Skip to contentSkip to conversation

net/mlx5: fix counter TAILQ race between free and query callback

PATCH Superseded Laaahu 3 participants 10 messages Jun 4 – Jun 24 Network drivers

lore
Share & tools
lore

Laaahu

author
#0 lore raw

PATCH 1/1 net/mlx5: fix counter TAILQ race between free and query callback

From: lilinhu <[email protected]>

flow_dv_counter_free() inserts counters into pool->counters[pool->query_gen] under pool->csl. Meanwhile, mlx5_flow_async_pool_query_handle() moves counters from pool->counters[query_gen ^ 1] to the global free list via TAILQ_CONCAT while holding only cmng->csl, not pool->csl.

The comment in flow_dv_counter_free() claims the lock is not needed because the query callback and the release function operate on different lists. That holds only if the free path always observes the up-to-date query_gen. It can be violated:

1. A counter free thread (non-PMD, e.g. OVS offload thread) reads pool->query_gen == 0 and is about to insert into counters[0].
2. The free thread is preempted by the OS scheduler; it is a regular pthread, not pinned to a core.
3. The eal-intr-thread alarm fires: query_gen++ (now 1) and the async query is sent.
4. Hardware completes the query and the callback runs TAILQ_CONCAT on counters[0] (= query_gen ^ 1).
5. The free thread resumes and runs TAILQ_INSERT_TAIL on counters[0] concurrently with step 4 on another core.

Because the two paths take different locks, TAILQ_INSERT_TAIL and TAILQ_CONCAT run concurrently on the same list with no synchronization and corrupt it: the pool-local list ends up with a NULL head but a dangling tqh_last, and the global free list tail no longer points to the real tail. The just-freed counter and every counter inserted afterwards become unreachable and are leaked.

Non-PMD threads can be preempted for hundreds of microseconds under CPU pressure, which is well within the async query round-trip time, so the window is reachable in practice.

Fix it by taking pool->csl in the query completion callback before operating on pool->counters[query_gen], serializing the CONCAT with any concurrent INSERT. The lock is taken once per pool per query completion in the eal-intr-thread context, not on the datapath, so the cost is negligible. Lock order is pool->csl then cmng->csl, matching all other sites.

Also handle the error path: previously the counters accumulated in pool->counters[query_gen] were abandoned when a query failed. Move them back to the global free list to avoid a leak on persistent query failures.

Fixes ac79183dc6f7 ("net/mlx5: optimize free counter lookup")
---
 drivers/net/mlx5/mlx5_flow.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)
drivers/net/mlx5/mlx5_flow.c +23 -0
index 915ea29a5a..20aad87f5d 100644
@@ -9904,6 +9904,20 @@ mlx5_flow_async_pool_query_handle(struct mlx5_dev_ctx_shared *sh,
 
 	if (unlikely(status)) {
 		raw_to_free = pool->raw_hw;
+		/*
+		 * The query failed, so the freed counters accumulated in the
+		 * old-gen list during this round would otherwise be stranded.
+		 * Move them back to the global free list to avoid a leak when
+		 * queries fail persistently.
+		 */
+		if (!TAILQ_EMPTY(&pool->counters[query_gen])) {
+			rte_spinlock_lock(&pool->csl);
+			rte_spinlock_lock(&cmng->csl[cnt_type]);
+			TAILQ_CONCAT(&cmng->counters[cnt_type],
+				     &pool->counters[query_gen], next);
+			rte_spinlock_unlock(&cmng->csl[cnt_type]);
+			rte_spinlock_unlock(&pool->csl);
+		}
 	} else {
 		raw_to_free = pool->raw;
 		if (pool->is_aged)
@@ -9913,11 +9927,20 @@ mlx5_flow_async_pool_query_handle(struct mlx5_dev_ctx_shared *sh,
 		rte_spinlock_unlock(&pool->sl);
 		/* Be sure the new raw counters data is updated in memory. */
 		rte_io_wmb();
+		/*
+		 * A counter free thread may have read a stale query_gen
+		 * before the generation was flipped and could still be
+		 * inserting into this same old-gen list. Hold pool->csl to
+		 * serialize TAILQ_CONCAT with that TAILQ_INSERT_TAIL and
+		 * avoid corrupting the list.
+		 */
 		if (!TAILQ_EMPTY(&pool->counters[query_gen])) {
+			rte_spinlock_lock(&pool->csl);
 			rte_spinlock_lock(&cmng->csl[cnt_type]);
 			TAILQ_CONCAT(&cmng->counters[cnt_type],
 				     &pool->counters[query_gen], next);
 			rte_spinlock_unlock(&cmng->csl[cnt_type]);
+			rte_spinlock_unlock(&pool->csl);
 		}
 	}
 	LIST_INSERT_HEAD(&sh->sws_cmng.free_stat_raws, raw_to_free, next);
Signature · 1 line
2.39.3 (Apple Git-146)
Acked-by on v1 1/1
#1 lore raw

Hi,

Thank you for the contribution.

Quoted 47 lines · Laaahu

From: lilinhu <[email protected]>

flow_dv_counter_free() inserts counters into pool->counters[pool->query_gen] under pool->csl. Meanwhile, mlx5_flow_async_pool_query_handle() moves counters from pool->counters[query_gen ^ 1] to the global free list via TAILQ_CONCAT while holding only cmng->csl, not pool->csl.

The comment in flow_dv_counter_free() claims the lock is not needed because the query callback and the release function operate on different lists. That holds only if the free path always observes the up-to-date query_gen. It can be violated:

1. A counter free thread (non-PMD, e.g. OVS offload thread) reads pool->query_gen == 0 and is about to insert into counters[0].
2. The free thread is preempted by the OS scheduler; it is a regular pthread, not pinned to a core.
3. The eal-intr-thread alarm fires: query_gen++ (now 1) and the async query is sent.
4. Hardware completes the query and the callback runs TAILQ_CONCAT on counters[0] (= query_gen ^ 1).
5. The free thread resumes and runs TAILQ_INSERT_TAIL on counters[0] concurrently with step 4 on another core.

Because the two paths take different locks, TAILQ_INSERT_TAIL and TAILQ_CONCAT run concurrently on the same list with no synchronization and corrupt it: the pool-local list ends up with a NULL head but a dangling tqh_last, and the global free list tail no longer points to the real tail. The just-freed counter and every counter inserted afterwards become unreachable and are leaked.

Non-PMD threads can be preempted for hundreds of microseconds under CPU pressure, which is well within the async query round-trip time, so the window is reachable in practice.

Fix it by taking pool->csl in the query completion callback before operating on pool->counters[query_gen], serializing the CONCAT with any concurrent INSERT. The lock is taken once per pool per query completion in the eal-intr-thread context, not on the datapath, so the cost is negligible. Lock order is pool->csl then cmng->csl, matching all other sites.

Also handle the error path: previously the counters accumulated in pool->counters[query_gen] were abandoned when a query failed. Move them back to the global free list to avoid a leak on persistent query failures.

Quoted 4 lines
Fixes ac79183dc6f7 ("net/mlx5: optimize free counter lookup")

Code looks good to me.

DPDK community uses Signed-off-by to indicate
Developer's Certificate of Origin:
https://developercertificate.org/

This requires full name in the Signed-off-by tag. Could you please help with providing us with your full name in English alphabet?

Best regards,
Dariusz Sosnowski

author
#2 lore raw

PATCH v2 1/1 net/mlx5: fix counter TAILQ race between free and query callback

In reply to Laaahu

flow_dv_counter_free() inserts counters into pool->counters[pool->query_gen] under pool->csl. Meanwhile, mlx5_flow_async_pool_query_handle() moves counters from pool->counters[query_gen ^ 1] to the global free list via TAILQ_CONCAT while holding only cmng->csl, not pool->csl.

The comment in flow_dv_counter_free() claims the lock is not needed because the query callback and the release function operate on different lists. That holds only if the free path always observes the up-to-date query_gen. It can be violated:

1. A counter free thread (non-PMD, e.g. OVS offload thread) reads pool->query_gen == 0 and is about to insert into counters[0].
2. The free thread is preempted by the OS scheduler; it is a regular pthread, not pinned to a core.
3. The eal-intr-thread alarm fires: query_gen++ (now 1) and the async query is sent.
4. Hardware completes the query and the callback runs TAILQ_CONCAT on counters[0] (= query_gen ^ 1).
5. The free thread resumes and runs TAILQ_INSERT_TAIL on counters[0] concurrently with step 4 on another core.

Because the two paths take different locks, TAILQ_INSERT_TAIL and TAILQ_CONCAT run concurrently on the same list with no synchronization and corrupt it: the pool-local list ends up with a NULL head but a dangling tqh_last, and the global free list tail no longer points to the real tail. The just-freed counter and every counter inserted afterwards become unreachable and are leaked.

Non-PMD threads can be preempted for hundreds of microseconds under CPU pressure, which is well within the async query round-trip time, so the window is reachable in practice.

Fix it by taking pool->csl in the query completion callback before operating on pool->counters[query_gen], serializing the CONCAT with any concurrent INSERT. The lock is taken once per pool per query completion in the eal-intr-thread context, not on the datapath, so the cost is negligible. Lock order is pool->csl then cmng->csl, matching all other sites.

Also handle the error path: previously the counters accumulated in pool->counters[query_gen] were abandoned when a query failed. Move them back to the global free list to avoid a leak on persistent query failures.

Fixes ac79183dc6f7 ("net/mlx5: optimize free counter lookup")
---
 drivers/net/mlx5/mlx5_flow.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)
drivers/net/mlx5/mlx5_flow.c +23 -0
index 915ea29a5a..20aad87f5d 100644
@@ -9904,6 +9904,20 @@ mlx5_flow_async_pool_query_handle(struct mlx5_dev_ctx_shared *sh,
 
 	if (unlikely(status)) {
 		raw_to_free = pool->raw_hw;
+		/*
+		 * The query failed, so the freed counters accumulated in the
+		 * old-gen list during this round would otherwise be stranded.
+		 * Move them back to the global free list to avoid a leak when
+		 * queries fail persistently.
+		 */
+		if (!TAILQ_EMPTY(&pool->counters[query_gen])) {
+			rte_spinlock_lock(&pool->csl);
+			rte_spinlock_lock(&cmng->csl[cnt_type]);
+			TAILQ_CONCAT(&cmng->counters[cnt_type],
+				     &pool->counters[query_gen], next);
+			rte_spinlock_unlock(&cmng->csl[cnt_type]);
+			rte_spinlock_unlock(&pool->csl);
+		}
 	} else {
 		raw_to_free = pool->raw;
 		if (pool->is_aged)
@@ -9913,11 +9927,20 @@ mlx5_flow_async_pool_query_handle(struct mlx5_dev_ctx_shared *sh,
 		rte_spinlock_unlock(&pool->sl);
 		/* Be sure the new raw counters data is updated in memory. */
 		rte_io_wmb();
+		/*
+		 * A counter free thread may have read a stale query_gen
+		 * before the generation was flipped and could still be
+		 * inserting into this same old-gen list. Hold pool->csl to
+		 * serialize TAILQ_CONCAT with that TAILQ_INSERT_TAIL and
+		 * avoid corrupting the list.
+		 */
 		if (!TAILQ_EMPTY(&pool->counters[query_gen])) {
+			rte_spinlock_lock(&pool->csl);
 			rte_spinlock_lock(&cmng->csl[cnt_type]);
 			TAILQ_CONCAT(&cmng->counters[cnt_type],
 				     &pool->counters[query_gen], next);
 			rte_spinlock_unlock(&cmng->csl[cnt_type]);
+			rte_spinlock_unlock(&pool->csl);
 		}
 	}
 	LIST_INSERT_HEAD(&sh->sws_cmng.free_stat_raws, raw_to_free, next);
Signature · 1 line
2.39.3 (Apple Git-146)
Acked-by on v2 1/1
#3 lore raw
Quoted 50 lines

-----Original Message-----
From: Linhu Li <[email protected]>
Sent: Monday, June 8, 2026 3:26 PM
To: [email protected]
Cc: [email protected]; Dariusz Sosnowski <[email protected]>; Linhu Li <[email protected]>
Subject: [PATCH v2] net/mlx5: fix counter TAILQ race between free and query callback

flow_dv_counter_free() inserts counters into pool->counters[pool->query_gen] under pool->csl. Meanwhile, mlx5_flow_async_pool_query_handle() moves counters from pool->counters[query_gen ^ 1] to the global free list via TAILQ_CONCAT while holding only cmng->csl, not pool->csl.

The comment in flow_dv_counter_free() claims the lock is not needed because the query callback and the release function operate on different lists. That holds only if the free path always observes the up-to-date query_gen. It can be violated:

1. A counter free thread (non-PMD, e.g. OVS offload thread) reads pool->query_gen == 0 and is about to insert into counters[0].
2. The free thread is preempted by the OS scheduler; it is a regular pthread, not pinned to a core.
3. The eal-intr-thread alarm fires: query_gen++ (now 1) and the async query is sent.
4. Hardware completes the query and the callback runs TAILQ_CONCAT on counters[0] (= query_gen ^ 1).
5. The free thread resumes and runs TAILQ_INSERT_TAIL on counters[0] concurrently with step 4 on another core.

Because the two paths take different locks, TAILQ_INSERT_TAIL and TAILQ_CONCAT run concurrently on the same list with no synchronization and corrupt it: the pool-local list ends up with a NULL head but a dangling tqh_last, and the global free list tail no longer points to the real tail. The just- freed counter and every counter inserted afterwards become unreachable and are leaked.

Non-PMD threads can be preempted for hundreds of microseconds under CPU pressure, which is well within the async query round-trip time, so the window is reachable in practice.

Fix it by taking pool->csl in the query completion callback before operating on pool->counters[query_gen], serializing the CONCAT with any concurrent INSERT. The lock is taken once per pool per query completion in the eal-intr- thread context, not on the datapath, so the cost is negligible. Lock order is pool->csl then cmng->csl, matching all other sites.

Quoted 8 lines

Also handle the error path: previously the counters accumulated in pool->counters[query_gen] were abandoned when a query failed. Move them back to the global free list to avoid a leak on persistent query failures.

Fixes ac79183dc6f7 ("net/mlx5: optimize free counter lookup")
Acked-by on v2 1/1
#4 lore raw
In reply to Linhu Li
Quoted 45 lines · Linhu Li

flow_dv_counter_free() inserts counters into pool->counters[pool->query_gen] under pool->csl. Meanwhile, mlx5_flow_async_pool_query_handle() moves counters from pool->counters[query_gen ^ 1] to the global free list via TAILQ_CONCAT while holding only cmng->csl, not pool->csl.

The comment in flow_dv_counter_free() claims the lock is not needed because the query callback and the release function operate on different lists. That holds only if the free path always observes the up-to-date query_gen. It can be violated:

1. A counter free thread (non-PMD, e.g. OVS offload thread) reads pool->query_gen == 0 and is about to insert into counters[0].
2. The free thread is preempted by the OS scheduler; it is a regular pthread, not pinned to a core.
3. The eal-intr-thread alarm fires: query_gen++ (now 1) and the async query is sent.
4. Hardware completes the query and the callback runs TAILQ_CONCAT on counters[0] (= query_gen ^ 1).
5. The free thread resumes and runs TAILQ_INSERT_TAIL on counters[0] concurrently with step 4 on another core.

Because the two paths take different locks, TAILQ_INSERT_TAIL and TAILQ_CONCAT run concurrently on the same list with no synchronization and corrupt it: the pool-local list ends up with a NULL head but a dangling tqh_last, and the global free list tail no longer points to the real tail. The just-freed counter and every counter inserted afterwards become unreachable and are leaked.

Non-PMD threads can be preempted for hundreds of microseconds under CPU pressure, which is well within the async query round-trip time, so the window is reachable in practice.

Fix it by taking pool->csl in the query completion callback before operating on pool->counters[query_gen], serializing the CONCAT with any concurrent INSERT. The lock is taken once per pool per query completion in the eal-intr-thread context, not on the datapath, so the cost is negligible. Lock order is pool->csl then cmng->csl, matching all other sites.

Also handle the error path: previously the counters accumulated in pool->counters[query_gen] were abandoned when a query failed. Move them back to the global free list to avoid a leak on persistent query failures.

Quoted 4 lines
Fixes ac79183dc6f7 ("net/mlx5: optimize free counter lookup")
author
#5 lore raw

PATCH v3 1/1 net/mlx5: fix counter TAILQ race between free and query callback

In reply to Laaahu

flow_dv_counter_free() inserts counters into pool->counters[pool->query_gen] under pool->csl. Meanwhile, mlx5_flow_async_pool_query_handle() moves counters from pool->counters[query_gen ^ 1] to the global free list via TAILQ_CONCAT while holding only cmng->csl, not pool->csl.

The comment in flow_dv_counter_free() claims the lock is not needed because the query callback and the release function operate on different lists. That holds only if the free path always observes the up-to-date query_gen. It can be violated:

1. A counter free thread (non-PMD, e.g. OVS offload thread) reads pool->query_gen == 0 and is about to insert into counters[0].
2. The free thread is preempted by the OS scheduler; it is a regular pthread, not pinned to a core.
3. The eal-intr-thread alarm fires: query_gen++ (now 1) and the async query is sent.
4. Hardware completes the query and the callback runs TAILQ_CONCAT on counters[0] (= query_gen ^ 1).
5. The free thread resumes and runs TAILQ_INSERT_TAIL on counters[0] concurrently with step 4 on another core.

Because the two paths take different locks, TAILQ_INSERT_TAIL and TAILQ_CONCAT run concurrently on the same list with no synchronization and corrupt it: the pool-local list ends up with a NULL head but a dangling tqh_last, and the global free list tail no longer points to the real tail. The just- freed counter and every counter inserted afterwards become unreachable and are leaked.

Non-PMD threads can be preempted for hundreds of microseconds under CPU pressure, which is well within the async query round-trip time, so the window is reachable in practice.

Fix it by taking pool->csl in the query completion callback before operating on pool->counters[query_gen], serializing the CONCAT with any concurrent INSERT. The lock is taken once per pool per query completion in the eal-intr- thread context, not on the datapath, so the cost is negligible. Lock order is pool->csl then cmng->csl, matching all other sites.

Also handle the error path: previously the counters accumulated in pool->counters[query_gen] were abandoned when a query failed. Move them back to the global free list to avoid a leak on persistent query failures.

Fixes ac79183dc6f7 ("net/mlx5: optimize free counter lookup")
---
 doc/guides/rel_notes/release_26_07.rst | 21 +++++++++++++++++
 drivers/net/mlx5/mlx5_flow.c           | 31 ++++++++++++++++++++++++++
 2 files changed, 52 insertions(+)
doc/guides/rel_notes/release_26_07.rst +21 -0
index b8a3e2ced9..30a9564884 100644
@@ -153,6 +153,27 @@ ABI Changes
 * No ABI change that would break compatibility with 25.11.
 
 
+Fixed Issues
+------------
+
+.. This section should contain fixed issues in this release. Sample format:
+
+   * **Add a title in the past tense with a full stop.**
+
+     Add a short 1-2 sentence description of the fix in the past tense.
+
+   This section is a comment. Do not overwrite or remove it.
+   Also, make sure to start the actual text at the margin.
+   =======================================================
+
+* **net/mlx5: Fixed counter TAILQ race between free and query callback.**
+
+  Fixed a race condition where concurrent counter free operations and async
+  query completions could corrupt the counter free list, causing counter leaks.
+  The issue occurred when non-PMD threads were preempted between reading
+  ``query_gen`` and inserting into the counter list.
+
+
 Known Issues
 ------------
 
drivers/net/mlx5/mlx5_flow.c +31 -0
index 915ea29a5a..2f785d58ec 100644
@@ -9893,6 +9893,13 @@ void
 mlx5_flow_async_pool_query_handle(struct mlx5_dev_ctx_shared *sh,
 				  uint64_t async_id, int status)
 {
+	/*
+	 * Handle async counter pool query completion.
+	 * query_gen is flipped each round: freed counters go into [query_gen],
+	 * while this callback moves [query_gen ^ 1] to the global free list.
+	 * pool->csl must be held when operating on pool->counters[] to serialize
+	 * with concurrent free-path insertions.
+	 */
 	struct mlx5_flow_counter_pool *pool =
 		(struct mlx5_flow_counter_pool *)(uintptr_t)async_id;
 	struct mlx5_counter_stats_raw *raw_to_free;
@@ -9904,6 +9911,21 @@ mlx5_flow_async_pool_query_handle(struct mlx5_dev_ctx_shared *sh,
 
 	if (unlikely(status)) {
 		raw_to_free = pool->raw_hw;
+		/*
+		 * The query failed, so the freed counters accumulated
+		 * in the old-gen list would otherwise be stranded.
+		 * Move them back to the global free list. This is safe
+		 * for both transient and persistent failures: the
+		 * counters are still valid and can be reused.
+		 */
+		if (!TAILQ_EMPTY(&pool->counters[query_gen])) {
+			rte_spinlock_lock(&pool->csl);
+			rte_spinlock_lock(&cmng->csl[cnt_type]);
+			TAILQ_CONCAT(&cmng->counters[cnt_type],
+				     &pool->counters[query_gen], next);
+			rte_spinlock_unlock(&cmng->csl[cnt_type]);
+			rte_spinlock_unlock(&pool->csl);
+		}
 	} else {
 		raw_to_free = pool->raw;
 		if (pool->is_aged)
@@ -9913,11 +9935,20 @@ mlx5_flow_async_pool_query_handle(struct mlx5_dev_ctx_shared *sh,
 		rte_spinlock_unlock(&pool->sl);
 		/* Be sure the new raw counters data is updated in memory. */
 		rte_io_wmb();
+		/*
+		 * A counter free thread may have read a stale query_gen
+		 * before the generation was flipped and could still be
+		 * inserting into this same old-gen list. Hold pool->csl to
+		 * serialize TAILQ_CONCAT with that TAILQ_INSERT_TAIL and
+		 * avoid corrupting the list.
+		 */
 		if (!TAILQ_EMPTY(&pool->counters[query_gen])) {
+			rte_spinlock_lock(&pool->csl);
 			rte_spinlock_lock(&cmng->csl[cnt_type]);
 			TAILQ_CONCAT(&cmng->counters[cnt_type],
 				     &pool->counters[query_gen], next);
 			rte_spinlock_unlock(&cmng->csl[cnt_type]);
+			rte_spinlock_unlock(&pool->csl);
 		}
 	}
 	LIST_INSERT_HEAD(&sh->sws_cmng.free_stat_raws, raw_to_free, next);
Signature · 1 line
2.39.3 (Apple Git-146)
author
#6 lore raw

PATCH v4 1/1 net/mlx5: fix counter TAILQ race between free and query callback

In reply to Laaahu

flow_dv_counter_free() inserts counters into pool->counters[pool->query_gen] under pool->csl. Meanwhile, mlx5_flow_async_pool_query_handle() moves counters from pool->counters[query_gen ^ 1] to the global free list via TAILQ_CONCAT while holding only cmng->csl, not pool->csl.

The comment in flow_dv_counter_free() claims the lock is not needed because the query callback and the release function operate on different lists. That holds only if the free path always observes the up-to-date query_gen. It can be violated:

1. A counter free thread (non-PMD, e.g. OVS offload thread) reads pool->query_gen == 0 and is about to insert into counters[0].
2. The free thread is preempted by the OS scheduler; it is a regular pthread, not pinned to a core.
3. The eal-intr-thread alarm fires: query_gen++ (now 1) and the async query is sent.
4. Hardware completes the query and the callback runs TAILQ_CONCAT on counters[0] (= query_gen ^ 1).
5. The free thread resumes and runs TAILQ_INSERT_TAIL on counters[0] concurrently with step 4 on another core.

Because the two paths take different locks, TAILQ_INSERT_TAIL and TAILQ_CONCAT run concurrently on the same list with no synchronization and corrupt it: the pool-local list ends up with a NULL head but a dangling tqh_last, and the global free list tail no longer points to the real tail. The just-freed counter and every counter inserted afterwards become unreachable and are leaked.

Non-PMD threads can be preempted for hundreds of microseconds under CPU pressure, which is well within the async query round-trip time, so the window is reachable in practice.

Fix it by taking pool->csl in the query completion callback before operating on pool->counters[query_gen], serializing the CONCAT with any concurrent INSERT. The lock is taken once per pool per query completion in the eal-intr-thread context, not on the datapath, so the cost is negligible. Lock order is pool->csl then cmng->csl, matching all other sites.

Also handle the error path: previously the counters accumulated in pool->counters[query_gen] were abandoned when a query failed. Move them back to the global free list to avoid a leak on persistent query failures.

Fixes ac79183dc6f7 ("net/mlx5: optimize free counter lookup")
---
 doc/guides/rel_notes/release_26_07.rst | 21 +++++++++++++++++
 drivers/net/mlx5/mlx5_flow.c           | 31 ++++++++++++++++++++++++++
 2 files changed, 52 insertions(+)
doc/guides/rel_notes/release_26_07.rst +21 -0
index b8a3e2ced9..30a9564884 100644
@@ -153,6 +153,27 @@ ABI Changes
 * No ABI change that would break compatibility with 25.11.
 
 
+Fixed Issues
+------------
+
+.. This section should contain fixed issues in this release. Sample format:
+
+   * **Add a title in the past tense with a full stop.**
+
+     Add a short 1-2 sentence description of the fix in the past tense.
+
+   This section is a comment. Do not overwrite or remove it.
+   Also, make sure to start the actual text at the margin.
+   =======================================================
+
+* **net/mlx5: Fixed counter TAILQ race between free and query callback.**
+
+  Fixed a race condition where concurrent counter free operations and async
+  query completions could corrupt the counter free list, causing counter leaks.
+  The issue occurred when non-PMD threads were preempted between reading
+  ``query_gen`` and inserting into the counter list.
+
+
 Known Issues
 ------------
 
drivers/net/mlx5/mlx5_flow.c +31 -0
index 915ea29a5a..2f785d58ec 100644
@@ -9893,6 +9893,13 @@ void
 mlx5_flow_async_pool_query_handle(struct mlx5_dev_ctx_shared *sh,
 				  uint64_t async_id, int status)
 {
+	/*
+	 * Handle async counter pool query completion.
+	 * query_gen is flipped each round: freed counters go into [query_gen],
+	 * while this callback moves [query_gen ^ 1] to the global free list.
+	 * pool->csl must be held when operating on pool->counters[] to serialize
+	 * with concurrent free-path insertions.
+	 */
 	struct mlx5_flow_counter_pool *pool =
 		(struct mlx5_flow_counter_pool *)(uintptr_t)async_id;
 	struct mlx5_counter_stats_raw *raw_to_free;
@@ -9904,6 +9911,21 @@ mlx5_flow_async_pool_query_handle(struct mlx5_dev_ctx_shared *sh,
 
 	if (unlikely(status)) {
 		raw_to_free = pool->raw_hw;
+		/*
+		 * The query failed, so the freed counters accumulated
+		 * in the old-gen list would otherwise be stranded.
+		 * Move them back to the global free list. This is safe
+		 * for both transient and persistent failures: the
+		 * counters are still valid and can be reused.
+		 */
+		if (!TAILQ_EMPTY(&pool->counters[query_gen])) {
+			rte_spinlock_lock(&pool->csl);
+			rte_spinlock_lock(&cmng->csl[cnt_type]);
+			TAILQ_CONCAT(&cmng->counters[cnt_type],
+				     &pool->counters[query_gen], next);
+			rte_spinlock_unlock(&cmng->csl[cnt_type]);
+			rte_spinlock_unlock(&pool->csl);
+		}
 	} else {
 		raw_to_free = pool->raw;
 		if (pool->is_aged)
@@ -9913,11 +9935,20 @@ mlx5_flow_async_pool_query_handle(struct mlx5_dev_ctx_shared *sh,
 		rte_spinlock_unlock(&pool->sl);
 		/* Be sure the new raw counters data is updated in memory. */
 		rte_io_wmb();
+		/*
+		 * A counter free thread may have read a stale query_gen
+		 * before the generation was flipped and could still be
+		 * inserting into this same old-gen list. Hold pool->csl to
+		 * serialize TAILQ_CONCAT with that TAILQ_INSERT_TAIL and
+		 * avoid corrupting the list.
+		 */
 		if (!TAILQ_EMPTY(&pool->counters[query_gen])) {
+			rte_spinlock_lock(&pool->csl);
 			rte_spinlock_lock(&cmng->csl[cnt_type]);
 			TAILQ_CONCAT(&cmng->counters[cnt_type],
 				     &pool->counters[query_gen], next);
 			rte_spinlock_unlock(&cmng->csl[cnt_type]);
+			rte_spinlock_unlock(&pool->csl);
 		}
 	}
 	LIST_INSERT_HEAD(&sh->sws_cmng.free_stat_raws, raw_to_free, next);
Signature · 1 line
2.39.3 (Apple Git-146)
author
#7 lore raw

PATCH v5 1/1 net/mlx5: fix counter TAILQ race between free and query callback

In reply to Laaahu

flow_dv_counter_free() inserts counters into pool->counters[pool->query_gen] under pool->csl. Meanwhile, mlx5_flow_async_pool_query_handle() moves counters from pool->counters[query_gen ^ 1] to the global free list via TAILQ_CONCAT while holding only cmng->csl, not pool->csl.

The comment in flow_dv_counter_free() claims the lock is not needed because the query callback and the release function operate on different lists. That holds only if the free path always observes the up-to-date query_gen. It can be violated:

1. A counter free thread (non-PMD, e.g. OVS offload thread) reads pool->query_gen == 0 and is about to insert into counters[0].
2. The free thread is preempted by the OS scheduler; it is a regular pthread, not pinned to a core.
3. The eal-intr-thread alarm fires: query_gen++ (now 1) and the async query is sent.
4. Hardware completes the query and the callback runs TAILQ_CONCAT on counters[0] (= query_gen ^ 1).
5. The free thread resumes and runs TAILQ_INSERT_TAIL on counters[0] concurrently with step 4 on another core.

Because the two paths take different locks, TAILQ_INSERT_TAIL and TAILQ_CONCAT run concurrently on the same list with no synchronization and corrupt it: the pool-local list ends up with a NULL head but a dangling tqh_last, and the global free list tail no longer points to the real tail. The just-freed counter and every counter inserted afterwards become unreachable and are leaked.

Non-PMD threads can be preempted for hundreds of microseconds under CPU pressure, which is well within the async query round-trip time, so the window is reachable in practice.

Fix it by taking pool->csl in the query completion callback before operating on pool->counters[query_gen], serializing the CONCAT with any concurrent INSERT. The lock is taken once per pool per query completion in the eal-intr-thread context, not on the datapath, so the cost is negligible. Lock order is pool->csl then cmng->csl, matching all other sites.

Also handle the error path: previously the counters accumulated in pool->counters[query_gen] were abandoned when a query failed. Move them back to the global free list to avoid a leak on persistent query failures.

Additionally, fix a second independent race in flow_dv_counter_free():
TAILQ_INSERT_TAIL is passed &pool->counters[pool->query_gen] directly, but the macro evaluates its head argument multiple times. Since pool->query_gen is a volatile bit-field, if mlx5_flow_query_alarm() increments query_gen between two evaluations of the macro, the same insertion can operate on two different lists: the earlier steps update counters[0] while the later steps update counters[1], leaving both lists with inconsistent metadata and leaking the counter. Fix by caching pool->query_gen into a local variable before calling the macro.

Fixes ac79183dc6f7 ("net/mlx5: optimize free counter lookup")

---

v5:
- Added fix for Race 2: cache pool->query_gen into a local variable before TAILQ_INSERT_TAIL to prevent the macro from evaluating the volatile bit-field multiple times and crossing generation lists.
- Updated release notes: moved the fix entry under "Updated NVIDIA mlx5 driver" in New Features instead of using a separate "Fixed Issues" section.

v4:
- Fixed commit log line length over 75 characters.

v3:
- Added release notes entry.
- Added function comment in mlx5_flow_async_pool_query_handle().
- Clarified error path comment to note it is safe for transient failures.

v2:
- Fixed Signed-off-by to use full name.

 doc/guides/rel_notes/release_26_07.rst |  6 +++++
 drivers/net/mlx5/mlx5_flow.c           | 31 ++++++++++++++++++++++++++
 drivers/net/mlx5/mlx5_flow_dv.c        | 12 +++++-----
 3 files changed, 44 insertions(+), 5 deletions(-)
doc/guides/rel_notes/release_26_07.rst +6 -0
index b8a3e2ced9..6c6f0aa696 100644
@@ -90,6 +90,11 @@ New Features
   * Added support for transmitting LLDP packets based on mbuf packet type.
   * Implemented AVX2 context descriptor transmit paths.
 
+* **Updated NVIDIA mlx5 driver.**
+
+  Fixed counter free list corruption when counter free operations race with
+  asynchronous query completions.
+
 * **Updated PCAP ethernet driver.**
 
   * Added support for VLAN insertion and stripping.
@@ -153,6 +158,7 @@ ABI Changes
 * No ABI change that would break compatibility with 25.11.
 
 
+
 Known Issues
 ------------
 
drivers/net/mlx5/mlx5_flow.c +31 -0
index 915ea29a5a..2f785d58ec 100644
@@ -9893,6 +9893,13 @@ void
 mlx5_flow_async_pool_query_handle(struct mlx5_dev_ctx_shared *sh,
 				  uint64_t async_id, int status)
 {
+	/*
+	 * Handle async counter pool query completion.
+	 * query_gen is flipped each round: freed counters go into [query_gen],
+	 * while this callback moves [query_gen ^ 1] to the global free list.
+	 * pool->csl must be held when operating on pool->counters[] to serialize
+	 * with concurrent free-path insertions.
+	 */
 	struct mlx5_flow_counter_pool *pool =
 		(struct mlx5_flow_counter_pool *)(uintptr_t)async_id;
 	struct mlx5_counter_stats_raw *raw_to_free;
@@ -9904,6 +9911,21 @@ mlx5_flow_async_pool_query_handle(struct mlx5_dev_ctx_shared *sh,
 
 	if (unlikely(status)) {
 		raw_to_free = pool->raw_hw;
+		/*
+		 * The query failed, so the freed counters accumulated
+		 * in the old-gen list would otherwise be stranded.
+		 * Move them back to the global free list. This is safe
+		 * for both transient and persistent failures: the
+		 * counters are still valid and can be reused.
+		 */
+		if (!TAILQ_EMPTY(&pool->counters[query_gen])) {
+			rte_spinlock_lock(&pool->csl);
+			rte_spinlock_lock(&cmng->csl[cnt_type]);
+			TAILQ_CONCAT(&cmng->counters[cnt_type],
+				     &pool->counters[query_gen], next);
+			rte_spinlock_unlock(&cmng->csl[cnt_type]);
+			rte_spinlock_unlock(&pool->csl);
+		}
 	} else {
 		raw_to_free = pool->raw;
 		if (pool->is_aged)
@@ -9913,11 +9935,20 @@ mlx5_flow_async_pool_query_handle(struct mlx5_dev_ctx_shared *sh,
 		rte_spinlock_unlock(&pool->sl);
 		/* Be sure the new raw counters data is updated in memory. */
 		rte_io_wmb();
+		/*
+		 * A counter free thread may have read a stale query_gen
+		 * before the generation was flipped and could still be
+		 * inserting into this same old-gen list. Hold pool->csl to
+		 * serialize TAILQ_CONCAT with that TAILQ_INSERT_TAIL and
+		 * avoid corrupting the list.
+		 */
 		if (!TAILQ_EMPTY(&pool->counters[query_gen])) {
+			rte_spinlock_lock(&pool->csl);
 			rte_spinlock_lock(&cmng->csl[cnt_type]);
 			TAILQ_CONCAT(&cmng->counters[cnt_type],
 				     &pool->counters[query_gen], next);
 			rte_spinlock_unlock(&cmng->csl[cnt_type]);
+			rte_spinlock_unlock(&pool->csl);
 		}
 	}
 	LIST_INSERT_HEAD(&sh->sws_cmng.free_stat_raws, raw_to_free, next);
drivers/net/mlx5/mlx5_flow_dv.c +7 -5
index c2a2874913..060ccdeec2 100644
@@ -7129,6 +7129,7 @@ flow_dv_counter_free(struct rte_eth_dev *dev, uint32_t counter)
 	struct mlx5_flow_counter_pool *pool = NULL;
 	struct mlx5_flow_counter *cnt;
 	enum mlx5_counter_type cnt_type;
+	uint32_t query_gen;
 
 	if (!counter)
 		return;
@@ -7153,16 +7154,17 @@ flow_dv_counter_free(struct rte_eth_dev *dev, uint32_t counter)
 	cnt->pool = pool;
 	/*
 	 * Put the counter back to list to be updated in none fallback mode.
-	 * Currently, we are using two list alternately, while one is in query,
+	 * Currently, we are using two lists alternately, while one is in query,
 	 * add the freed counter to the other list based on the pool query_gen
 	 * value. After query finishes, add counter the list to the global
-	 * container counter list. The list changes while query starts. In
-	 * this case, lock will not be needed as query callback and release
-	 * function both operate with the different list.
+	 * container counter list. Cache query_gen into a local variable before
+	 * TAILQ_INSERT_TAIL, since the macro evaluates its head argument
+	 * multiple times and pool->query_gen is a volatile bit-field.
 	 */
 	if (!priv->sh->sws_cmng.counter_fallback) {
 		rte_spinlock_lock(&pool->csl);
-		TAILQ_INSERT_TAIL(&pool->counters[pool->query_gen], cnt, next);
+		query_gen = pool->query_gen;
+		TAILQ_INSERT_TAIL(&pool->counters[query_gen], cnt, next);
 		rte_spinlock_unlock(&pool->csl);
 	} else {
 		cnt->dcs_when_free = cnt->dcs_when_active;
Signature · 1 line
2.39.3 (Apple Git-146)
author
#8 lore raw

PATCH v6 1/1 net/mlx5: fix counter TAILQ race between free and query callback

In reply to Laaahu

flow_dv_counter_free() inserts counters into pool->counters[pool->query_gen] under pool->csl. Meanwhile, mlx5_flow_async_pool_query_handle() moves counters from pool->counters[query_gen ^ 1] to the global free list via TAILQ_CONCAT while holding only cmng->csl, not pool->csl.

The comment in flow_dv_counter_free() claims the lock is not needed because the query callback and the release function operate on different lists. That holds only if the free path always observes the up-to-date query_gen. It can be violated:

1. A counter free thread (non-PMD, e.g. OVS offload thread) reads pool->query_gen == 0 and is about to insert into counters[0].
2. The free thread is preempted by the OS scheduler; it is a regular pthread, not pinned to a core.
3. The eal-intr-thread alarm fires: query_gen++ (now 1) and the async query is sent.
4. Hardware completes the query and the callback runs TAILQ_CONCAT on counters[0] (= query_gen ^ 1).
5. The free thread resumes and runs TAILQ_INSERT_TAIL on counters[0] concurrently with step 4 on another core.

Because the two paths take different locks, TAILQ_INSERT_TAIL and TAILQ_CONCAT run concurrently on the same list with no synchronization and corrupt it: the pool-local list ends up with a NULL head but a dangling tqh_last, and the global free list tail no longer points to the real tail. The just-freed counter and every counter inserted afterwards become unreachable and are leaked.

Non-PMD threads can be preempted for hundreds of microseconds under CPU pressure, which is well within the async query round-trip time, so the window is reachable in practice.

Fix it by taking pool->csl in the query completion callback before operating on pool->counters[query_gen], serializing the CONCAT with any concurrent INSERT. The lock is taken once per pool per query completion in the eal-intr-thread context, not on the datapath, so the cost is negligible. Lock order is pool->csl then cmng->csl, matching all other sites.

Also handle the error path: previously the counters accumulated in pool->counters[query_gen] were abandoned when a query failed. Move them back to the global free list to avoid a leak on persistent query failures.

Additionally, fix a second independent race in flow_dv_counter_free():
TAILQ_INSERT_TAIL is passed &pool->counters[pool->query_gen] directly, but the macro evaluates its head argument multiple times. Since pool->query_gen is a volatile bit-field, if mlx5_flow_query_alarm() increments query_gen between two evaluations of the macro, the same insertion can operate on two different lists: the earlier steps update counters[0] while the later steps update counters[1], leaving both lists with inconsistent metadata and leaking the counter. Fix by caching pool->query_gen into a local variable before calling the macro.

Fixes ac79183dc6f7 ("net/mlx5: optimize free counter lookup")

---

v6:
- Rebased onto latest main to resolve a release notes conflict: a new mlx5 entry was added upstream after v5, so this patch now adds its fix as a sub-bullet under the existing "Updated NVIDIA mlx5 ethernet driver" entry instead of a separate item.

v5:
- Added fix for Race 2: cache pool->query_gen into a local variable before TAILQ_INSERT_TAIL to prevent the macro from evaluating the volatile bit-field multiple times and crossing generation lists.
- Updated release notes: moved the fix entry under "Updated NVIDIA mlx5 driver" in New Features instead of using a separate "Fixed Issues" section.

v4:
- Fixed commit log line length over 75 characters.

v3:
- Added release notes entry.
- Added function comment in mlx5_flow_async_pool_query_handle().
- Clarified error path comment to note it is safe for transient failures.

v2:
- Fixed Signed-off-by to use full name.

 doc/guides/rel_notes/release_26_07.rst |  2 ++
 drivers/net/mlx5/mlx5_flow.c           | 31 ++++++++++++++++++++++++++
 drivers/net/mlx5/mlx5_flow_dv.c        | 12 +++++-----
 3 files changed, 40 insertions(+), 5 deletions(-)
doc/guides/rel_notes/release_26_07.rst +2 -0
index 5d7aa8d1bf..cdbd28ef4f 100644
@@ -139,6 +139,8 @@ New Features
 * **Updated NVIDIA mlx5 ethernet driver.**
 
   * Added support for selective Rx in scalar SPRQ Rx path.
+  * Fixed counter free list corruption when counter free operations race with
+    asynchronous query completions.
 
 * **Updated PCAP ethernet driver.**
 
drivers/net/mlx5/mlx5_flow.c +31 -0
index a95dd9dc94..b0eac185b5 100644
@@ -9893,6 +9893,13 @@ void
 mlx5_flow_async_pool_query_handle(struct mlx5_dev_ctx_shared *sh,
 				  uint64_t async_id, int status)
 {
+	/*
+	 * Handle async counter pool query completion.
+	 * query_gen is flipped each round: freed counters go into [query_gen],
+	 * while this callback moves [query_gen ^ 1] to the global free list.
+	 * pool->csl must be held when operating on pool->counters[] to serialize
+	 * with concurrent free-path insertions.
+	 */
 	struct mlx5_flow_counter_pool *pool =
 		(struct mlx5_flow_counter_pool *)(uintptr_t)async_id;
 	struct mlx5_counter_stats_raw *raw_to_free;
@@ -9904,6 +9911,21 @@ mlx5_flow_async_pool_query_handle(struct mlx5_dev_ctx_shared *sh,
 
 	if (unlikely(status)) {
 		raw_to_free = pool->raw_hw;
+		/*
+		 * The query failed, so the freed counters accumulated
+		 * in the old-gen list would otherwise be stranded.
+		 * Move them back to the global free list. This is safe
+		 * for both transient and persistent failures: the
+		 * counters are still valid and can be reused.
+		 */
+		if (!TAILQ_EMPTY(&pool->counters[query_gen])) {
+			rte_spinlock_lock(&pool->csl);
+			rte_spinlock_lock(&cmng->csl[cnt_type]);
+			TAILQ_CONCAT(&cmng->counters[cnt_type],
+				     &pool->counters[query_gen], next);
+			rte_spinlock_unlock(&cmng->csl[cnt_type]);
+			rte_spinlock_unlock(&pool->csl);
+		}
 	} else {
 		raw_to_free = pool->raw;
 		if (pool->is_aged)
@@ -9913,11 +9935,20 @@ mlx5_flow_async_pool_query_handle(struct mlx5_dev_ctx_shared *sh,
 		rte_spinlock_unlock(&pool->sl);
 		/* Be sure the new raw counters data is updated in memory. */
 		rte_io_wmb();
+		/*
+		 * A counter free thread may have read a stale query_gen
+		 * before the generation was flipped and could still be
+		 * inserting into this same old-gen list. Hold pool->csl to
+		 * serialize TAILQ_CONCAT with that TAILQ_INSERT_TAIL and
+		 * avoid corrupting the list.
+		 */
 		if (!TAILQ_EMPTY(&pool->counters[query_gen])) {
+			rte_spinlock_lock(&pool->csl);
 			rte_spinlock_lock(&cmng->csl[cnt_type]);
 			TAILQ_CONCAT(&cmng->counters[cnt_type],
 				     &pool->counters[query_gen], next);
 			rte_spinlock_unlock(&cmng->csl[cnt_type]);
+			rte_spinlock_unlock(&pool->csl);
 		}
 	}
 	LIST_INSERT_HEAD(&sh->sws_cmng.free_stat_raws, raw_to_free, next);
drivers/net/mlx5/mlx5_flow_dv.c +7 -5
index 307354c886..58ebcf87eb 100644
@@ -7129,6 +7129,7 @@ flow_dv_counter_free(struct rte_eth_dev *dev, uint32_t counter)
 	struct mlx5_flow_counter_pool *pool = NULL;
 	struct mlx5_flow_counter *cnt;
 	enum mlx5_counter_type cnt_type;
+	uint32_t query_gen;
 
 	if (!counter)
 		return;
@@ -7153,16 +7154,17 @@ flow_dv_counter_free(struct rte_eth_dev *dev, uint32_t counter)
 	cnt->pool = pool;
 	/*
 	 * Put the counter back to list to be updated in none fallback mode.
-	 * Currently, we are using two list alternately, while one is in query,
+	 * Currently, we are using two lists alternately, while one is in query,
 	 * add the freed counter to the other list based on the pool query_gen
 	 * value. After query finishes, add counter the list to the global
-	 * container counter list. The list changes while query starts. In
-	 * this case, lock will not be needed as query callback and release
-	 * function both operate with the different list.
+	 * container counter list. Cache query_gen into a local variable before
+	 * TAILQ_INSERT_TAIL, since the macro evaluates its head argument
+	 * multiple times and pool->query_gen is a volatile bit-field.
 	 */
 	if (!priv->sh->sws_cmng.counter_fallback) {
 		rte_spinlock_lock(&pool->csl);
-		TAILQ_INSERT_TAIL(&pool->counters[pool->query_gen], cnt, next);
+		query_gen = pool->query_gen;
+		TAILQ_INSERT_TAIL(&pool->counters[query_gen], cnt, next);
 		rte_spinlock_unlock(&pool->csl);
 	} else {
 		cnt->dcs_when_free = cnt->dcs_when_active;
Signature · 1 line
2.39.3 (Apple Git-146)
#9 lore raw

Hi,

Quoted 55 lines · Linhu Li

flow_dv_counter_free() inserts counters into pool->counters[pool->query_gen] under pool->csl. Meanwhile, mlx5_flow_async_pool_query_handle() moves counters from pool->counters[query_gen ^ 1] to the global free list via TAILQ_CONCAT while holding only cmng->csl, not pool->csl.

The comment in flow_dv_counter_free() claims the lock is not needed because the query callback and the release function operate on different lists. That holds only if the free path always observes the up-to-date query_gen. It can be violated:

1. A counter free thread (non-PMD, e.g. OVS offload thread) reads

    pool->query_gen == 0 and is about to insert into counters[0].

2. The free thread is preempted by the OS scheduler; it is a regular pthread, not pinned to a core.
3. The eal-intr-thread alarm fires: query_gen++ (now 1) and the async query is sent.
4. Hardware completes the query and the callback runs TAILQ_CONCAT on

    counters[0] (= query_gen ^ 1).

5. The free thread resumes and runs TAILQ_INSERT_TAIL on counters[0] concurrently with step 4 on another core.

Because the two paths take different locks, TAILQ_INSERT_TAIL and TAILQ_CONCAT run concurrently on the same list with no synchronization and corrupt it: the pool-local list ends up with a NULL head but a dangling tqh_last, and the global free list tail no longer points to the real tail. The just-freed counter and every counter inserted afterwards become unreachable and are leaked.

Non-PMD threads can be preempted for hundreds of microseconds under CPU pressure, which is well within the async query round-trip time, so the window is reachable in practice.

Fix it by taking pool->csl in the query completion callback before operating on pool->counters[query_gen], serializing the CONCAT with any concurrent INSERT. The lock is taken once per pool per query completion in the eal-intr-thread context, not on the datapath, so the cost is negligible. Lock order is pool->csl then cmng->csl, matching all other sites.

Also handle the error path: previously the counters accumulated in pool->counters[query_gen] were abandoned when a query failed. Move them back to the global free list to avoid a leak on persistent query failures.

Additionally, fix a second independent race in flow_dv_counter_free():
TAILQ_INSERT_TAIL is passed &pool->counters[pool->query_gen] directly, but the macro evaluates its head argument multiple times. Since pool->query_gen is a volatile bit-field, if mlx5_flow_query_alarm() increments query_gen between two evaluations of the macro, the same insertion can operate on two different lists: the earlier steps update counters[0] while the later steps update counters[1], leaving both lists with inconsistent metadata and leaking the counter. Fix by caching pool->query_gen into a local variable before calling the macro.

Quoted 5 lines
Fixes ac79183dc6f7 ("net/mlx5: optimize free counter lookup")

Patch applied to next-net-mlx,

Kindest regards
Raslan Darawsheh