eth: fbnic: fix ordering of heartbeat vs ownership
Subsystems (3)
Jakub Kicinski
maintainerPATCH 1/1 eth: fbnic: fix ordering of heartbeat vs ownership
When requesting ownership of the NIC (MAC/PHY control), we set up the heartbeat to look stale:
/* Initialize heartbeat, set last response to 1 second in the past
* so that we will trigger a timeout if the firmware doesn't respond */
fbd->last_heartbeat_response = req_time - HZ; fbd->last_heartbeat_request = req_time;
The response handler then sets:
fbd->last_heartbeat_response = jiffies;
for which we wait via:
fbnic_fw_init_heartbeat() -> fbnic_fw_heartbeat_current()
The scheme is a bit odd, but it should work in principle.
Fix the ordering of operations. We have to set up the stale heartbeat before we send the message. Otherwise if the response is very fast we will override it. This triggers on QEMU if we run on the core that handles the IRQ, and results in ndo_open failing with ETIMEDOUT.
The change in ordering doesn't impact releasing the ownership. Both ndo_stop and heartbeat check are under rtnl_lock.
--- drivers/net/ethernet/meta/fbnic/fbnic_fw.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)
drivers/net/ethernet/meta/fbnic/fbnic_fw.c +4 -5
@@ -526,15 +526,10 @@ int fbnic_fw_xmit_ownership_msg(struct fbnic_dev *fbd, bool take_ownership) goto free_message; } - err =fbnic_mbx_map_tlv_msg (fbd, msg); -if (err) - goto free_message; -/* Initialize heartbeat, set last response to 1 second in the past * so that we will trigger a timeout if the firmware doesn't respond */ fbd->last_heartbeat_response = req_time -HZ ; - fbd->last_heartbeat_request = req_time;/* Set prev_firmware_time to 0 to avoid triggering firmware crash
@@ -542,6 +537,10 @@ int fbnic_fw_xmit_ownership_msg(struct fbnic_dev *fbd, bool take_ownership)*/ fbd->prev_firmware_time =0 ; + err =fbnic_mbx_map_tlv_msg (fbd, msg); +if (err) + goto free_message; +/* Set heartbeat detection based on if we are taking ownership */ fbd->fw_heartbeat_enabled = take_ownership;
Signature · 1 line
2.54.0
Quoted 28 lines · Jakub Kicinski
When requesting ownership of the NIC (MAC/PHY control), we set up the heartbeat to look stale:
/* Initialize heartbeat, set last response to 1 second in the past
* so that we will trigger a timeout if the firmware doesn't respond */
fbd->last_heartbeat_response=req_time- HZ;fbd->last_heartbeat_request=req_time;The response handler then sets:
fbd->last_heartbeat_response = jiffies;for which we wait via:
fbnic_fw_init_heartbeat()->fbnic_fw_heartbeat_current()The scheme is a bit odd, but it should work in principle.
Fix the ordering of operations. We have to set up the stale heartbeat before we send the message. Otherwise if the response is very fast we will override it. This triggers on QEMU if we run on the core that handles the IRQ, and results in
ndo_openfailing with ETIMEDOUT.The change in ordering doesn't impact releasing the ownership. Both
ndo_stopand heartbeat check are underrtnl_lock.
Quoted 7 lines
Fixes 20d2e88cc746 ("eth: fbnic: Add initial messaging to notify FW of our presence")Reviewed-by Alexander Duyck <[email protected]>Signed-off-by Jakub Kicinski <[email protected]>--- drivers/net/ethernet/meta/fbnic/fbnic_fw.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)
This patch was applied to netdev/net.git (main) by Jakub Kicinski <[email protected]>:
Hello:
This patch was applied to netdev/net.git (main)
by Jakub Kicinski <[email protected]>:
Quoted 10 lines · On Mon, 22 Jun 2026 08:47:53 -0700 you wrote:
When requesting ownership of the NIC (MAC/PHY control), we set up the heartbeat to look stale:
/* Initialize heartbeat, set last response to 1 second in the past
* so that we will trigger a timeout if the firmware doesn't respond */
fbd->last_heartbeat_response=req_time- HZ;fbd->last_heartbeat_request=req_time;[...]
Here is the summary with links:
- [net] eth: fbnic: fix ordering of heartbeat vs ownership
https://git.kernel.org/netdev/net/c/d87363b0edfc
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html