Skip to contentSkip to conversation

conf: am62dxx-evm: Fixup packaged overlay list

PATCH Superseded Judith Mendez 5 participants 10 messages Jun 9

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 conf: am62dxx-evm: Fixup packaged overlay list

Some k3-am62x-sk* overlays no longer apply to AM62A/AM62D boards, update overlay list packaged for AM62D mostly to include the new k3-am62a7-sk-mcan.dtbo without dropping applicable overlays.

---
 meta-ti-bsp/conf/machine/am62dxx-evm.conf | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
meta-ti-bsp/conf/machine/am62dxx-evm.conf +8 -1
index ef9df2f7..c776ffbf 100644
@@ -7,7 +7,14 @@ require conf/machine/include/am62dxx.inc
 KERNEL_DEVICETREE_PREFIX = " \
     ti/k3-am62d2 \
     ti/k3-am62a7-sk-edgeai \
-    ti/k3-am62x-sk \
+    ti/k3-am62x-sk-csi2 \
+    ti/k3-am62x-sk-ecap-capture \
+    ti/k3-am62x-sk-eqep \
+    ti/k3-am62x-sk-hdmi \
+    ti/k3-am62x-sk-lpm \
+    ti/k3-am62x-sk-mcspi-loopback \
+    ti/k3-am62x-sk-pwm \
+    ti/k3-am62a7-sk-mcan.dtbo \
     ti/k3-am62a7-sk-rpi-hdr-ehrpwm \
     ti/k3-am62a7-sk-e3-max-opp \
 "
Signature · 1 line
2.34.1
#1 lore raw

I assume this is for wrynose as well? If so, please make sure to add it on the subject going forward.

Quoted 29 lines · Judith Mendez

Some k3-am62x-sk* overlays no longer apply to AM62A/AM62D boards, update overlay list packaged for AM62D mostly to include the new k3-am62a7-sk-mcan.dtbo without dropping applicable overlays.

---
  meta-ti-bsp/conf/machine/am62dxx-evm.conf | 9 ++++++++-
  1 file changed, 8 insertions(+), 1 deletion(-)
meta-ti-bsp/conf/machine/am62dxx-evm.conf +8 -1
index ef9df2f7..c776ffbf 100644
@@ -7,7 +7,14 @@ require conf/machine/include/am62dxx.inc
  KERNEL_DEVICETREE_PREFIX = " \
      ti/k3-am62d2 \
      ti/k3-am62a7-sk-edgeai \
-    ti/k3-am62x-sk \
+    ti/k3-am62x-sk-csi2 \
+    ti/k3-am62x-sk-ecap-capture \
+    ti/k3-am62x-sk-eqep \
+    ti/k3-am62x-sk-hdmi \
+    ti/k3-am62x-sk-lpm \
+    ti/k3-am62x-sk-mcspi-loopback \
+    ti/k3-am62x-sk-pwm \
+    ti/k3-am62a7-sk-mcan.dtbo \
      ti/k3-am62a7-sk-rpi-hdr-ehrpwm \
      ti/k3-am62a7-sk-e3-max-opp \
  "
Signature · 3 lines
Ryan Eatmon                [email protected]
-----------------------------------------
Texas Instruments, Inc.  -  LCPD  -  MGTS
#2 lore raw
Quoted 15 lines · Ryan Eatmon via lists.yoctoproject.org

I assume this is for wrynose as well? If so, please make sure to add it on the subject going forward.

Quoted 9 lines · Judith Mendez

Some k3-am62x-sk* overlays no longer apply to AM62A/AM62D boards, update overlay list packaged for AM62D mostly to include the new k3-am62a7-sk-mcan.dtbo without dropping applicable overlays.

---
 meta-ti-bsp/conf/machine/am62dxx-evm.conf | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
Quoted 16 lines
Quoted 6 lines
meta-ti-bsp/conf/machine/am62dxx-evm.conf +0 -0
index ef9df2f7..c776ffbf 100644
@@ -7,7 +7,14 @@ require conf/machine/include/am62dxx.inc
 KERNEL_DEVICETREE_PREFIX = " \

meta-ti-bsp/conf/machine/am62dxx-evm.conf require conf/machine/include/am62dxx.inc · line 16

Quoted 10 lines
meta-ti-bsp/conf/machine/am62dxx-evm.conf +7 -1
     ti/k3-am62d2 \
     ti/k3-am62a7-sk-edgeai \
-    ti/k3-am62x-sk \
+    ti/k3-am62x-sk-csi2 \
+    ti/k3-am62x-sk-ecap-capture \
+    ti/k3-am62x-sk-eqep \
+    ti/k3-am62x-sk-hdmi \
+    ti/k3-am62x-sk-lpm \
+    ti/k3-am62x-sk-mcspi-loopback \
+    ti/k3-am62x-sk-pwm \

Why are these needed? Shouldn't the first removed more generic prefix cover them all?

Quoted 4 lines
Quoted 4 lines
meta-ti-bsp/conf/machine/am62dxx-evm.conf +1 -0
+    ti/k3-am62a7-sk-mcan.dtbo \
     ti/k3-am62a7-sk-rpi-hdr-ehrpwm \
     ti/k3-am62a7-sk-e3-max-opp \
 "
#3 lore raw
Quoted 27 lines · Denys Dmytriyenko
Quoted 26 lines · Ryan Eatmon via lists.yoctoproject.org

I assume this is for wrynose as well? If so, please make sure to add it on the subject going forward.

Quoted 20 lines · Judith Mendez

Some k3-am62x-sk* overlays no longer apply to AM62A/AM62D boards, update overlay list packaged for AM62D mostly to include the new k3-am62a7-sk-mcan.dtbo without dropping applicable overlays.

---
  meta-ti-bsp/conf/machine/am62dxx-evm.conf | 9 ++++++++-
  1 file changed, 8 insertions(+), 1 deletion(-)
meta-ti-bsp/conf/machine/am62dxx-evm.conf +2 -1
index ef9df2f7..c776ffbf 100644
@@ -7,7 +7,14 @@ require conf/machine/include/am62dxx.inc
  KERNEL_DEVICETREE_PREFIX = " \
      ti/k3-am62d2 \
      ti/k3-am62a7-sk-edgeai \
-    ti/k3-am62x-sk \
+    ti/k3-am62x-sk-csi2 \
+    ti/k3-am62x-sk-ecap-capture \
Quoted 11 lines
Quoted 5 lines

meta-ti-bsp/conf/machine/am62dxx-evm.conf require conf/machine/include/am62dxx.inc · line 16

Quoted 5 lines
meta-ti-bsp/conf/machine/am62dxx-evm.conf +5 -0
+    ti/k3-am62x-sk-eqep \
+    ti/k3-am62x-sk-hdmi \
+    ti/k3-am62x-sk-lpm \
+    ti/k3-am62x-sk-mcspi-loopback \
+    ti/k3-am62x-sk-pwm \

Why are these needed? Shouldn't the first removed more generic prefix cover them all?

Quoted 1 line
Quoted 1 line
meta-ti-bsp/conf/machine/am62dxx-evm.conf +1 -0
+    ti/k3-am62a7-sk-mcan.dtbo \

Also this one isn't a prefix, it is just a full DTBO file, why not:

ti/k3-am62a7-sk

or some smaller prefix so we get all the future new overlays.

Andrew

Quoted 13 lines
Quoted 13 lines
Quoted 13 lines
meta-ti-bsp/conf/machine/am62dxx-evm.conf +0 -1
      ti/k3-am62a7-sk-rpi-hdr-ehrpwm \
      ti/k3-am62a7-sk-e3-max-opp \
  "
 
 
-=-=-=-=-=-=-=-=-=-=-=-

Links: You receive all messages sent to this group.
View/Reply Online (#19996): https://lists.yoctoproject.org/g/meta-ti/message/19996
Mute This Topic: https://lists.yoctoproject.org/mt/119730108/3619733
Group Owner: [email protected]
Unsubscribe: https://lists.yoctoproject.org/g/meta-ti/unsub [[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-

#4 lore raw

Hi Andrew,

Quoted 38 lines · Andrew Davis
Quoted 37 lines · Denys Dmytriyenko
Quoted 15 lines · Ryan Eatmon via lists.yoctoproject.org

I assume this is for wrynose as well?  If so, please make sure to add it on the subject going forward.

Quoted 9 lines · Judith Mendez

Some k3-am62x-sk* overlays no longer apply to AM62A/AM62D boards, update overlay list packaged for AM62D mostly to include the new k3-am62a7-sk-mcan.dtbo without dropping applicable overlays.

---
  meta-ti-bsp/conf/machine/am62dxx-evm.conf | 9 ++++++++-

  1 file changed, 8 insertions(+), 1 deletion(-)
Quoted 16 lines
Quoted 6 lines
meta-ti-bsp/conf/machine/am62dxx-evm.conf +0 -0
index ef9df2f7..c776ffbf 100644
@@ -7,7 +7,14 @@ require conf/machine/include/am62dxx.inc
   KERNEL_DEVICETREE_PREFIX = " \

meta-ti-bsp/conf/machine/am62dxx-evm.conf require conf/machine/include/am62dxx.inc · line 16

Quoted 10 lines
meta-ti-bsp/conf/machine/am62dxx-evm.conf +7 -1
       ti/k3-am62d2 \
       ti/k3-am62a7-sk-edgeai \
-    ti/k3-am62x-sk \
+    ti/k3-am62x-sk-csi2 \
+    ti/k3-am62x-sk-ecap-capture \
+    ti/k3-am62x-sk-eqep \
+    ti/k3-am62x-sk-hdmi \
+    ti/k3-am62x-sk-lpm \
+    ti/k3-am62x-sk-mcspi-loopback \
+    ti/k3-am62x-sk-pwm \

Why are these needed? Shouldn't the first removed more generic prefix cover them all?

Quoted 8 lines
Quoted 1 line
Quoted 1 line

meta-ti-bsp/conf/machine/am62dxx-evm.conf require conf/machine/include/am62dxx.inc · line 17

Quoted 1 line
meta-ti-bsp/conf/machine/am62dxx-evm.conf +1 -0
+    ti/k3-am62a7-sk-mcan.dtbo \

Also this one isn't a prefix, it is just a full DTBO file, why not:

ti/k3-am62a7-sk

or some smaller prefix so we get all the future new overlays.

I was not sure if all ti/k3-am62a7-sk overlays applied to am62d, that is why I did not carry out that change. but I can do that if there are no objections

Quoted 15 lines
Quoted 14 lines
Quoted 14 lines
Quoted 14 lines
meta-ti-bsp/conf/machine/am62dxx-evm.conf +0 -0
       ti/k3-am62a7-sk-rpi-hdr-ehrpwm \
       ti/k3-am62a7-sk-e3-max-opp \

  "

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#19996): https://lists.yoctoproject.org/g/meta- ti/message/19996 Mute This Topic: https://lists.yoctoproject.org/mt/119730108/3619733
Group Owner: [email protected]
Unsubscribe: https://lists.yoctoproject.org/g/meta-ti/unsub [[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-

#5 lore raw
In reply to Denys Dmytriyenko

Hi Denys,

Quoted 27 lines · Denys Dmytriyenko
Quoted 26 lines · Ryan Eatmon via lists.yoctoproject.org

I assume this is for wrynose as well? If so, please make sure to add it on the subject going forward.

Quoted 20 lines · Judith Mendez

Some k3-am62x-sk* overlays no longer apply to AM62A/AM62D boards, update overlay list packaged for AM62D mostly to include the new k3-am62a7-sk-mcan.dtbo without dropping applicable overlays.

---
  meta-ti-bsp/conf/machine/am62dxx-evm.conf | 9 ++++++++-
  1 file changed, 8 insertions(+), 1 deletion(-)
meta-ti-bsp/conf/machine/am62dxx-evm.conf +2 -1
index ef9df2f7..c776ffbf 100644
@@ -7,7 +7,14 @@ require conf/machine/include/am62dxx.inc
  KERNEL_DEVICETREE_PREFIX = " \
      ti/k3-am62d2 \
      ti/k3-am62a7-sk-edgeai \
-    ti/k3-am62x-sk \
+    ti/k3-am62x-sk-csi2 \
+    ti/k3-am62x-sk-ecap-capture \
Quoted 8 lines
Quoted 5 lines

meta-ti-bsp/conf/machine/am62dxx-evm.conf require conf/machine/include/am62dxx.inc · line 16

Quoted 5 lines
meta-ti-bsp/conf/machine/am62dxx-evm.conf +5 -0
+    ti/k3-am62x-sk-eqep \
+    ti/k3-am62x-sk-hdmi \
+    ti/k3-am62x-sk-lpm \
+    ti/k3-am62x-sk-mcspi-loopback \
+    ti/k3-am62x-sk-pwm \

Why are these needed? Shouldn't the first removed more generic prefix cover them all?

Its explained in the commit message, some of the am62x-sk* overlays no longer apply to am62a or am62d. I did not go test each overlay, but for now, I removed the overlays that no longer apply to am62a/ am62d with this change

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
meta-ti-bsp/conf/machine/am62dxx-evm.conf +1 -0
+    ti/k3-am62a7-sk-mcan.dtbo \
      ti/k3-am62a7-sk-rpi-hdr-ehrpwm \
      ti/k3-am62a7-sk-e3-max-opp \
  "
#6 lore raw
Quoted 39 lines · Judith Mendez

Hi Denys,

Quoted 27 lines · Denys Dmytriyenko
Quoted 26 lines · Ryan Eatmon via lists.yoctoproject.org

I assume this is for wrynose as well? If so, please make sure to add it on the subject going forward.

Quoted 20 lines · Judith Mendez

Some k3-am62x-sk* overlays no longer apply to AM62A/AM62D boards, update overlay list packaged for AM62D mostly to include the new k3-am62a7-sk-mcan.dtbo without dropping applicable overlays.

---
 meta-ti-bsp/conf/machine/am62dxx-evm.conf | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
meta-ti-bsp/conf/machine/am62dxx-evm.conf +2 -1
index ef9df2f7..c776ffbf 100644
@@ -7,7 +7,14 @@ require conf/machine/include/am62dxx.inc
 KERNEL_DEVICETREE_PREFIX = " \
     ti/k3-am62d2 \
     ti/k3-am62a7-sk-edgeai \
-    ti/k3-am62x-sk \
+    ti/k3-am62x-sk-csi2 \
+    ti/k3-am62x-sk-ecap-capture \
Quoted 8 lines
Quoted 5 lines

meta-ti-bsp/conf/machine/am62dxx-evm.conf require conf/machine/include/am62dxx.inc · line 16

Quoted 5 lines
meta-ti-bsp/conf/machine/am62dxx-evm.conf +5 -0
+    ti/k3-am62x-sk-eqep \
+    ti/k3-am62x-sk-hdmi \
+    ti/k3-am62x-sk-lpm \
+    ti/k3-am62x-sk-mcspi-loopback \
+    ti/k3-am62x-sk-pwm \

Why are these needed? Shouldn't the first removed more generic prefix cover them all?

Quoted 4 lines

Its explained in the commit message, some of the am62x-sk* overlays no longer apply to am62a or am62d. I did not go test each overlay, but for now, I removed the overlays that no longer apply to am62a/ am62d with this change

Yeah, I saw the commit message, but I understood it backwards - it sounded like the prefix functionality no longer worked with a generic prefix and you needed to list the overlays more explicitly. While in reality the generic prefix now is too broad and it picks up unneeded overlays for this platform.

Please disregard my previous question, but if you are going to re-send the patch, you might want to rephrase the commit message a bit more clearer...

Thanks!

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
meta-ti-bsp/conf/machine/am62dxx-evm.conf +1 -0
+    ti/k3-am62a7-sk-mcan.dtbo \
     ti/k3-am62a7-sk-rpi-hdr-ehrpwm \
     ti/k3-am62a7-sk-e3-max-opp \
 "
#7 lore raw
Quoted 45 lines · Denys Dmytriyenko
Quoted 39 lines · Judith Mendez

Hi Denys,

Quoted 27 lines · Denys Dmytriyenko
Quoted 26 lines · Ryan Eatmon via lists.yoctoproject.org

I assume this is for wrynose as well? If so, please make sure to add it on the subject going forward.

Quoted 20 lines · Judith Mendez

Some k3-am62x-sk* overlays no longer apply to AM62A/AM62D boards, update overlay list packaged for AM62D mostly to include the new k3-am62a7-sk-mcan.dtbo without dropping applicable overlays.

---
  meta-ti-bsp/conf/machine/am62dxx-evm.conf | 9 ++++++++-
  1 file changed, 8 insertions(+), 1 deletion(-)
meta-ti-bsp/conf/machine/am62dxx-evm.conf +2 -1
index ef9df2f7..c776ffbf 100644
@@ -7,7 +7,14 @@ require conf/machine/include/am62dxx.inc
  KERNEL_DEVICETREE_PREFIX = " \
      ti/k3-am62d2 \
      ti/k3-am62a7-sk-edgeai \
-    ti/k3-am62x-sk \
+    ti/k3-am62x-sk-csi2 \
+    ti/k3-am62x-sk-ecap-capture \
Quoted 8 lines
Quoted 5 lines

meta-ti-bsp/conf/machine/am62dxx-evm.conf require conf/machine/include/am62dxx.inc · line 16

Quoted 5 lines
meta-ti-bsp/conf/machine/am62dxx-evm.conf +5 -0
+    ti/k3-am62x-sk-eqep \
+    ti/k3-am62x-sk-hdmi \
+    ti/k3-am62x-sk-lpm \
+    ti/k3-am62x-sk-mcspi-loopback \
+    ti/k3-am62x-sk-pwm \

Why are these needed? Shouldn't the first removed more generic prefix cover them all?

Quoted 4 lines

Its explained in the commit message, some of the am62x-sk* overlays no longer apply to am62a or am62d. I did not go test each overlay, but for now, I removed the overlays that no longer apply to am62a/ am62d with this change

Quoted 8 lines

Yeah, I saw the commit message, but I understood it backwards - it sounded like the prefix functionality no longer worked with a generic prefix and you needed to list the overlays more explicitly. While in reality the generic prefix now is too broad and it picks up unneeded overlays for this platform.

Please disregard my previous question, but if you are going to re-send the patch, you might want to rephrase the commit message a bit more clearer...

Sorry denys, recieved your comment before sending out v2, if needed, i will send v3.

~ Judith

#8 lore raw
In reply to Ryan Eatmon

Hi Ryan,

Quoted 2 lines · Ryan Eatmon

I assume this is for wrynose as well?  If so, please make sure to add it on the subject going forward.

Will fix and respin

Quoted 33 lines · Judith Mendez
Quoted 29 lines

Some k3-am62x-sk* overlays no longer apply to AM62A/AM62D boards, update overlay list packaged for AM62D mostly to include the new k3-am62a7-sk-mcan.dtbo without dropping applicable overlays.

---
  meta-ti-bsp/conf/machine/am62dxx-evm.conf | 9 ++++++++-

  1 file changed, 8 insertions(+), 1 deletion(-)
meta-ti-bsp/conf/machine/am62dxx-evm.conf +8 -1
index ef9df2f7..c776ffbf 100644
@@ -7,7 +7,14 @@ require conf/machine/include/am62dxx.inc
   KERNEL_DEVICETREE_PREFIX = " \
       ti/k3-am62d2 \
       ti/k3-am62a7-sk-edgeai \
-    ti/k3-am62x-sk \
+    ti/k3-am62x-sk-csi2 \
+    ti/k3-am62x-sk-ecap-capture \
+    ti/k3-am62x-sk-eqep \
+    ti/k3-am62x-sk-hdmi \
+    ti/k3-am62x-sk-lpm \
+    ti/k3-am62x-sk-mcspi-loopback \
+    ti/k3-am62x-sk-pwm \
+    ti/k3-am62a7-sk-mcan.dtbo \
       ti/k3-am62a7-sk-rpi-hdr-ehrpwm \
       ti/k3-am62a7-sk-e3-max-opp \

  "

#9 lore raw
In reply to Judith Mendez

meta-ti / na / 20260609202801.18252-1-jm

PRC Results: PASS

=========================================================
check-yocto-patches: PASS
=========================================================
Patches
----------------------------------------
WARN - [meta-ti][master][PATCH] conf: am62dxx-evm: Fixup packaged overlay list
WARN: Commit message should not include directory path to recipe: conf: am62dxx-evm: Fixup packaged overlay list.
conf (COMMIT-MESSAGE-3)
patch

For details on the above errors/warnings visit: https://lists.yoctoproject.org/g/meta-ti/wiki/40887

=========================================================
apply-yocto-patch: PASS
=========================================================
master
=====================
Summary:
- Patch Series: [meta-ti][master][PATCH] conf: am62dxx-evm: Fixup packaged overlay list
- Submitter: From: Judith Mendez <[email protected]>
- Date: Date: Tue, 9 Jun 2026 15:28:01 -0500
- Num Patches: 1
- Mailing List (public inbox) Commit SHA: ea7759ee8759eb4fb2a8135e1212463e7417e614

Applied to:
- Repository: lcpd-prc-meta-ti
- Base Branch: master-wip
- Commit Author: Denys Dmytriyenko (TI) <[email protected]>
- Commit Subject: README: update and clean up
- Commit SHA: d942c6acc0cc38d9c0abff27dabe40e68d41f584

Patches
----------------------------------------
All patches applied

=========================================================
check-yocto-repo: PASS
=========================================================
master
=====================
PASS

=========================================================
yocto-check-layers: PASS
=========================================================
master - PASS
=====================
All checks passed