media: i2c: ov02a10: fix endpoint parsing use-after-free and error leak
Subsystems (4)
PATCH 1/1 media: i2c: ov02a10: fix endpoint parsing use-after-free and error leak
The ov02a10_check_hwcfg() function calls fwnode_handle_put(ep) immediately after allocating and parsing the endpoint. However, it subsequently calls fwnode_property_read_u32() using the same 'ep' handle, leading to a potential use-after-free.
Additionally, reading the optional 'ovti,mipi-clock-voltage' property used to overwrite the 'ret' variable. If the property was missing, 'ret' would become negative, and this failure code would be incorrectly returned at the end of the function, causing probe to fail entirely.
Fix the use-after-free by moving fwnode_handle_put(ep) to the end of the endpoint property reading block, and adding it to the error path of v4l2_fwnode_endpoint_alloc_parse().
Fix the error leak by avoiding assigning the result of fwnode_property_read_u32() to 'ret'.
--- drivers/media/i2c/ov02a10.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/media/i2c/ov02a10.c +5 -2
@@ -821,9 +821,10 @@ static int ov02a10_check_hwcfg(struct device *dev, struct ov02a10 *ov02a10)return -ENXIO ; ret =v4l2_fwnode_endpoint_alloc_parse (ep, &bus_cfg); -fwnode_handle_put (ep); -if (ret) +if (ret) { +fwnode_handle_put (ep);return ret; + }/* Optional indication of MIPI clock voltage unit */ ret = fwnode_property_read_u32(ep, "ovti,mipi-clock-voltage",
@@ -832,6 +833,8 @@ static int ov02a10_check_hwcfg(struct device *dev, struct ov02a10 *ov02a10)if (!ret) ov02a10->mipi_clock_voltage = clk_volt; +fwnode_handle_put (ep); +for (i =0 ; i <ARRAY_SIZE (link_freq_menu_items); i++) {for (j =0 ; j < bus_cfg.nr_of_link_frequencies; j++) { if (link_freq_menu_items[i] ==
Signature · 1 line
2.50.1 (Apple Git-155)
Sakari Ailus
maintainerHi Biren,
Thanks for the patch.
Quoted 43 lines · Biren Pandya
The
ov02a10_check_hwcfg()function callsfwnode_handle_put(ep)immediately after allocating and parsing the endpoint. However, it subsequently callsfwnode_property_read_u32()using the same 'ep' handle, leading to a potential use-after-free.Additionally, reading the optional 'ovti,mipi-clock-voltage' property used to overwrite the 'ret' variable. If the property was missing, 'ret' would become negative, and this failure code would be incorrectly returned at the end of the function, causing probe to fail entirely.
Fix the use-after-free by moving
fwnode_handle_put(ep)to the end of the endpoint property reading block, and adding it to the error path ofv4l2_fwnode_endpoint_alloc_parse().Fix the error leak by avoiding assigning the result of
fwnode_property_read_u32()to 'ret'.Fixes cf10e09b9a4b ("media: i2c: Add OV02A10 image sensor driver")Signed-off-by Biren Pandya <[email protected]>--- drivers/media/i2c/ov02a10.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)drivers/media/i2c/ov02a10.c +3
-2@@ -821,9 +821,10 @@ static int ov02a10_check_hwcfg(struct device *dev, struct ov02a10 *ov02a10)return -ENXIO ; ret =v4l2_fwnode_endpoint_alloc_parse (ep, &bus_cfg); -fwnode_handle_put (ep); -if (ret) +if (ret) { +fwnode_handle_put (ep);return ret; + }/* Optional indication of MIPI clock voltage unit */ ret = fwnode_property_read_u32(ep, "ovti,mipi-clock-voltage",
drivers/media/i2c/ov02a10.c static int ov02a10_check_hwcfg(struct device *dev, struct ov02a10 *ov02a10) · line 840
Quoted 8 lines
drivers/media/i2c/ov02a10.c +2
-0@@ -832,6 +833,8 @@ static int ov02a10_check_hwcfg(struct device *dev, struct ov02a10 *ov02a10)if (!ret) ov02a10->mipi_clock_voltage = clk_volt; +fwnode_handle_put (ep); +for (i =0 ; i <ARRAY_SIZE (link_freq_menu_items); i++) {for (j =0 ; j < bus_cfg.nr_of_link_frequencies; j++) { if (link_freq_menu_items[i] ==
I'd fix this by moving the fwnode_property_read_u32() before finding the endpoint. That doesn't involve complicating the error handling.
Signature · 3 lines
Regards. Sakari Ailus
PATCH v4 1/1 media: i2c: ov02a10: fix endpoint parsing use-after-free
In reply to Biren PandyaThe ov02a10_check_hwcfg() function calls fwnode_handle_put(ep) immediately after allocating and parsing the endpoint. However, it subsequently calls fwnode_property_read_u32() using the same 'ep' handle, leading to a potential use-after-free.
Additionally, reading the optional 'ovti,mipi-clock-voltage' property used to overwrite the 'ret' variable. If the property was missing, 'ret' would become negative, and this failure code would be incorrectly returned at the end of the function, causing probe to fail entirely.
Fix the use-after-free by moving fwnode_property_read_u32() before the endpoint is parsed and freed. Avoid the error leak by not assigning the result of fwnode_property_read_u32() to 'ret'.
---
Changes in v4:
- Collapsed fwnode_property_read_u32() into a single line per Vladimir's review.
Changes in v3:
- Moved property reads before parse to avoid UAF.
- Fixed error leak by dropping assignment to ret.
- Added Fixes/Cc stable.
- Picked up Reviewed-by.
--- drivers/media/i2c/ov02a10.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-)
drivers/media/i2c/ov02a10.c +4 -7
@@ -820,18 +820,15 @@ static int ov02a10_check_hwcfg(struct device *dev, struct ov02a10 *ov02a10)if (!ep)return -ENXIO ; +/* Optional indication of MIPI clock voltage unit */ +if (!fwnode_property_read_u32 (ep,"ovti,mipi-clock-voltage" , &clk_volt)) + ov02a10->mipi_clock_voltage = clk_volt; + ret =v4l2_fwnode_endpoint_alloc_parse (ep, &bus_cfg);fwnode_handle_put (ep);if (ret)return ret; -/* Optional indication of MIPI clock voltage unit */ - ret =fwnode_property_read_u32 (ep,"ovti,mipi-clock-voltage" , - &clk_volt); - -if (!ret) - ov02a10->mipi_clock_voltage = clk_volt; -for (i =0 ; i <ARRAY_SIZE (link_freq_menu_items); i++) {for (j =0 ; j < bus_cfg.nr_of_link_frequencies; j++) { if (link_freq_menu_items[i] ==
Signature · 1 line
2.50.1 (Apple Git-155)
PATCH v4 1/1 media: i2c: ov02a10: fix endpoint parsing use-after-free
In reply to Biren PandyaThe ov02a10_check_hwcfg() function calls fwnode_handle_put(ep) immediately after allocating and parsing the endpoint. However, it subsequently calls fwnode_property_read_u32() using the same 'ep' handle, leading to a potential use-after-free.
Additionally, reading the optional 'ovti,mipi-clock-voltage' property used to overwrite the 'ret' variable. If the property was missing, 'ret' would become negative, and this failure code would be incorrectly returned at the end of the function, causing probe to fail entirely.
Fix the use-after-free by moving fwnode_property_read_u32() before the endpoint is parsed and freed. Avoid the error leak by not assigning the result of fwnode_property_read_u32() to 'ret'.
---
Changes in v4:
- Collapsed fwnode_property_read_u32() into a single line per Vladimir's review.
Changes in v3:
- Moved property reads before parse to avoid UAF.
- Fixed error leak by dropping assignment to ret.
- Added Fixes/Cc stable.
- Picked up Reviewed-by.
--- drivers/media/i2c/ov02a10.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-)
drivers/media/i2c/ov02a10.c +4 -7
@@ -820,18 +820,15 @@ static int ov02a10_check_hwcfg(struct device *dev, struct ov02a10 *ov02a10)if (!ep)return -ENXIO ; +/* Optional indication of MIPI clock voltage unit */ +if (!fwnode_property_read_u32 (ep,"ovti,mipi-clock-voltage" , &clk_volt)) + ov02a10->mipi_clock_voltage = clk_volt; + ret =v4l2_fwnode_endpoint_alloc_parse (ep, &bus_cfg);fwnode_handle_put (ep);if (ret)return ret; -/* Optional indication of MIPI clock voltage unit */ - ret =fwnode_property_read_u32 (ep,"ovti,mipi-clock-voltage" , - &clk_volt); - -if (!ret) - ov02a10->mipi_clock_voltage = clk_volt; -for (i =0 ; i <ARRAY_SIZE (link_freq_menu_items); i++) {for (j =0 ; j < bus_cfg.nr_of_link_frequencies; j++) { if (link_freq_menu_items[i] ==
Signature · 1 line
2.50.1 (Apple Git-155)
Re: [PATCH v4] media: i2c: ov02a10: fix endpoint parsing use-after-free
Quoted 5 lines · Biren Pandya
The
ov02a10_check_hwcfg()function callsfwnode_handle_put(ep)immediately after allocating and parsing the endpoint. However, it subsequently callsfwnode_property_read_u32()using the same 'ep' handle, leading to a potential use-after-free.
Quoted 8 lines
Additionally, reading the optional 'ovti,mipi-clock-voltage' property used to overwrite the 'ret' variable. If the property was missing, 'ret' would become negative, and this failure code would be incorrectly returned at the end of the function, causing probe to fail entirely.
Fix the use-after-free by moving
fwnode_property_read_u32()before the endpoint is parsed and freed. Avoid the error leak by not assigning the result offwnode_property_read_u32()to 'ret'.
...
Quoted 2 lines
Changes in v4:
- Collapsedfwnode_property_read_u32()into a single line per Vladimir's review.
Wasn't me?
Signature · 2 lines
With Best Regards, Andy Shevchenko