Skip to contentSkip to conversation

ALSA: hda/conexant: Add pin config quirk for Lenovo IdeaPad Slim 5 16AKP10

PATCH Superseded Galen 2 participants 4 messages Jun 15 – Jun 17 Sound

lore
Share & tools
lore

Galen

author
#0 lore raw

PATCH 1/1 ALSA: hda/conexant: Add pin config quirk for Lenovo IdeaPad Slim 5 16AKP10

The Lenovo IdeaPad Slim 5 16AKP10 (PCI SSID 17aa:38b6) uses the Conexant SN6140 codec. The internal microphone is on pin 0x1a but the BIOS configures it with pin default 0x95a60120, which includes a jack detection bit that causes the kernel to treat it as an unplugged external mic rather than a fixed internal mic.

Add a pin config quirk that overrides pin 0x1a to 0x95a60130, setting the connectivity bits to indicate a fixed/always-connected device. This allows the internal microphone to be correctly identified and used.

---
 sound/hda/codecs/conexant.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)
sound/hda/codecs/conexant.c +12 -0
index e3b6aaabe..40d4591f9 100644
@@ -291,6 +291,7 @@ enum {
 	CXT_FIXUP_HEADSET_MIC,
 	CXT_FIXUP_HP_MIC_NO_PRESENCE,
 	CXT_PINCFG_SWS_JS201D,
+	CXT_PINCFG_LENOVO_IDEAPAD_SLIM5_16AKP10,
 	CXT_PINCFG_TOP_SPEAKER,
 	CXT_FIXUP_HP_A_U,
 	CXT_FIXUP_ACER_SWIFT_HP,
@@ -826,6 +827,12 @@ static const struct hda_pintbl cxt_pincfg_lemote[] = {
 	{}
 };
 
+/* Lenovo IdeaPad Slim 5 16AKP10 with SN6140 */
+static const struct hda_pintbl cxt_pincfg_lenovo_ideapad_slim5_16akp10[] = {
+	{ 0x1a, 0x95a60130 }, /* Internal mic, fixed/always-connected */
+	{}
+};
+
 /* SuoWoSi/South-holding JS201D with sn6140 */
 static const struct hda_pintbl cxt_pincfg_sws_js201d[] = {
 	{ 0x16, 0x03211040 }, /* hp out */
@@ -1006,6 +1013,10 @@ static const struct hda_fixup cxt_fixups[] = {
 		.type = HDA_FIXUP_PINS,
 		.v.pins = cxt_pincfg_sws_js201d,
 	},
+	[CXT_PINCFG_LENOVO_IDEAPAD_SLIM5_16AKP10] = {
+		.type = HDA_FIXUP_PINS,
+		.v.pins = cxt_pincfg_lenovo_ideapad_slim5_16akp10,
+	},
 	[CXT_PINCFG_TOP_SPEAKER] = {
 		.type = HDA_FIXUP_PINS,
 		.v.pins = (const struct hda_pintbl[]) {
@@ -1116,6 +1127,7 @@ static const struct hda_quirk cxt5066_fixups[] = {
 	SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo IdeaPad Z560", CXT_FIXUP_MUTE_LED_EAPD),
 	SND_PCI_QUIRK(0x17aa, 0x3905, "Lenovo G50-30", CXT_FIXUP_STEREO_DMIC),
 	SND_PCI_QUIRK(0x17aa, 0x390b, "Lenovo G50-80", CXT_FIXUP_STEREO_DMIC),
+	SND_PCI_QUIRK(0x17aa, 0x38b6, "Lenovo IdeaPad Slim 5 16AKP10", CXT_PINCFG_LENOVO_IDEAPAD_SLIM5_16AKP10),
 	SND_PCI_QUIRK(0x17aa, 0x3975, "Lenovo U300s", CXT_FIXUP_STEREO_DMIC),
 	/* NOTE: we'd need to extend the quirk for 17aa:3977 as the same
 	 * PCI SSID is used on multiple Lenovo models
Signature · 1 line
2.53.0
#1 lore raw
Quoted 54 lines · Galen

The Lenovo IdeaPad Slim 5 16AKP10 (PCI SSID 17aa:38b6) uses the Conexant SN6140 codec. The internal microphone is on pin 0x1a but the BIOS configures it with pin default 0x95a60120, which includes a jack detection bit that causes the kernel to treat it as an unplugged external mic rather than a fixed internal mic.

Add a pin config quirk that overrides pin 0x1a to 0x95a60130, setting the connectivity bits to indicate a fixed/always-connected device. This allows the internal microphone to be correctly identified and used.

---
 sound/hda/codecs/conexant.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)
sound/hda/codecs/conexant.c +11 -0
index e3b6aaabe..40d4591f9 100644
@@ -291,6 +291,7 @@ enum {
 	CXT_FIXUP_HEADSET_MIC,
 	CXT_FIXUP_HP_MIC_NO_PRESENCE,
 	CXT_PINCFG_SWS_JS201D,
+	CXT_PINCFG_LENOVO_IDEAPAD_SLIM5_16AKP10,
 	CXT_PINCFG_TOP_SPEAKER,
 	CXT_FIXUP_HP_A_U,
 	CXT_FIXUP_ACER_SWIFT_HP,
@@ -826,6 +827,12 @@ static const struct hda_pintbl cxt_pincfg_lemote[] = {
 	{}
 };
 
+/* Lenovo IdeaPad Slim 5 16AKP10 with SN6140 */
+static const struct hda_pintbl cxt_pincfg_lenovo_ideapad_slim5_16akp10[] = {
+	{ 0x1a, 0x95a60130 }, /* Internal mic, fixed/always-connected */
+	{}
+};
+
 /* SuoWoSi/South-holding JS201D with sn6140 */
 static const struct hda_pintbl cxt_pincfg_sws_js201d[] = {
 	{ 0x16, 0x03211040 }, /* hp out */
@@ -1006,6 +1013,10 @@ static const struct hda_fixup cxt_fixups[] = {
 		.type = HDA_FIXUP_PINS,
 		.v.pins = cxt_pincfg_sws_js201d,
 	},
+	[CXT_PINCFG_LENOVO_IDEAPAD_SLIM5_16AKP10] = {
+		.type = HDA_FIXUP_PINS,
+		.v.pins = cxt_pincfg_lenovo_ideapad_slim5_16akp10,
+	},
 	[CXT_PINCFG_TOP_SPEAKER] = {
 		.type = HDA_FIXUP_PINS,
 		.v.pins = (const struct hda_pintbl[]) {

sound/hda/codecs/conexant.c static const struct hda_quirk cxt5066_fixups[] = { · line 1133

Quoted 7 lines
sound/hda/codecs/conexant.c +1 -0
@@ -1116,6 +1127,7 @@ static const struct hda_quirk cxt5066_fixups[] = {
 	SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo IdeaPad Z560", CXT_FIXUP_MUTE_LED_EAPD),
 	SND_PCI_QUIRK(0x17aa, 0x3905, "Lenovo G50-30", CXT_FIXUP_STEREO_DMIC),
 	SND_PCI_QUIRK(0x17aa, 0x390b, "Lenovo G50-80", CXT_FIXUP_STEREO_DMIC),
+	SND_PCI_QUIRK(0x17aa, 0x38b6, "Lenovo IdeaPad Slim 5 16AKP10", CXT_PINCFG_LENOVO_IDEAPAD_SLIM5_16AKP10),
 	SND_PCI_QUIRK(0x17aa, 0x3975, "Lenovo U300s", CXT_FIXUP_STEREO_DMIC),
 	/* NOTE: we'd need to extend the quirk for 17aa:3977 as the same
 	 * PCI SSID is used on multiple Lenovo models

The table is sorted in PCI SSID order. Please try to put the entry at the right position.

thanks,

Takashi

#2 lore raw

PATCH v2 1/1 ALSA: hda/conexant: Add pin config quirk for Lenovo IdeaPad Slim 5 16AKP10

The Lenovo IdeaPad Slim 5 16AKP10 (PCI SSID 17aa:38b6) uses the Conexant SN6140 codec. The internal microphone is on pin 0x1a but the BIOS configures it with pin default 0x95a60120, which includes a jack detection bit that causes the kernel to treat it as an unplugged external mic rather than a fixed internal mic.

Add a pin config quirk that overrides pin 0x1a to 0x95a60130, setting the connectivity bits to indicate a fixed/always-connected device. This allows the internal microphone to be correctly identified and used.

---
 sound/hda/codecs/conexant.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

Changes in v2:
- Move the quirk table entry to the correct position in PCI SSID order (between 0x38af and 0x3905), as pointed out by Takashi Iwai.

sound/hda/codecs/conexant.c +12 -0
index e3b6aaabe..3d9226276 100644
@@ -291,6 +291,7 @@ enum {
 	CXT_FIXUP_HEADSET_MIC,
 	CXT_FIXUP_HP_MIC_NO_PRESENCE,
 	CXT_PINCFG_SWS_JS201D,
+	CXT_PINCFG_LENOVO_IDEAPAD_SLIM5_16AKP10,
 	CXT_PINCFG_TOP_SPEAKER,
 	CXT_FIXUP_HP_A_U,
 	CXT_FIXUP_ACER_SWIFT_HP,
@@ -826,6 +827,12 @@ static const struct hda_pintbl cxt_pincfg_lemote[] = {
 	{}
 };
 
+/* Lenovo IdeaPad Slim 5 16AKP10 with SN6140 */
+static const struct hda_pintbl cxt_pincfg_lenovo_ideapad_slim5_16akp10[] = {
+	{ 0x1a, 0x95a60130 }, /* Internal mic, fixed/always-connected */
+	{}
+};
+
 /* SuoWoSi/South-holding JS201D with sn6140 */
 static const struct hda_pintbl cxt_pincfg_sws_js201d[] = {
 	{ 0x16, 0x03211040 }, /* hp out */
@@ -1006,6 +1013,10 @@ static const struct hda_fixup cxt_fixups[] = {
 		.type = HDA_FIXUP_PINS,
 		.v.pins = cxt_pincfg_sws_js201d,
 	},
+	[CXT_PINCFG_LENOVO_IDEAPAD_SLIM5_16AKP10] = {
+		.type = HDA_FIXUP_PINS,
+		.v.pins = cxt_pincfg_lenovo_ideapad_slim5_16akp10,
+	},
 	[CXT_PINCFG_TOP_SPEAKER] = {
 		.type = HDA_FIXUP_PINS,
 		.v.pins = (const struct hda_pintbl[]) {
@@ -1114,6 +1125,7 @@ static const struct hda_quirk cxt5066_fixups[] = {
 	SND_PCI_QUIRK(0x17aa, 0x21da, "Lenovo X220", CXT_PINCFG_LENOVO_TP410),
 	SND_PCI_QUIRK(0x17aa, 0x21db, "Lenovo X220-tablet", CXT_PINCFG_LENOVO_TP410),
 	SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo IdeaPad Z560", CXT_FIXUP_MUTE_LED_EAPD),
+	SND_PCI_QUIRK(0x17aa, 0x38b6, "Lenovo IdeaPad Slim 5 16AKP10", CXT_PINCFG_LENOVO_IDEAPAD_SLIM5_16AKP10),
 	SND_PCI_QUIRK(0x17aa, 0x3905, "Lenovo G50-30", CXT_FIXUP_STEREO_DMIC),
 	SND_PCI_QUIRK(0x17aa, 0x390b, "Lenovo G50-80", CXT_FIXUP_STEREO_DMIC),
 	SND_PCI_QUIRK(0x17aa, 0x3975, "Lenovo U300s", CXT_FIXUP_STEREO_DMIC),
Signature · 1 line
2.53.0
#3 lore raw
Quoted 7 lines · Galen Hassen

The Lenovo IdeaPad Slim 5 16AKP10 (PCI SSID 17aa:38b6) uses the Conexant SN6140 codec. The internal microphone is on pin 0x1a but the BIOS configures it with pin default 0x95a60120, which includes a jack detection bit that causes the kernel to treat it as an unplugged external mic rather than a fixed internal mic.

Quoted 6 lines

Add a pin config quirk that overrides pin 0x1a to 0x95a60130, setting the connectivity bits to indicate a fixed/always-connected device. This allows the internal microphone to be correctly identified and used.

Applied now. Thanks.

Takashi