Skip to contentSkip to conversation

sctp: disable BH before calling udp_tunnel_xmit_skb()

PATCH New Alexander Martyniuk 1 participant 3 messages Jun 25

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

cover sctp: disable BH before calling udp_tunnel_xmit_skb()

Fixes CVE-2026-53070: sctp: disable BH before calling udp_tunnel_xmit_skb()

Petr Machata (1):
net: ipv6: Make udp_tunnel6_xmit_skb() void

Xin Long (1):
sctp: disable BH before calling udp_tunnel_xmit_skb()

 include/net/udp_tunnel.h  | 14 +++++++-------
 net/ipv6/ip6_udp_tunnel.c | 15 +++++++--------
 net/sctp/ipv6.c           |  9 ++++++---
 net/sctp/protocol.c       |  2 ++
 net/tipc/udp_media.c      | 10 +++++-----
 5 files changed, 27 insertions(+), 23 deletions(-)
Signature · 1 line
2.43.0
#1 lore raw

PATCH 1/2 net: ipv6: Make udp_tunnel6_xmit_skb() void

From: Petr Machata <[email protected]>

commit 6a7d88ca15f73c5c570c372238f71d63da1fda55 upstream.

The function always returns zero, thus the return value does not carry any signal. Just make it void.

Most callers already ignore the return value. However:

- Refold arguments of the call from sctp_v6_xmit() so that they fit into the 80-column limit.

- tipc_udp_xmit() initializes err from the return value, but that should already be always zero at that point. So there's no practical change, but elision of the assignment prompts a couple more tweaks to clean up the function.

---
 include/net/udp_tunnel.h  | 14 +++++++-------
 net/ipv6/ip6_udp_tunnel.c | 15 +++++++--------
 net/sctp/ipv6.c           |  7 ++++---
 net/tipc/udp_media.c      | 10 +++++-----
 4 files changed, 23 insertions(+), 23 deletions(-)
include/net/udp_tunnel.h +7 -7
index 6e2c5c77031f..8ed36ec520d7 100644
@@ -152,13 +152,13 @@ void udp_tunnel_xmit_skb(struct rtable *rt, struct sock *sk, struct sk_buff *skb
 			 __be16 df, __be16 src_port, __be16 dst_port,
 			 bool xnet, bool nocheck);
 
-int udp_tunnel6_xmit_skb(struct dst_entry *dst, struct sock *sk,
-			 struct sk_buff *skb,
-			 struct net_device *dev,
-			 const struct in6_addr *saddr,
-			 const struct in6_addr *daddr,
-			 __u8 prio, __u8 ttl, __be32 label,
-			 __be16 src_port, __be16 dst_port, bool nocheck);
+void udp_tunnel6_xmit_skb(struct dst_entry *dst, struct sock *sk,
+			  struct sk_buff *skb,
+			  struct net_device *dev,
+			  const struct in6_addr *saddr,
+			  const struct in6_addr *daddr,
+			  __u8 prio, __u8 ttl, __be32 label,
+			  __be16 src_port, __be16 dst_port, bool nocheck);
 
 void udp_tunnel_sock_release(struct socket *sock);
 
net/ipv6/ip6_udp_tunnel.c +7 -8
index 2acf1bb93fc0..f22eff2ba77c 100644
@@ -74,13 +74,13 @@ int udp_sock_create6(struct net *net, struct udp_port_cfg *cfg,
 }
 EXPORT_SYMBOL_GPL(udp_sock_create6);
 
-int udp_tunnel6_xmit_skb(struct dst_entry *dst, struct sock *sk,
-			 struct sk_buff *skb,
-			 struct net_device *dev,
-			 const struct in6_addr *saddr,
-			 const struct in6_addr *daddr,
-			 __u8 prio, __u8 ttl, __be32 label,
-			 __be16 src_port, __be16 dst_port, bool nocheck)
+void udp_tunnel6_xmit_skb(struct dst_entry *dst, struct sock *sk,
+			  struct sk_buff *skb,
+			  struct net_device *dev,
+			  const struct in6_addr *saddr,
+			  const struct in6_addr *daddr,
+			  __u8 prio, __u8 ttl, __be32 label,
+			  __be16 src_port, __be16 dst_port, bool nocheck)
 {
 	struct udphdr *uh;
 	struct ipv6hdr *ip6h;
@@ -109,7 +109,6 @@ int udp_tunnel6_xmit_skb(struct dst_entry *dst, struct sock *sk,
 	ip6h->saddr	  = *saddr;
 
 	ip6tunnel_xmit(sk, skb, dev);
-	return 0;
 }
 EXPORT_SYMBOL_GPL(udp_tunnel6_xmit_skb);
 
net/sctp/ipv6.c +4 -3
index 9f835e674c59..b4c321bad033 100644
@@ -261,9 +261,10 @@ static int sctp_v6_xmit(struct sk_buff *skb, struct sctp_transport *t)
 	skb_set_inner_ipproto(skb, IPPROTO_SCTP);
 	label = ip6_make_flowlabel(sock_net(sk), skb, fl6->flowlabel, true, fl6);
 
-	return udp_tunnel6_xmit_skb(dst, sk, skb, NULL, &fl6->saddr,
-				    &fl6->daddr, tclass, ip6_dst_hoplimit(dst),
-				    label, sctp_sk(sk)->udp_port, t->encap_port, false);
+	udp_tunnel6_xmit_skb(dst, sk, skb, NULL, &fl6->saddr, &fl6->daddr,
+			     tclass, ip6_dst_hoplimit(dst), label,
+			     sctp_sk(sk)->udp_port, t->encap_port, false);
+	return 0;
 }
 
 /* Returns the dst cache entry for the given source and destination ip
net/tipc/udp_media.c +5 -5
index 258d6aa4f21a..1b8d6bbf8a8e 100644
@@ -172,7 +172,7 @@ static int tipc_udp_xmit(struct net *net, struct sk_buff *skb,
 			 struct udp_media_addr *dst, struct dst_cache *cache)
 {
 	struct dst_entry *ndst;
-	int ttl, err = 0;
+	int ttl, err;
 
 	local_bh_disable();
 	ndst = dst_cache_get(cache);
@@ -217,13 +217,13 @@ static int tipc_udp_xmit(struct net *net, struct sk_buff *skb,
 			dst_cache_set_ip6(cache, ndst, &fl6.saddr);
 		}
 		ttl = ip6_dst_hoplimit(ndst);
-		err = udp_tunnel6_xmit_skb(ndst, ub->ubsock->sk, skb, NULL,
-					   &src->ipv6, &dst->ipv6, 0, ttl, 0,
-					   src->port, dst->port, false);
+		udp_tunnel6_xmit_skb(ndst, ub->ubsock->sk, skb, NULL,
+				     &src->ipv6, &dst->ipv6, 0, ttl, 0,
+				     src->port, dst->port, false);
 #endif
 	}
 	local_bh_enable();
-	return err;
+	return 0;
 
 tx_error:
 	local_bh_enable();
Signature · 1 line
2.43.0
#2 lore raw

PATCH 2/2 sctp: disable BH before calling udp_tunnel_xmit_skb()

In reply to Alexander Martyniuk

From: Xin Long <[email protected]>

commit 2cd7e6971fc2787408ceef17906ea152791448cf upstream.

udp_tunnel_xmit_skb() / udp_tunnel6_xmit_skb() are expected to run with BH disabled. After commit 6f1a9140ecda ("add xmit recursion limit to tunnel xmit functions"), on the path:

udp(6)_tunnel_xmit_skb() -> ip(6)tunnel_xmit()

dev_xmit_recursion_inc()/dec() must stay balanced on the same CPU.

Without local_bh_disable(), the context may move between CPUs, which can break the inc/dec pairing. This may lead to incorrect recursion level detection and cause packets to be dropped in ip(6)_tunnel_xmit() or __dev_queue_xmit().

Fix it by disabling BH around both IPv4 and IPv6 SCTP UDP xmit paths.

In my testing, after enabling the SCTP over UDP:

  # ip net exec ha sysctl -w net.sctp.udp_port=9899
  # ip net exec ha sysctl -w net.sctp.encap_port=9899
  # ip net exec hb sysctl -w net.sctp.udp_port=9899
  # ip net exec hb sysctl -w net.sctp.encap_port=9899
  # ip net exec ha iperf3 -s

- without this patch:

  # ip net exec hb iperf3 -c 192.168.0.1 --sctp
  [  5]   0.00-10.00  sec  37.2 MBytes  31.2 Mbits/sec  sender
  [  5]   0.00-10.00  sec  37.1 MBytes  31.1 Mbits/sec  receiver

- with this patch:

  # ip net exec hb iperf3 -c 192.168.0.1 --sctp
  [  5]   0.00-10.00  sec  3.14 GBytes  2.69 Gbits/sec  sender
  [  5]   0.00-10.00  sec  3.14 GBytes  2.69 Gbits/sec  receiver
Fixes 6f1a9140ecda ("net: add xmit recursion limit to tunnel xmit functions")
Fixes 046c052b475e ("sctp: enable udp tunneling socks")
---
 net/sctp/ipv6.c     | 2 ++
 net/sctp/protocol.c | 2 ++
 2 files changed, 4 insertions(+)
net/sctp/ipv6.c +2 -0
index b4c321bad033..b45cc51dfc35 100644
@@ -261,9 +261,11 @@ static int sctp_v6_xmit(struct sk_buff *skb, struct sctp_transport *t)
 	skb_set_inner_ipproto(skb, IPPROTO_SCTP);
 	label = ip6_make_flowlabel(sock_net(sk), skb, fl6->flowlabel, true, fl6);
 
+	local_bh_disable();
 	udp_tunnel6_xmit_skb(dst, sk, skb, NULL, &fl6->saddr, &fl6->daddr,
 			     tclass, ip6_dst_hoplimit(dst), label,
 			     sctp_sk(sk)->udp_port, t->encap_port, false);
+	local_bh_enable();
 	return 0;
 }
 
net/sctp/protocol.c +2 -0
index 39ca5403d4d7..6ea15361088b 100644
@@ -1086,9 +1086,11 @@ static inline int sctp_v4_xmit(struct sk_buff *skb, struct sctp_transport *t)
 	skb_reset_inner_mac_header(skb);
 	skb_reset_inner_transport_header(skb);
 	skb_set_inner_ipproto(skb, IPPROTO_SCTP);
+	local_bh_disable();
 	udp_tunnel_xmit_skb(dst_rtable(dst), sk, skb, fl4->saddr,
 			    fl4->daddr, dscp, ip4_dst_hoplimit(dst), df,
 			    sctp_sk(sk)->udp_port, t->encap_port, false, false);
+	local_bh_enable();
 	return 0;
 }
 
Signature · 1 line
2.43.0