imx93: Add support for OPTEE
Subsystems (2)
v2 cover imx93: Add support for OPTEE
Changes in v2:
- Fixing build when the optee image is not present
- Link to v1: https://lore.kernel.org/all/[email protected]/
---
Krzysztof Drobiński (1):
imx93: Add support for OPTEE
Mathieu Dubois-Briand (1):
binman: Add optee binary to i.MX9 platform types
arch/arm/dts/imx93-u-boot.dtsi | 3 +++ tools/binman/etype/nxp_imx9image.py | 3 ++- 2 files changed, 5 insertions(+), 1 deletion(-)
---
base-commit: 1a8b7ad50aed5f5f0a4ccbfd455233919c097293
change-id: 20260610-mathieu-optee-fix-e60c5e725296
Best regards,
Signature · 1 line
Mathieu Dubois-Briand <[email protected]>
PATCH v2 1/2 binman: Add optee binary to i.MX9 platform types
OP-TEE tee.bin is generated externally and might be missing during the build.
--- tools/binman/etype/nxp_imx9image.py | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
tools/binman/etype/nxp_imx9image.py +2 -1
@@ -36,7 +36,8 @@ class Entry_nxp_imx9image(Entry_mkimage): 'append', 'boot-from', 'cntr-version', 'container', 'dummy-ddr', 'dummy-v2x', 'hold', 'image', 'soc-type' ] - external_files = ['oei-m33-tcm.bin', 'm33_image.bin', 'bl31.bin'] + external_files = ['oei-m33-tcm.bin', 'm33_image.bin', 'bl31.bin', + 'tee.bin'] with open(self.config_filename, 'w', encoding='utf-8') as f: for prop in self._node.props.values():
Signature · 1 line
2.47.3
PATCH v2 2/2 imx93: Add support for OPTEE
In reply to Mathieu Dubois-BriandFrom: Krzysztof Drobiński <[email protected]>
OPTEE-OS starts correctly when "opteed" is enabled for Secure Payload Dispatcher in TF-A (tested on OP-TEE version: 4.9.0), however imx93 devices require a patch for OPTEE targets because binman does not see the tee.bin file when it is available.
Enable conditional OPTEE support for imx93 devices.
--- arch/arm/dts/imx93-u-boot.dtsi | 3 +++ 1 file changed, 3 insertions(+)
arch/arm/dts/imx93-u-boot.dtsi +3 -0
@@ -69,6 +69,9 @@ container; image0 = "a55", "bl31.bin", "0x204E0000"; image1 = "a55", "u-boot.bin", "0x80200000"; +#if defined(CONFIG_OPTEE) + image2 = "a55", "tee.bin", "0x96000000"; +#endif }; }; };
Signature · 1 line
2.47.3
Quoted 5 lines · Mathieu Dubois-Briand
Changes in v2:
- Fixing build when the optee image is not present
- Link to v1: https://lore.kernel.org/all/[email protected]/Signed-off-by Mathieu Dubois-Briand <[email protected]>