Skip to contentSkip to conversation

bnxt_en: Add kTLS TX offload support

PATCH Superseded Michael Chan 2 participants 18 messages Jun 14 – Jun 15

Subsystems (4)

v3 of 6 Superseded Latest is v6 →

lore
Share & tools
lore

Michael Chan

author maintainer
#0 lore raw

v3 cover bnxt_en: Add kTLS TX offload support

This patchset adds kTLS offload support for TX direction. A number of new files are added:

bnxt_mpc.[ch] handle midpath channels (MPCs) used to offload kTLS connections to the chip's crypto blocks without going through FW.

bnxt_crypto.[ch] handle the crypto interface and resources.

bnxt_ktls.[ch] handle kTLS offload.

A new CONFIG_BNXT_TLS is added to enable all of the above. The first 6 patches add the MPC logic including resource accounting and reservations. The next 5 patches add the crypto logic to handle the crypto resources and to send/receive control data using the MPCs. The last 4 patches add kTLS offload for the TX direction.

There will be a follow-on patchset to make the TX offload more complete and to add the RX direction offload.

v3:
Fix most AI reported issues from Jakub.

v2:
https://lore.kernel.org/netdev/[email protected]/

Fix unused variable compile warnings in patch 10 and 12 by reorganizing the patches (reported by Jakub)

Fix some error recovery issues in patch 12

v1:
https://lore.kernel.org/netdev/[email protected]/

Michael Chan (15):
bnxt_en: Add Midpath channel information
bnxt_en: Account for the MPC TX and CP rings
bnxt_en: Set default MPC ring count
bnxt_en: Rename xdp_tx_lock to tx_lock
bnxt_en: Allocate and free MPC software structures
bnxt_en: Allocate and free MPC channels from firmware
bnxt_en: Allocate crypto structure and backing store
bnxt_en: Reserve crypto RX and TX key contexts on a PF
bnxt_en: Add infrastructure for crypto key context IDs
bnxt_en: Add MPC transmit and completion functions
bnxt_en: Add crypto MPC transmit/completion infrastructure
bnxt_en: Support kTLS TX offload by implementing .tls_dev_add/del()
bnxt_en: Implement kTLS TX normal path
bnxt_en: Add support for inline transmit BDs
bnxt_en: Add kTLS retransmission support

 drivers/net/ethernet/broadcom/Kconfig         |   9 +
 drivers/net/ethernet/broadcom/bnxt/Makefile   |   1 +
 drivers/net/ethernet/broadcom/bnxt/bnxt.c     | 255 ++++++-
 drivers/net/ethernet/broadcom/bnxt/bnxt.h     |  91 ++-
 .../net/ethernet/broadcom/bnxt/bnxt_crypto.c  | 614 +++++++++++++++
 .../net/ethernet/broadcom/bnxt/bnxt_crypto.h  | 226 ++++++
 .../net/ethernet/broadcom/bnxt/bnxt_ethtool.c |  53 ++
 drivers/net/ethernet/broadcom/bnxt/bnxt_gso.c |   2 +-
 .../net/ethernet/broadcom/bnxt/bnxt_ktls.c    | 572 ++++++++++++++
 .../net/ethernet/broadcom/bnxt/bnxt_ktls.h    | 175 +++++
 drivers/net/ethernet/broadcom/bnxt/bnxt_mpc.c | 717 ++++++++++++++++++
 drivers/net/ethernet/broadcom/bnxt/bnxt_mpc.h | 210 +++++
 .../net/ethernet/broadcom/bnxt/bnxt_sriov.c   |   6 +-
 drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c |   4 +-
 include/linux/bnxt/hsi.h                      |  37 +
 15 files changed, 2918 insertions(+), 54 deletions(-)
 create mode 100644 drivers/net/ethernet/broadcom/bnxt/bnxt_crypto.c
 create mode 100644 drivers/net/ethernet/broadcom/bnxt/bnxt_crypto.h
 create mode 100644 drivers/net/ethernet/broadcom/bnxt/bnxt_ktls.c
 create mode 100644 drivers/net/ethernet/broadcom/bnxt/bnxt_ktls.h
 create mode 100644 drivers/net/ethernet/broadcom/bnxt/bnxt_mpc.c
 create mode 100644 drivers/net/ethernet/broadcom/bnxt/bnxt_mpc.h
Signature · 1 line
2.51.0
author maintainer
#1 lore raw

PATCH v3 1/15 bnxt_en: Add Midpath channel information

Midpath channels (MPCs) are rings for hardware control paths. These control paths are used to offload kTLS directly to the hardware without going through firmware. This patch adds the basic information structures for these MPCs.

An MPC is basically a TX and completion ring pair with a HW TLS block as the destination. Two MPC channel types are used to offload connections to the TX crypto engine (TCE) and the RX crypto engine (RCE) respectively. In the driver, we re-use the bnxt_tx_ring_info and bnxt_cp_ring_info control structs for the MPCs.

This patch also adds the CONFIG_BNXT_TLS Kconfig option to conditionally include the MPC logic. The first few patches in the series add the MPC support. kTLS support will be added later in the series.

---
 drivers/net/ethernet/broadcom/Kconfig         |  9 ++++
 drivers/net/ethernet/broadcom/bnxt/Makefile   |  1 +
 drivers/net/ethernet/broadcom/bnxt/bnxt.c     |  8 ++++
 drivers/net/ethernet/broadcom/bnxt/bnxt.h     |  2 +
 drivers/net/ethernet/broadcom/bnxt/bnxt_mpc.c | 26 ++++++++++
 drivers/net/ethernet/broadcom/bnxt/bnxt_mpc.h | 47 +++++++++++++++++++
 6 files changed, 93 insertions(+)
 create mode 100644 drivers/net/ethernet/broadcom/bnxt/bnxt_mpc.c
 create mode 100644 drivers/net/ethernet/broadcom/bnxt/bnxt_mpc.h
drivers/net/ethernet/broadcom/Kconfig +9 -0
index 4287edc7ddd6..0114760c3ac4 100644
@@ -254,6 +254,15 @@ config BNXT_HWMON
 	  Say Y if you want to expose the thermal sensor data on NetXtreme-C/E
 	  devices, via the hwmon sysfs interface.
 
+config BNXT_TLS
+	bool "Broadcom NetXtreme-C/E TLS offload support"
+	default y
+	depends on BNXT && TLS_DEVICE
+	depends on TLS=y || BNXT=m
+	help
+	  Say Y if you want to enable Transport Layer Security (TLS) hardware
+	  encryption and decryption offload on supported NetXtreme-C/E devices.
+
 config BNGE
 	tristate "Broadcom ThorUltra Ethernet device support"
 	depends on PCI
drivers/net/ethernet/broadcom/bnxt/Makefile +1 -0
index debef78c8b6d..0506574c007a 100644
@@ -5,3 +5,4 @@ bnxt_en-y := bnxt.o bnxt_hwrm.o bnxt_sriov.o bnxt_ethtool.o bnxt_dcb.o bnxt_ulp.
 bnxt_en-$(CONFIG_BNXT_FLOWER_OFFLOAD) += bnxt_tc.o
 bnxt_en-$(CONFIG_DEBUG_FS) += bnxt_debugfs.o
 bnxt_en-$(CONFIG_BNXT_HWMON) += bnxt_hwmon.o
+bnxt_en-$(CONFIG_BNXT_TLS) += bnxt_mpc.o
drivers/net/ethernet/broadcom/bnxt/bnxt.c +8 -0
index 1eb214e4b511..f06c6978dd71 100644
@@ -76,6 +76,7 @@
 #include "bnxt_hwmon.h"
 #include "bnxt_gso.h"
 #include <net/tso.h>
+#include "bnxt_mpc.h"
 
 #define BNXT_TX_TIMEOUT		(5 * HZ)
 #define BNXT_DEF_MSG_ENABLE	(NETIF_MSG_DRV | NETIF_MSG_HW | \
@@ -9937,6 +9938,11 @@ static int __bnxt_hwrm_func_qcaps(struct bnxt *bp)
 	}
 	bp->tso_max_segs = le16_to_cpu(resp->max_tso_segs);
 
+	if (resp->mpc_chnls_cap)
+		bnxt_alloc_mpc_info(bp, resp->mpc_chnls_cap);
+	else
+		bnxt_free_mpc_info(bp);
+
 hwrm_func_qcaps_exit:
 	hwrm_req_drop(bp, req);
 	return rc;
@@ -16495,6 +16501,7 @@ static void bnxt_remove_one(struct pci_dev *pdev)
 	bp->ptp_cfg = NULL;
 	kfree(bp->fw_health);
 	bp->fw_health = NULL;
+	bnxt_free_mpc_info(bp);
 	bnxt_cleanup_pci(bp);
 	bnxt_free_ctx_mem(bp, true);
 	bnxt_free_crash_dump_mem(bp);
@@ -17166,6 +17173,7 @@ static int bnxt_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	bnxt_ethtool_free(bp);
 	kfree(bp->fw_health);
 	bp->fw_health = NULL;
+	bnxt_free_mpc_info(bp);
 	bnxt_cleanup_pci(bp);
 	bnxt_free_ctx_mem(bp, true);
 	bnxt_free_crash_dump_mem(bp);
drivers/net/ethernet/broadcom/bnxt/bnxt.h +2 -0
index 29ff5a584d16..f8bfe1a57af0 100644
@@ -2451,6 +2451,8 @@ struct bnxt {
 
 	u8			tph_mode;
 
+	struct bnxt_mpc_info	*mpc_info;
+
 	unsigned int		current_interval;
 #define BNXT_TIMER_INTERVAL	HZ
 
drivers/net/ethernet/broadcom/bnxt/bnxt_mpc.c new file +26 -0
new file mode 100644
index 000000000000..86087e538550
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright (c) 2026 Broadcom Inc. */
+
+#include <linux/stddef.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/bnxt/hsi.h>
+
+#include "bnxt.h"
+#include "bnxt_mpc.h"
+
+void bnxt_alloc_mpc_info(struct bnxt *bp, u8 mpc_chnls_cap)
+{
+	if (!bp->mpc_info)
+		bp->mpc_info = kzalloc_obj(*bp->mpc_info);
+	if (bp->mpc_info)
+		bp->mpc_info->mpc_chnls_cap = mpc_chnls_cap;
+	else
+		netdev_warn(bp->dev, "Unable to allocate MPC info\n");
+}
+
+void bnxt_free_mpc_info(struct bnxt *bp)
+{
+	kfree(bp->mpc_info);
+	bp->mpc_info = NULL;
+}
drivers/net/ethernet/broadcom/bnxt/bnxt_mpc.h new file +47 -0

47 lines not on this page · raw message

Signature · 1 line
2.51.0
author maintainer
#2 lore raw

PATCH v3 2/15 bnxt_en: Account for the MPC TX and CP rings

In reply to Michael Chan

Modify bnxt_cp_rings_in_use(), bnxt_get_max_func_cp_rings_for_en(), and _bnxt_get_max_rings() to account for any TX rings and CP rings used by MPCs. Add a new helper bnxt_total_tx_rings() to include MPC TX rings. Ring reservations will now include the MPC rings.

---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c     | 45 ++++++++++++++-----
 drivers/net/ethernet/broadcom/bnxt/bnxt.h     |  1 +
 drivers/net/ethernet/broadcom/bnxt/bnxt_mpc.c | 21 +++++++++
 drivers/net/ethernet/broadcom/bnxt/bnxt_mpc.h | 12 +++++
 .../net/ethernet/broadcom/bnxt/bnxt_sriov.c   |  6 +--
 5 files changed, 71 insertions(+), 14 deletions(-)
drivers/net/ethernet/broadcom/bnxt/bnxt.c +34 -11
index f06c6978dd71..2ee7928ec50d 100644
@@ -7746,6 +7746,11 @@ static void bnxt_hwrm_ring_free(struct bnxt *bp, bool close_path)
 	}
 }
 
+int bnxt_total_tx_rings(struct bnxt *bp)
+{
+	return bp->tx_nr_rings + bnxt_mpc_tx_rings_in_use(bp);
+}
+
 static int __bnxt_trim_rings(struct bnxt *bp, int *rx, int *tx, int max,
 			     bool shared);
 static int bnxt_trim_rings(struct bnxt *bp, int *rx, int *tx, int max,
@@ -7786,19 +7791,28 @@ static int bnxt_hwrm_get_rings(struct bnxt *bp)
 		stats = le16_to_cpu(resp->alloc_stat_ctx);
 		hw_resc->resv_irqs = cp;
 		if (bp->flags & BNXT_FLAG_CHIP_P5_PLUS) {
+			int mpc_tx = bnxt_mpc_tx_rings_in_use(bp);
+			int mpc_cp = bnxt_mpc_cp_rings_in_use(bp);
 			int rx = hw_resc->resv_rx_rings;
 			int tx = hw_resc->resv_tx_rings;
+			int cp_p5;
 
+			if (tx <= mpc_tx || cp <= mpc_cp) {
+				rc = -ENOMEM;
+				goto get_rings_exit;
+			}
+			tx -= mpc_tx;
+			cp_p5 = cp - mpc_cp;
 			if (bp->flags & BNXT_FLAG_AGG_RINGS)
 				rx >>= 1;
-			if (cp < (rx + tx)) {
-				rc = __bnxt_trim_rings(bp, &rx, &tx, cp, false);
+			if (cp_p5 < (rx + tx)) {
+				rc = __bnxt_trim_rings(bp, &rx, &tx, cp_p5, false);
 				if (rc)
 					goto get_rings_exit;
 				if (bp->flags & BNXT_FLAG_AGG_RINGS)
 					rx <<= 1;
 				hw_resc->resv_rx_rings = rx;
-				hw_resc->resv_tx_rings = tx;
+				hw_resc->resv_tx_rings = tx + mpc_tx;
 			}
 			hw_resc->resv_irqs = le16_to_cpu(resp->alloc_msix);
 			hw_resc->resv_hw_ring_grps = rx;
@@ -7990,7 +8004,7 @@ static int bnxt_cp_rings_in_use(struct bnxt *bp)
 		return bnxt_nq_rings_in_use(bp);
 
 	cp = bp->tx_nr_rings + bp->rx_nr_rings;
-	return cp;
+	return cp + bnxt_mpc_cp_rings_in_use(bp);
 }
 
 static int bnxt_get_func_stat_ctxs(struct bnxt *bp)
@@ -8048,7 +8062,7 @@ static void bnxt_get_total_resources(struct bnxt *bp, struct bnxt_hw_rings *hwr)
 	hwr->cp_p5 = 0;
 	if (bp->flags & BNXT_FLAG_CHIP_P5_PLUS)
 		hwr->cp_p5 = bnxt_cp_rings_in_use(bp);
-	hwr->tx = bp->tx_nr_rings;
+	hwr->tx = bnxt_total_tx_rings(bp);
 	hwr->rx = bp->rx_nr_rings;
 	hwr->grp = hwr->rx;
 	hwr->vnic = bnxt_get_total_vnics(bp, hwr->rx);
@@ -8154,8 +8168,10 @@ static int __bnxt_reserve_rings(struct bnxt *bp)
 	hwr.rx = bp->rx_nr_rings;
 	if (bp->flags & BNXT_FLAG_SHARED_RINGS)
 		sh = true;
-	if (bp->flags & BNXT_FLAG_CHIP_P5_PLUS)
-		hwr.cp_p5 = hwr.rx + hwr.tx;
+	if (bp->flags & BNXT_FLAG_CHIP_P5_PLUS) {
+		hwr.cp_p5 = hwr.rx + hwr.tx + bnxt_mpc_cp_rings_in_use(bp);
+		hwr.tx += bnxt_mpc_tx_rings_in_use(bp);
+	}
 
 	hwr.vnic = bnxt_get_total_vnics(bp, hwr.rx);
 
@@ -8192,6 +8208,9 @@ static int __bnxt_reserve_rings(struct bnxt *bp)
 	if (bnxt_ulp_registered(edev) && hwr.stat > bnxt_get_ulp_stat_ctxs(bp))
 		hwr.stat -= bnxt_get_ulp_stat_ctxs(bp);
 	hwr.cp = min_t(int, hwr.cp, hwr.stat);
+	hwr.tx -= bnxt_mpc_tx_rings_in_use(bp);
+	if (hwr.tx < 0)
+		return -ENOMEM;
 	rc = bnxt_trim_rings(bp, &rx_rings, &hwr.tx, hwr.cp, sh);
 	if (bp->flags & BNXT_FLAG_AGG_RINGS)
 		hwr.rx = rx_rings << 1;
@@ -11472,12 +11491,13 @@ unsigned int bnxt_get_max_func_cp_rings(struct bnxt *bp)
 
 static unsigned int bnxt_get_max_func_cp_rings_for_en(struct bnxt *bp)
 {
+	unsigned int mpc_cp = (unsigned int)bnxt_mpc_cp_rings_in_use(bp);
 	unsigned int cp = bp->hw_resc.max_cp_rings;
 
 	if (!(bp->flags & BNXT_FLAG_CHIP_P5_PLUS))
 		cp -= bnxt_get_ulp_msix_num(bp);
 
-	return cp;
+	return mpc_cp >= cp ? 0 : cp - mpc_cp;
 }
 
 static unsigned int bnxt_get_max_func_irqs(struct bnxt *bp)
@@ -14875,8 +14895,10 @@ int bnxt_check_rings(struct bnxt *bp, int tx, int rx, bool sh, int tcs,
 		hwr.grp = rx;
 		hwr.rss_ctx = bnxt_get_total_rss_ctxs(bp, &hwr);
 	}
-	if (bp->flags & BNXT_FLAG_CHIP_P5_PLUS)
-		hwr.cp_p5 = hwr.tx + rx;
+	if (bp->flags & BNXT_FLAG_CHIP_P5_PLUS) {
+		hwr.cp_p5 = hwr.tx + rx + bnxt_mpc_cp_rings_in_use(bp);
+		hwr.tx += bnxt_mpc_tx_rings_in_use(bp);
+	}
 	rc = bnxt_hwrm_check_rings(bp, &hwr);
 	if (!rc && pci_msix_can_alloc_dyn(bp->pdev)) {
 		if (!bnxt_ulp_registered(bp->edev[BNXT_AUXDEV_RDMA])) {
@@ -16571,7 +16593,8 @@ static void _bnxt_get_max_rings(struct bnxt *bp, int *max_rx, int *max_tx,
 	struct bnxt_hw_resc *hw_resc = &bp->hw_resc;
 	int max_ring_grps = 0, max_irq;
 
-	*max_tx = hw_resc->max_tx_rings;
+	*max_tx = max(0, (int)hw_resc->max_tx_rings -
+			 bnxt_mpc_tx_rings_in_use(bp));
 	*max_rx = hw_resc->max_rx_rings;
 	*max_cp = bnxt_get_max_func_cp_rings_for_en(bp);
 	max_irq = min_t(int, bnxt_get_max_func_irqs(bp) -
drivers/net/ethernet/broadcom/bnxt/bnxt.h +1 -0
index f8bfe1a57af0..b1ef88f015d5 100644
@@ -2987,6 +2987,7 @@ int bnxt_hwrm_vnic_cfg(struct bnxt *bp, struct bnxt_vnic_info *vnic);
 int bnxt_hwrm_vnic_alloc(struct bnxt *bp, struct bnxt_vnic_info *vnic,
 			 unsigned int start_rx_ring_idx,
 			 unsigned int nr_rings);
+int bnxt_total_tx_rings(struct bnxt *bp);
 int __bnxt_hwrm_get_tx_rings(struct bnxt *bp, u16 fid, int *tx_rings);
 int bnxt_nq_rings_in_use(struct bnxt *bp);
 int bnxt_hwrm_set_coal(struct bnxt *);
drivers/net/ethernet/broadcom/bnxt/bnxt_mpc.c +21 -0
index 86087e538550..9859a5f86268 100644
@@ -24,3 +24,24 @@ void bnxt_free_mpc_info(struct bnxt *bp)
 	kfree(bp->mpc_info);
 	bp->mpc_info = NULL;
 }
+
+int bnxt_mpc_tx_rings_in_use(struct bnxt *bp)
+{
+	struct bnxt_mpc_info *mpc = bp->mpc_info;
+	int i, mpc_tx = 0;
+
+	if (!mpc)
+		return 0;
+	for (i = 0; i < BNXT_MPC_TYPE_MAX; i++)
+		mpc_tx += mpc->mpc_ring_count[i];
+	return mpc_tx;
+}
+
+int bnxt_mpc_cp_rings_in_use(struct bnxt *bp)
+{
+	struct bnxt_mpc_info *mpc = bp->mpc_info;
+
+	if (!mpc)
+		return 0;
+	return mpc->mpc_cp_rings;
+}
drivers/net/ethernet/broadcom/bnxt/bnxt_mpc.h +12 -0
index cd3f268a3a29..7a7d81197ea6 100644
@@ -35,6 +35,8 @@ struct bnxt_mpc_info {
 #ifdef CONFIG_BNXT_TLS
 void bnxt_alloc_mpc_info(struct bnxt *bp, u8 mpc_chnls_cap);
 void bnxt_free_mpc_info(struct bnxt *bp);
+int bnxt_mpc_tx_rings_in_use(struct bnxt *bp);
+int bnxt_mpc_cp_rings_in_use(struct bnxt *bp);
 #else
 static inline void bnxt_alloc_mpc_info(struct bnxt *bp, u8 mpc_chnls_cap)
 {
@@ -43,5 +45,15 @@ static inline void bnxt_alloc_mpc_info(struct bnxt *bp, u8 mpc_chnls_cap)
 static inline void bnxt_free_mpc_info(struct bnxt *bp)
 {
 }
+
+static inline int bnxt_mpc_tx_rings_in_use(struct bnxt *bp)
+{
+	return 0;
+}
+
+static inline int bnxt_mpc_cp_rings_in_use(struct bnxt *bp)
+{
+	return 0;
+}
 #endif	/* CONFIG_BNXT_TLS */
 #endif	/* BNXT_MPC_H */
drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c +3 -3
index edcc002e4ca3..d57059722f5b 100644
@@ -640,7 +640,7 @@ static int bnxt_hwrm_func_vf_resc_cfg(struct bnxt *bp, int num_vfs, bool reset)
 		vf_rx_rings = hw_resc->max_rx_rings - bp->rx_nr_rings * 2;
 	else
 		vf_rx_rings = hw_resc->max_rx_rings - bp->rx_nr_rings;
-	vf_tx_rings = hw_resc->max_tx_rings - bp->tx_nr_rings;
+	vf_tx_rings = hw_resc->max_tx_rings - bnxt_total_tx_rings(bp);
 	vf_vnics = hw_resc->max_vnics - bp->nr_vnics;
 	vf_rss = hw_resc->max_rsscos_ctxs - bp->rsscos_nr_ctxs;
 
@@ -903,8 +903,8 @@ static int bnxt_sriov_enable(struct bnxt *bp, int *num_vfs)
 		    avail_cp < min_rx_rings)
 			rx_ok = 0;
 
-		if (hw_resc->max_tx_rings - bp->tx_nr_rings >= min_tx_rings &&
-		    avail_cp >= min_tx_rings)
+		if (hw_resc->max_tx_rings - bnxt_total_tx_rings(bp) >=
+		    min_tx_rings && avail_cp >= min_tx_rings)
 			tx_ok = 1;
 
 		if (hw_resc->max_rsscos_ctxs - bp->rsscos_nr_ctxs >=
Signature · 1 line
2.51.0
author maintainer
#3 lore raw

PATCH v3 3/15 bnxt_en: Set default MPC ring count

In reply to Michael Chan

If the firmware supports MPC channels and CONFIG_BNXT_TLS is set, set the default number of MPC channels. These MPC rings will share MSIX with the TX rings. The number of MPC channels for each type must not exceed the ethtool TX channel count. bnxt_set_dflt_mpc_rings() will determine the count for each MPC channel type and it cannot be directly controlled by the user.

We also add bnxt_trim_mpc_rings() to make final adjustments in case the number of reserved TX channels is less than expected.

---
v3:
Use proper int type for min_t().

v2:
https://lore.kernel.org/netdev/[email protected]/

---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c     |  7 +++
 .../net/ethernet/broadcom/bnxt/bnxt_ethtool.c |  3 +
 drivers/net/ethernet/broadcom/bnxt/bnxt_mpc.c | 63 +++++++++++++++++++
 drivers/net/ethernet/broadcom/bnxt/bnxt_mpc.h | 15 +++++
 4 files changed, 88 insertions(+)
drivers/net/ethernet/broadcom/bnxt/bnxt.c +7 -0
index 2ee7928ec50d..3e84a92d963d 100644
@@ -13151,6 +13151,7 @@ static int __bnxt_open_nic(struct bnxt *bp, bool irq_re_init, bool link_re_init)
 		return rc;
 
 	bnxt_adj_tx_rings(bp);
+	bnxt_trim_mpc_rings(bp);
 	rc = bnxt_alloc_mem(bp, irq_re_init);
 	if (rc) {
 		netdev_err(bp->dev, "bnxt_alloc_mem err: %x\n", rc);
@@ -16691,6 +16692,7 @@ static void bnxt_trim_dflt_sh_rings(struct bnxt *bp)
 	bp->rx_nr_rings = bp->cp_nr_rings;
 	bp->tx_nr_rings_per_tc = bp->cp_nr_rings;
 	bp->tx_nr_rings = bnxt_tx_nr_rings(bp);
+	bnxt_trim_mpc_rings(bp);
 }
 
 static void bnxt_adj_dflt_rings(struct bnxt *bp, bool sh)
@@ -16742,6 +16744,8 @@ static int bnxt_set_dflt_rings(struct bnxt *bp, bool sh)
 		bnxt_set_dflt_ulp_stat_ctxs(bp);
 	}
 
+	bnxt_set_dflt_mpc_rings(bp);
+
 	rc = __bnxt_reserve_rings(bp);
 	if (rc && rc != -ENODEV)
 		netdev_warn(bp->dev, "Unable to reserve tx rings\n");
@@ -16756,6 +16760,7 @@ static int bnxt_set_dflt_rings(struct bnxt *bp, bool sh)
 		if (rc && rc != -ENODEV)
 			netdev_warn(bp->dev, "2nd rings reservation failed.\n");
 		bnxt_adj_tx_rings(bp);
+		bnxt_trim_mpc_rings(bp);
 	}
 	if (BNXT_CHIP_TYPE_NITRO_A0(bp)) {
 		bp->rx_nr_rings++;
@@ -16790,6 +16795,7 @@ static int bnxt_init_dflt_ring_mode(struct bnxt *bp)
 		goto init_dflt_ring_err;
 
 	bnxt_adj_tx_rings(bp);
+	bnxt_trim_mpc_rings(bp);
 
 	bnxt_set_dflt_rfs(bp);
 
@@ -17133,6 +17139,7 @@ static int bnxt_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	 * limited MSIX, so we re-initialize the TX rings per TC.
 	 */
 	bp->tx_nr_rings_per_tc = bp->tx_nr_rings;
+	bnxt_trim_mpc_rings(bp);
 
 	if (BNXT_PF(bp)) {
 		if (!bnxt_pf_wq) {
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c +3 -0
index 56d74a3c24b7..c60c04c34fad 100644
@@ -37,6 +37,7 @@
 #include "bnxt_nvm_defs.h"	/* NVRAM content constant and structure defs */
 #include "bnxt_fw_hdr.h"	/* Firmware hdr constant and structure defs */
 #include "bnxt_coredump.h"
+#include "bnxt_mpc.h"
 
 #define BNXT_NVM_ERR_MSG(dev, extack, msg)			\
 	do {							\
@@ -1050,6 +1051,8 @@ static int bnxt_set_channels(struct net_device *dev,
 
 	bnxt_set_cp_rings(bp, sh);
 
+	bnxt_set_dflt_mpc_rings(bp);
+
 	/* After changing number of rx channels, update NTUPLE feature. */
 	netdev_update_features(dev);
 	if (netif_running(dev)) {
drivers/net/ethernet/broadcom/bnxt/bnxt_mpc.c +63 -0

72 lines not on this page · raw message

drivers/net/ethernet/broadcom/bnxt/bnxt_mpc.h +15 -0
index 7a7d81197ea6..4ff8cad75a23 100644
@@ -17,6 +17,11 @@ enum bnxt_mpc_type {
 
 #define BNXT_MAX_MPC		8
 
+#define BNXT_MIN_MPC_TCE	1
+#define BNXT_MIN_MPC_RCE	1
+#define BNXT_DFLT_MPC_TCE	BNXT_MAX_MPC
+#define BNXT_DFLT_MPC_RCE	BNXT_MAX_MPC
+
 struct bnxt_mpc_info {
 	u8			mpc_chnls_cap;
 	u8			mpc_cp_rings;
@@ -37,6 +42,8 @@ void bnxt_alloc_mpc_info(struct bnxt *bp, u8 mpc_chnls_cap);
 void bnxt_free_mpc_info(struct bnxt *bp);
 int bnxt_mpc_tx_rings_in_use(struct bnxt *bp);
 int bnxt_mpc_cp_rings_in_use(struct bnxt *bp);
+void bnxt_trim_mpc_rings(struct bnxt *bp);
+void bnxt_set_dflt_mpc_rings(struct bnxt *bp);
 #else
 static inline void bnxt_alloc_mpc_info(struct bnxt *bp, u8 mpc_chnls_cap)
 {
@@ -55,5 +62,13 @@ static inline int bnxt_mpc_cp_rings_in_use(struct bnxt *bp)
 {
 	return 0;
 }
+
+static inline void bnxt_trim_mpc_rings(struct bnxt *bp)
+{
+}
+
+static inline void bnxt_set_dflt_mpc_rings(struct bnxt *bp)
+{
+}
 #endif	/* CONFIG_BNXT_TLS */
 #endif	/* BNXT_MPC_H */
Signature · 1 line
2.51.0
author maintainer
#4 lore raw

PATCH v3 4/15 bnxt_en: Rename xdp_tx_lock to tx_lock

In reply to Michael Chan

xdp_tx_lock in struct bnxt_tx_ring_info is used to serialize XDP_REDIRECT on the same TX ring. MPCs will also need this lock for a similar purpose to serialize sending multiple messages on the same MPC, so rename it to tx_lock.

---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c     | 2 +-
 drivers/net/ethernet/broadcom/bnxt/bnxt.h     | 4 ++--
 drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c | 4 ++--
 3 files changed, 5 insertions(+), 5 deletions(-)
drivers/net/ethernet/broadcom/bnxt/bnxt.c +1 -1
index 3e84a92d963d..5252ca1760ee 100644
@@ -4148,7 +4148,7 @@ static int bnxt_alloc_tx_rings(struct bnxt *bp)
 		}
 		qidx = bp->tc_to_qidx[j];
 		ring->queue_id = bp->q_info[qidx].queue_id;
-		spin_lock_init(&txr->xdp_tx_lock);
+		spin_lock_init(&txr->tx_lock);
 		if (i < bp->tx_nr_rings_xdp)
 			continue;
 		if (BNXT_RING_TO_TC_OFF(bp, i) == (bp->tx_nr_rings_per_tc - 1))
drivers/net/ethernet/broadcom/bnxt/bnxt.h +2 -2
index b1ef88f015d5..ce86012a9ba7 100644
@@ -1013,8 +1013,8 @@ struct bnxt_tx_ring_info {
 	u32			dev_state;
 
 	struct bnxt_ring_struct	tx_ring_struct;
-	/* Synchronize simultaneous xdp_xmit on same ring */
-	spinlock_t		xdp_tx_lock;
+	/* Synchronize simultaneous xdp_xmit on same ring or for MPC ring */
+	spinlock_t		tx_lock;
 };
 
 #define BNXT_LEGACY_COAL_CMPL_PARAMS					\
drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c +2 -2
index 9e5009be8e98..2a94a77847fe 100644
@@ -351,7 +351,7 @@ int bnxt_xdp_xmit(struct net_device *dev, int num_frames,
 		return -EINVAL;
 
 	if (static_branch_unlikely(&bnxt_xdp_locking_key))
-		spin_lock(&txr->xdp_tx_lock);
+		spin_lock(&txr->tx_lock);
 
 	for (i = 0; i < num_frames; i++) {
 		struct xdp_frame *xdp = frames[i];
@@ -376,7 +376,7 @@ int bnxt_xdp_xmit(struct net_device *dev, int num_frames,
 	}
 
 	if (static_branch_unlikely(&bnxt_xdp_locking_key))
-		spin_unlock(&txr->xdp_tx_lock);
+		spin_unlock(&txr->tx_lock);
 
 	return nxmit;
 }
Signature · 1 line
2.51.0
author maintainer
#5 lore raw

PATCH v3 5/15 bnxt_en: Allocate and free MPC software structures

In reply to Michael Chan

Each MPC consists of a special TX ring and a completion ring. Use existing structs bnxt_tx_ring_info and bnxt_cp_ring_info as control structures. The 2 MPC channels to TCE and RCE that share the MSIX will use a shared completion ring.

---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c     |  35 ++-
 drivers/net/ethernet/broadcom/bnxt/bnxt.h     |  12 +-
 drivers/net/ethernet/broadcom/bnxt/bnxt_mpc.c | 205 ++++++++++++++++++
 drivers/net/ethernet/broadcom/bnxt/bnxt_mpc.h |  46 ++++
 4 files changed, 291 insertions(+), 7 deletions(-)
drivers/net/ethernet/broadcom/bnxt/bnxt.c +29 -6
index 5252ca1760ee..ffedb9ee0454 100644
@@ -3679,7 +3679,7 @@ static size_t __bnxt_copy_ring(struct bnxt *bp, struct bnxt_ring_mem_info *rmem,
 	return total_len;
 }
 
-static void bnxt_free_ring(struct bnxt *bp, struct bnxt_ring_mem_info *rmem)
+void bnxt_free_ring(struct bnxt *bp, struct bnxt_ring_mem_info *rmem)
 {
 	struct pci_dev *pdev = bp->pdev;
 	int i;
@@ -3712,7 +3712,7 @@ static void bnxt_free_ring(struct bnxt *bp, struct bnxt_ring_mem_info *rmem)
 	}
 }
 
-static int bnxt_alloc_ring(struct bnxt *bp, struct bnxt_ring_mem_info *rmem)
+int bnxt_alloc_ring(struct bnxt *bp, struct bnxt_ring_mem_info *rmem)
 {
 	struct pci_dev *pdev = bp->pdev;
 	u64 valid_bit = 0;
@@ -4319,6 +4319,8 @@ static int bnxt_alloc_cp_rings(struct bnxt *bp)
 			 (!sh && i >= bp->rx_nr_rings)) {
 			cp_count += tcs;
 			tx = 1;
+			if (bnxt_napi_has_mpc(bp, i))
+				cp_count++;
 		}
 
 		cpr->cp_ring_arr = kzalloc_objs(*cpr, cp_count);
@@ -4340,6 +4342,11 @@ static int bnxt_alloc_cp_rings(struct bnxt *bp)
 			} else {
 				int n, tc = k - rx;
 
+				/* MPC rings are at the highest k indices */
+				if (tc >= tcs) {
+					bnxt_set_mpc_cp_ring(bp, i, cpr2);
+					continue;
+				}
 				n = BNXT_TC_TO_RING_BASE(bp, tc) + j;
 				bp->tx_ring[n].tx_cpr = cpr2;
 				cpr2->cp_ring_type = BNXT_NQ_HDL_TYPE_TX;
@@ -4472,6 +4479,7 @@ static void bnxt_init_ring_struct(struct bnxt *bp)
 			rmem->vmem = (void **)&txr->tx_buf_ring;
 		}
 	}
+	bnxt_init_mpc_ring_struct(bp);
 }
 
 static void bnxt_init_rxbd_pages(struct bnxt_ring_struct *ring, u32 type)
@@ -5548,6 +5556,7 @@ static void bnxt_init_l2_fltr_tbl(struct bnxt *bp)
 static void bnxt_free_mem(struct bnxt *bp, bool irq_re_init)
 {
 	bnxt_free_vnic_attributes(bp);
+	bnxt_free_mpc_rings(bp);
 	bnxt_free_tx_rings(bp);
 	bnxt_free_rx_rings(bp);
 	bnxt_free_cp_rings(bp);
@@ -5561,6 +5570,7 @@ static void bnxt_free_mem(struct bnxt *bp, bool irq_re_init)
 			bnxt_free_port_stats(bp);
 		bnxt_free_ring_grps(bp);
 		bnxt_free_vnics(bp);
+		bnxt_free_mpcs(bp);
 		kfree(bp->tx_ring_map);
 		bp->tx_ring_map = NULL;
 		kfree(bp->tx_ring);
@@ -5670,6 +5680,10 @@ static int bnxt_alloc_mem(struct bnxt *bp, bool irq_re_init)
 				txr->tx_cpr = &bnapi2->cp_ring;
 		}
 
+		rc = bnxt_alloc_mpcs(bp);
+		if (rc)
+			goto alloc_mem_err;
+
 		rc = bnxt_alloc_stats(bp);
 		if (rc)
 			goto alloc_mem_err;
@@ -5698,6 +5712,10 @@ static int bnxt_alloc_mem(struct bnxt *bp, bool irq_re_init)
 	if (rc)
 		goto alloc_mem_err;
 
+	rc = bnxt_alloc_mpc_rings(bp);
+	if (rc)
+		goto alloc_mem_err;
+
 	rc = bnxt_alloc_cp_rings(bp);
 	if (rc)
 		goto alloc_mem_err;
@@ -7252,10 +7270,15 @@ static int hwrm_ring_alloc_send_msg(struct bnxt *bp,
 		req->cmpl_ring_id = cpu_to_le16(bnxt_cp_ring_for_tx(bp, txr));
 		req->length = cpu_to_le32(bp->tx_ring_mask + 1);
 		req->stat_ctx_id = cpu_to_le32(grp_info->fw_stats_ctx);
-		req->queue_id = cpu_to_le16(ring->queue_id);
-		if (bp->flags & BNXT_FLAG_TX_COAL_CMPL)
-			req->cmpl_coal_cnt =
-				RING_ALLOC_REQ_CMPL_COAL_CNT_COAL_64;
+		if (ring->queue_id == BNXT_MPC_QUEUE_ID) {
+			req->mpc_chnls_type = ring->mpc_chnl_type;
+			req->enables |= cpu_to_le32(RING_ALLOC_REQ_ENABLES_MPC_CHNLS_TYPE);
+		} else {
+			req->queue_id = cpu_to_le16(ring->queue_id);
+			if (bp->flags & BNXT_FLAG_TX_COAL_CMPL)
+				req->cmpl_coal_cnt =
+					RING_ALLOC_REQ_CMPL_COAL_CNT_COAL_64;
+		}
 		if ((bp->fw_cap & BNXT_FW_CAP_TX_TS_CMP) && bp->ptp_cfg)
 			flags |= RING_ALLOC_REQ_FLAGS_TX_PKT_TS_CMPL_ENABLE;
 		req->flags = cpu_to_le16(flags);
drivers/net/ethernet/broadcom/bnxt/bnxt.h +11 -1
index ce86012a9ba7..083b95dcfd73 100644
@@ -686,6 +686,7 @@ struct nqe_cn {
 #define BNXT_NQ_HDL_TYPE_SHIFT	24
 #define BNXT_NQ_HDL_TYPE_RX	0x00
 #define BNXT_NQ_HDL_TYPE_TX	0x01
+#define BNXT_NQ_HDL_TYPE_MP	0x02
 
 #define BNXT_NQ_HDL_IDX(hdl)	((hdl) & BNXT_NQ_HDL_IDX_MASK)
 #define BNXT_NQ_HDL_TYPE(hdl)	(((hdl) & BNXT_NQ_HDL_TYPE_MASK) >>	\
@@ -950,6 +951,8 @@ struct bnxt_ring_struct {
 	};
 	u32			handle;
 	u8			queue_id;
+#define BNXT_MPC_QUEUE_ID	0xff
+	u8			mpc_chnl_type;
 };
 
 struct tx_push_bd {
@@ -990,12 +993,16 @@ struct bnxt_tx_ring_info {
 	u16			tx_cons;
 	u16			tx_hw_cons;
 	u16			txq_index;
+	/* index for tx_ring[] or tx_mpc_ring[] in struct bnxt_napi */
 	u8			tx_napi_idx;
 	u8			kick_pending;
 	struct bnxt_db_info	tx_db;
 
 	struct tx_bd		*tx_desc_ring[MAX_TX_PAGES];
-	struct bnxt_sw_tx_bd	*tx_buf_ring;
+	union {
+		struct bnxt_sw_tx_bd	*tx_buf_ring;
+		struct bnxt_sw_mpc_tx_bd	*tx_mpc_buf_ring;
+	};
 
 	dma_addr_t		tx_desc_mapping[MAX_TX_PAGES];
 
@@ -1241,6 +1248,7 @@ struct bnxt_napi {
 	struct bnxt_cp_ring_info	cp_ring;
 	struct bnxt_rx_ring_info	*rx_ring;
 	struct bnxt_tx_ring_info	*tx_ring[BNXT_MAX_TXR_PER_NAPI];
+	struct bnxt_tx_ring_info	**tx_mpc_ring;
 
 	void			(*tx_int)(struct bnxt *, struct bnxt_napi *,
 					  int budget);
@@ -2959,6 +2967,8 @@ int bnxt_alloc_rx_data(struct bnxt *bp, struct bnxt_rx_ring_info *rxr,
 void bnxt_reuse_rx_data(struct bnxt_rx_ring_info *rxr, u16 cons, void *data);
 u32 bnxt_fw_health_readl(struct bnxt *bp, int reg_idx);
 bool bnxt_bs_trace_avail(struct bnxt *bp, u16 type);
+void bnxt_free_ring(struct bnxt *bp, struct bnxt_ring_mem_info *rmem);
+int bnxt_alloc_ring(struct bnxt *bp, struct bnxt_ring_mem_info *rmem);
 void bnxt_set_tpa_flags(struct bnxt *bp);
 void bnxt_set_ring_params(struct bnxt *);
 void bnxt_set_rx_skb_mode(struct bnxt *bp, bool page_mode);
drivers/net/ethernet/broadcom/bnxt/bnxt_mpc.c +205 -0

220 lines not on this page · raw message

drivers/net/ethernet/broadcom/bnxt/bnxt_mpc.h +46 -0

71 lines not on this page · raw message

Signature · 1 line
2.51.0
author maintainer
#6 lore raw

PATCH v3 6/15 bnxt_en: Allocate and free MPC channels from firmware

In reply to Michael Chan

Allocate and free the reserved MPC TX rings and completion rings from firmware. MPC backing store memory also needs to be configured in order to successfully allocate the MPC TX rings.

---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c     | 30 ++++--
 drivers/net/ethernet/broadcom/bnxt/bnxt.h     |  6 ++
 drivers/net/ethernet/broadcom/bnxt/bnxt_mpc.c | 92 +++++++++++++++++++
 drivers/net/ethernet/broadcom/bnxt/bnxt_mpc.h | 16 ++++
 4 files changed, 135 insertions(+), 9 deletions(-)
drivers/net/ethernet/broadcom/bnxt/bnxt.c +21 -9
index ffedb9ee0454..0d6d4bb7fd6f 100644
@@ -7473,8 +7473,7 @@ static int bnxt_hwrm_rx_agg_ring_alloc(struct bnxt *bp,
 	return 0;
 }
 
-static int bnxt_hwrm_cp_ring_alloc_p5(struct bnxt *bp,
-				      struct bnxt_cp_ring_info *cpr)
+int bnxt_hwrm_cp_ring_alloc_p5(struct bnxt *bp, struct bnxt_cp_ring_info *cpr)
 {
 	const u32 type = HWRM_RING_ALLOC_CMPL;
 	struct bnxt_napi *bnapi = cpr->bnapi;
@@ -7492,8 +7491,8 @@ static int bnxt_hwrm_cp_ring_alloc_p5(struct bnxt *bp,
 	return 0;
 }
 
-static int bnxt_hwrm_tx_ring_alloc(struct bnxt *bp,
-				   struct bnxt_tx_ring_info *txr, u32 tx_idx)
+int bnxt_hwrm_tx_ring_alloc(struct bnxt *bp, struct bnxt_tx_ring_info *txr,
+			    u32 tx_idx)
 {
 	struct bnxt_ring_struct *ring = &txr->tx_ring_struct;
 	const u32 type = HWRM_RING_ALLOC_TX;
@@ -7578,6 +7577,9 @@ static int bnxt_hwrm_ring_alloc(struct bnxt *bp)
 				goto err_out;
 		}
 	}
+
+	rc = bnxt_hwrm_mpc_ring_alloc(bp);
+
 err_out:
 	return rc;
 }
@@ -7635,9 +7637,8 @@ static int hwrm_ring_free_send_msg(struct bnxt *bp,
 	return 0;
 }
 
-static void bnxt_hwrm_tx_ring_free(struct bnxt *bp,
-				   struct bnxt_tx_ring_info *txr,
-				   bool close_path)
+void bnxt_hwrm_tx_ring_free(struct bnxt *bp, struct bnxt_tx_ring_info *txr,
+			    bool close_path)
 {
 	struct bnxt_ring_struct *ring = &txr->tx_ring_struct;
 	u32 cmpl_ring_id;
@@ -7696,8 +7697,7 @@ static void bnxt_hwrm_rx_agg_ring_free(struct bnxt *bp,
 	bp->grp_info[grp_idx].agg_fw_ring_id = INVALID_HW_RING_ID;
 }
 
-static void bnxt_hwrm_cp_ring_free(struct bnxt *bp,
-				   struct bnxt_cp_ring_info *cpr)
+void bnxt_hwrm_cp_ring_free(struct bnxt *bp, struct bnxt_cp_ring_info *cpr)
 {
 	struct bnxt_ring_struct *ring;
 
@@ -7731,6 +7731,8 @@ static void bnxt_hwrm_ring_free(struct bnxt *bp, bool close_path)
 	if (!bp->bnapi)
 		return;
 
+	bnxt_hwrm_mpc_ring_free(bp, close_path);
+
 	for (i = 0; i < bp->tx_nr_rings; i++)
 		bnxt_hwrm_tx_ring_free(bp, &bp->tx_ring[i], close_path);
 
@@ -9368,12 +9370,21 @@ static int bnxt_hwrm_func_backing_store_cfg_v2(struct bnxt *bp,
 
 static int bnxt_backing_store_cfg_v2(struct bnxt *bp)
 {
+	struct bnxt_mpc_info *mpc = bp->mpc_info;
 	struct bnxt_ctx_mem_info *ctx = bp->ctx;
 	struct bnxt_ctx_mem_type *ctxm;
 	u16 last_type = BNXT_CTX_INV;
 	int rc = 0;
 	u16 type;
 
+	if (mpc && mpc->mpc_chnls_cap) {
+		ctxm = &ctx->ctx_arr[BNXT_CTX_MTQM];
+		rc = bnxt_setup_ctxm_pg_tbls(bp, ctxm, ctxm->max_entries, 1);
+		if (rc)
+			return rc;
+		last_type = BNXT_CTX_MTQM;
+	}
+
 	for (type = BNXT_CTX_SRT; type <= BNXT_CTX_QPC; type++) {
 		ctxm = &ctx->ctx_arr[type];
 		if (!bnxt_bs_trace_avail(bp, type))
@@ -11324,6 +11335,7 @@ static int bnxt_init_nic(struct bnxt *bp, bool irq_re_init)
 	bnxt_init_cp_rings(bp);
 	bnxt_init_rx_rings(bp);
 	bnxt_init_tx_rings(bp);
+	bnxt_init_mpc_rings(bp);
 	bnxt_init_ring_grps(bp, irq_re_init);
 	bnxt_init_vnics(bp);
 
drivers/net/ethernet/broadcom/bnxt/bnxt.h +6 -0
index 083b95dcfd73..f875f130f070 100644
@@ -2997,6 +2997,12 @@ int bnxt_hwrm_vnic_cfg(struct bnxt *bp, struct bnxt_vnic_info *vnic);
 int bnxt_hwrm_vnic_alloc(struct bnxt *bp, struct bnxt_vnic_info *vnic,
 			 unsigned int start_rx_ring_idx,
 			 unsigned int nr_rings);
+int bnxt_hwrm_cp_ring_alloc_p5(struct bnxt *bp, struct bnxt_cp_ring_info *cpr);
+int bnxt_hwrm_tx_ring_alloc(struct bnxt *bp, struct bnxt_tx_ring_info *txr,
+			    u32 tx_idx);
+void bnxt_hwrm_tx_ring_free(struct bnxt *bp, struct bnxt_tx_ring_info *txr,
+			    bool close_path);
+void bnxt_hwrm_cp_ring_free(struct bnxt *bp, struct bnxt_cp_ring_info *cpr);
 int bnxt_total_tx_rings(struct bnxt *bp);
 int __bnxt_hwrm_get_tx_rings(struct bnxt *bp, u16 fid, int *tx_rings);
 int bnxt_nq_rings_in_use(struct bnxt *bp);
drivers/net/ethernet/broadcom/bnxt/bnxt_mpc.c +92 -0

95 lines not on this page · raw message

drivers/net/ethernet/broadcom/bnxt/bnxt_mpc.h +16 -0
index b54daf4ddd2f..cdc03a074963 100644
@@ -58,6 +58,9 @@ int bnxt_alloc_mpcs(struct bnxt *bp);
 void bnxt_free_mpcs(struct bnxt *bp);
 int bnxt_alloc_mpc_rings(struct bnxt *bp);
 void bnxt_free_mpc_rings(struct bnxt *bp);
+void bnxt_init_mpc_rings(struct bnxt *bp);
+int bnxt_hwrm_mpc_ring_alloc(struct bnxt *bp);
+void bnxt_hwrm_mpc_ring_free(struct bnxt *bp, bool close_path);
 #else
 static inline void bnxt_alloc_mpc_info(struct bnxt *bp, u8 mpc_chnls_cap)
 {
@@ -116,5 +119,18 @@ static inline int bnxt_alloc_mpc_rings(struct bnxt *bp)
 static inline void bnxt_free_mpc_rings(struct bnxt *bp)
 {
 }
+
+static inline void bnxt_init_mpc_rings(struct bnxt *bp)
+{
+}
+
+static inline int bnxt_hwrm_mpc_ring_alloc(struct bnxt *bp)
+{
+	return 0;
+}
+
+static inline void bnxt_hwrm_mpc_ring_free(struct bnxt *bp, bool close_path)
+{
+}
 #endif	/* CONFIG_BNXT_TLS */
 #endif	/* BNXT_MPC_H */
Signature · 1 line
2.51.0
author maintainer
#7 lore raw

PATCH v3 7/15 bnxt_en: Allocate crypto structure and backing store

In reply to Michael Chan

If the chip and firmware support crypto (TLS) offload, allocate a bp->crypto_info software structure and backing store to support the RX and TX contexts. Each offloaded TLS connection requires a backing store context for each direction.

bp->crypto_info will stay persistent even if kTLS is no longer supported after a FW reset. This makes it easier to avoid NULL dereference of bp->crypto_info during FW reset and kTLS offload race conditions.

---
v3:
bp->crypto_info and bp->ktls_info now stay persistent for the driver's lifetime. max keys are refreshed after re-init.

v2:
https://lore.kernel.org/netdev/[email protected]/

---
 drivers/net/ethernet/broadcom/bnxt/Makefile   |  2 +-
 drivers/net/ethernet/broadcom/bnxt/bnxt.c     | 21 +++++
 drivers/net/ethernet/broadcom/bnxt/bnxt.h     |  4 +
 .../net/ethernet/broadcom/bnxt/bnxt_crypto.c  | 82 +++++++++++++++++++
 .../net/ethernet/broadcom/bnxt/bnxt_crypto.h  | 47 +++++++++++
 include/linux/bnxt/hsi.h                      | 37 +++++++++
 6 files changed, 192 insertions(+), 1 deletion(-)
 create mode 100644 drivers/net/ethernet/broadcom/bnxt/bnxt_crypto.c
 create mode 100644 drivers/net/ethernet/broadcom/bnxt/bnxt_crypto.h
drivers/net/ethernet/broadcom/bnxt/Makefile +1 -1
index 0506574c007a..3acdb81fa958 100644
@@ -5,4 +5,4 @@ bnxt_en-y := bnxt.o bnxt_hwrm.o bnxt_sriov.o bnxt_ethtool.o bnxt_dcb.o bnxt_ulp.
 bnxt_en-$(CONFIG_BNXT_FLOWER_OFFLOAD) += bnxt_tc.o
 bnxt_en-$(CONFIG_DEBUG_FS) += bnxt_debugfs.o
 bnxt_en-$(CONFIG_BNXT_HWMON) += bnxt_hwmon.o
-bnxt_en-$(CONFIG_BNXT_TLS) += bnxt_mpc.o
+bnxt_en-$(CONFIG_BNXT_TLS) += bnxt_mpc.o bnxt_crypto.o
drivers/net/ethernet/broadcom/bnxt/bnxt.c +21 -0
index 0d6d4bb7fd6f..dd8b3e09fd2d 100644
@@ -77,6 +77,7 @@
 #include "bnxt_gso.h"
 #include <net/tso.h>
 #include "bnxt_mpc.h"
+#include "bnxt_crypto.h"
 
 #define BNXT_TX_TIMEOUT		(5 * HZ)
 #define BNXT_DEF_MSG_ENABLE	(NETIF_MSG_DRV | NETIF_MSG_HW | \
@@ -9370,6 +9371,7 @@ static int bnxt_hwrm_func_backing_store_cfg_v2(struct bnxt *bp,
 
 static int bnxt_backing_store_cfg_v2(struct bnxt *bp)
 {
+	struct bnxt_crypto_info *crypto = bp->crypto_info;
 	struct bnxt_mpc_info *mpc = bp->mpc_info;
 	struct bnxt_ctx_mem_info *ctx = bp->ctx;
 	struct bnxt_ctx_mem_type *ctxm;
@@ -9377,6 +9379,19 @@ static int bnxt_backing_store_cfg_v2(struct bnxt *bp)
 	int rc = 0;
 	u16 type;
 
+	if (BNXT_SUPPORTS_KTLS(bp)) {
+		ctxm = &ctx->ctx_arr[BNXT_CTX_TCK];
+		rc = bnxt_setup_ctxm_pg_tbls(bp, ctxm,
+					     BNXT_TCK(crypto).max_ctx, 1);
+		if (rc)
+			return rc;
+		ctxm = &ctx->ctx_arr[BNXT_CTX_RCK];
+		rc = bnxt_setup_ctxm_pg_tbls(bp, ctxm,
+					     BNXT_RCK(crypto).max_ctx, 1);
+		if (rc)
+			return rc;
+		last_type = BNXT_CTX_RCK;
+	}
 	if (mpc && mpc->mpc_chnls_cap) {
 		ctxm = &ctx->ctx_arr[BNXT_CTX_MTQM];
 		rc = bnxt_setup_ctxm_pg_tbls(bp, ctxm, ctxm->max_entries, 1);
@@ -9919,6 +9934,10 @@ static int __bnxt_hwrm_func_qcaps(struct bnxt *bp)
 		bp->fw_cap |= BNXT_FW_CAP_BACKING_STORE_V2;
 	if (flags_ext & FUNC_QCAPS_RESP_FLAGS_EXT_TX_COAL_CMPL_CAP)
 		bp->flags |= BNXT_FLAG_TX_COAL_CMPL;
+	if (flags_ext & FUNC_QCAPS_RESP_FLAGS_EXT_KTLS_SUPPORTED)
+		bnxt_alloc_crypto_info(bp, resp);
+	else
+		bp->fw_cap &= ~BNXT_FW_CAP_KTLS;
 
 	flags_ext2 = le32_to_cpu(resp->flags_ext2);
 	if (flags_ext2 & FUNC_QCAPS_RESP_FLAGS_EXT2_RX_ALL_PKTS_TIMESTAMPS_SUPPORTED)
@@ -16559,6 +16578,7 @@ static void bnxt_remove_one(struct pci_dev *pdev)
 	bp->ptp_cfg = NULL;
 	kfree(bp->fw_health);
 	bp->fw_health = NULL;
+	bnxt_free_crypto_info(bp);
 	bnxt_free_mpc_info(bp);
 	bnxt_cleanup_pci(bp);
 	bnxt_free_ctx_mem(bp, true);
@@ -17238,6 +17258,7 @@ static int bnxt_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	bnxt_ethtool_free(bp);
 	kfree(bp->fw_health);
 	bp->fw_health = NULL;
+	bnxt_free_crypto_info(bp);
 	bnxt_free_mpc_info(bp);
 	bnxt_cleanup_pci(bp);
 	bnxt_free_ctx_mem(bp, true);
drivers/net/ethernet/broadcom/bnxt/bnxt.h +4 -0
index f875f130f070..954c679e0290 100644
@@ -2460,6 +2460,7 @@ struct bnxt {
 	u8			tph_mode;
 
 	struct bnxt_mpc_info	*mpc_info;
+	struct bnxt_crypto_info	*crypto_info;
 
 	unsigned int		current_interval;
 #define BNXT_TIMER_INTERVAL	HZ
@@ -2547,6 +2548,7 @@ struct bnxt {
 	#define BNXT_FW_CAP_NPAR_1_2			BIT_ULL(42)
 	#define BNXT_FW_CAP_MIRROR_ON_ROCE		BIT_ULL(43)
 	#define BNXT_FW_CAP_PTP_PTM			BIT_ULL(44)
+	#define BNXT_FW_CAP_KTLS			BIT_ULL(45)
 
 	u32			fw_dbg_cap;
 
@@ -2572,6 +2574,8 @@ struct bnxt {
 	((bp)->fw_cap & BNXT_FW_CAP_SW_MAX_RESOURCE_LIMITS)
 #define BNXT_MIRROR_ON_ROCE_CAP(bp)	\
 	((bp)->fw_cap & BNXT_FW_CAP_MIRROR_ON_ROCE)
+#define BNXT_SUPPORTS_KTLS(bp)	\
+	((bp)->fw_cap & BNXT_FW_CAP_KTLS)
 
 	u32			hwrm_spec_code;
 	u16			hwrm_cmd_seq;
drivers/net/ethernet/broadcom/bnxt/bnxt_crypto.c new file +82 -0

82 lines not on this page · raw message

drivers/net/ethernet/broadcom/bnxt/bnxt_crypto.h new file +47 -0

47 lines not on this page · raw message

include/linux/bnxt/hsi.h +37 -0
index 74a6bf278d88..03444b81beb0 100644
@@ -3837,6 +3837,43 @@ struct hwrm_func_ptp_ext_qcfg_output {
 	u8	valid;
 };
 
+/* hwrm_func_key_ctx_alloc_input (size:384b/48B) */
+struct hwrm_func_key_ctx_alloc_input {
+	__le16	req_type;
+	__le16	cmpl_ring;
+	__le16	seq_id;
+	__le16	target_id;
+	__le64	resp_addr;
+	__le16	fid;
+	__le16	num_key_ctxs;
+	__le32	dma_bufr_size_bytes;
+	u8	key_ctx_type;
+	#define FUNC_KEY_CTX_ALLOC_REQ_KEY_CTX_TYPE_TX      0x0UL
+	#define FUNC_KEY_CTX_ALLOC_REQ_KEY_CTX_TYPE_RX      0x1UL
+	#define FUNC_KEY_CTX_ALLOC_REQ_KEY_CTX_TYPE_QUIC_TX 0x2UL
+	#define FUNC_KEY_CTX_ALLOC_REQ_KEY_CTX_TYPE_QUIC_RX 0x3UL
+	#define FUNC_KEY_CTX_ALLOC_REQ_KEY_CTX_TYPE_LAST   FUNC_KEY_CTX_ALLOC_REQ_KEY_CTX_TYPE_QUIC_RX
+	u8	unused_0[7];
+	__le64	host_dma_addr;
+	__le32	partition_start_xid;
+	u8	unused_1[4];
+};
+
+/* hwrm_func_key_ctx_alloc_output (size:192b/24B) */
+struct hwrm_func_key_ctx_alloc_output {
+	__le16	error_code;
+	__le16	req_type;
+	__le16	seq_id;
+	__le16	resp_len;
+	__le16	num_key_ctxs_allocated;
+	u8	flags;
+	#define FUNC_KEY_CTX_ALLOC_RESP_FLAGS_KEY_CTXS_CONTIGUOUS     0x1UL
+	u8	unused_0;
+	__le32	partition_start_xid;
+	u8	unused_1[7];
+	u8	valid;
+};
+
 /* hwrm_func_backing_store_cfg_v2_input (size:512b/64B) */
 struct hwrm_func_backing_store_cfg_v2_input {
 	__le16	req_type;
Signature · 1 line
2.51.0
author maintainer
#8 lore raw

PATCH v3 8/15 bnxt_en: Reserve crypto RX and TX key contexts on a PF

In reply to Michael Chan

If kTLS crypto offload is supported, reserve RX and TX key contexts. These keys will later be allocated during run-time to support offloading TX and RX kTLS connections.

---
v3:
Add missing ASSETS_TEST flag when checking reserved crypto keys.

v2:
https://lore.kernel.org/netdev/[email protected]/

---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c     | 22 +++++++++++--
 drivers/net/ethernet/broadcom/bnxt/bnxt.h     | 11 +++++++
 .../net/ethernet/broadcom/bnxt/bnxt_crypto.c  | 32 +++++++++++++++++++
 .../net/ethernet/broadcom/bnxt/bnxt_crypto.h  |  7 ++++
 4 files changed, 70 insertions(+), 2 deletions(-)
drivers/net/ethernet/broadcom/bnxt/bnxt.c +20 -2
index dd8b3e09fd2d..730af6aee0c8 100644
@@ -7785,6 +7785,7 @@ static int bnxt_trim_rings(struct bnxt *bp, int *rx, int *tx, int max,
 static int bnxt_hwrm_get_rings(struct bnxt *bp)
 {
 	struct bnxt_hw_resc *hw_resc = &bp->hw_resc;
+	struct bnxt_hw_crypto_resc *crypto_resc;
 	struct hwrm_func_qcfg_output *resp;
 	struct hwrm_func_qcfg_input *req;
 	int rc;
@@ -7845,6 +7846,10 @@ static int bnxt_hwrm_get_rings(struct bnxt *bp)
 		}
 		hw_resc->resv_cp_rings = cp;
 		hw_resc->resv_stat_ctxs = stats;
+
+		crypto_resc = &hw_resc->crypto_resc;
+		crypto_resc->resv_tx_key_ctxs = le32_to_cpu(resp->num_ktls_tx_key_ctxs);
+		crypto_resc->resv_rx_key_ctxs = le32_to_cpu(resp->num_ktls_rx_key_ctxs);
 	}
 get_rings_exit:
 	hwrm_req_drop(bp, req);
@@ -7915,8 +7920,9 @@ __bnxt_hwrm_reserve_pf_rings(struct bnxt *bp, struct bnxt_hw_rings *hwr)
 		}
 		req->num_stat_ctxs = cpu_to_le16(hwr->stat);
 		req->num_vnics = cpu_to_le16(hwr->vnic);
+		bnxt_hwrm_reserve_pf_key_ctxs(bp, req);
 	}
-	req->enables = cpu_to_le32(enables);
+	req->enables |= cpu_to_le32(enables);
 	return req;
 }
 
@@ -8318,7 +8324,7 @@ static int bnxt_hwrm_check_vf_rings(struct bnxt *bp, struct bnxt_hw_rings *hwr)
 static int bnxt_hwrm_check_pf_rings(struct bnxt *bp, struct bnxt_hw_rings *hwr)
 {
 	struct hwrm_func_cfg_input *req;
-	u32 flags;
+	u32 flags, flags2 = 0;
 
 	req = __bnxt_hwrm_reserve_pf_rings(bp, hwr);
 	flags = FUNC_CFG_REQ_FLAGS_TX_ASSETS_TEST;
@@ -8332,9 +8338,14 @@ static int bnxt_hwrm_check_pf_rings(struct bnxt *bp, struct bnxt_hw_rings *hwr)
 				 FUNC_CFG_REQ_FLAGS_NQ_ASSETS_TEST;
 		else
 			flags |= FUNC_CFG_REQ_FLAGS_RING_GRP_ASSETS_TEST;
+		if (req->enables &
+		    cpu_to_le32(FUNC_CFG_REQ_ENABLES_KTLS_TX_KEY_CTXS |
+				FUNC_CFG_REQ_ENABLES_KTLS_RX_KEY_CTXS))
+			flags2 |= FUNC_CFG_REQ_FLAGS2_KTLS_KEY_CTX_ASSETS_TEST;
 	}
 
 	req->flags = cpu_to_le32(flags);
+	req->flags2 = cpu_to_le32(flags2);
 	return hwrm_req_send_silent(bp, req);
 }
 
@@ -9748,6 +9759,7 @@ int bnxt_hwrm_func_resc_qcaps(struct bnxt *bp, bool all)
 	struct hwrm_func_resource_qcaps_output *resp;
 	struct hwrm_func_resource_qcaps_input *req;
 	struct bnxt_hw_resc *hw_resc = &bp->hw_resc;
+	struct bnxt_hw_crypto_resc *crypto_resc;
 	int rc;
 
 	rc = hwrm_req_init(bp, req, HWRM_FUNC_RESOURCE_QCAPS);
@@ -9785,6 +9797,12 @@ int bnxt_hwrm_func_resc_qcaps(struct bnxt *bp, bool all)
 	    hw_resc->max_vnics * BNXT_LARGE_RSS_TO_VNIC_RATIO)
 		bp->rss_cap |= BNXT_RSS_CAP_LARGE_RSS_CTX;
 
+	crypto_resc = &hw_resc->crypto_resc;
+	crypto_resc->min_tx_key_ctxs = le32_to_cpu(resp->min_ktls_tx_key_ctxs);
+	crypto_resc->max_tx_key_ctxs = le32_to_cpu(resp->max_ktls_tx_key_ctxs);
+	crypto_resc->min_rx_key_ctxs = le32_to_cpu(resp->min_ktls_rx_key_ctxs);
+	crypto_resc->max_rx_key_ctxs = le32_to_cpu(resp->max_ktls_rx_key_ctxs);
+
 	if (bp->flags & BNXT_FLAG_CHIP_P5_PLUS) {
 		u16 max_msix = le16_to_cpu(resp->max_msix);
 
drivers/net/ethernet/broadcom/bnxt/bnxt.h +11 -0
index 954c679e0290..53fdc45f8020 100644
@@ -1362,6 +1362,15 @@ struct bnxt_hw_rings {
 	int rss_ctx;
 };
 
+struct bnxt_hw_crypto_resc {
+	u32	min_tx_key_ctxs;
+	u32	max_tx_key_ctxs;
+	u32	resv_tx_key_ctxs;
+	u32	min_rx_key_ctxs;
+	u32	max_rx_key_ctxs;
+	u32	resv_rx_key_ctxs;
+};
+
 struct bnxt_hw_resc {
 	u16	min_rsscos_ctxs;
 	u16	max_rsscos_ctxs;
@@ -1396,6 +1405,8 @@ struct bnxt_hw_resc {
 	u32	max_tx_wm_flows;
 	u32	max_rx_em_flows;
 	u32	max_rx_wm_flows;
+
+	struct bnxt_hw_crypto_resc	crypto_resc;
 };
 
 #define BNXT_LARGE_RSS_TO_VNIC_RATIO	7
drivers/net/ethernet/broadcom/bnxt/bnxt_crypto.c +32 -0
index 0777a26600f5..e1047b4284ea 100644
@@ -80,3 +80,35 @@ void bnxt_free_crypto_info(struct bnxt *bp)
 	kfree(bp->crypto_info);
 	bp->crypto_info = NULL;
 }
+
+/**
+ * bnxt_hwrm_reserve_pf_key_ctxs - Reserve key contexts with firmware
+ * @bp: pointer to bnxt device
+ * @req: pointer to HWRM function config request
+ *
+ * Populates the firmware request with key context reservation parameters
+ * for crypto offload based on current max settings and capabilities.
+ *
+ * Context: Process context during device configuration
+ */
+void bnxt_hwrm_reserve_pf_key_ctxs(struct bnxt *bp,
+				   struct hwrm_func_cfg_input *req)
+{
+	struct bnxt_crypto_info *crypto = bp->crypto_info;
+	struct bnxt_hw_resc *hw_resc = &bp->hw_resc;
+	struct bnxt_hw_crypto_resc *crypto_resc;
+	u32 tx, rx;
+
+	if (!crypto || !BNXT_SUPPORTS_KTLS(bp))
+		return;
+
+	crypto_resc = &hw_resc->crypto_resc;
+	tx = min(BNXT_TCK(crypto).max_ctx, crypto_resc->max_tx_key_ctxs);
+	rx = min(BNXT_RCK(crypto).max_ctx, crypto_resc->max_rx_key_ctxs);
+	req->num_ktls_tx_key_ctxs = cpu_to_le32(tx);
+	req->num_ktls_rx_key_ctxs = cpu_to_le32(rx);
+	if (tx)
+		req->enables |= cpu_to_le32(FUNC_CFG_REQ_ENABLES_KTLS_TX_KEY_CTXS);
+	if (rx)
+		req->enables |= cpu_to_le32(FUNC_CFG_REQ_ENABLES_KTLS_RX_KEY_CTXS);
+}
drivers/net/ethernet/broadcom/bnxt/bnxt_crypto.h +7 -0
index 629388fe1e6d..e090491006db 100644
@@ -34,6 +34,8 @@ struct bnxt_crypto_info {
 void bnxt_alloc_crypto_info(struct bnxt *bp,
 			    struct hwrm_func_qcaps_output *resp);
 void bnxt_free_crypto_info(struct bnxt *bp);
+void bnxt_hwrm_reserve_pf_key_ctxs(struct bnxt *bp,
+				   struct hwrm_func_cfg_input *req);
 #else
 static inline void bnxt_alloc_crypto_info(struct bnxt *bp,
 					  struct hwrm_func_qcaps_output *resp)
@@ -43,5 +45,10 @@ static inline void bnxt_alloc_crypto_info(struct bnxt *bp,
 static inline void bnxt_free_crypto_info(struct bnxt *bp)
 {
 }
+
+static inline void bnxt_hwrm_reserve_pf_key_ctxs(struct bnxt *bp,
+						 struct hwrm_func_cfg_input *req)
+{
+}
 #endif	/* CONFIG_BNXT_TLS */
 #endif	/* BNXT_CRYPTO_H */
Signature · 1 line
2.51.0
author maintainer
#9 lore raw

PATCH v3 9/15 bnxt_en: Add infrastructure for crypto key context IDs

In reply to Michael Chan

Each kTLS connection requires a crypto key context ID (KID). These KIDs are allocated from the firmware in batches. Add data structure to store these IDs. The bnxt_kid_info structure stores a batch of IDs and it can be linked as we allocate more batches. There is a bitmap in the structure to keep track of which ones are in use. Add APIs to allocate and free these KIDs.

Once allocated, these KIDs are not freed during run-time. They are re-used for new connections. FW reset or HWRM_FUNC_RESET will free all KIDs. Call bnxt_clear_crypto() to clear all KIDs in the driver's structures during these reset events.

---
v3:
Use a larger (12-bit) epoch value for the keys.

Improve comments, kerneldoc, and dmesg.

Make sure bnxt_clear_crypto() is called during shutdown with the BNXT_STATE_OPEN flag cleared.

v2:
https://lore.kernel.org/netdev/[email protected]/

---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c     |  10 +
 .../net/ethernet/broadcom/bnxt/bnxt_crypto.c  | 284 ++++++++++++++++++
 .../net/ethernet/broadcom/bnxt/bnxt_crypto.h  |  66 ++++
 3 files changed, 360 insertions(+)
drivers/net/ethernet/broadcom/bnxt/bnxt.c +10 -0
index 730af6aee0c8..6eef518a96b0 100644
@@ -12854,6 +12854,8 @@ static int bnxt_hwrm_if_change(struct bnxt *bp, bool up)
 				bnxt_ulp_irq_stop(bp);
 			bnxt_free_ctx_mem(bp, false);
 			bnxt_dcb_free(bp);
+			if (fw_reset || caps_change)
+				bnxt_clear_crypto(bp);
 			rc = bnxt_fw_init_one(bp);
 			if (rc) {
 				clear_bit(BNXT_STATE_FW_RESET_DET, &bp->state);
@@ -14590,6 +14592,7 @@ static void bnxt_fw_reset_close(struct bnxt *bp)
 	bnxt_hwrm_func_drv_unrgtr(bp);
 	if (pci_is_enabled(bp->pdev))
 		pci_disable_device(bp->pdev);
+	bnxt_clear_crypto(bp);
 	bnxt_free_ctx_mem(bp, false);
 }
 
@@ -17234,6 +17237,12 @@ static int bnxt_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	rc = bnxt_dl_register(bp);
 	if (rc)
 		goto init_err_dl;
+	rc = bnxt_crypto_init(bp);
+	if (rc) {
+		bnxt_free_crypto_info(bp);
+		netdev_warn(bp->dev, "Failed to initialize crypto offload, err = %d\n",
+			    rc);
+	}
 
 	INIT_LIST_HEAD(&bp->usr_fltr_list);
 
@@ -17460,6 +17469,7 @@ static pci_ers_result_t bnxt_io_error_detected(struct pci_dev *pdev,
 
 	if (pci_is_enabled(pdev))
 		pci_disable_device(pdev);
+	bnxt_clear_crypto(bp);
 	bnxt_free_ctx_mem(bp, false);
 	netdev_unlock(netdev);
 
drivers/net/ethernet/broadcom/bnxt/bnxt_crypto.c +284 -0

311 lines not on this page · raw message

drivers/net/ethernet/broadcom/bnxt/bnxt_crypto.h +66 -0

100 lines not on this page · raw message

Signature · 1 line
2.51.0
maintainer
#10 lore raw

Re: [PATCH net-next v3 09/15] bnxt_en: Add infrastructure for crypto key context IDs

Quoted 6 lines · On Sun, 14 Jun 2026 00:24:01 -0700 Michael Chan wrote:

Each kTLS connection requires a crypto key context ID (KID). These KIDs are allocated from the firmware in batches. Add data structure to store these IDs. The bnxt_kid_info structure stores a batch of IDs and it can be linked as we allocate more batches. There is a bitmap in the structure to keep track of which ones are in use. Add APIs to allocate and free these KIDs.

../drivers/net/ethernet/broadcom/bnxt/bnxt_ktls.c:283:7: warning: variable 'kctx_tx' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized]

  283 |                 if (retry_cnt++ > KTLS_RETRY_MAX) {
      |                     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/net/ethernet/broadcom/bnxt/bnxt_ktls.c:319:8: note: uninitialized use occurs here
  319 |         kfree(kctx_tx);
      |               ^~~~~~~
../drivers/net/ethernet/broadcom/bnxt/bnxt_ktls.c:283:3: note: remove the 'if' if its condition is always false
  283 |                 if (retry_cnt++ > KTLS_RETRY_MAX) {
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  284 |                         atomic64_inc(&ktls->counters[BNXT_KTLS_ERR_RETRY_EXCEEDED]);
      |                         ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  285 |                         netdev_warn(dev, "%s timed out waiting for device, state %lx\n",
      |                         ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  286 |                                     __func__, bp->state);
      |                                     ~~~~~~~~~~~~~~~~~~~~~
  287 |                         goto free;
      |                         ~~~~~~~~~~
  288 |                 }
      |                 ~
../drivers/net/ethernet/broadcom/bnxt/bnxt_ktls.c:277:7: warning: variable 'kctx_tx' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized]
  277 |                 if (!netif_running(dev) ||
      |                     ^~~~~~~~~~~~~~~~~~~~~~
  278 |                     test_bit(BNXT_STATE_IN_FW_RESET, &bp->state))
      |                     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/net/ethernet/broadcom/bnxt/bnxt_ktls.c:319:8: note: uninitialized use occurs here
  319 |         kfree(kctx_tx);
      |               ^~~~~~~
../drivers/net/ethernet/broadcom/bnxt/bnxt_ktls.c:277:3: note: remove the 'if' if its condition is always false
  277 |                 if (!netif_running(dev) ||
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~
  278 |                     test_bit(BNXT_STATE_IN_FW_RESET, &bp->state))
      |                     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  279 |                         goto free;
      |                         ~~~~~~~~~
../drivers/net/ethernet/broadcom/bnxt/bnxt_ktls.c:277:7: warning: variable 'kctx_tx' is used uninitialized whenever '||' condition is true [-Wsometimes-uninitialized]
  277 |                 if (!netif_running(dev) ||
      |                     ^~~~~~~~~~~~~~~~~~~
../drivers/net/ethernet/broadcom/bnxt/bnxt_ktls.c:319:8: note: uninitialized use occurs here
  319 |         kfree(kctx_tx);
      |               ^~~~~~~
../drivers/net/ethernet/broadcom/bnxt/bnxt_ktls.c:277:7: note: remove the '||' if its condition is always false
  277 |                 if (!netif_running(dev) ||
      |                     ^~~~~~~~~~~~~~~~~~~~~~
../drivers/net/ethernet/broadcom/bnxt/bnxt_ktls.c:260:42: note: initialize the variable 'kctx_tx' to silence this warning
  260 |         struct bnxt_ktls_offload_ctx_tx *kctx_tx;
      |                                                 ^
      |                                                  = NULL
Signature · 1 line
pw-bot: cr
author maintainer
#11 lore raw

PATCH v3 10/15 bnxt_en: Add MPC transmit and completion functions

In reply to Michael Chan

Add transmit, ring selection, and completion functions for midpath rings. These will be used to send control data to the crypto engines.

---
v3:
Use WRITE_ONCE() for TX prod/cons.

v2:
https://lore.kernel.org/netdev/[email protected]/

Fix unused variable warnings

v1:
https://lore.kernel.org/netdev/[email protected]/

---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c     |   3 +
 drivers/net/ethernet/broadcom/bnxt/bnxt.h     |   2 +
 drivers/net/ethernet/broadcom/bnxt/bnxt_mpc.c | 157 ++++++++++++++++++
 drivers/net/ethernet/broadcom/bnxt/bnxt_mpc.h |  65 ++++++++
 4 files changed, 227 insertions(+)
drivers/net/ethernet/broadcom/bnxt/bnxt.c +3 -0
index 6eef518a96b0..dc8957243cc6 100644
@@ -3109,6 +3109,9 @@ static int __bnxt_poll_work(struct bnxt *bp, struct bnxt_cp_ring_info *cpr,
 				rx_pkts++;
 			else if (rc == -EBUSY)	/* partial completion */
 				break;
+		} else if (cmp_type == CMP_TYPE_MPC_CMP) {
+			if (bnxt_mpc_cmp(bp, cpr, &raw_cons))
+				break;
 		} else if (unlikely(cmp_type == CMPL_BASE_TYPE_HWRM_DONE ||
 				    cmp_type == CMPL_BASE_TYPE_HWRM_FWD_REQ ||
 				    cmp_type == CMPL_BASE_TYPE_HWRM_ASYNC_EVENT)) {
drivers/net/ethernet/broadcom/bnxt/bnxt.h +2 -0
index 53fdc45f8020..7e24949f2238 100644
@@ -47,6 +47,7 @@ struct tx_bd {
 	__le32 tx_bd_len_flags_type;
 	#define TX_BD_TYPE					(0x3f << 0)
 	 #define TX_BD_TYPE_SHORT_TX_BD				 (0x00 << 0)
+	 #define TX_BD_TYPE_MPC_TX_BD				 (0x08 << 0)
 	 #define TX_BD_TYPE_LONG_TX_BD				 (0x10 << 0)
 	#define TX_BD_FLAGS_PACKET_END				(1 << 6)
 	#define TX_BD_FLAGS_NO_CMPL				(1 << 7)
@@ -160,6 +161,7 @@ struct tx_cmp {
 	 #define CMP_TYPE_RX_TPA_AGG_CMP			 22
 	 #define CMP_TYPE_RX_L2_V3_CMP				 23
 	 #define CMP_TYPE_RX_L2_TPA_START_V3_CMP		 25
+	 #define CMP_TYPE_MPC_CMP				 30
 	 #define CMP_TYPE_STATUS_CMP				 32
 	 #define CMP_TYPE_REMOTE_DRIVER_REQ			 34
 	 #define CMP_TYPE_REMOTE_DRIVER_RESP			 36
drivers/net/ethernet/broadcom/bnxt/bnxt_mpc.c +157 -0

160 lines not on this page · raw message

drivers/net/ethernet/broadcom/bnxt/bnxt_mpc.h +65 -0

87 lines not on this page · raw message

Signature · 1 line
2.51.0
author maintainer
#12 lore raw

PATCH v3 11/15 bnxt_en: Add crypto MPC transmit/completion infrastructure

In reply to Michael Chan

Add infrastructure to support sending crypto commands using the midpath channels (MPCs). bnxt_xmit_crypto_cmd() is used to send a crypto command and sleep with timeout until the completion is received.
If it times out, we recover by resetting the MPC. The next patch will
use this infrastructure to offload kTLS connections.

---
v3:
Multiple improvements for the MPC timeout logic, including the use of refcount to terminate the timeout instead of the arbitrary 200msec poll wait, add synchronize_net().

v2:
https://lore.kernel.org/netdev/[email protected]/

---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c     |   4 +-
 drivers/net/ethernet/broadcom/bnxt/bnxt.h     |   2 +
 .../net/ethernet/broadcom/bnxt/bnxt_crypto.c  | 138 +++++++++++++++-
 .../net/ethernet/broadcom/bnxt/bnxt_crypto.h  |  95 +++++++++++
 drivers/net/ethernet/broadcom/bnxt/bnxt_mpc.c | 153 ++++++++++++++++++
 drivers/net/ethernet/broadcom/bnxt/bnxt_mpc.h |   9 ++
 6 files changed, 398 insertions(+), 3 deletions(-)
drivers/net/ethernet/broadcom/bnxt/bnxt.c +2 -2
index dc8957243cc6..6779fd993184 100644
@@ -7714,7 +7714,7 @@ void bnxt_hwrm_cp_ring_free(struct bnxt *bp, struct bnxt_cp_ring_info *cpr)
 	ring->fw_ring_id = INVALID_HW_RING_ID;
 }
 
-static void bnxt_clear_one_cp_ring(struct bnxt *bp, struct bnxt_cp_ring_info *cpr)
+void bnxt_clear_one_cp_ring(struct bnxt *bp, struct bnxt_cp_ring_info *cpr)
 {
 	struct bnxt_ring_struct *ring = &cpr->cp_ring_struct;
 	int i, size = ring->ring_mem.page_size;
@@ -14378,7 +14378,7 @@ static int bnxt_hwrm_rx_ring_reset(struct bnxt *bp, int ring_nr)
 	return hwrm_req_send_silent(bp, req);
 }
 
-static void bnxt_reset_task(struct bnxt *bp, bool silent)
+void bnxt_reset_task(struct bnxt *bp, bool silent)
 {
 	if (!silent)
 		bnxt_dbg_dump_states(bp);
drivers/net/ethernet/broadcom/bnxt/bnxt.h +2 -0
index 7e24949f2238..e91c9f27cd99 100644
@@ -3020,6 +3020,7 @@ int bnxt_hwrm_tx_ring_alloc(struct bnxt *bp, struct bnxt_tx_ring_info *txr,
 void bnxt_hwrm_tx_ring_free(struct bnxt *bp, struct bnxt_tx_ring_info *txr,
 			    bool close_path);
 void bnxt_hwrm_cp_ring_free(struct bnxt *bp, struct bnxt_cp_ring_info *cpr);
+void bnxt_clear_one_cp_ring(struct bnxt *bp, struct bnxt_cp_ring_info *cpr);
 int bnxt_total_tx_rings(struct bnxt *bp);
 int __bnxt_hwrm_get_tx_rings(struct bnxt *bp, u16 fid, int *tx_rings);
 int bnxt_nq_rings_in_use(struct bnxt *bp);
@@ -3065,6 +3066,7 @@ void bnxt_get_ring_drv_stats(struct bnxt *bp,
 bool bnxt_rfs_capable(struct bnxt *bp, bool new_rss_ctx);
 int bnxt_dbg_hwrm_rd_reg(struct bnxt *bp, u32 reg_off, u16 num_words,
 			 u32 *reg_buf);
+void bnxt_reset_task(struct bnxt *bp, bool silent);
 void bnxt_fw_exception(struct bnxt *bp);
 void bnxt_fw_reset(struct bnxt *bp);
 int bnxt_check_rings(struct bnxt *bp, int tx, int rx, bool sh, int tcs,
drivers/net/ethernet/broadcom/bnxt/bnxt_crypto.c +137 -1

182 lines not on this page · raw message

drivers/net/ethernet/broadcom/bnxt/bnxt_crypto.h +95 -0

123 lines not on this page · raw message

drivers/net/ethernet/broadcom/bnxt/bnxt_mpc.c +153 -0

182 lines not on this page · raw message

drivers/net/ethernet/broadcom/bnxt/bnxt_mpc.h +9 -0
index aa7f2666f0ca..b9a9fc771665 100644
@@ -22,6 +22,8 @@ enum bnxt_mpc_type {
 #define BNXT_DFLT_MPC_TCE	BNXT_MAX_MPC
 #define BNXT_DFLT_MPC_RCE	BNXT_MAX_MPC
 
+#define BNXT_MPC_TMO_MSECS      1000
+
 struct bnxt_mpc_info {
 	u8			mpc_chnls_cap;
 	u8			mpc_cp_rings;
@@ -106,6 +108,7 @@ void bnxt_hwrm_mpc_ring_free(struct bnxt *bp, bool close_path);
 struct bnxt_tx_ring_info *bnxt_select_mpc_ring(struct bnxt *bp, int ring_type);
 int bnxt_start_xmit_mpc(struct bnxt *bp, struct bnxt_tx_ring_info *txr,
 			void *data, unsigned int len, unsigned long handle);
+int bnxt_mpc_timeout(struct bnxt *bp, struct bnxt_tx_ring_info *txr);
 int bnxt_mpc_cmp(struct bnxt *bp, struct bnxt_cp_ring_info *cpr, u32 *raw_cons);
 #else
 static inline void bnxt_alloc_mpc_info(struct bnxt *bp, u8 mpc_chnls_cap)
@@ -192,6 +195,12 @@ static inline int bnxt_start_xmit_mpc(struct bnxt *bp,
 	return -EOPNOTSUPP;
 }
 
+static inline int bnxt_mpc_timeout(struct bnxt *bp,
+				   struct bnxt_tx_ring_info *txr)
+{
+	return -EOPNOTSUPP;
+}
+
 static inline int bnxt_mpc_cmp(struct bnxt *bp, struct bnxt_cp_ring_info *cpr,
 			       u32 *raw_cons)
 {
Signature · 1 line
2.51.0
author maintainer
#13 lore raw

PATCH v3 12/15 bnxt_en: Support kTLS TX offload by implementing .tls_dev_add/del()

In reply to Michael Chan

Add basic infrastructure to allocate and free kTLS context IDs (KIDs) to support kTLS TX offload. To offload a connection in .tls_dev_add(), the first step is to allocate a KID. After that the kTLS offload command is sent to the HW via MPC using the function bnxt_xmit_crypto_cmd() introduced in the last patch.

In .tls_dev_del(), we send the delete command to the HW using the same bnxt_xmit_crypto_cmd(). After that we free the KID, making it available for new offload. There is extra logic to handle ifdown, FW reset, and device reconfiguration while deleting the connection.

bnxt_ktls_init() assigns bnxt_ktls_ops to the netdev and sets up the TLS TX offload feature. bnxt_ktls_init() will be called in the next patch.

---
v3:
Use wait_event() in bnxt_ktls_dev_del() in case the device is in transient reconfig state instead of poll wait.

Call bnxt_crypto_del_all() after BNXT_STATE_OPEN is cleared as documented.

Use memzero_explicit() to clear sensitive TLS parameters.

v2:
https://lore.kernel.org/netdev/[email protected]/

Fix unused variable warning
Fix error recovery issues

v1:
https://lore.kernel.org/netdev/[email protected]/

---
 drivers/net/ethernet/broadcom/bnxt/Makefile   |   2 +-
 drivers/net/ethernet/broadcom/bnxt/bnxt.c     |  16 +-
 drivers/net/ethernet/broadcom/bnxt/bnxt.h     |   1 +
 .../net/ethernet/broadcom/bnxt/bnxt_crypto.c  |  81 ++++-
 .../net/ethernet/broadcom/bnxt/bnxt_crypto.h  |  11 +
 .../net/ethernet/broadcom/bnxt/bnxt_ktls.c    | 339 ++++++++++++++++++
 .../net/ethernet/broadcom/bnxt/bnxt_ktls.h    | 112 ++++++
 7 files changed, 559 insertions(+), 3 deletions(-)
 create mode 100644 drivers/net/ethernet/broadcom/bnxt/bnxt_ktls.c
 create mode 100644 drivers/net/ethernet/broadcom/bnxt/bnxt_ktls.h
drivers/net/ethernet/broadcom/bnxt/Makefile +1 -1
index 3acdb81fa958..88e68248aad4 100644
@@ -5,4 +5,4 @@ bnxt_en-y := bnxt.o bnxt_hwrm.o bnxt_sriov.o bnxt_ethtool.o bnxt_dcb.o bnxt_ulp.
 bnxt_en-$(CONFIG_BNXT_FLOWER_OFFLOAD) += bnxt_tc.o
 bnxt_en-$(CONFIG_DEBUG_FS) += bnxt_debugfs.o
 bnxt_en-$(CONFIG_BNXT_HWMON) += bnxt_hwmon.o
-bnxt_en-$(CONFIG_BNXT_TLS) += bnxt_mpc.o bnxt_crypto.o
+bnxt_en-$(CONFIG_BNXT_TLS) += bnxt_mpc.o bnxt_crypto.o bnxt_ktls.o
drivers/net/ethernet/broadcom/bnxt/bnxt.c +15 -1
index 6779fd993184..8478589b8b99 100644
@@ -78,6 +78,7 @@
 #include <net/tso.h>
 #include "bnxt_mpc.h"
 #include "bnxt_crypto.h"
+#include "bnxt_ktls.h"
 
 #define BNXT_TX_TIMEOUT		(5 * HZ)
 #define BNXT_DEF_MSG_ENABLE	(NETIF_MSG_DRV | NETIF_MSG_HW | \
@@ -13281,6 +13282,7 @@ static int __bnxt_open_nic(struct bnxt *bp, bool irq_re_init, bool link_re_init)
 		static_branch_disable(&bnxt_xdp_locking_key);
 	}
 	set_bit(BNXT_STATE_OPEN, &bp->state);
+	bnxt_ktls_wake(bp);
 	bnxt_enable_int(bp);
 	/* Enable TX queues */
 	bnxt_tx_enable(bp);
@@ -13422,7 +13424,8 @@ static int bnxt_open(struct net_device *dev)
 static bool bnxt_drv_busy(struct bnxt *bp)
 {
 	return (test_bit(BNXT_STATE_IN_SP_TASK, &bp->state) ||
-		test_bit(BNXT_STATE_READ_STATS, &bp->state));
+		test_bit(BNXT_STATE_READ_STATS, &bp->state) ||
+		bnxt_ktls_busy(bp));
 }
 
 static void bnxt_get_ring_stats(struct bnxt *bp,
@@ -13440,9 +13443,20 @@ static void __bnxt_close_nic(struct bnxt *bp, bool irq_re_init,
 
 	clear_bit(BNXT_STATE_OPEN, &bp->state);
 	smp_mb__after_atomic();
+	/* Wake any kTLS delete waiting on a reconfig so it re-evaluates and
+	 * either keeps waiting for the reopen or aborts (ifdown / FW reset).
+	 */
+	bnxt_ktls_wake(bp);
 	while (bnxt_drv_busy(bp))
 		msleep(20);
 
+	/* Delete all crypto connections and KIDs only on ifdown and FW reset,
+	 * not ethtool config changes.
+	 */
+	if (!netif_running(bp->dev) ||
+	    test_bit(BNXT_STATE_IN_FW_RESET, &bp->state))
+		bnxt_crypto_del_all(bp);
+
 	if (BNXT_SUPPORTS_MULTI_RSS_CTX(bp))
 		bnxt_clear_rss_ctxs(bp);
 	/* Flush rings and disable interrupts */
drivers/net/ethernet/broadcom/bnxt/bnxt.h +1 -0
index e91c9f27cd99..0ca0345a0e11 100644
@@ -2474,6 +2474,7 @@ struct bnxt {
 
 	struct bnxt_mpc_info	*mpc_info;
 	struct bnxt_crypto_info	*crypto_info;
+	struct bnxt_tls_info	*ktls_info;
 
 	unsigned int		current_interval;
 #define BNXT_TIMER_INTERVAL	HZ
drivers/net/ethernet/broadcom/bnxt/bnxt_crypto.c +80 -1

105 lines not on this page · raw message

drivers/net/ethernet/broadcom/bnxt/bnxt_crypto.h +11 -0
index e873994fb098..72e18860cec1 100644
@@ -144,6 +144,8 @@ struct bnxt_crypto_cmd_ctx {
 #ifdef CONFIG_BNXT_TLS
 void bnxt_alloc_crypto_info(struct bnxt *bp,
 			    struct hwrm_func_qcaps_output *resp);
+int bnxt_crypto_del(struct bnxt *bp, u8 type, u8 kind, u32 kid);
+void bnxt_crypto_del_all(struct bnxt *bp);
 void bnxt_clear_crypto(struct bnxt *bp);
 void bnxt_free_crypto_info(struct bnxt *bp);
 void bnxt_hwrm_reserve_pf_key_ctxs(struct bnxt *bp,
@@ -163,6 +165,15 @@ static inline void bnxt_alloc_crypto_info(struct bnxt *bp,
 {
 }
 
+static inline int bnxt_crypto_del(struct bnxt *bp, u8 type, u8 kind, u32 kid)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline void bnxt_crypto_del_all(struct bnxt *bp)
+{
+}
+
 static inline void bnxt_clear_crypto(struct bnxt *bp)
 {
 }
drivers/net/ethernet/broadcom/bnxt/bnxt_ktls.c new file +339 -0

339 lines not on this page · raw message

drivers/net/ethernet/broadcom/bnxt/bnxt_ktls.h new file +112 -0

112 lines not on this page · raw message

Signature · 1 line
2.51.0
maintainer
#14 lore raw

Re: [PATCH net-next v3 12/15] bnxt_en: Support kTLS TX offload by implementing .tls_dev_add/del()

Quoted 6 lines · On Sun, 14 Jun 2026 00:24:04 -0700 Michael Chan wrote:

Add basic infrastructure to allocate and free kTLS context IDs (KIDs) to support kTLS TX offload. To offload a connection in .tls_dev_add(), the first step is to allocate a KID. After that the kTLS offload command is sent to the HW via MPC using the function bnxt_xmit_crypto_cmd() introduced in the last patch.

Quoted 8 lines

In .tls_dev_del(), we send the delete command to the HW using the same bnxt_xmit_crypto_cmd(). After that we free the KID, making it available for new offload. There is extra logic to handle ifdown, FW reset, and device reconfiguration while deleting the connection.

bnxt_ktls_init() assigns bnxt_ktls_ops to the netdev and sets up the TLS TX offload feature. bnxt_ktls_init() will be called in the next patch.

Warning: drivers/net/ethernet/broadcom/bnxt/bnxt_crypto.c:320 expecting prototype for bnxt_free_one_ctx(). Prototype was for bnxt_free_one_kctx() instead

author maintainer
#15 lore raw

PATCH v3 13/15 bnxt_en: Implement kTLS TX normal path

In reply to Michael Chan

Offload TLS encryption of TX packets to the hardware if the TCP sequence number is the expected one. Fall back to software encryption otherwise. Implement all the TLS TX logic to check the TCP sequence number and set up the BD in the new function bnxt_ktls_xmit(). The stored TCP sequence number is only updated when BD is in the ring and guaranteed to be transmitted.

Basic kTLS statistics reporting for ethtool -S is also added. Because there can be multiple TX rings (if there are MQPRIO TCs) sharing the same bnxt_cp_ring_info containing the bnxt_sw_stats, we need to store the kTLS software TX stats in bnxt_tx_ring_info instead.

The next patches will add support for the exception path with out-of-order TCP sequence number.

---
v3:
Use per TX ring TLS stats structures.

Defer tcp sequence and stats update until the BD is on the ring.

Increment the drop counter if kTLS drops the packet.

v2:
https://lore.kernel.org/netdev/[email protected]/

---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c     | 23 ++++-
 drivers/net/ethernet/broadcom/bnxt/bnxt.h     | 41 +++++++-
 .../net/ethernet/broadcom/bnxt/bnxt_crypto.c  |  1 +
 .../net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 46 +++++++++
 drivers/net/ethernet/broadcom/bnxt/bnxt_gso.c |  2 +-
 .../net/ethernet/broadcom/bnxt/bnxt_ktls.c    | 93 +++++++++++++++++++
 .../net/ethernet/broadcom/bnxt/bnxt_ktls.h    | 61 ++++++++++++
 7 files changed, 259 insertions(+), 8 deletions(-)
drivers/net/ethernet/broadcom/bnxt/bnxt.c +20 -3
index 8478589b8b99..3560ee5525fd 100644
@@ -481,6 +481,7 @@ static netdev_tx_t bnxt_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	dma_addr_t mapping;
 	unsigned int length, pad = 0;
 	u32 len, free_size, vlan_tag_flags, cfa_action, flags;
+	struct bnxt_ktls_offload_ctx_tx *kctx_tx = NULL;
 	struct bnxt_ptp_cfg *ptp = bp->ptp_cfg;
 	struct pci_dev *pdev = bp->pdev;
 	u16 prod, last_frag, txts_prod;
@@ -488,6 +489,7 @@ static netdev_tx_t bnxt_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	struct bnxt_sw_tx_bd *tx_buf;
 	__le32 lflags = 0;
 	skb_frag_t *frag;
+	u32 kid = 0;
 
 	i = skb_get_queue_mapping(skb);
 	if (unlikely(i >= bp->tx_nr_rings)) {
@@ -527,6 +529,12 @@ static netdev_tx_t bnxt_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			return NETDEV_TX_BUSY;
 	}
 
+	skb = bnxt_ktls_xmit(bp, txr, skb, &lflags, &kid, &kctx_tx);
+	if (unlikely(!skb)) {
+		dev_core_stats_tx_dropped_inc(dev);
+		return NETDEV_TX_OK;
+	}
+
 	length = skb->len;
 	len = skb_headlen(skb);
 	last_frag = skb_shinfo(skb)->nr_frags;
@@ -675,7 +683,7 @@ static netdev_tx_t bnxt_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	prod = NEXT_TX(prod);
 	txbd1 = bnxt_init_ext_bd(bp, txr, prod, lflags, vlan_tag_flags,
-				 cfa_action);
+				 cfa_action, kid);
 
 	if (skb_is_gso(skb)) {
 		bool udp_gso = !!(skb_shinfo(skb)->gso_type & SKB_GSO_UDP_L4);
@@ -696,9 +704,10 @@ static netdev_tx_t bnxt_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 		txbd1->tx_bd_hsize_lflags |= cpu_to_le32(TX_BD_FLAGS_LSO |
 					TX_BD_FLAGS_T_IPID |
-					(hdr_len << (TX_BD_HSIZE_SHIFT - 1)));
+					((hdr_len >> 1) << TX_BD_HSIZE_SHIFT));
 		length = skb_shinfo(skb)->gso_size;
-		txbd1->tx_bd_mss = cpu_to_le32(length);
+		txbd1->tx_bd_kid_mss = cpu_to_le32(BNXT_TX_KID_HI(kid) |
+						   (length & TX_BD_MSS));
 		length += hdr_len;
 	} else if (skb->ip_summed == CHECKSUM_PARTIAL) {
 		txbd1->tx_bd_hsize_lflags |=
@@ -751,6 +760,9 @@ static netdev_tx_t bnxt_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	prod = NEXT_TX(prod);
 	WRITE_ONCE(txr->tx_prod, prod);
 
+	/* Commit the kTLS state now that the BD is in the ring. */
+	bnxt_ktls_xmit_commit(txr, kctx_tx);
+
 	if (!netdev_xmit_more() || netif_xmit_stopped(txq)) {
 		bnxt_txr_db_kick(bp, txr, prod);
 	} else {
@@ -4079,6 +4091,8 @@ static void bnxt_free_tx_rings(struct bnxt *bp)
 
 		bnxt_free_tx_inline_buf(txr, pdev);
 
+		bnxt_ktls_free_tx_ring_stats(txr);
+
 		ring = &txr->tx_ring_struct;
 
 		bnxt_free_ring(bp, &ring->ring_mem);
@@ -4154,6 +4168,9 @@ static int bnxt_alloc_tx_rings(struct bnxt *bp)
 		qidx = bp->tc_to_qidx[j];
 		ring->queue_id = bp->q_info[qidx].queue_id;
 		spin_lock_init(&txr->tx_lock);
+		rc = bnxt_ktls_alloc_tx_ring_stats(bp, txr);
+		if (rc)
+			return rc;
 		if (i < bp->tx_nr_rings_xdp)
 			continue;
 		if (BNXT_RING_TO_TC_OFF(bp, i) == (bp->tx_nr_rings_per_tc - 1))
drivers/net/ethernet/broadcom/bnxt/bnxt.h +37 -4

79 lines not on this page · raw message

drivers/net/ethernet/broadcom/bnxt/bnxt_crypto.c +1 -0
index b82fd40d5de1..881c50ca2dcb 100644
@@ -570,6 +570,7 @@ int bnxt_crypto_init(struct bnxt *bp)
 	if (rc)
 		return rc;
 
+	bnxt_ktls_init(bp);
 	return 0;
 }
 
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c +46 -0

82 lines not on this page · raw message

drivers/net/ethernet/broadcom/bnxt/bnxt_gso.c +1 -1
index f317f60414e8..b4c37a6c9f0f 100644
@@ -168,7 +168,7 @@ netdev_tx_t bnxt_sw_udp_gso_xmit(struct bnxt *bp,
 
 		prod = NEXT_TX(prod);
 		bnxt_init_ext_bd(bp, txr, prod, csum,
-				 vlan_tag_flags, cfa_action);
+				 vlan_tag_flags, cfa_action, 0);
 
 		/* set dma_unmap_len on the LAST BD touching each
 		 * region. Since completions are in-order, the last segment
drivers/net/ethernet/broadcom/bnxt/bnxt_ktls.c +93 -0

102 lines not on this page · raw message

drivers/net/ethernet/broadcom/bnxt/bnxt_ktls.h +61 -0

84 lines not on this page · raw message

Signature · 1 line
2.51.0
author maintainer
#16 lore raw

PATCH v3 14/15 bnxt_en: Add support for inline transmit BDs

In reply to Michael Chan

Newer chips (P5_PLUS) support inline transmit BDs that contain extra data. One such use case is to transmit out-of-sequence kTLS packets with encryption enabled. To account for these inline BDs during TX completion, we add the inline_data_bds field to struct bnxt_sw_tx_bd (tx_buf). tx_buf->is_push will always be set when sending these inline BDs as the operation is similar to push packets. tx_buf->skb will always be NULL as there is no associated SKB.

The next patch will make use of this feature.

---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 15 ++++++++++++---
 drivers/net/ethernet/broadcom/bnxt/bnxt.h |  1 +
 2 files changed, 13 insertions(+), 3 deletions(-)
drivers/net/ethernet/broadcom/bnxt/bnxt.c +12 -3
index 3560ee5525fd..ce3175721be2 100644
@@ -848,7 +848,7 @@ static bool __bnxt_tx_int(struct bnxt *bp, struct bnxt_tx_ring_info *txr,
 		head_buf = tx_buf;
 		skb = tx_buf->skb;
 
-		if (unlikely(!skb)) {
+		if (unlikely(!skb && !tx_buf->is_push)) {
 			bnxt_sched_reset_txr(bp, txr, cons);
 			return rc;
 		}
@@ -860,13 +860,22 @@ static bool __bnxt_tx_int(struct bnxt *bp, struct bnxt_tx_ring_info *txr,
 		}
 
 		cons = NEXT_TX(cons);
-		tx_pkts++;
-		tx_bytes += skb->len;
+		if (skb) {
+			tx_pkts++;
+			tx_bytes += skb->len;
+		}
 		tx_buf->skb = NULL;
 		tx_buf->is_ts_pkt = 0;
 
 		if (tx_buf->is_push) {
 			tx_buf->is_push = 0;
+			cons += tx_buf->inline_data_bds;
+			tx_buf->inline_data_bds = 0;
+			if (!skb) {
+				/* presync BD */
+				cons = NEXT_TX(cons);
+				continue;
+			}
 			goto next_tx_int;
 		}
 
drivers/net/ethernet/broadcom/bnxt/bnxt.h +1 -0
index 4ca36b99c4a3..500bb9171274 100644
@@ -917,6 +917,7 @@ struct bnxt_sw_tx_bd {
 	u8			is_push;
 	u8			is_sw_gso;
 	u8			action;
+	u8			inline_data_bds;
 	unsigned short		nr_frags;
 	union {
 		u16			rx_prod;
Signature · 1 line
2.51.0
author maintainer
#17 lore raw

PATCH v3 15/15 bnxt_en: Add kTLS retransmission support

In reply to Michael Chan

If TCP retransmits a TLS packet that requires encryption by the NIC, the TCP sequence number will go backwards and the hardware will require some assistance from the driver. The driver needs to retrieve the TLS record that covers the byte sequence of the retransmitted packet. If the retransmitted packet does not include the tag, the hardware can simply encrypt the packet using the informtaion in the TLS record.

The driver provides the TLS record information for the retransmitted packet in the presync TX BD. The presync TX BD introduced in the last patch is treated very much like a TX push BD with inline data. The only exception is that no SKB will be stored for the presync TX BD.

Retransmission that includes the TLS tag will be handled in future patches.

---
v3:
Unwind the TX ring properly if the TLS packet cannot be sent.

Improve the OOO TLS counters.

Fix endianness of the record sequence number.

Check valid return address from skb_frag_address_safe().

v2:
https://lore.kernel.org/netdev/[email protected]/

---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c     |  14 +-
 drivers/net/ethernet/broadcom/bnxt/bnxt.h     |   4 +
 .../net/ethernet/broadcom/bnxt/bnxt_ethtool.c |   4 +
 .../net/ethernet/broadcom/bnxt/bnxt_ktls.c    | 152 +++++++++++++++++-
 .../net/ethernet/broadcom/bnxt/bnxt_ktls.h    |   2 +
 5 files changed, 167 insertions(+), 9 deletions(-)
drivers/net/ethernet/broadcom/bnxt/bnxt.c +11 -3
index ce3175721be2..2e4d11977407 100644
@@ -482,9 +482,9 @@ static netdev_tx_t bnxt_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	unsigned int length, pad = 0;
 	u32 len, free_size, vlan_tag_flags, cfa_action, flags;
 	struct bnxt_ktls_offload_ctx_tx *kctx_tx = NULL;
+	u16 prod, start_prod, last_frag, txts_prod;
 	struct bnxt_ptp_cfg *ptp = bp->ptp_cfg;
 	struct pci_dev *pdev = bp->pdev;
-	u16 prod, last_frag, txts_prod;
 	struct bnxt_tx_ring_info *txr;
 	struct bnxt_sw_tx_bd *tx_buf;
 	__le32 lflags = 0;
@@ -500,7 +500,6 @@ static netdev_tx_t bnxt_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	txq = netdev_get_tx_queue(dev, i);
 	txr = &bp->tx_ring[bp->tx_ring_map[i]];
-	prod = txr->tx_prod;
 
 #if (MAX_SKB_FRAGS > TX_MAX_FRAGS)
 	if (skb_shinfo(skb)->nr_frags > TX_MAX_FRAGS) {
@@ -529,12 +528,14 @@ static netdev_tx_t bnxt_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			return NETDEV_TX_BUSY;
 	}
 
+	start_prod = txr->tx_prod;
 	skb = bnxt_ktls_xmit(bp, txr, skb, &lflags, &kid, &kctx_tx);
 	if (unlikely(!skb)) {
 		dev_core_stats_tx_dropped_inc(dev);
 		return NETDEV_TX_OK;
 	}
 
+	prod = txr->tx_prod;
 	length = skb->len;
 	len = skb_headlen(skb);
 	last_frag = skb_shinfo(skb)->nr_frags;
@@ -817,9 +818,16 @@ static netdev_tx_t bnxt_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			/* set SKB to err so PTP worker will clean up */
 			ptp->txts_req[txts_prod].tx_skb = ERR_PTR(-EIO);
 	}
+	txr->tx_buf_ring[RING_TX(bp, txr->tx_prod)].skb = NULL;
+	/* Unwind any kTLS presync BDs */
+	if (unlikely(txr->tx_prod != start_prod)) {
+		tx_buf = &txr->tx_buf_ring[RING_TX(bp, start_prod)];
+		tx_buf->is_push = 0;
+		tx_buf->inline_data_bds = 0;
+		WRITE_ONCE(txr->tx_prod, start_prod);
+	}
 	if (txr->kick_pending)
 		bnxt_txr_db_kick(bp, txr, txr->tx_prod);
-	txr->tx_buf_ring[RING_TX(bp, txr->tx_prod)].skb = NULL;
 	dev_core_stats_tx_dropped_inc(dev);
 	return NETDEV_TX_OK;
 }
drivers/net/ethernet/broadcom/bnxt/bnxt.h +4 -0
index 500bb9171274..339f5bdf2f20 100644
@@ -1191,6 +1191,10 @@ struct bnxt_cmn_sw_stats {
 enum bnxt_ktls_data_counters {
 	BNXT_KTLS_TX_PKTS = 0,
 	BNXT_KTLS_TX_BYTES,
+	BNXT_KTLS_TX_OOO_PKTS,
+	BNXT_KTLS_TX_OOO_FALLBACK_NO_SYNC,
+	BNXT_KTLS_TX_OOO_FALLBACK_NO_SPACE,
+	BNXT_KTLS_TX_OOO_FALLBACK_NO_HDR,
 
 	BNXT_KTLS_MAX_DATA_COUNTERS,
 };
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c +4 -0
index 9b2bc38236d7..8d2ee1976e1a 100644
@@ -359,6 +359,10 @@ static const char *const bnxt_ring_drv_stats_arr[] = {
 static const char *const bnxt_ktls_data_stats[] = {
 	[BNXT_KTLS_TX_PKTS]		= "tx_tls_encrypted_packets",
 	[BNXT_KTLS_TX_BYTES]		= "tx_tls_encrypted_bytes",
+	[BNXT_KTLS_TX_OOO_PKTS]			= "tx_tls_ooo_packets",
+	[BNXT_KTLS_TX_OOO_FALLBACK_NO_SYNC]	= "tx_tls_ooo_fallback_no_sync",
+	[BNXT_KTLS_TX_OOO_FALLBACK_NO_SPACE]	= "tx_tls_ooo_fallback_no_space",
+	[BNXT_KTLS_TX_OOO_FALLBACK_NO_HDR]	= "tx_tls_ooo_fallback_no_hdr",
 };
 
 /* kTLS control plane counter strings indexed by enum bnxt_ktls_ctrl_counters */
drivers/net/ethernet/broadcom/bnxt/bnxt_ktls.c +146 -6

187 lines not on this page · raw message

drivers/net/ethernet/broadcom/bnxt/bnxt_ktls.h +2 -0
index 1c935e0d413d..40b94bbf5a38 100644
@@ -43,6 +43,8 @@ struct bnxt_ktls_offload_ctx_tx {
 	u32		next_tcp_seq_no;/* staged tcp seq no */
 	u32		kid;
 	u32		pending_bytes;	/* staged payload bytes */
+	u32		pending_fwd:1;
+	u32		pending_ooo:1;
 };
 
 struct bnxt_ktls_tx_driver_state {
Signature · 1 line
2.51.0