Add exportable vulnerability informations
cover Add exportable vulnerability informations
In Buildroot, we can put the ignore CVEs entries in different categories:
- Vulnerability fixed by a patch.
- Vulnerability ignored because the internal tooling detect it as a false positive
- Vulnerability ignored because the database is wrong or not up-to-date.
- Vulnerability ignored because it doesn't apply to Buildroot (platform/hardware specific, ...).
- Vulnerability ignored because Buildroot is using an upstream fixed version (based on a hash for instance) while the CPE metadata reference the latest known version.
Since the introduction of _IGNORE_CVES the justification for the vulnerability were added as a comment on top of the ignored vulnerability.
With the introduction of the rule for the CVE: trailer it's now possible to distinguish the vulnerabilities that are patched from the one that are not-applicable for another unknown reason.
This series add support to tag the remaining 'IGNORE_CVES' entry with a set of information that can then be exported with 'show-info'.
This was discussed during the post-FOSDEM buildroot hackathon. The idea of using OpenVex for the annotation format as in the future multiple SBOM output format might be supported and OpenVex looked like a good candidate for the base annotation without re-inventing our own format.
This RFC to discuss:
- The OpenVex annotation used and how we make them map to the Buildroot cases (see the doc change). I also provided some example of ignored entries and how I make them map to give more context. Not all the entries are mapped yet.
- Should we consider another format ?
- How I translate this format to CycloneDX analysis.
Still TODO:
- The CycloneDX translation needs to change as it depends on
https://patchwork.ozlabs.org/project/buildroot/patch/[email protected]/.
The current implementation is a rough draft that is used only for testing
- The STATUS and DETAIL variables needs to be replicated for host packages.
- Add a test case that run 'make show-info-all | utils/generate-cyclonedx' and verify no "in_triage" analysis remains. This depends on the two previous TODOs.
Thomas Perale (14):
docs/manual: add vulnerability status and justification utils/checkpackagelib/lib_mk.py: check _STATUS value is supported package/pkg-utils: show-info expose vuln details utils/generate-cyclonedx: support vulnerability details package/sox: add vulnerabilities details
package/php: add vulnerability details
package/mupdf: add vulnerabilities details package/python-pip: add detail to vulnerability package/luajit: add details to vulnerabilities package/libuci: add vulnerability details package/glibc: add vulnerability details package/freeradius-server: add vulnerabilities details package/flex: add vulnerability details package/clamav: add vulnerability details
docs/manual/adding-packages-generic.adoc | 35 ++++++++ package/clamav/clamav.mk | 6 +- package/flex/flex.mk | 7 +- .../freeradius-server/freeradius-server.mk | 7 +- package/glibc/glibc.mk | 32 ++++--- package/libuci/libuci.mk | 3 +- package/luajit/luajit.mk | 15 ++-- package/mupdf/mupdf.mk | 10 +-- package/php/php.mk | 3 +- package/pkg-utils.mk | 19 +++++ package/python-pip/python-pip.mk | 5 +- package/sox/sox.mk | 41 ++++++--- utils/checkpackagelib/lib_mk.py | 22 +++++ utils/generate-cyclonedx | 83 +++++++++++++++---- 14 files changed, 227 insertions(+), 61 deletions(-)
Signature · 6 lines
2.54.0 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
RFC PATCH 1/14 docs/manual: add vulnerability status and justification
In Buildroot, we can put the ignore CVEs entries in different categories:
- Vulnerability fixed by a patch.
- Vulnerability ignored because the internal tooling detect it as a false positive
- Vulnerability ignored because the database is wrong or not up-to-date.
- Vulnerability ignored because it doesn't apply to Buildroot (platform/hardware specific, ...).
- Vulnerability ignored because Buildroot is using an upstream fixed version (based on a hash for instance) while the CPE metadata reference the latest known version.
Since the introduction of _IGNORE_CVES the justification for the vulnerability were added as a comment on top of the ignored vulnerability. With the introduction of the rule for the CVE: trailer it's now possible to distinguish the vulnerabilities that are patched from the one that are not-applicable for another unknown reason.
This commit add documentation to introduce two new variables:
- <pkg>_<vuln-id>_STATUS
- <pkg>_<vuln-id>_DETAIL
This allows to have machine readable variables that are exposed and contains the reasons why a vulnerability is set as ignored instead of storing this knowledge in a comment on top of the _IGNORE_CVES entry.
The <pkg>_<vuln-id>_STATUS syntax is based on OpenVex statuses syntax [1][2]. This varialbe only needs to be used if a patch on the Buildroot tree isn't present.
The <pkg>_<vuln-id>_DETAIL is a free text field that allows to add more information to justify the status.
[1] https://github.com/openvex/spec/blob/main/OPENVEX-SPEC.md#status-labels
[2] https://github.com/openvex/ospec/blob/main/OPENVEX-SPEC.md#status-justifications
--- docs/manual/adding-packages-generic.adoc | 35 ++++++++++++++++++++++++ 1 file changed, 35 insertions(+)
docs/manual/adding-packages-generic.adoc +35 -0
@@ -520,6 +520,41 @@ LIBFOO_IGNORE_CVES += CVE-2020-12345 LIBFOO_IGNORE_CVES += CVE-2020-54321 ---- +* +LIBFOO_<VULN-ID>_STATUS+ informs about the impact of the vulnerability + +<VULN-ID>+. This variable needs to be set only if the referenced +<VULN-ID>+ + is not fixed by a patch present in the Buildroot tree. It support different + labels based on + https://github.com/openvex/spec/blob/main/OPENVEX-SPEC.md#status-labels[OpenVex + statuses] and + https://github.com/openvex/spec/blob/main/OPENVEX-SPEC.md#status-justifications[justification]: + ** +fixed+: referenced by the package Makefile already includes the fix but + no new version has been issued by the upstream project. This typically + happens when the version is using an +hash+ and the CPE reference the + latest known version. + ** +not-affected-component-not-present+: the vulnerability is incorrect and + should reference another package. Or the package is not part of the final + image. + ** +not-affected-vulnerable-code-not-present+: the code affected by the + vulnerability is not included in the final image. Could be a not supported + architecture, flags that are disabled by the package configuration, + busybox commands not built, dependencies not supported, ... + ** +not-affected-vulnerable-code-not-in-execute-path+: the vulnerable code is + present in the generated image but cannot be reached because of the + system's runtime configuration. + ** +not-affected-vulnerable-code-cannot-be-controlled-by-adversary+: the + vulnerable code may be executed, but an attacker cannot control the inputs + required to trigger the vulnerability. +* +LIBFOO_<VULN-ID>_DETAIL+ is an optional free text entry that add + additional information on the reason a +STATUS+ has been set for a + +<VULN-ID>+. ++ +---- +LIBFOO_IGNORE_CVES += CVE-2020-54321 + +LIBFOO_CVE-2020-54321_STATUS = not-affected-vulnerable-code-not-present +LIBFOO_CVE-2020-54321_DETAIL = Only when built with libbaz, which Buildroot doesn't support +---- + * [[cpe-id]] +LIBFOO_CPE_ID_*+ variables is a set of variables that allows the package to define its https://nvd.nist.gov/products/cpe[CPE identifier]. The available variables are:
Signature · 6 lines
2.54.0 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Re: [Buildroot] [RFC PATCH 01/14] docs/manual: add vulnerability status and justification
Hello Thomas,
Quoted 32 lines · Thomas Perale via buildroot
In Buildroot, we can put the ignore CVEs entries in different categories:
- Vulnerability fixed by a patch.
- Vulnerability ignored because the internal tooling detect it as a false positive
- Vulnerability ignored because the database is wrong or not up-to-date.
- Vulnerability ignored because it doesn't apply to Buildroot (platform/hardware specific, ...).
- Vulnerability ignored because Buildroot is using an upstream fixed version (based on a hash for instance) while the CPE metadata reference the latest known version.Since the introduction of
_IGNORE_CVESthe justification for the vulnerability were added as a comment on top of the ignored vulnerability. With the introduction of the rule for theCVE:trailer it's now possible to distinguish the vulnerabilities that are patched from the one that are not-applicable for another unknown reason.This commit add documentation to introduce two new variables:
-
<pkg>_<vuln-id>_STATUS
-<pkg>_<vuln-id>_DETAILThis allows to have machine readable variables that are exposed and contains the reasons why a vulnerability is set as ignored instead of storing this knowledge in a comment on top of the
_IGNORE_CVESentry.The
<pkg>_<vuln-id>_STATUSsyntax is based on OpenVex statuses syntax [1][2]. This varialbe only needs to be used if a patch on the Buildroot tree isn't present.
Quoted 7 lines
The
<pkg>_<vuln-id>_DETAILis a free text field that allows to add more information to justify the status.[1] https://github.com/openvex/spec/blob/main/OPENVEX-SPEC.md#status-labels
[2] https://github.com/openvex/ospec/blob/main/OPENVEX-SPEC.md#status-justificationsSigned-off-by Thomas Perale <[email protected]>
Thanks for this proposal. Overall I find it nice and well-aligned with the Buildroot spirit.
Two comments below.
Quoted 1 line
+* +LIBFOO_<VULN-ID>_STATUS+ informs about the impact of the vulnerability
Shouldn't you indicate that these properties only make sense when <VULN-ID> is in <pkg>_IGNORE_CVES ?
docs/manual/adding-packages-generic.adoc LIBFOO_IGNORE_CVES += CVE-2020-12345 · line 530
Quoted 7 lines
docs/manual/adding-packages-generic.adoc +7
-0+ +<VULN-ID>+. This variable needs to be set only if the referenced +<VULN-ID>+ + is not fixed by a patch present in the Buildroot tree. It support different + labels based on + https://github.com/openvex/spec/blob/main/OPENVEX-SPEC.md#status-labels[OpenVex + statuses] and + https://github.com/openvex/spec/blob/main/OPENVEX-SPEC.md#status-justifications[justification]: + ** +fixed+: referenced by the package Makefile already includes the fix but
I'm sorry but here I'm unable to parse this sentence "referenced by the package Makefile already includes the fix", is my English too limited, or does the sentence really has an issue?
Thanks!
Thomas
Signature · 7 lines
Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
RFC PATCH 2/14 utils/checkpackagelib/lib_mk.py: check _STATUS value is supported
In reply to Thomas Perale via buildrootCheck that <pkg>_<vuln-id>_STATUS variable values are using a status value supported.
--- utils/checkpackagelib/lib_mk.py | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)
utils/checkpackagelib/lib_mk.py +22 -0
@@ -443,3 +443,25 @@ class CPEVariables(_CheckFunction): if field == "VALID": self.valid = {"lineno": lineno, "text": text} self.non_defaults += 1 + + +class VulnerabilityStatus(_CheckFunction): + VALID_STATUSES = [ + "fixed", + "not-affected-component-not-present", + "not-affected-vulnerable-code-not-present", + "not-affected-vulnerable-code-not-in-execute-path", + "not-affected-vulnerable-code-cannot-be-controlled-by-adversary", + ] + CVE_STATUS = re.compile(r"^[A-Z0-9_]+(CVE-\d{4}-\d+)_STATUS\s*=\s*(\S+)") + + def check_line(self, lineno, text): + m = self.CVE_STATUS.match(text.rstrip()) + if m is None: + return + status = m.group(2) + if status not in self.VALID_STATUSES: + return ["{}:{}: invalid _STATUS value '{}', expected one of: {} ({})".format( + self.filename, lineno, status, + ", ".join(self.VALID_STATUSES), self.url_to_manual), + text]
Signature · 6 lines
2.54.0 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
RFC PATCH 3/14 package/pkg-utils: show-info expose vuln details
In reply to Thomas Perale via buildrootFor each _IGNORE_CVES entries the status and details are exported if present.
- <pkg>_<vuln-id>_STATUS
- <pkg>_<vuln-id>_DETAIL
For a hypotetical 'CVE-2025-1234' that affects the package 'foo' with the following declaration:
``` FOO_CVE-2025-1234_STATUS = fixed FOO_CVE-2025-1234_DETAIL = some details ```
Will result in the following show info output.
```json
{
"foo": {
...
"cves_status": {
"CVE-2025-1234": {
"status": "fixed",
"detail": "some details"
}
}
}
}
```--- package/pkg-utils.mk | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)
package/pkg-utils.mk +19 -0
@@ -154,6 +154,25 @@ define _json-info-pkg ) \ ) ] + $(comma) "cves_status": { + $(foreach cve,$(sort $($(1)_IGNORE_CVES)), \ + $(call _json-info-pkg-cve,$(1),$(cve)) \ + ) \ + } + ) +endef + +# json-info-pkg-cve -- Create a JSON Object entry of a vulnerability id if the +# STATUS & DETAIL variable for that given package name & vulnerability +# id combination exists. +# $(1): upper-case package name +# $(2): vulnerability id +define _json-info-pkg-cve + $(if $($(1)_$(2)_STATUS), + $(call mk-json-str,$(2)): { + "status": $(call mk-json-str,$($(1)_$(2)_STATUS))$(comma) + "detail": $(call mk-json-str,$($(1)_$(2)_DETAIL)) + }$(comma) ) endef
Signature · 6 lines
2.54.0 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Re: [Buildroot] [RFC PATCH 03/14] package/pkg-utils: show-info expose vuln details
Hello,
Quoted 2 lines · Thomas Perale via buildroot
For each
_IGNORE_CVESentries the status and details are exported if present.
Perhaps this wording could be a bit nicer?
"This commit expands show-info so that for each CVE listed in the <pk>_IGNORE_CVES variable, additional information will be provided:
the status and details, according to the information provided by the following variables:
Quoted 5 lines
-
<pkg>_<vuln-id>_STATUS
-<pkg>_<vuln-id>_DETAILFor a hypotetical 'CVE-2025-1234' that affects the package 'foo' with
^^^^ h missing somewhere here ?
^^ an ?
Quoted 8 lines
the following declaration:
``` FOO_CVE-2025-1234_STATUS = fixed FOO_CVE-2025-1234_DETAIL = some details ```Will result in the following show info output.
The sentence doesn't work:
"""
For an hypothetical CVE that affects package foo with the following declaration will result in the following show info output. """
You want to change the last part so that it gives:
"""
For an hypothetical CVE that affects package foo with the following declaration, the show-info output will look like:
"""
package/pkg-utils.mk define _json-info-pkg · line 161
Quoted 13 lines
package/pkg-utils.mk +5
-0@@ -154,6 +154,25 @@ define _json-info-pkg ) \ ) ] + $(comma) "cves_status": { + $(foreach cve,$(sort $($(1)_IGNORE_CVES)), \ + $(call _json-info-pkg-cve,$(1),$(cve)) \ + ) \ + }
Don't know how we do this for the other show-info stuff, but do we want to enclose this in an $(if $($(1)_IGNORE_CVES),...) test so that we don't have an empty "cves_status" property for all packages, and instead only have one for packages that actually have ignored CVEs? (Even though admittedly it could still end up being empty, as we might have ignored CVES but no status/details).
Thanks,
Thomas
Signature · 7 lines
Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
RFC PATCH 4/14 utils/generate-cyclonedx: support vulnerability details
In reply to Thomas Perale via buildrootTranslate the OpenVex notation used to describe the vulnerabilities that aren't patched in Buildroot into the CycloneDX format.
- fixed -> resolved
- not-affected-component-not-present -> false_positive
- not-affected-vulnerable-code-not-present -> not_affected & code_not_present
- not-affected-vulnerable-code-not-in-execute-path -> not_affected & code_not_reachable
- not-affected-vulnerable-code-cannot-be-controlled-by-adversary -> not_affected & protected_by_mitigating_control
See https://cyclonedx.org/docs/1.7/json/#vulnerabilities_items_analysis
for more information
--- utils/generate-cyclonedx | 83 +++++++++++++++++++++++++++++++++------- 1 file changed, 69 insertions(+), 14 deletions(-)
utils/generate-cyclonedx +69 -14
@@ -403,6 +403,43 @@ def cyclonedx_dependency(ref, depends): "dependsOn": sorted(depends), } +def openvex_to_cyclonedx_analysis(state) -> dict: + """Convert an OpenVex vulnerability state into a CycloneDX analysis. + + Supported: + - fixed + - not-affected-component-not-present + - not-affected-vulnerable-code-not-present + - not-affected-vulnerable-code-not-in-execute-path + - not-affected-vulnerable-code-cannot-be-controlled-by-adversary + + Args: + state (str): OpenVex status string. + + Returns: + dict: CycloneDX analysis dict with 'state' and optional 'justification'. + """ + MAPPING = { + "fixed": { + "state": "resolved", + }, + "not-affected-component-not-present": { + "state": "false_positive", + }, + "not-affected-vulnerable-code-not-present": { + "state": "not_affected", + "justification": "code_not_present", + }, + "not-affected-vulnerable-code-not-in-execute-path": { + "state": "not_affected", + "justification": "code_not_reachable", + }, + "not-affected-vulnerable-code-cannot-be-controlled-by-adversary": { + "state": "not_affected", + "justification": "protected_by_mitigating_control", + }, + } + return MAPPING.get(state, {"state": "in_triage"}) def cyclonedx_vulnerabilities(show_info_dict): """Create a JSON list of vulnerabilities ignored by buildroot and associate
@@ -421,20 +458,38 @@ def cyclonedx_vulnerabilities(show_info_dict): for cve in comp.get('ignore_cves', []): cves.setdefault(cve, []).append(name) - return [{ - "id": cve, - "source": { - "name": "NVD", - "url": "https://nvd.nist.gov/vuln/detail/" + cve - }, - "analysis": { - "state": "resolved_with_pedigree" if cve in VULN_WITH_PEDIGREE else "in_triage", - "detail": f"The CVE '{cve}' has been marked as ignored by Buildroot" - }, - "affects": [ - {"ref": bomref} for bomref in components - ] - } for cve, components in cves.items()] + ret = [] + for cve, components in cves.items(): + # retrieve first occurance of the "cves_status" for this CVE. + cve_status = next( + (status for comp_name in components + if (status := show_info_dict.get(comp_name, {}).get("cves_status", {}).get(cve, {}))), + {} + ) + + if cve in VULN_WITH_PEDIGREE: + state = {"state": "resolved_with_pedigree"} + else: + state = openvex_to_cyclonedx_analysis(cve_status.get("status")) + + detail = cve_status.get("detail", f"The CVE '{cve}' has been marked as ignored by Buildroot") + + ret.append({ + "id": cve, + "source": { + "name": "NVD", + "url": "https://nvd.nist.gov/vuln/detail/" + cve + }, + "analysis": { + **state, + "detail": detail + }, + "affects": [ + {"ref": bomref} for bomref in components + ] + }) + + return ret def br2_virtual_is_provided_by(ref, show_info_dict) -> list:
Signature · 6 lines
2.54.0 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Re: [Buildroot] [RFC PATCH 04/14] utils/generate-cyclonedx: support vulnerability details
Am 24.06.26 um 16:06 schrieb Thomas Perale via buildroot:
Quoted 55 lines
Translate the OpenVex notation used to describe the vulnerabilities that aren't patched in Buildroot into the CycloneDX format.
- fixed -> resolved
- not-affected-component-not-present ->false_positive
- not-affected-vulnerable-code-not-present ->not_affected&code_not_present
- not-affected-vulnerable-code-not-in-execute-path ->not_affected&code_not_reachable
- not-affected-vulnerable-code-cannot-be-controlled-by-adversary ->not_affected&protected_by_mitigating_controlSee https://cyclonedx.org/docs/1.7/json/#vulnerabilities_items_analysis
for more informationSigned-off-by Thomas Perale <[email protected]>--- utils/generate-cyclonedx | 83 +++++++++++++++++++++++++++++++++------- 1 file changed, 69 insertions(+), 14 deletions(-)utils/generate-cyclonedx +27
-0@@ -403,6 +403,43 @@ def cyclonedx_dependency(ref, depends): "dependsOn": sorted(depends), } +def openvex_to_cyclonedx_analysis(state) -> dict: + """Convert an OpenVex vulnerability state into a CycloneDX analysis. + + Supported: + - fixed + - not-affected-component-not-present + - not-affected-vulnerable-code-not-present + - not-affected-vulnerable-code-not-in-execute-path + - not-affected-vulnerable-code-cannot-be-controlled-by-adversary + + Args: + state (str): OpenVex status string. + + Returns: + dict: CycloneDX analysis dict with 'state' and optional 'justification'. + """ + MAPPING = { + "fixed": { + "state": "resolved", + }, + "not-affected-component-not-present": { + "state": "false_positive", + }, + "not-affected-vulnerable-code-not-present": { + "state": "not_affected", + "justification": "code_not_present", + },
utils/generate-cyclonedx def cyclonedx_dependency(ref, depends): · line 442
Quoted 10 lines
utils/generate-cyclonedx +10
-0+ "not-affected-vulnerable-code-not-in-execute-path": { + "state": "not_affected", + "justification": "code_not_reachable", + }, + "not-affected-vulnerable-code-cannot-be-controlled-by-adversary": { + "state": "not_affected", + "justification": "protected_by_mitigating_control", + }, + } + return MAPPING.get(state, {"state": "in_triage"})
Maybe a bit nitpicky for an RFC, but MAPPING is a constant, so it should probably be at module level (with a prefix added to the name) instead of recreating it on every call to this function.
Best regards,
Fiona
Quoted 46 lines
utils/generate-cyclonedx +25
-14def cyclonedx_vulnerabilities(show_info_dict): """Create a JSON list of vulnerabilities ignored by buildroot and associate@@ -421,20 +458,38 @@ def cyclonedx_vulnerabilities(show_info_dict): for cve in comp.get('ignore_cves', []): cves.setdefault(cve, []).append(name) - return [{ - "id": cve, - "source": { - "name": "NVD", - "url": "https://nvd.nist.gov/vuln/detail/" + cve - }, - "analysis": { - "state": "resolved_with_pedigree" if cve in VULN_WITH_PEDIGREE else "in_triage", - "detail": f"The CVE '{cve}' has been marked as ignored by Buildroot" - }, - "affects": [ - {"ref": bomref} for bomref in components - ] - } for cve, components in cves.items()] + ret = [] + for cve, components in cves.items(): + # retrieve first occurance of the "cves_status" for this CVE. + cve_status = next( + (status for comp_name in components + if (status := show_info_dict.get(comp_name, {}).get("cves_status", {}).get(cve, {}))), + {} + ) + + if cve in VULN_WITH_PEDIGREE: + state = {"state": "resolved_with_pedigree"} + else: + state = openvex_to_cyclonedx_analysis(cve_status.get("status")) + + detail = cve_status.get("detail", f"The CVE '{cve}' has been marked as ignored by Buildroot") + + ret.append({ + "id": cve, + "source": { + "name": "NVD", + "url": "https://nvd.nist.gov/vuln/detail/" + cve + }, + "analysis": { + **state, + "detail": detail
utils/generate-cyclonedx def cyclonedx_vulnerabilities(show_info_dict): · line 495
Quoted 10 lines
utils/generate-cyclonedx +7
-0+ }, + "affects": [ + {"ref": bomref} for bomref in components + ] + }) + + return ret def br2_virtual_is_provided_by(ref, show_info_dict) -> list:
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
RFC PATCH 5/14 package/sox: add vulnerabilities details
In reply to Thomas Perale via buildrootAll the vulnerabilities have been already fixed in the upstream used by Buildroot but no new upstream version have been created. The CPE still reference the last known version.
--- package/sox/sox.mk | 41 ++++++++++++++++++++++++++++------------- 1 file changed, 28 insertions(+), 13 deletions(-)
package/sox/sox.mk +28 -13
@@ -19,45 +19,60 @@ SOX_AUTORECONF = YES SOX_AUTORECONF_OPTS = --include=$(HOST_DIR)/share/autoconf-archive SOX_INSTALL_STAGING = YES -# sox-14.4.2-6-g6e177c45 SOX_IGNORE_CVES += CVE-2017-11332 +SOX_CVE-2017-11332_STATUS = fixed +SOX_CVE-2017-11332_DETAIL = sox-14.4.2-6-g6e177c45 -# sox-14.4.2-7-ge410d00c SOX_IGNORE_CVES += CVE-2017-11358 +SOX_CVE-2017-11358_STATUS = fixed +SOX_CVE-2017-11358_DETAIL = sox-14.4.2-7-ge410d00c -# sox-14.4.2-8-g7b3f30e1 SOX_IGNORE_CVES += CVE-2017-11359 +SOX_CVE-2017-11359_STATUS = fixed +SOX_CVE-2017-11359_DETAIL = sox-14.4.2-8-g7b3f30e1 -# sox-14.4.2-9-ge076a7ad SOX_IGNORE_CVES += CVE-2017-15370 +SOX_CVE-2017-11370_STATUS = fixed +SOX_CVE-2017-11370_DETAIL = sox-14.4.2-9-ge076a7ad -# sox-14.4.2-10-g968c689a SOX_IGNORE_CVES += CVE-2017-15371 +SOX_CVE-2017-11371_STATUS = fixed +SOX_CVE-2017-11371_DETAIL = sox-14.4.2-10-g968c689a -# sox-14.4.2-11-g515b9861 SOX_IGNORE_CVES += CVE-2017-15372 +SOX_CVE-2017-11372_STATUS = fixed +SOX_CVE-2017-11372_DETAIL = sox-14.4.2-11-g515b9861 -# sox-14.4.2-12-gf56c0dbc SOX_IGNORE_CVES += CVE-2017-15642 +SOX_CVE-2017-15642_STATUS = fixed +SOX_CVE-2017-15642_DETAIL = sox-14.4.2-12-gf56c0dbc -# sox-14.4.2-13-g09d7388c # CVE-2019-1010004 is a duplicate of CVE-2017-18189 SOX_IGNORE_CVES += CVE-2017-18189 CVE-2019-1010004 +SOX_CVE-2017-18189_STATUS = fixed +SOX_CVE-2017-18189_DETAIL = sox-14.4.2-13-g09d7388c +SOX_CVE-2019-1010004_STATUS = fixed +SOX_CVE-2019-1010004_DETAIL = sox-14.4.2-13-g09d7388c -# sox-14.4.2-38-gf7091126 SOX_IGNORE_CVES += CVE-2019-8354 +SOX_CVE-2019-8354_STATUS = fixed +SOX_CVE-2019-8354_DETAIL = sox-14.4.2-38-gf7091126 -# sox-14.4.2-39-gf8587e2d SOX_IGNORE_CVES += CVE-2019-8355 +SOX_CVE-2019-8355_STATUS = fixed +SOX_CVE-2019-8355_DETAIL = sox-14.4.2-39-gf8587e2d -# sox-14.4.2-40-gb7883ae1 SOX_IGNORE_CVES += CVE-2019-8356 +SOX_CVE-2019-8356_STATUS = fixed +SOX_CVE-2019-8356_DETAIL = sox-14.4.2-40-gb7883ae1 -# sox-14.4.2-41-g2ce02fea SOX_IGNORE_CVES += CVE-2019-8357 +SOX_CVE-2019-8357_STATUS = fixed +SOX_CVE-2019-8357_DETAIL = sox-14.4.2-41-g2ce02fea -# sox-14.4.2-44-g7b6a8892 SOX_IGNORE_CVES += CVE-2019-13590 +SOX_CVE-2019-13590_STATUS = fixed +SOX_CVE-2019-13590_DETAIL = sox-14.4.2-44-g7b6a8892 # 0006-voc-word-width-should-never-be-0-to-avoid-division-b.patch # This entry is NOT stale, those CVEs are not reported by pkg-stats
Signature · 6 lines
2.54.0 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
RFC PATCH 6/14 package/php: add vulnerability details
In reply to Thomas Perale via buildrootMark the vulnerability as 'not-affected-vulnerable-code-not-present' as the vulnerability only affect windows systems.
--- package/php/php.mk | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
package/php/php.mk +2 -1
@@ -15,8 +15,9 @@ PHP_LICENSE = PHP-3.01 PHP_LICENSE_FILES = LICENSE PHP_CPE_ID_VENDOR = php -# Only affects the Windows operating system PHP_IGNORE_CVES += CVE-2024-3566 +PHP_CVE-2024-3566_STATUS = not-affected-vulnerable-code-not-present +PHP_CVE-2024-3566_DETAIL = Only affects the Windows operating system but cve.py doesn't support environment check PHP_CONF_OPTS = \ --mandir=/usr/share/man \
Signature · 6 lines
2.54.0 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
RFC PATCH 7/14 package/mupdf: add vulnerabilities details
In reply to Thomas Perale via buildrootThose vulnerabilities applies to another package and have been then marked as 'not-affected-vulnerable-code-not-present'.
--- package/mupdf/mupdf.mk | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
package/mupdf/mupdf.mk +5 -5
@@ -21,11 +21,11 @@ MUPDF_DEPENDENCIES = \ lcms2 openjpeg \ zlib -# Fix is in libfreeglut, but CVE applied to mupdf 1.23.9. -# Buildroot libfreeglut is >3.4.0 then is not affected. -MUPDF_IGNORE_CVES = \ - CVE-2024-24258 \ - CVE-2024-24259 +MUPDF_IGNORE_CVES += CVE-2024-24258 CVE-2024-24259 +MUPDF_CVE-2024-24258_STATUS = not-affected-vulnerable-code-not-present +MUPDF_CVE-2024-24258_DETAIL = Fix is in libfreeglut, but CVE applied to mupdf 1.23.9 +MUPDF_CVE-2024-24259_STATUS = not-affected-vulnerable-code-not-present +MUPDF_CVE-2024-24259_DETAIL = Fix is in libfreeglut, but CVE applied to mupdf 1.23.9 # 0001-Fix-incorrect-error-case-free-of-pixmap.patch MUPDF_IGNORE_CVES += CVE-2026-25556
Signature · 6 lines
2.54.0 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
RFC PATCH 8/14 package/python-pip: add detail to vulnerability
In reply to Thomas Perale via buildrootThe vulnerability is marked as fixed as it work as expected according to the upstream project.
--- package/python-pip/python-pip.mk | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
package/python-pip/python-pip.mk +3 -2
@@ -12,9 +12,10 @@ PYTHON_PIP_LICENSE = MIT PYTHON_PIP_LICENSE_FILES = LICENSE.txt PYTHON_PIP_CPE_ID_VENDOR = pypa PYTHON_PIP_CPE_ID_PRODUCT = pip -# Disputed CVE: things work as designed, and only affects the -# --extra-index-url option. This CVE will never be fixed. + PYTHON_PIP_IGNORE_CVES += CVE-2018-20225 +PYTHON_PIP_CVE-2018-20225_STATUS = fixed +PYTHON_PIP_CVE-2018-20225_DETAIL = Disputed CVE: things work as designed, and only affects the --extra-index-url option. This CVE will never be fixed. $(eval $(python-package)) $(eval $(host-python-package))
Signature · 6 lines
2.54.0 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Re: [Buildroot] [RFC PATCH 08/14] package/python-pip: add detail to vulnerability
Hi Thomas!
Am 24.06.26 um 16:06 schrieb Thomas Perale via buildroot:
Quoted 13 lines
The vulnerability is marked as fixed as it work as expected according to the upstream project.
Signed-off-by Thomas Perale <[email protected]>--- package/python-pip/python-pip.mk | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)package/python-pip/python-pip.mk +0
-0
package/python-pip/python-pip.mk PYTHON_PIP_LICENSE = MIT · line 18
Quoted 9 lines
package/python-pip/python-pip.mk +3
-2@@ -12,9 +12,10 @@ PYTHON_PIP_LICENSE = MIT PYTHON_PIP_LICENSE_FILES = LICENSE.txt PYTHON_PIP_CPE_ID_VENDOR = pypa PYTHON_PIP_CPE_ID_PRODUCT = pip -# Disputed CVE: things work as designed, and only affects the -# --extra-index-url option. This CVE will never be fixed. + PYTHON_PIP_IGNORE_CVES += CVE-2018-20225 +PYTHON_PIP_CVE-2018-20225_STATUS = fixed +PYTHON_PIP_CVE-2018-20225_DETAIL = Disputed CVE: things work as designed, and only affects the --extra-index-url option. This CVE will never be fixed.
I don't like using "fixed" for "upstream maintainers don't see this as a problem". Nothing was fixed, the dispute is whether anything needs fixing.
Looking at the OpenVEX status labels "not_affected" or "under_investigation" seem to fit better (depending on whether we agree with upstream or not, I guess if we don't adding to IGNORE_CVES would be questionable), but I don't see any way to clearly express "disputed" among those options.
Best regards,
Fiona
package/python-pip/python-pip.mk PYTHON_PIP_LICENSE = MIT · line 21
Quoted 3 lines
package/python-pip/python-pip.mk +0
-0$(eval $(python-package)) $(eval $(host-python-package))
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
Re: [Buildroot] [RFC PATCH 08/14] package/python-pip: add detail to vulnerability
Hi Fiona,
Thanks for already taking the time to look at this series.
In reply of:
Quoted 9 lines
Hi Thomas!
Am 24.06.26 um 16:06 schrieb Thomas Perale via buildroot:
Quoted 6 lines
The vulnerability is marked as fixed as it work as expected according to the upstream project.
Quoted 1 line
Signed-off-by Thomas Perale <[email protected]>--- package/python-pip/python-pip.mk | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
Quoted 17 lines
Quoted 5 lines
package/python-pip/python-pip.mk
Quoted 1 line
package/python-pip/python-pip.mk +0
-0index
d12bea3225..ae9a4225eb100644package/python-pip/python-pip.mk PYTHON_PIP_LICENSE = MIT · line 18
Quoted 9 lines
package/python-pip/python-pip.mk +3
-2@@ -12,9 +12,10 @@ PYTHON_PIP_LICENSE = MIT PYTHON_PIP_LICENSE_FILES = LICENSE.txt PYTHON_PIP_CPE_ID_VENDOR = pypa PYTHON_PIP_CPE_ID_PRODUCT = pip -# Disputed CVE: things work as designed, and only affects the -# --extra-index-url option. This CVE will never be fixed. + PYTHON_PIP_IGNORE_CVES += CVE-2018-20225 +PYTHON_PIP_CVE-2018-20225_STATUS = fixed +PYTHON_PIP_CVE-2018-20225_DETAIL = Disputed CVE: things work as designed, and only affects the --extra-index-url option. This CVE will never be fixed.I don't like using "fixed" for "upstream maintainers don't see this as a problem". Nothing was fixed, the dispute is whether anything needs fixing.
I definitely agree and I don't like it either but I feel that the options OpenVex and CycloneDX provides are limited for that specific case.
If I understand correctly it's because you need to actually put the upstream project justification in a category.
For example for the flex example the project disputed the vulnerability by claiming it doesn't produce a vulnerable code so I used the "not-affected-vulnerable-code-not-present" category.
Here my logic was that since it's the expected behavior it's not a vulnerability at all and then could mark it as fixed. But indeed I over-interpret the "fixed" category.
Quoted 1 line
Looking at the OpenVEX status labels "
not_affected" or "under_investigation" seem to fit better (depending on whether we agree with upstream or not, I guess if we don't adding toIGNORE_CVESwould be questionable), but I don't see any way to clearly express "disputed" among those options.
For the "under_investigation", it means this would map to "in_triage" for CycloneDX and that's what I'm trying to remove with this series to be able to filter any vulnerabilities that don't provide a "status".
For "not_affected" the spec specify that we need to provide a justification with it [1]. But I don't see a justification that really suits this specific case.
To be honest, the more I look at the categories and the one I already assigned to the packages the more I think other categories could be used as a justification. It's really confusing.
Best regards,
PERALE Thomas
[1] https://cyclonedx.org/docs/1.7/json/#vulnerabilities_items_analysis_justification
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
RFC PATCH 9/14 package/luajit: add details to vulnerabilities
In reply to Thomas Perale via buildrootThose vulnerabilities has already been addressed upstream but no new package version have been released with those fixes.
--- package/luajit/luajit.mk | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-)
package/luajit/luajit.mk +10 -5
@@ -12,20 +12,25 @@ LUAJIT_CPE_ID_VENDOR = luajit LUAJIT_CPE_ID_VERSION = 2.1.0 LUAJIT_CPE_ID_UPDATE = beta3 -# Fixed in 53f82e6e2e858a0a62fd1a2ff47e9866693382e6 LUAJIT_IGNORE_CVES += CVE-2020-15890 +LUAJIT_CVE-2020-15890_STATUS = fixed +LUAJIT_CVE-2020-15890_DETAIL = 53f82e6e2e858a0a62fd1a2ff47e9866693382e6 -# Fixed in e296f56b825c688c3530a981dc6b495d972f3d01 LUAJIT_IGNORE_CVES += CVE-2020-24372 +LUAJIT_CVE-2020-24372_STATUS = fixed +LUAJIT_CVE-2020-24372_DETAIL = e296f56b825c688c3530a981dc6b495d972f3d01 -# Fixed in 343ce0edaf3906a62022936175b2f5410024cbfc LUAJIT_IGNORE_CVES += CVE-2024-25176 +LUAJIT_CVE-2024-25176_STATUS = fixed +LUAJIT_CVE-2024-25176_DETAIL = 343ce0edaf3906a62022936175b2f5410024cbfc -# Fixed in 85b4fed0b0353dd78c8c875c2f562d522a2b310f LUAJIT_IGNORE_CVES += CVE-2024-25177 +LUAJIT_CVE-2024-25177_STATUS = fixed +LUAJIT_CVE-2024-25177_DETAIL = 85b4fed0b0353dd78c8c875c2f562d522a2b310f -# Fixed in defe61a56751a0db5f00ff3ab7b8f45436ba74c8 LUAJIT_IGNORE_CVES += CVE-2024-25178 +LUAJIT_CVE-2024-25178_STATUS = fixed +LUAJIT_CVE-2024-25178_DETAIL = defe61a56751a0db5f00ff3ab7b8f45436ba74c8 LUAJIT_INSTALL_STAGING = YES
Signature · 6 lines
2.54.0 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
RFC PATCH 10/14 package/libuci: add vulnerability details
In reply to Thomas Perale via buildrootThose vulnerabilities has already been addressed upstream but no new package version have been released with those fixes.
--- package/libuci/libuci.mk | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
package/libuci/libuci.mk +2 -1
@@ -13,8 +13,9 @@ LIBUCI_CPE_ID_VENDOR = openwrt LIBUCI_INSTALL_STAGING = YES LIBUCI_DEPENDENCIES = libubox -# Fixed in commit 19e29ffc15dbd958e8e6a648ee0982c68353516f, older than LIBUCI_VERSION LIBUCI_IGNORE_CVES += CVE-2019-15513 +LIBUCI_CVE-2019-15513_STATUS = fixed +LIBUCI_CVE-2019-15513_DETAIL = 19e29ffc15dbd958e8e6a648ee0982c68353516f ifeq ($(BR2_PACKAGE_LUA_5_1),y) LIBUCI_DEPENDENCIES += lua
Signature · 6 lines
2.54.0 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
RFC PATCH 11/14 package/glibc: add vulnerability details
In reply to Thomas Perale via buildrootThose vulnerabilities has already been addressed upstream but no new package version have been released with those fixes.
The CVE-2010-4756 is not considered as a security issue by the upstream project and is then marked as fixed.
--- package/glibc/glibc.mk | 32 ++++++++++++++++++++------------ 1 file changed, 20 insertions(+), 12 deletions(-)
package/glibc/glibc.mk +20 -12
@@ -19,37 +19,45 @@ GLIBC_CPE_ID_VENDOR = gnu # allow proper matching with the CPE database. GLIBC_CPE_ID_VERSION = $(word 1, $(subst -,$(space),$(GLIBC_VERSION))) -# Fixed by glibc-2.41-64-g1e16d0096d80a6e12d5bfa8e0aafdd13c47efd65 GLIBC_IGNORE_CVES += CVE-2025-8058 +GLIBC_CVE-2026-8058_STATUS = fixed +GLIBC_CVE-2026-8058_DETAIL = glibc-2.41-64-g1e16d0096d80a6e12d5bfa8e0aafdd13c47efd65 -# Fixed by glibc-2.42-49-gb0ec8fb689df862171f0f78994a3bdeb51313545 GLIBC_IGNORE_CVES += CVE-2026-0861 +GLIBC_CVE-2026-0861_STATUS = fixed +GLIBC_CVE-2026-0861_DETAIL = glibc-2.42-49-gb0ec8fb689df862171f0f78994a3bdeb51313545 -# Fixed by glibc-2.42-50-g453e6b8dbab935257eb0802b0c97bca6b67ba30e GLIBC_IGNORE_CVES += CVE-2026-0915 +GLIBC_CVE-2026-0915_STATUS = fixed +GLIBC_CVE-2026-0915_DETAIL = glibc-2.42-50-g453e6b8dbab935257eb0802b0c97bca6b67ba30e -# Fixed by glibc-2.42-51-gcbf39c26b25801e9bc88499b4fd361ac172d4125 GLIBC_IGNORE_CVES += CVE-2025-15281 +GLIBC_CVE-2025-15281_STATUS = fixed +GLIBC_CVE-2025-15281_DETAIL = glibc-2.42-51-gcbf39c26b25801e9bc88499b4fd361ac172d4125 -# Fixed by glibc-2.43-16-g5c6fca0c62ce5bd6e68e259f138097756cbafd4d GLIBC_IGNORE_CVES += CVE-2026-4437 +GLIBC_CVE-2026-4437_STATUS = fixed +GLIBC_CVE-2026-4437_DETAIL = glibc-2.43-16-g5c6fca0c62ce5bd6e68e259f138097756cbafd4d -# Fixed by glibc-2.43-17-gdd9945c0ba40d2dbc9eb7c99291ba6b69bd66718 GLIBC_IGNORE_CVES += CVE-2026-4438 +GLIBC_CVE-2026-4438_STATUS = fixed +GLIBC_CVE-2026-4438_DETAIL = glibc-2.43-17-gdd9945c0ba40d2dbc9eb7c99291ba6b69bd66718 -# Fixed by glibc-2.43-22-g8362e8ce10b24068bacc19552c128dd10e082fd9 GLIBC_IGNORE_CVES += CVE-2026-4046 +GLIBC_CVE-2026-4046_STATUS = fixed +GLIBC_CVE-2026-4046_DETAIL = glibc-2.43-22-g8362e8ce10b24068bacc19552c128dd10e082fd9 -# Fixed by glibc-2.43-26-g2890b35cd361df2517525bf2c5f8c63f6f0d4a20 GLIBC_IGNORE_CVES += CVE-2026-5928 +GLIBC_CVE-2026-5928_STATUS = fixed +GLIBC_CVE-2026-5928_DETAIL = glibc-2.43-26-g2890b35cd361df2517525bf2c5f8c63f6f0d4a20 -# Fixed by glibc-2.43-27-g4070d808bea1c077eb7e7d52b52b91cae98205d5 GLIBC_IGNORE_CVES += CVE-2026-5450 +GLIBC_CVE-2026-5450_STATUS = fixed +GLIBC_CVE-2026-5450_DETAIL = glibc-2.43-27-g4070d808bea1c077eb7e7d52b52b91cae98205d5 -# This CVE is considered as not being security issues by -# upstream glibc: -# https://security-tracker.debian.org/tracker/CVE-2010-4756 GLIBC_IGNORE_CVES += CVE-2010-4756 +GLIBC_CVE-2010-4756_STATUS = fixed +GLIBC_CVE-2010-4756_DETAIL = This CVE is considered as not being security issues by upstream glibc: https://security-tracker.debian.org/tracker/CVE-2010-4756 # glibc is part of the toolchain so disable the toolchain dependency GLIBC_ADD_TOOLCHAIN_DEPENDENCY = NO
Signature · 6 lines
2.54.0 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Re: [Buildroot] [RFC PATCH 11/14] package/glibc: add vulnerability details
Hello Thomas, All,
Le 24/06/2026 à 16:06, Thomas Perale via buildroot a écrit :
Quoted 16 lines
Those vulnerabilities has already been addressed upstream but no new package version have been released with those fixes.
The CVE-2010-4756 is not considered as a security issue by the upstream project and is then marked as fixed.
Signed-off-by Thomas Perale <[email protected]>--- package/glibc/glibc.mk | 32 ++++++++++++++++++++------------ 1 file changed, 20 insertions(+), 12 deletions(-)package/glibc/glibc.mk +0
-0
package/glibc/glibc.mk GLIBC_CPE_ID_VENDOR = gnu · line 24
Quoted 7 lines
package/glibc/glibc.mk +2
-1@@ -19,37 +19,45 @@ GLIBC_CPE_ID_VENDOR = gnu # allow proper matching with the CPE database. GLIBC_CPE_ID_VERSION = $(word 1, $(subst -,$(space),$(GLIBC_VERSION))) -# Fixed by glibc-2.41-64-g1e16d0096d80a6e12d5bfa8e0aafdd13c47efd65 GLIBC_IGNORE_CVES += CVE-2025-8058 +GLIBC_CVE-2026-8058_STATUS = fixed +GLIBC_CVE-2026-8058_DETAIL = glibc-2.41-64-g1e16d0096d80a6e12d5bfa8e0aafdd13c47efd65
While updating my mailbox, I noticed this typo: CVE-2025-8058 vs CVE-2026-8058
Maybe checkpackage could check for this?
Best regards,
Romain
Quoted 40 lines
package/glibc/glibc.mk +16
-8-# Fixed by glibc-2.42-49-gb0ec8fb689df862171f0f78994a3bdeb51313545 GLIBC_IGNORE_CVES += CVE-2026-0861 +GLIBC_CVE-2026-0861_STATUS = fixed +GLIBC_CVE-2026-0861_DETAIL = glibc-2.42-49-gb0ec8fb689df862171f0f78994a3bdeb51313545 -# Fixed by glibc-2.42-50-g453e6b8dbab935257eb0802b0c97bca6b67ba30e GLIBC_IGNORE_CVES += CVE-2026-0915 +GLIBC_CVE-2026-0915_STATUS = fixed +GLIBC_CVE-2026-0915_DETAIL = glibc-2.42-50-g453e6b8dbab935257eb0802b0c97bca6b67ba30e -# Fixed by glibc-2.42-51-gcbf39c26b25801e9bc88499b4fd361ac172d4125 GLIBC_IGNORE_CVES += CVE-2025-15281 +GLIBC_CVE-2025-15281_STATUS = fixed +GLIBC_CVE-2025-15281_DETAIL = glibc-2.42-51-gcbf39c26b25801e9bc88499b4fd361ac172d4125 -# Fixed by glibc-2.43-16-g5c6fca0c62ce5bd6e68e259f138097756cbafd4d GLIBC_IGNORE_CVES += CVE-2026-4437 +GLIBC_CVE-2026-4437_STATUS = fixed +GLIBC_CVE-2026-4437_DETAIL = glibc-2.43-16-g5c6fca0c62ce5bd6e68e259f138097756cbafd4d -# Fixed by glibc-2.43-17-gdd9945c0ba40d2dbc9eb7c99291ba6b69bd66718 GLIBC_IGNORE_CVES += CVE-2026-4438 +GLIBC_CVE-2026-4438_STATUS = fixed +GLIBC_CVE-2026-4438_DETAIL = glibc-2.43-17-gdd9945c0ba40d2dbc9eb7c99291ba6b69bd66718 -# Fixed by glibc-2.43-22-g8362e8ce10b24068bacc19552c128dd10e082fd9 GLIBC_IGNORE_CVES += CVE-2026-4046 +GLIBC_CVE-2026-4046_STATUS = fixed +GLIBC_CVE-2026-4046_DETAIL = glibc-2.43-22-g8362e8ce10b24068bacc19552c128dd10e082fd9 -# Fixed by glibc-2.43-26-g2890b35cd361df2517525bf2c5f8c63f6f0d4a20 GLIBC_IGNORE_CVES += CVE-2026-5928 +GLIBC_CVE-2026-5928_STATUS = fixed +GLIBC_CVE-2026-5928_DETAIL = glibc-2.43-26-g2890b35cd361df2517525bf2c5f8c63f6f0d4a20 -# Fixed by glibc-2.43-27-g4070d808bea1c077eb7e7d52b52b91cae98205d5 GLIBC_IGNORE_CVES += CVE-2026-5450 +GLIBC_CVE-2026-5450_STATUS = fixed +GLIBC_CVE-2026-5450_DETAIL = glibc-2.43-27-g4070d808bea1c077eb7e7d52b52b91cae98205d5
package/glibc/glibc.mk GLIBC_CPE_ID_VENDOR = gnu · line 63
Quoted 10 lines
package/glibc/glibc.mk +2
-3-# This CVE is considered as not being security issues by -# upstream glibc: -# https://security-tracker.debian.org/tracker/CVE-2010-4756 GLIBC_IGNORE_CVES += CVE-2010-4756 +GLIBC_CVE-2010-4756_STATUS = fixed +GLIBC_CVE-2010-4756_DETAIL = This CVE is considered as not being security issues by upstream glibc: https://security-tracker.debian.org/tracker/CVE-2010-4756 # glibc is part of the toolchain so disable the toolchain dependency GLIBC_ADD_TOOLCHAIN_DEPENDENCY = NO
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
Re: [Buildroot] [RFC PATCH 11/14] package/glibc: add vulnerability details
Hi Romain,
In reply of:
Quoted 29 lines
Hello Thomas, All,
Le 24/06/2026 à 16:06, Thomas Perale via buildroot a écrit :
Quoted 16 lines
Those vulnerabilities has already been addressed upstream but no new package version have been released with those fixes.
The CVE-2010-4756 is not considered as a security issue by the upstream project and is then marked as fixed.
Signed-off-by Thomas Perale <[email protected]>--- package/glibc/glibc.mk | 32 ++++++++++++++++++++------------ 1 file changed, 20 insertions(+), 12 deletions(-)package/glibc/glibc.mk +0
-0package/glibc/glibc.mk GLIBC_CPE_ID_VENDOR = gnu · line 24
Quoted 7 lines
package/glibc/glibc.mk +2
-1@@ -19,37 +19,45 @@ GLIBC_CPE_ID_VENDOR = gnu # allow proper matching with the CPE database. GLIBC_CPE_ID_VERSION = $(word 1, $(subst -,$(space),$(GLIBC_VERSION))) -# Fixed by glibc-2.41-64-g1e16d0096d80a6e12d5bfa8e0aafdd13c47efd65 GLIBC_IGNORE_CVES += CVE-2025-8058 +GLIBC_CVE-2026-8058_STATUS = fixed +GLIBC_CVE-2026-8058_DETAIL = glibc-2.41-64-g1e16d0096d80a6e12d5bfa8e0aafdd13c47efd65While updating my mailbox, I noticed this typo: CVE-2025-8058 vs CVE-2026-8058
Quoted 4 lines
Maybe checkpackage could check for this?
Best regards,
Romain
Good catch thanks ! I will add this to the checkpackage check I added for the "_STATUS" content.
Quoted 48 lines
Quoted 48 lines
package/glibc/glibc.mk +18
-11-# Fixed by glibc-2.42-49-gb0ec8fb689df862171f0f78994a3bdeb51313545 GLIBC_IGNORE_CVES += CVE-2026-0861 +GLIBC_CVE-2026-0861_STATUS = fixed +GLIBC_CVE-2026-0861_DETAIL = glibc-2.42-49-gb0ec8fb689df862171f0f78994a3bdeb51313545 -# Fixed by glibc-2.42-50-g453e6b8dbab935257eb0802b0c97bca6b67ba30e GLIBC_IGNORE_CVES += CVE-2026-0915 +GLIBC_CVE-2026-0915_STATUS = fixed +GLIBC_CVE-2026-0915_DETAIL = glibc-2.42-50-g453e6b8dbab935257eb0802b0c97bca6b67ba30e -# Fixed by glibc-2.42-51-gcbf39c26b25801e9bc88499b4fd361ac172d4125 GLIBC_IGNORE_CVES += CVE-2025-15281 +GLIBC_CVE-2025-15281_STATUS = fixed +GLIBC_CVE-2025-15281_DETAIL = glibc-2.42-51-gcbf39c26b25801e9bc88499b4fd361ac172d4125 -# Fixed by glibc-2.43-16-g5c6fca0c62ce5bd6e68e259f138097756cbafd4d GLIBC_IGNORE_CVES += CVE-2026-4437 +GLIBC_CVE-2026-4437_STATUS = fixed +GLIBC_CVE-2026-4437_DETAIL = glibc-2.43-16-g5c6fca0c62ce5bd6e68e259f138097756cbafd4d -# Fixed by glibc-2.43-17-gdd9945c0ba40d2dbc9eb7c99291ba6b69bd66718 GLIBC_IGNORE_CVES += CVE-2026-4438 +GLIBC_CVE-2026-4438_STATUS = fixed +GLIBC_CVE-2026-4438_DETAIL = glibc-2.43-17-gdd9945c0ba40d2dbc9eb7c99291ba6b69bd66718 -# Fixed by glibc-2.43-22-g8362e8ce10b24068bacc19552c128dd10e082fd9 GLIBC_IGNORE_CVES += CVE-2026-4046 +GLIBC_CVE-2026-4046_STATUS = fixed +GLIBC_CVE-2026-4046_DETAIL = glibc-2.43-22-g8362e8ce10b24068bacc19552c128dd10e082fd9 -# Fixed by glibc-2.43-26-g2890b35cd361df2517525bf2c5f8c63f6f0d4a20 GLIBC_IGNORE_CVES += CVE-2026-5928 +GLIBC_CVE-2026-5928_STATUS = fixed +GLIBC_CVE-2026-5928_DETAIL = glibc-2.43-26-g2890b35cd361df2517525bf2c5f8c63f6f0d4a20 -# Fixed by glibc-2.43-27-g4070d808bea1c077eb7e7d52b52b91cae98205d5 GLIBC_IGNORE_CVES += CVE-2026-5450 +GLIBC_CVE-2026-5450_STATUS = fixed +GLIBC_CVE-2026-5450_DETAIL = glibc-2.43-27-g4070d808bea1c077eb7e7d52b52b91cae98205d5 -# This CVE is considered as not being security issues by -# upstream glibc: -# https://security-tracker.debian.org/tracker/CVE-2010-4756 GLIBC_IGNORE_CVES += CVE-2010-4756 +GLIBC_CVE-2010-4756_STATUS = fixed +GLIBC_CVE-2010-4756_DETAIL = This CVE is considered as not being security issues by upstream glibc: https://security-tracker.debian.org/tracker/CVE-2010-4756
Quoted 7 lines
package/glibc/glibc.mk GLIBC_CPE_ID_VENDOR = gnu · line 63
Quoted 2 lines
package/glibc/glibc.mk +0
-0# glibc is part of the toolchain so disable the toolchain dependency GLIBC_ADD_TOOLCHAIN_DEPENDENCY = NO_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
RFC PATCH 12/14 package/freeradius-server: add vulnerabilities details
In reply to Thomas Perale via buildrootThose vulnerabilities has already been addressed upstream but the NVD entries are wrong.
--- package/freeradius-server/freeradius-server.mk | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
package/freeradius-server/freeradius-server.mk +4 -3
@@ -15,12 +15,13 @@ FREERADIUS_SERVER_CPE_ID_PRODUCT = freeradius FREERADIUS_SERVER_DEPENDENCIES = libtalloc FREERADIUS_SERVER_AUTORECONF = YES -# Mitigated upstream since version 0.5.0, NVD database entry not -# up-to-date FREERADIUS_SERVER_IGNORE_CVES += CVE-2002-0318 +FREERADIUS_CVE-2002-0318_STATUS = fixed +FREERADIUS_CVE-2002-0318_DETAIL = Mitigated upstream since version 0.5.0, NVD database entry not up-to-date -# Fixed in 2.2.0, NVD database entry not up-to-date FREERADIUS_SERVER_IGNORE_CVES += CVE-2011-4966 +FREERADIUS_CVE-2011-4966_STATUS = fixed +FREERADIUS_CVE-2011-4966_DETAIL = Fixed in 2.2.0, NVD database entry not up-to-date # We're patching src/modules/rlm_krb5/configure.ac define FREERADIUS_SERVER_RUN_KRB5_AUTORECONF
Signature · 6 lines
2.54.0 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
RFC PATCH 13/14 package/flex: add vulnerability details
In reply to Thomas Perale via buildrootThe upstream project as discarded the vulnerability as it works as expected.
--- package/flex/flex.mk | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
package/flex/flex.mk +4 -3
@@ -10,12 +10,13 @@ FLEX_INSTALL_STAGING = YES FLEX_LICENSE = FLEX FLEX_LICENSE_FILES = COPYING FLEX_CPE_ID_VENDOR = westes -# bug does not cause stack overflows in the generated code and has been -# noted upstream as a bug in the code generator -FLEX_IGNORE_CVES = CVE-2019-6293 FLEX_DEPENDENCIES = $(TARGET_NLS_DEPENDENCIES) host-m4 HOST_FLEX_DEPENDENCIES = host-m4 +FLEX_IGNORE_CVES = CVE-2019-6293 +FLEX_CVE-2019-6293_STATUS = not-affected-vulnerable-code-not-present +FLEX_CVE-2019-6293_DETAIL = bug does not cause stack overflows in the generated code and has been noted upstream as a bug in the code generator + # 0001-build-AC_USE_SYSTEM_EXTENSIONS-in-configure.ac.patch # 0002-build-make-it-possible-to-disable-the-build-of-the-f.patch # 0003-build-make-it-possible-to-disable-the-build-of-the-d.patch
Signature · 6 lines
2.54.0 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
RFC PATCH 14/14 package/clamav: add vulnerability details
In reply to Thomas Perale via buildrootThis vulnerability only affects Cisco device and is then marked as not present in this case.
--- package/clamav/clamav.mk | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
package/clamav/clamav.mk +4 -2
@@ -21,8 +21,6 @@ CLAMAV_LICENSE_FILES = \ COPYING/COPYING.zlib CLAMAV_CPE_ID_VENDOR = clamav CLAMAV_SELINUX_MODULES = clamav -# affects only Cisco devices -CLAMAV_IGNORE_CVES += CVE-2016-1405 CLAMAV_DEPENDENCIES = \ bzip2 \ host-pkgconf \
@@ -36,6 +34,10 @@ CLAMAV_DEPENDENCIES = \ zlib \ $(TARGET_NLS_DEPENDENCIES) +CLAMAV_IGNORE_CVES += CVE-2016-1405 +CLAMAV_CVE-2016-1405_STATUS = not-affected-vulnerable-code-not-present +CLAMAV_CVE-2016-1405_DETAIL = affects only Cisco devices + ifeq ($(BR2_TOOLCHAIN_HAS_LIBATOMIC),y) CLAMAV_LIBS += -latomic endif
Signature · 6 lines
2.54.0 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot