPROM's I2C bus address"
board/ti/j7200/Kconfig +2 -2
@@ -9,7 +9,7 @@ config SYS_BOARD default "j7200" config SYS_VENDOR - default "ti" + default "ti" config SYS_CONFIG_NAME default "j721e_evm"
@@ -27,7 +27,7 @@ config SYS_BOARD default "j7200" config SYS_VENDOR - default "ti" + default "ti" config SYS_CONFIG_NAME default "j721e_evm"
board/ti/j721e/Kconfig +2 -2
@@ -9,7 +9,7 @@ config SYS_BOARD default "j721e" config SYS_VENDOR - default "ti" + default "ti" config SYS_CONFIG_NAME default "j721e_evm"
@@ -27,7 +27,7 @@ config SYS_BOARD default "j721e" config SYS_VENDOR - default "ti" + default "ti" config SYS_CONFIG_NAME default "j721e_evm"
board/ti/j721s2/Kconfig +2 -2
@@ -9,7 +9,7 @@ config SYS_BOARD default "j721s2" config SYS_VENDOR - default "ti" + default "ti" config SYS_CONFIG_NAME default "j721s2_evm"
@@ -27,7 +27,7 @@ config SYS_BOARD default "j721s2" config SYS_VENDOR - default "ti" + default "ti" config SYS_CONFIG_NAME default "j721s2_evm"
board/ti/j722s/Kconfig +1 -1
@@ -9,7 +9,7 @@ config SYS_BOARD default "j722s" config SYS_VENDOR - default "ti" + default "ti" config SYS_CONFIG_NAME default "j722s_evm"
board/ti/j784s4/Kconfig +4 -4
@@ -9,7 +9,7 @@ config SYS_BOARD default "j784s4" config SYS_VENDOR - default "ti" + default "ti" config SYS_CONFIG_NAME default "j784s4_evm"
@@ -24,7 +24,7 @@ config SYS_BOARD default "j784s4" config SYS_VENDOR - default "ti" + default "ti" config SYS_CONFIG_NAME default "j784s4_evm"
@@ -42,7 +42,7 @@ config SYS_BOARD default "j784s4" config SYS_VENDOR - default "ti" + default "ti" config SYS_CONFIG_NAME default "j784s4_evm"
@@ -57,7 +57,7 @@ config SYS_BOARD default "j784s4" config SYS_VENDOR - default "ti" + default "ti" config SYS_CONFIG_NAME default "j784s4_evm"
board/toradex/apalis_imx6/Kconfig +6 -6
@@ -35,7 +35,7 @@ config TDX_CMD_IMX_MFGR bool "Enable factory testing commands for Toradex iMX 6 modules" help This adds the commands - pf0100_otp_prog - Program the OTP fuses on the PMIC PF0100 + pf0100_otp_prog - Program the OTP fuses on the PMIC PF0100 If executed on already fused modules it doesn't change any fuse setting. default y
@@ -43,11 +43,11 @@ config TDX_APALIS_IMX6_V1_0 bool "Apalis iMX6 V1.0 HW" help Apalis iMX6 V1.0 HW has a different pinout for the UART. - The UARTs must be used in DCE mode, RTS/CTS are swapped and - thus unusable on standard carrier boards. - This option configures DCE mode unconditionally. Whithout this - option the config block stating V1.0 HW selects DCE mode, - otherwise the UARTs are configuered in DTE mode. + The UARTs must be used in DCE mode, RTS/CTS are swapped and + thus unusable on standard carrier boards. + This option configures DCE mode unconditionally. Whithout this + option the config block stating V1.0 HW selects DCE mode, + otherwise the UARTs are configuered in DTE mode. source "board/toradex/common/Kconfig"
board/toradex/aquila-am69/Kconfig +2 -2
@@ -9,7 +9,7 @@ config SYS_BOARD default "aquila-am69" config SYS_VENDOR - default "toradex" + default "toradex" config SYS_CONFIG_NAME default "aquila-am69"
@@ -48,7 +48,7 @@ config SYS_BOARD default "aquila-am69" config SYS_VENDOR - default "toradex" + default "toradex" config SYS_CONFIG_NAME default "aquila-am69"
board/toradex/colibri_imx6/Kconfig +1 -1
@@ -35,7 +35,7 @@ config TDX_CMD_IMX_MFGR bool "Enable factory testing commands for Toradex iMX 6 modules" help This adds the commands - pf0100_otp_prog - Program the OTP fuses on the PMIC PF0100 + pf0100_otp_prog - Program the OTP fuses on the PMIC PF0100 If executed on already fused modules it doesn't change any fuse setting. default y
board/toradex/verdin-am62p/Kconfig +14 -14
@@ -8,22 +8,22 @@ choice optional config TARGET_VERDIN_AM62P_A53 - bool "Toradex Verdin AM62P running on A53" - select ARM64 - select BINMAN - select OF_SYSTEM_SETUP - imply OF_UPSTREAM + bool "Toradex Verdin AM62P running on A53" + select ARM64 + select BINMAN + select OF_SYSTEM_SETUP + imply OF_UPSTREAM config TARGET_VERDIN_AM62P_R5 - bool "Toradex Verdin AM62P running on R5" - select CPU_V7R - select SYS_THUMB_BUILD - select K3_LOAD_SYSFW - select RAM - select SPL_RAM - select K3_DDRSS - select BINMAN - imply SYS_K3_SPL_ATF + bool "Toradex Verdin AM62P running on R5" + select CPU_V7R + select SYS_THUMB_BUILD + select K3_LOAD_SYSFW + select RAM + select SPL_RAM + select K3_DDRSS + select BINMAN + imply SYS_K3_SPL_ATF endchoice
board/traverse/common/Kconfig +2 -2
@@ -2,5 +2,5 @@ config TEN64_CONTROLLER bool "Enable Ten64 board controller driver" depends on TARGET_TEN64 help - Support for the board microcontroller on the Traverse - Ten64 family of boards. + Support for the board microcontroller on the Traverse + Ten64 family of boards.
board/xilinx/Kconfig +1 -1
@@ -67,7 +67,7 @@ config BOOT_SCRIPT_OFFSET default 0x7F80000 if ARCH_VERSAL || ARCH_VERSAL_NET || ARCH_VERSAL2 default 0 if TARGET_XILINX_MBV help - Specifies distro boot script offset in NAND/QSPI/NOR flash. + Specifies distro boot script offset in NAND/QSPI/NOR flash. config CMD_FRU bool "FRU information for product"
--
2.39.5
Re: [PATCH v1 8/8] Kconfig: board: restyle
Quoted 6 lines · Johan Jonker
Restyle all Kconfigs:
Menu entries : no space left
Menu attributes: 1 TAB
Help text : 1 TAB + 2 spacesSigned-off-by Johan Jonker <[email protected]>
Signature · 1 line
Tom
Quoted 8 lines · Johan Jonker
The
Kconfigmenu attribute '---help---' is deprecated. If we change to "help" the text has to indent. This again has to align with other attributes, so we have to restyle them as well.
And as there's a script then change allKconfigto start with the 'arch' and 'board' directories.[...]
Applied to u-boot/next, thanks!
[1/8] Kconfig: armv7: fix typo
commit: 0c0074f983cc97c0a721f44851fb48df4add2931
[2/8] Kconfig: powerpc: mpc85xx: fix typo
commit: 4b199a549fca5027fd24f9e2d951581c76a68845
[3/8] Kconfig: power: pmic: fix typo
commit: 08fc979a61aff7ede01a89d2b68b86128af64361
[4/8] Kconfig: themal: fix typo
commit: d20d285cf0b72347b7ba37694272206865d86824
[5/8] Kconfig: misc: add empty line
commit: 2ffe9687013b615a6053e3a85080433626c6f3b5
[6/8] Kconfig: arm: restyle
commit: 0caac78a06f21cbe25460bf8c0dbe8094f73cb73
[7/8] Kconfig: arch: restyle
commit: f952ddb7ece20997dd6c12250124d1e377693d44
[8/8] Kconfig: board: restyle
commit: df3d87bd695656f879604b2089434a64ef74dbb6Signature · 1 line
Tom