i2c: acpi: Force ELAN1300 touchpads to 100 kHz
Subsystems (4)
PATCH 1/1 i2c: acpi: Force ELAN1300 touchpads to 100 kHz
The ELAN1300 touchpad with HID ID 04F3:3104 on the ASUS VivoBook X513UA_KM513UA exhibits severe pointer jumps and erratic movement when the I2C bus operates at 400 kHz.
The system DSDT describes the touchpad using an I2cSerialBusV2 resource with a speed of 0x00061A80, corresponding to 400 kHz, on the AMDI0010:03 controller.
At this speed, libinput repeatedly reports:
kernel bug: Touch jump detected and discarded
Add ELAN1300 to i2c_acpi_force_100khz_device_ids so that it operates at 100 kHz.
Before the change, nine touch-jump events were recorded, with additional messages suppressed by libinput's rate limiter. With the bus forced to 100 kHz, no touch-jump events have been observed and the touchpad operates normally.
The affected system uses BIOS X513UA.319 dated 2023-05-09.
--- drivers/i2c/i2c-core-acpi.c | 1 + 1 file changed, 1 insertion(+)
drivers/i2c/i2c-core-acpi.c +1 -0
@@ -376,6 +376,7 @@ static const struct acpi_device_id i2c_acpi_force_100khz_device_ids[] = { { "DLL0945", 0 }, { "ELAN0678", 0 }, { "ELAN06FA", 0 }, + { "ELAN1300", 0 }, {} };
Signature · 1 line
2.54.0
Quoted 15 lines · Abhijeeth Babu
The ELAN1300 touchpad with HID ID 04F3:3104 on the ASUS VivoBook
X513UA_KM513UAexhibits severe pointer jumps and erratic movement when the I2C bus operates at 400 kHz.The system DSDT describes the touchpad using an I2cSerialBusV2 resource with a speed of
0x00061A80, corresponding to 400 kHz, on the AMDI0010:03 controller.At this speed, libinput repeatedly reports:
kernel bug: Touch jump detected and discarded
Add ELAN1300 to
i2c_acpi_force_100khz_device_idsso that it operates at 100 kHz.
Quoted 8 lines
Before the change, nine touch-jump events were recorded, with additional messages suppressed by libinput's rate limiter. With the bus forced to 100 kHz, no touch-jump events have been observed and the touchpad operates normally.
The affected system uses BIOS X513UA.319 dated 2023-05-09.
Signed-off-by Abhijeeth Babu <[email protected]>
Hi Abhijeeth,
Quoted 15 lines · Abhijeeth Babu
The ELAN1300 touchpad with HID ID 04F3:3104 on the ASUS VivoBook
X513UA_KM513UAexhibits severe pointer jumps and erratic movement when the I2C bus operates at 400 kHz.The system DSDT describes the touchpad using an I2cSerialBusV2 resource with a speed of
0x00061A80, corresponding to 400 kHz, on the AMDI0010:03 controller.At this speed, libinput repeatedly reports:
kernel bug: Touch jump detected and discarded
Add ELAN1300 to
i2c_acpi_force_100khz_device_idsso that it operates at 100 kHz.
Quoted 8 lines
Before the change, nine touch-jump events were recorded, with additional messages suppressed by libinput's rate limiter. With the bus forced to 100 kHz, no touch-jump events have been observed and the touchpad operates normally.
The affected system uses BIOS X513UA.319 dated 2023-05-09.
Signed-off-by Abhijeeth Babu <[email protected]>
merged to i2c/i2c-for-7.3.
Thanks,
Andi