usb: ucsi: huawei_gaokun: move typec_altmode off stack
PATCH 1/1 usb: ucsi: huawei_gaokun: move typec_altmode off stack
From: Arnd Bergmann <[email protected]>
The typec_altmode structure contains a 'struct device' object that cannot be allocated on the stack because of its size, even when ignoring the lifetime rules:
drivers/usb/typec/ucsi/ucsi_huawei_gaokun.c:326:13: error: stack frame size (1456) exceeds limit (1280) in 'gaokun_ucsi_usb_notify_ind' [-Werror,-Wframe-larger-than]
326 | static void gaokun_ucsi_usb_notify_ind(struct gaokun_ucsi *uec)
Since the altmode is always associated with a port here, move it into the port object and avoid at least the stack allocation issue.
---
This is probably not the fix we want, as it still leaves an uninitialized device object in the structure, but it illustrates the issue and fixing it like this has no immediate downsides.
Please check if you want this as a hotfix for the moment, or can provide a more elaborate fix. Reverting 1c2b66a7d725 may also be an option.
--- drivers/usb/typec/ucsi/ucsi_huawei_gaokun.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/usb/typec/ucsi/ucsi_huawei_gaokun.c +6 -6
@@ -84,6 +84,8 @@ struct gaokun_ucsi_port {struct auxiliary_device *bridge;struct typec_mux *typec_mux; +struct typec_mux_state state; +struct typec_altmode dp_alt;int idx;enum gaokun_ucsi_ccx ccx;
@@ -292,24 +294,22 @@ static int gaokun_ucsi_refresh(struct gaokun_ucsi *uec)static void gaokun_ucsi_handle_usb_mode (struct gaokun_ucsi_port *port) {struct gaokun_ucsi *uec = port->ucsi; -struct typec_mux_state state = {}; -struct typec_altmode dp_alt = {};int idx = port->idx, ret;/* * For every typec port on this platform, the only mode-switch is * controlled by its qmp combo phy which consumes svid and mode only. */ - dp_alt.svid = port->svid; - state.mode = port->mode; - state.alt = &dp_alt; + port->dp_alt.svid = port->svid; + port->state.mode = port->mode; + port->state.alt = &port->dp_alt;if (idx >= uec->num_ports) {dev_warn (uec->dev,"altmode port out of range: %d\n" , idx);return ; } - ret =typec_mux_set (port->typec_mux, &state); + ret =typec_mux_set (port->typec_mux, &port->state);if (ret)dev_err (uec->dev,"failed to set mux %d\n" , ret);
Signature · 1 line
2.39.5
Quoted 1 line · Arnd Bergmann
usb: ucsi:
huawei_gaokun: movetypec_altmodeoff stack
Signature · 2 lines
Best wishes, Pengyu