agp: efficeon: Disable PCI device on probe failure
PATCH 1/1 agp: efficeon: Disable PCI device on probe failure
agp_efficeon_probe() enables the PCI device before checking whether the GART resource can be assigned and before registering the AGP bridge. If either of those later steps fails, the probe path can return without dropping the enable reference.
Route the resource-assignment failure through a shared unwind path that puts the bridge before disabling the PCI device. Also check the return value from agp_add_bridge() explicitly, disabling the PCI device on failure while leaving the bridge cleanup to agp_add_bridge()'s failure handling.
Balance the successful probe path by disabling the PCI device from remove() after the AGP bridge has been removed and released.
This issue was identified during our ongoing static-analysis research while reviewing kernel code.
--- drivers/char/agp/efficeon-agp.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-)
drivers/char/agp/efficeon-agp.c +15 -3
@@ -346,6 +346,7 @@ static int agp_efficeon_probe(struct pci_dev *pdev,struct agp_bridge_data *bridge;u8 cap_ptr;struct resource *r; +int err; cap_ptr =pci_find_capability (pdev,PCI_CAP_ID_AGP );if (!cap_ptr)
@@ -388,8 +389,8 @@ static int agp_efficeon_probe(struct pci_dev *pdev,if (!r->start && r->end) {if (pci_assign_resource (pdev,0 )) { printk(KERN_ERR PFX "could not assign resource 0\n"); -agp_put_bridge (bridge); -return -ENODEV ; + err = -ENODEV ; + goto err_put_bridge; } }
@@ -401,7 +402,17 @@ static int agp_efficeon_probe(struct pci_dev *pdev, }pci_set_drvdata (pdev, bridge); -return agp_add_bridge (bridge); + err =agp_add_bridge (bridge); +if (err) + goto err_disable_device; + +return 0 ; + +err_put_bridge: +agp_put_bridge (bridge); +err_disable_device: +pci_disable_device (pdev); +return err; }static void agp_efficeon_remove (struct pci_dev *pdev)
@@ -410,6 +421,7 @@ static void agp_efficeon_remove(struct pci_dev *pdev)agp_remove_bridge (bridge);agp_put_bridge (bridge); +pci_disable_device (pdev); }static int agp_efficeon_resume (struct device *dev)
Signature · 1 line
2.47.1
[email protected]
AI reviewThank you for your contribution! Sashiko AI review found 3 potential issue(s) to consider:
Thank you for your contribution! Sashiko AI review found 3 potential issue(s) to consider:
Pre-existing issues:
- [High] The global agp_bridges list is accessed and modified locklessly, risking list corruption.
- [High] The global agp_bridge pointer becomes a dangling pointer (Use-After-Free) if the primary AGP bridge is removed while another bridge exists.
- [High] The efficeon AGP probe workaround for unassigned GART resources is dead code due to premature pci_enable_device() failure. --
commit 36a9a4194e2f3dcd5be646e083175ac41ccbc0a0
Author: Myeonghun Pak <[email protected]>
Subject: agp: efficeon: Disable PCI device on probe failure
agp_efficeon_probe() enables the PCI device before checking whether the GART resource can be assigned and before registering the AGP bridge. If either of those later steps fails, the probe path can return without dropping the enable reference. Route the resource-assignment failure through a shared unwind path that puts the bridge before disabling the PCI device.
Quoted 4 lines
drivers/char/agp/efficeon-agp.c +0
-0
[ ... ]
drivers/char/agp/efficeon-agp.c static int agp_efficeon_probe(struct pci_dev *pdev, · line 393
Quoted 8 lines
drivers/char/agp/efficeon-agp.c +2
-2@@ -388,8 +389,8 @@ static int agp_efficeon_probe(struct pci_dev *pdev,if (!r->start && r->end) {if (pci_assign_resource (pdev,0 )) { printk(KERN_ERR PFX "could not assign resource 0\n"); -agp_put_bridge (bridge); -return -ENODEV ; + err = -ENODEV ; + goto err_put_bridge;
[Severity: High]
This isn't a bug introduced by this patch, but is the Efficeon AGP probe workaround for unassigned GART resources completely dead code?
In agp_efficeon_probe(), pci_enable_device() is called before we reach this pci_assign_resource() fallback. Because pci_enable_device() internally calls pci_enable_resources(), it will return -EINVAL if any mandatory resource is unassigned.
If the BIOS failed to assign the GART resource, pci_enable_device() will fail and abort the probe prematurely, making this pci_assign_resource() logic unreachable.
drivers/char/agp/efficeon-agp.c static int agp_efficeon_probe(struct pci_dev *pdev, · line 405
Quoted 9 lines
drivers/char/agp/efficeon-agp.c +1
-1} }@@ -401,7 +402,17 @@ static int agp_efficeon_probe(struct pci_dev *pdev, }pci_set_drvdata (pdev, bridge); -return agp_add_bridge (bridge); + err =agp_add_bridge (bridge);
[Severity: High]
This is a pre-existing issue, but does modifying the global agp_bridges list here risk list corruption?
In drivers/char/agp/backend.c, agp_add_bridge() calls:
list_add(&bridge->list, &agp_bridges);
And later in agp_remove_bridge():
list_del(&bridge->list);
Both access the global agp_bridges list locklessly. If asynchronous PCI probing is enabled or a parallel sysfs unbind occurs while another bridge is probed or accessed by a client driver, could concurrent modifications corrupt the linked list pointers?
drivers/char/agp/efficeon-agp.c static int agp_efficeon_probe(struct pci_dev *pdev, · line 412
Quoted 7 lines
drivers/char/agp/efficeon-agp.c +7
-0+if (err) + goto err_disable_device; + +return 0 ; + +err_put_bridge: +agp_put_bridge (bridge);
[Severity: High]
This is a pre-existing issue, but does agp_put_bridge() leave a dangling pointer in the global agp_bridge variable if the primary AGP bridge is removed while another bridge exists?
Looking at drivers/char/agp/backend.c:agp_put_bridge():
kfree(bridge);
if (list_empty(&agp_bridges))
agp_bridge = NULL;If multiple AGP bridges are probed, agp_bridge points to the first one. When this first bridge is removed (e.g. via sysfs unbind), agp_put_bridge() frees it using kfree(). However, since the second bridge is still in the list, list_empty() evaluates to false, and agp_bridge remains unchanged, pointing to freed memory.
Could subsequent accesses to the global agp_bridge pointer result in a use-after-free?
Quoted 4 lines
drivers/char/agp/efficeon-agp.c +3
-0+err_disable_device: +pci_disable_device (pdev); +return err; }
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=1