Skip to contentSkip to conversation

arm64: dts: ti: k3-am62-verdin: Add Toradex Capacitive Touch Display 10.1" LVDS

PATCH Applied Leonardo Costa 5 participants 13 messages Jun 23 – Jul 24

Subsystems (6)
lore
Share & tools
lore
#0 lore raw

cover arm64: dts: ti: k3-am62-verdin: Add Toradex Capacitive Touch Display 10.1" LVDS

From: Leonardo Costa <[email protected]>

This series adds device tree overlays for Toradex Capacitive Touch Display 10.1" LVDS V2 on Verdin AM62.

The display addition covers two interface types:

- Native OLDI (LVDS)
- DSI-to-LVDS adapter based on the SN65DSI84

The Opto Logic vendor prefix and panel binding for the SCX1001511GGC49 is also added.

Leonardo Costa (5):
dt-bindings: vendor-prefixes: Add Opto Logic
dt-bindings: display: panel-lvds: Add compatible for Opto Logic

    SCX1001511GGC49
  arm64: dts: ti: k3-am62-verdin: Add Toradex Capacitive Touch Display
    10.1" LVDS V2
  arm64: dts: ti: k3-am62-verdin: Add Toradex DSI to LVDS adapter with
    the 10.1" V2 display
  arm64: dts: ti: k3-am62-verdin: Add Mezzanine with Toradex Display
    10.1" LVDS
 .../bindings/display/panel/panel-lvds.yaml    |   2 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm64/boot/dts/ti/Makefile               |  15 ++
 ...zanine-panel-cap-touch-10inch-lvds-v2.dtso | 109 +++++++++++++
 ...dsi-to-lvds-v2-panel-cap-touch-10inch.dtso | 143 ++++++++++++++++++
 ...verdin-panel-cap-touch-10inch-lvds-v2.dtso | 129 ++++++++++++++++
 6 files changed, 400 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-dev-mezzanine-panel-cap-touch-10inch-lvds-v2.dtso
 create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-dsi-to-lvds-v2-panel-cap-touch-10inch.dtso
 create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-panel-cap-touch-10inch-lvds-v2.dtso
#1 lore raw

PATCH 1/5 dt-bindings: vendor-prefixes: Add Opto Logic

From: Leonardo Costa <[email protected]>

Add vendor prefix for Opto Logic, a Swiss display solutions provider and printing systems manufacturer.

---
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/vendor-prefixes.yaml +2 -0
index dd94c50e97f9c..ce0607afc1f4b 100644
@@ -1247,6 +1247,8 @@ patternProperties:
     description: OpenWrt
   "^option,.*":
     description: Option NV
+  "^optologic,.*":
+    description: Opto Logic S.A.
   "^oranth,.*":
     description: Shenzhen Oranth Technology Co., Ltd.
   "^ORCL,.*":
Acked-by on v1 1/5
#2 lore raw

Re: [PATCH 1/5] dt-bindings: vendor-prefixes: Add Opto Logic

Quoted 10 lines · Leonardo Costa

From: Leonardo Costa <[email protected]>

Add vendor prefix for Opto Logic, a Swiss display solutions provider and printing systems manufacturer.

---
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)

Best regards,
Krzysztof

#3 lore raw

PATCH 2/5 dt-bindings: display: panel-lvds: Add compatible for Opto Logic SCX1001511GGC49

In reply to Leonardo Costa

From: Leonardo Costa <[email protected]>

The Opto Logic SCX1001511GGC49 is a 10.1" WXGA (1280x800) TFT LCD LVDS panel.

---
 Documentation/devicetree/bindings/display/panel/panel-lvds.yaml | 2 ++
 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/display/panel/panel-lvds.yaml +2 -0
index b89f86bc06837..8382d4920bfd6 100644
@@ -58,6 +58,8 @@ properties:
           - hydis,hv070wx2-1e0
           # Jenson Display BL-JT60050-01A 7" WSVGA (1024x600) color TFT LCD LVDS panel
           - jenson,bl-jt60050-01a
+          # Opto Logic SCX1001511GGC49 10.1" WXGA (1280x800) TFT LCD LVDS panel
+          - optologic,scx1001511ggc49
           # Riverdi RVT101HVLNWC00 10.1" WXGA (1280x800) TFT LCD LVDS panel
           - riverdi,rvt101hvlnwc00
           # Riverdi RVT70HSLNWCA0 7.0" WSVGA (1024x600) TFT LCD LVDS panel
Acked-by on v1 2/5
#4 lore raw

Re: [PATCH 2/5] dt-bindings: display: panel-lvds: Add compatible for Opto Logic SCX1001511GGC49

Quoted 9 lines · Leonardo Costa

From: Leonardo Costa <[email protected]>

The Opto Logic SCX1001511GGC49 is a 10.1" WXGA (1280x800) TFT LCD LVDS panel.

---
 Documentation/devicetree/bindings/display/panel/panel-lvds.yaml | 2 ++
 1 file changed, 2 insertions(+)

Best regards,
Krzysztof

#5 lore raw

PATCH 3/5 arm64: dts: ti: k3-am62-verdin: Add Toradex Capacitive Touch Display 10.1" LVDS V2

In reply to Leonardo Costa

From: Leonardo Costa <[email protected]>

Add a device tree overlay for the Toradex Capacitive Touch Display 10.1" LVDS V2 connected via Verdin AM62 OLDI on carrier boards exposing LVDS interface (e.g., Mallow). The panel is an Opto Logic SCX1001511GGC49 10.1" WXGA TFT LCD and the touch input is provided by an ILITEK ILI251x capacitive touch controller.

---
 arch/arm64/boot/dts/ti/Makefile               |   5 +
 ...verdin-panel-cap-touch-10inch-lvds-v2.dtso | 129 ++++++++++++++++++
 2 files changed, 134 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-panel-cap-touch-10inch-lvds-v2.dtso
arch/arm64/boot/dts/ti/Makefile +5 -0
index 371f9a043fe52..61ae9039e561d 100644
@@ -47,6 +47,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-ov5640-24mhz.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-ov5640.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-panel-cap-touch-10inch-dsi.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-panel-cap-touch-10inch-lvds.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-panel-cap-touch-10inch-lvds-v2.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-panel-cap-touch-7inch-dsi.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-uart4-mcu.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dahlia-dsi-to-hdmi.dtb
@@ -249,6 +250,9 @@ k3-am625-verdin-wifi-dev-uart4-mcu-dtbs := k3-am625-verdin-wifi-dev.dtb \
 k3-am625-verdin-wifi-mallow-panel-cap-touch-10inch-lvds-dtbs := \
 	k3-am625-verdin-wifi-mallow.dtb \
 	k3-am625-verdin-panel-cap-touch-10inch-lvds.dtbo
+k3-am625-verdin-wifi-mallow-panel-cap-touch-10inch-lvds-v2-dtbs := \
+	k3-am625-verdin-wifi-mallow.dtb \
+	k3-am625-verdin-panel-cap-touch-10inch-lvds-v2.dtbo
 k3-am62-lp-sk-hdmi-audio-dtbs := k3-am62-lp-sk.dtb k3-am62x-sk-hdmi-audio.dtbo
 k3-am62-lp-sk-nand-dtbs := k3-am62-lp-sk.dtb k3-am62-lp-sk-nand.dtbo
 k3-am62a7-phyboard-lyra-disable-eth-phy-dtbs := k3-am62a7-phyboard-lyra-rdk.dtb \
@@ -359,6 +363,7 @@ dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \
 	k3-am625-verdin-wifi-dev-panel-cap-touch-7inch-dsi.dtb \
 	k3-am625-verdin-wifi-dev-uart4-mcu.dtb \
 	k3-am625-verdin-wifi-mallow-panel-cap-touch-10inch-lvds.dtb \
+	k3-am625-verdin-wifi-mallow-panel-cap-touch-10inch-lvds-v2.dtb \
 	k3-am62-lp-sk-hdmi-audio.dtb \
 	k3-am62-lp-sk-nand.dtb \
 	k3-am62a7-phyboard-lyra-disable-eth-phy.dtb \
arch/arm64/boot/dts/ti/k3-am625-verdin-panel-cap-touch-10inch-lvds-v2.dtso new file +129 -0

129 lines not on this page · raw message

#6 lore raw

PATCH 4/5 arm64: dts: ti: k3-am62-verdin: Add Toradex DSI to LVDS adapter with the 10.1" V2 display

In reply to Leonardo Costa

From: Leonardo Costa <[email protected]>

Add a device tree overlay for the Toradex DSI to LVDS Adapter with the Toradex Capacitive Touch Display 10.1" LVDS V2. The adapter connects to the Verdin DSI_1 interface. It is based on the Texas Instruments SN65DSI84 DSI-to-LVDS bridge and drives an Opto Logic SCX1001511GGC49 10.1" WXGA TFT LCD LVDS panel. Touch input is provided by an ILITEK ILI251x capacitive touch controller.

---
 arch/arm64/boot/dts/ti/Makefile               |   5 +
 ...dsi-to-lvds-v2-panel-cap-touch-10inch.dtso | 143 ++++++++++++++++++
 2 files changed, 148 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-dsi-to-lvds-v2-panel-cap-touch-10inch.dtso
arch/arm64/boot/dts/ti/Makefile +5 -0
index 61ae9039e561d..8b90fef11cb32 100644
@@ -34,6 +34,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-dev-mezzanine-panel-cap-touch-10inch-lv
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-dev-nau8822-btl.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-dsi-to-hdmi.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-dsi-to-lvds-panel-cap-touch-10inch.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-dsi-to-lvds-v2-panel-cap-touch-10inch.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-dahlia-dsi-to-hdmi.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-dahlia-panel-cap-touch-10inch-dsi.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-dahlia.dtb
@@ -231,6 +232,9 @@ k3-am625-sk-hdmi-audio-dtbs := k3-am625-sk.dtb k3-am62x-sk-hdmi-audio.dtbo
 k3-am625-verdin-wifi-dev-dsi-to-lvds-panel-cap-touch-10inch-dtbs := \
 	k3-am625-verdin-wifi-dev.dtb \
 	k3-am625-verdin-dsi-to-lvds-panel-cap-touch-10inch.dtbo
+k3-am625-verdin-wifi-dev-dsi-to-lvds-v2-panel-cap-touch-10inch-dtbs := \
+	k3-am625-verdin-wifi-dev.dtb \
+	k3-am625-verdin-dsi-to-lvds-v2-panel-cap-touch-10inch.dtbo
 k3-am625-verdin-wifi-dev-mezzanine-can-dtbs := k3-am625-verdin-wifi-dev.dtb \
 	k3-am625-verdin-dev-mezzanine-can.dtbo
 k3-am625-verdin-wifi-dev-mezzanine-panel-cap-touch-10inch-lvds-dtbs := \
@@ -355,6 +359,7 @@ dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \
 	k3-am625-sk-csi2-tevi-ov5640.dtb \
 	k3-am625-sk-hdmi-audio.dtb \
 	k3-am625-verdin-wifi-dev-dsi-to-lvds-panel-cap-touch-10inch.dtb \
+	k3-am625-verdin-wifi-dev-dsi-to-lvds-v2-panel-cap-touch-10inch.dtb \
 	k3-am625-verdin-wifi-dev-mezzanine-can.dtb \
 	k3-am625-verdin-wifi-dev-mezzanine-panel-cap-touch-10inch-lvds.dtb \
 	k3-am625-verdin-wifi-dev-nau8822-btl.dtb \
arch/arm64/boot/dts/ti/k3-am625-verdin-dsi-to-lvds-v2-panel-cap-touch-10inch.dtso new file +143 -0

143 lines not on this page · raw message

#7 lore raw

PATCH 5/5 arm64: dts: ti: k3-am62-verdin: Add Mezzanine with Toradex Display 10.1" LVDS

In reply to Leonardo Costa

From: Leonardo Costa <[email protected]>

Add a device tree overlay enabling the Toradex Capacitive Touch Display 10.1" LVDS V2 on the Verdin Development Board with Verdin AM62 Mezzanine expansion board. The panel connects via the AM62 OLDI0 on the Mezzanine LVDS interface (J10). The panel is an Opto Logic SCX1001511GGC49 10.1" WXGA TFT LCD LVDS and the touch input is provided by an ILITEK ILI251x capacitive touch controller.

---
 arch/arm64/boot/dts/ti/Makefile               |   5 +
 ...zanine-panel-cap-touch-10inch-lvds-v2.dtso | 109 ++++++++++++++++++
 2 files changed, 114 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-dev-mezzanine-panel-cap-touch-10inch-lvds-v2.dtso
arch/arm64/boot/dts/ti/Makefile +5 -0
index 8b90fef11cb32..d9e0b1b80b28d 100644
@@ -31,6 +31,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am625-sk.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-tqma62xx-mba62xx.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-dev-mezzanine-can.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-dev-mezzanine-panel-cap-touch-10inch-lvds.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-dev-mezzanine-panel-cap-touch-10inch-lvds-v2.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-dev-nau8822-btl.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-dsi-to-hdmi.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-dsi-to-lvds-panel-cap-touch-10inch.dtbo
@@ -240,6 +241,9 @@ k3-am625-verdin-wifi-dev-mezzanine-can-dtbs := k3-am625-verdin-wifi-dev.dtb \
 k3-am625-verdin-wifi-dev-mezzanine-panel-cap-touch-10inch-lvds-dtbs := \
 	k3-am625-verdin-wifi-dev.dtb \
 	k3-am625-verdin-dev-mezzanine-panel-cap-touch-10inch-lvds.dtbo
+k3-am625-verdin-wifi-dev-mezzanine-panel-cap-touch-10inch-lvds-v2-dtbs := \
+	k3-am625-verdin-wifi-dev.dtb \
+	k3-am625-verdin-dev-mezzanine-panel-cap-touch-10inch-lvds-v2.dtbo
 k3-am625-verdin-wifi-dev-nau8822-btl-dtbs := k3-am625-verdin-wifi-dev.dtb \
 	k3-am625-verdin-dev-nau8822-btl.dtbo
 k3-am625-verdin-wifi-dev-ov5640-24mhz-dtbs := k3-am625-verdin-wifi-dev.dtb \
@@ -362,6 +366,7 @@ dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \
 	k3-am625-verdin-wifi-dev-dsi-to-lvds-v2-panel-cap-touch-10inch.dtb \
 	k3-am625-verdin-wifi-dev-mezzanine-can.dtb \
 	k3-am625-verdin-wifi-dev-mezzanine-panel-cap-touch-10inch-lvds.dtb \
+	k3-am625-verdin-wifi-dev-mezzanine-panel-cap-touch-10inch-lvds-v2.dtb \
 	k3-am625-verdin-wifi-dev-nau8822-btl.dtb \
 	k3-am625-verdin-wifi-dev-ov5640-24mhz.dtb \
 	k3-am625-verdin-wifi-dev-ov5640.dtb \
arch/arm64/boot/dts/ti/k3-am625-verdin-dev-mezzanine-panel-cap-touch-10inch-lvds-v2.dtso new file +109 -0

109 lines not on this page · raw message

Reviewed-by on the v1 series
#8 lore raw
In reply to Leonardo Costa
Quoted 5 lines · Leonardo Costa

From: Leonardo Costa <[email protected]>

This series adds device tree overlays for Toradex Capacitive Touch Display 10.1" LVDS V2 on Verdin AM62.

Quoted 7 lines

The display addition covers two interface types:

- Native OLDI (LVDS)
- DSI-to-LVDS adapter based on the SN65DSI84

The Opto Logic vendor prefix and panel binding for the SCX1001511GGC49 is also added.

maintainer Applied
#9 lore raw
In reply to Leonardo Costa

Hi Leonardo Costa,

Quoted 8 lines · Leonardo Costa

arm64: dts: ti: k3-am62-verdin: Add Toradex Capacitive Touch Display 10.1" LVDS

From: Leonardo Costa <[email protected]>

This series adds device tree overlays for Toradex Capacitive Touch Display 10.1" LVDS V2 on Verdin AM62.

[...]

I have applied the following to branch ti-k3-dts-next on [1]. Thank you!

[1/5] dt-bindings: vendor-prefixes: Add Opto Logic

      commit: d980b7b9263e43bcf876be2f36355d23d58b24bb
[2/5] dt-bindings: display: panel-lvds: Add compatible for Opto Logic SCX1001511GGC49
      commit: 854310180235e4c1df953eea3c97e9a1fca5b53c
[3/5] arm64: dts: ti: k3-am62-verdin: Add Toradex Capacitive Touch Display 10.1" LVDS V2
      commit: f19e38321d061fcbc695f9a7aa609e4ef9eff1a2
[4/5] arm64: dts: ti: k3-am62-verdin: Add Toradex DSI to LVDS adapter with the 10.1" V2 display
      commit: fea4b900f4e8afb518def13b487b44472d3974c1
[5/5] arm64: dts: ti: k3-am62-verdin: Add Mezzanine with Toradex Display 10.1" LVDS
      commit: 46d70de6c0afc95252330ef08c70704aa47a6a95

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent up the chain during the next merge window (or sooner if it is a relevant bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
--
Vignesh

maintainer Applied
#10 lore raw

Re: (subset) [PATCH 0/5] arm64: dts: ti: k3-am62-verdin: Add Toradex Capacitive Touch Display 10.1" LVDS

In reply to Leonardo Costa

Hi,

Quoted 8 lines · Leonardo Costa

From: Leonardo Costa <[email protected]>

This series adds device tree overlays for Toradex Capacitive Touch Display 10.1" LVDS V2 on Verdin AM62.

The display addition covers two interface types:

[...]

Thanks, Applied to https://gitlab.freedesktop.org/drm/misc/kernel.git (drm-misc-next)

[2/5] dt-bindings: display: panel-lvds: Add compatible for Opto Logic SCX1001511GGC49

      https://gitlab.freedesktop.org/drm/misc/kernel/-/commit/6ce748682f746a0c1ae311191fb820b08151ddb6
Signature · 1 line
Neil
#11 lore raw

Re: (subset) [PATCH 0/5] arm64: dts: ti: k3-am62-verdin: Add Toradex Capacitive Touch Display 10.1" LVDS

Hi Neil

Quoted 8 lines · Neil Armstrong

Hi,

Quoted 5 lines · Leonardo Costa

From: Leonardo Costa <[email protected]>

This series adds device tree overlays for Toradex Capacitive Touch Display 10.1" LVDS V2 on Verdin AM62.

Quoted 9 lines
Quoted 3 lines

The display addition covers two interface types:

[...]

Thanks, Applied to https://gitlab.freedesktop.org/drm/misc/kernel.git (drm-misc-next)

[2/5] dt-bindings: display: panel-lvds: Add compatible for Opto Logic SCX1001511GGC49

      https://gitlab.freedesktop.org/drm/misc/kernel/-/commit/6ce748682f746a0c1ae311191fb820b08151ddb6

Could you also pick up 1/5 which adds the optologic vendor prefix needed by 2/5. Thanks!

Signature · 3 lines
Regards
Vignesh
https://ti.com/opensource
maintainer Applied
#12 lore raw

Re: (subset) [PATCH 0/5] arm64: dts: ti: k3-am62-verdin: Add Toradex Capacitive Touch Display 10.1" LVDS

In reply to Leonardo Costa

Hi,

Quoted 8 lines · Leonardo Costa

From: Leonardo Costa <[email protected]>

This series adds device tree overlays for Toradex Capacitive Touch Display 10.1" LVDS V2 on Verdin AM62.

The display addition covers two interface types:

[...]

Thanks, Applied to https://gitlab.freedesktop.org/drm/misc/kernel.git (drm-misc-next)

[1/5] dt-bindings: vendor-prefixes: Add Opto Logic

      https://gitlab.freedesktop.org/drm/misc/kernel/-/commit/4685230d8288a99f1c664768b6eb2bd1545524c7
Signature · 1 line
Neil