ASoC: codecs: Use guard() for mutex & spin locks
Subsystems (8)
cover ASoC: codecs: Use guard() for mutex & spin locks
From: bui duc phuc <[email protected]>
Hi all,
This series converts mutex and spinlock handling in ASoC codec drivers to use the guard() and scoped_guard() helpers.
This series is split out from a larger 78-patch series to improve reviewability and allow for incremental review:
https://lore.kernel.org/all/[email protected]/
The changes are purely refactoring and have no functional impact.
Compile-tested only.
Best regards,
Phuc
bui duc phuc (24):
ASoC: codecs: ab8500: Use guard() for mutex locks
ASoC: codecs: ak4613: Use guard() for mutex locks
ASoC: codecs: arizona-jack: Use guard() cleanup helpers
ASoC: codecs: arizona: Use guard() for mutex locks
ASoC: codecs: aw87390: Use guard() for mutex locks
ASoC: codecs: aw88081: Use guard() for mutex locks
ASoC: codecs: aw88166: Use guard() for mutex locks
ASoC: codecs: aw88261: Use guard() for mutex locks
ASoC: codecs: aw88395: Use guard() for mutex locks
ASoC: codecs: aw88399: Use guard() for mutex locks
ASoC: codecs: cros_ec_codec: Use guard() for mutex locks
ASoC: codecs: cs-amp-lib: Use guard() for mutex locks
ASoC: codecs: cs35l56: Use guard() and PM runtime scope helpers
ASoC: codecs: cs42l42: Use guard() cleanup helpers
ASoC: codecs: cs42l43: Use guard() and PM runtime scope helpers
ASoC: codecs: cs42l84: Use guard() for mutex locks
ASoC: codecs: cs43130: Use guard() for mutex locks
ASoC: codecs: cs47l15: Use guard() for mutex locks
ASoC: codecs: cs47l35: Use guard() for mutex locks
ASoC: codecs: cs47l85: Use guard() for mutex locks
ASoC: codecs: cs47l90: Use guard() for mutex locks
ASoC: codecs: cs47l92: Use guard() for mutex locks
ASoC: codecs: cs48l32: Use guard() for mutex locks
ASoC: codecs: cs2072x: Use guard() for mutex locks
sound/soc/codecs/ab8500-codec.c | 12 ++- sound/soc/codecs/ak4613.c | 83 +++++++++-------- sound/soc/codecs/arizona-jack.c | 39 ++++---- sound/soc/codecs/arizona.c | 26 +++--- sound/soc/codecs/aw87390.c | 10 +-- sound/soc/codecs/aw88081.c | 18 ++-- sound/soc/codecs/aw88166.c | 24 +++-- sound/soc/codecs/aw88261.c | 21 ++--- sound/soc/codecs/aw88395/aw88395.c | 24 +++-- sound/soc/codecs/aw88395/aw88395_device.c | 40 +++------ sound/soc/codecs/aw88399.c | 15 ++-- sound/soc/codecs/cros_ec_codec.c | 18 ++-- sound/soc/codecs/cs-amp-lib.c | 11 ++- sound/soc/codecs/cs35l56-shared.c | 19 ++-- sound/soc/codecs/cs42l42.c | 54 +++++------ sound/soc/codecs/cs42l43-jack.c | 104 +++++++++------------- sound/soc/codecs/cs42l43.c | 16 ++-- sound/soc/codecs/cs42l84.c | 10 +-- sound/soc/codecs/cs43130.c | 72 +++++++-------- sound/soc/codecs/cs47l15.c | 11 ++- sound/soc/codecs/cs47l35.c | 11 ++- sound/soc/codecs/cs47l85.c | 11 ++- sound/soc/codecs/cs47l90.c | 11 ++- sound/soc/codecs/cs47l92.c | 11 ++- sound/soc/codecs/cs48l32.c | 29 +++--- sound/soc/codecs/cx2072x.c | 5 +- 26 files changed, 305 insertions(+), 400 deletions(-)
Signature · 1 line
2.43.0
PATCH 1/24 ASoC: codecs: ab8500: Use guard() for mutex locks
From: bui duc phuc <[email protected]>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
--- sound/soc/codecs/ab8500-codec.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-)
sound/soc/codecs/ab8500-codec.c +5 -7
@@ -14,6 +14,7 @@* for ST-Ericsson. */ +#include <linux/cleanup.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/device.h>
@@ -989,9 +990,8 @@ static int sid_status_control_get(struct snd_kcontrol *kcontrol,struct snd_soc_component *component =snd_kcontrol_chip (kcontrol);struct ab8500_codec_drvdata *drvdata =dev_get_drvdata (component->dev); -mutex_lock (&drvdata->ctrl_lock); +guard (mutex)(&drvdata->ctrl_lock); ucontrol->value.enumerated.item[0 ] = drvdata->sid_status; -mutex_unlock (&drvdata->ctrl_lock);return 0 ; }
@@ -1014,7 +1014,7 @@ static int sid_status_control_put(struct snd_kcontrol *kcontrol,return -EIO ; } -mutex_lock (&drvdata->ctrl_lock); +guard (mutex)(&drvdata->ctrl_lock); sidconf =snd_soc_component_read (component,AB8500_SIDFIRCONF );if (((sidconf &BIT (AB8500_SIDFIRCONF_FIRSIDBUSY )) !=0 )) {
@@ -1025,7 +1025,8 @@ static int sid_status_control_put(struct snd_kcontrol *kcontrol, }else { status = -EBUSY ; } - goto out; +dev_dbg (component->dev,"%s: Exit\n" , __func__); +return status; }snd_soc_component_write (component,AB8500_SIDFIRADR ,0 );
@@ -1043,9 +1044,6 @@ static int sid_status_control_put(struct snd_kcontrol *kcontrol, drvdata->sid_status =SID_FIR_CONFIGURED ; -out: -mutex_unlock (&drvdata->ctrl_lock); -dev_dbg (component->dev,"%s: Exit\n" , __func__);return status;
Signature · 1 line
2.43.0
PATCH 2/24 ASoC: codecs: ak4613: Use guard() for mutex locks
In reply to [email protected]From: bui duc phuc <[email protected]>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
--- sound/soc/codecs/ak4613.c | 83 +++++++++++++++++++-------------------- 1 file changed, 40 insertions(+), 43 deletions(-)
sound/soc/codecs/ak4613.c +40 -43
@@ -95,6 +95,7 @@* see * AK4613_ENABLE_TDM_TEST */ +#include <linux/cleanup.h> #include <linux/clk.h> #include <linux/delay.h> #include <linux/i2c.h>
@@ -384,7 +385,7 @@ static void ak4613_dai_shutdown(struct snd_pcm_substream *substream,struct ak4613_priv *priv =snd_soc_component_get_drvdata (component);struct device *dev = component->dev; -mutex_lock (&priv->lock); +guard (mutex)(&priv->lock); priv->cnt--;if (priv->cnt <0 ) {dev_err (dev,"unexpected counter error\n" );
@@ -392,7 +393,6 @@ static void ak4613_dai_shutdown(struct snd_pcm_substream *substream, }if (!priv->cnt) priv->ctrl1 =0 ; -mutex_unlock (&priv->lock); } static void ak4613_hw_constraints(struct ak4613_priv *priv,
@@ -507,10 +507,9 @@ static int ak4613_dai_startup(struct snd_pcm_substream *substream,struct snd_soc_component *component = dai->component;struct ak4613_priv *priv =snd_soc_component_get_drvdata (component); -mutex_lock (&priv->lock); +guard (mutex)(&priv->lock);ak4613_hw_constraints (priv, substream); priv->cnt++; -mutex_unlock (&priv->lock);return 0 ; }
@@ -599,45 +598,47 @@ static int ak4613_dai_hw_params(struct snd_pcm_substream *substream,*/ ret = -EINVAL ; -mutex_lock (&priv->lock); -if (priv->cnt >1 ) { -/* -* If it was already working, use current priv->ctrl1 -*/ - ret =0 ; - }else { -/* -* It is not yet working, -*/ -unsigned int channel =params_channels (params); -u8 tdm; - -/* STEREO or TDM */ -if (channel ==2 ) - tdm =AK4613_CONFIG_MODE_STEREO ; -else - tdm =AK4613_CONFIG_GET (priv,MODE ); - -for (i =ARRAY_SIZE (ak4613_iface) -1 ; i >=0 ; i--) { -const struct ak4613_interface *iface = ak4613_iface + i; - -if ((iface->fmt == fmt) && (iface->width == width)) { -/* -* Ctrl1 -* | D7 | D6 | D5 | D4 | D3 | D2 | D1 | D0 | -* |TDM1|TDM0|DIF2|DIF1|DIF0|ATS1|ATS0|SMUTE| -* < tdm > < iface->dif > -*/ - priv->ctrl1 = (tdm <<6 ) | (iface->dif <<3 ); - ret =0 ; -break ; + scoped_guard(mutex, &priv->lock) { +if (priv->cnt >1 ) { +/* +* If it was already working, use current priv->ctrl1 +*/ + ret =0 ; + }else { +/* +* It is not yet working, +*/ +unsigned int channel =params_channels (params); +u8 tdm; + +/* STEREO or TDM */ +if (channel ==2 ) + tdm =AK4613_CONFIG_MODE_STEREO ; +else + tdm =AK4613_CONFIG_GET (priv,MODE ); + +for (i =ARRAY_SIZE (ak4613_iface) -1 ; i >=0 ; i--) { +const struct ak4613_interface *iface = ak4613_iface + i; + +if (iface->fmt == fmt && iface->width == width) { +/* +* Ctrl1 +* | D7 | D6 | D5 | D4 | D3 | D2 | D1 | D0 | +* |TDM1|TDM0|DIF2|DIF1|DIF0|ATS1|ATS0|SMUTE| +* < tdm > < iface->dif > +*/ + priv->ctrl1 = (tdm <<6 ) | (iface->dif <<3 ); + ret =0 ; +break ; + } } } } -mutex_unlock (&priv->lock); -if (ret <0 ) - goto hw_params_end; +if (ret <0 ) { +dev_warn (dev,"unsupported data width/format combination\n" ); +return ret; + }snd_soc_component_update_bits (component,CTRL1 ,FMT_MASK , priv->ctrl1);snd_soc_component_update_bits (component,CTRL2 ,DFS_MASK , ctrl2);
@@ -645,10 +646,6 @@ static int ak4613_dai_hw_params(struct snd_pcm_substream *substream,snd_soc_component_update_bits (component,ICTRL ,ICTRL_MASK , priv->ic);snd_soc_component_update_bits (component,OCTRL ,OCTRL_MASK , priv->oc); -hw_params_end: -if (ret <0 ) -dev_warn (dev,"unsupported data width/format combination\n" ); -return ret; }
Signature · 1 line
2.43.0
PATCH 3/24 ASoC: codecs: arizona-jack: Use guard() cleanup helpers
In reply to [email protected]From: bui duc phuc <[email protected]>
Clean up the code using guard() helpers for mutex locking and PM runtime management.
No functional change intended.
--- sound/soc/codecs/arizona-jack.c | 39 +++++++++++++++------------------ 1 file changed, 18 insertions(+), 21 deletions(-)
sound/soc/codecs/arizona-jack.c +18 -21
@@ -5,6 +5,7 @@* Copyright (C) 2012-2014 Wolfson Microelectronics plc */ +#include <linux/cleanup.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/slab.h>
@@ -707,15 +708,13 @@ static void arizona_micd_timeout_work(struct work_struct *work) struct arizona_priv, micd_timeout_work.work); -mutex_lock (&info->lock); +guard (mutex)(&info->lock);dev_dbg (info->arizona->dev,"MICD timed out, reporting HP\n" ); info->detecting = false;arizona_identify_headphone (info); - -mutex_unlock (&info->lock); }static int arizona_micd_adc_read (struct arizona_priv *info)
@@ -921,12 +920,11 @@ static void arizona_micd_detect(struct work_struct *work)cancel_delayed_work_sync (&info->micd_timeout_work); -mutex_lock (&info->lock); +guard (mutex)(&info->lock);/* If the cable was removed while measuring ignore the result */ if (!(info->jack->status &SND_JACK_MECHANICAL )) {dev_dbg (arizona->dev,"Ignoring MICDET for removed cable\n" ); -mutex_unlock (&info->lock);return ; }
@@ -936,7 +934,6 @@ static void arizona_micd_detect(struct work_struct *work)arizona_button_reading (info);pm_runtime_mark_last_busy (arizona->dev); -mutex_unlock (&info->lock); }static irqreturn_t arizona_micdet (int irq,void *data)
@@ -948,10 +945,10 @@ static irqreturn_t arizona_micdet(int irq, void *data)cancel_delayed_work_sync (&info->micd_detect_work);cancel_delayed_work_sync (&info->micd_timeout_work); -mutex_lock (&info->lock); -if (!info->detecting) - debounce =0 ; -mutex_unlock (&info->lock); + scoped_guard(mutex, &info->lock) { +if (!info->detecting) + debounce =0 ; + }if (debounce) queue_delayed_work(system_power_efficient_wq,
@@ -969,9 +966,8 @@ static void arizona_hpdet_work(struct work_struct *work) struct arizona_priv, hpdet_work.work); -mutex_lock (&info->lock); +guard (mutex)(&info->lock);arizona_start_hpdet_acc_id (info); -mutex_unlock (&info->lock); }static int arizona_hpdet_wait (struct arizona_priv *info)
@@ -1018,9 +1014,9 @@ static irqreturn_t arizona_jackdet(int irq, void *data) cancelled_hp =cancel_delayed_work_sync (&info->hpdet_work); cancelled_mic =cancel_delayed_work_sync (&info->micd_timeout_work); -pm_runtime_get_sync (arizona->dev); +guard (pm_runtime_active_auto)(arizona->dev); -mutex_lock (&info->lock); +guard (mutex)(&info->lock);if (info->micd_clamp) { mask =ARIZONA_MICD_CLAMP_STS ;
@@ -1036,8 +1032,6 @@ static irqreturn_t arizona_jackdet(int irq, void *data) ret =regmap_read (arizona->regmap,ARIZONA_AOD_IRQ_RAW_STATUS , &val);if (ret) {dev_err (arizona->dev,"Failed to read jackdet status: %d\n" , ret); -mutex_unlock (&info->lock); -pm_runtime_put_autosuspend (arizona->dev);return IRQ_NONE ; }
@@ -1057,7 +1051,14 @@ static irqreturn_t arizona_jackdet(int irq, void *data) msecs_to_jiffies(micd_timeout)); } - goto out; +/* Clear trig_sts to make sure DCVDD is not forced up */ +regmap_write (arizona->regmap,ARIZONA_AOD_WKUP_AND_TRIG , +ARIZONA_MICD_CLAMP_FALL_TRIG_STS | +ARIZONA_MICD_CLAMP_RISE_TRIG_STS | +ARIZONA_JD1_FALL_TRIG_STS | +ARIZONA_JD1_RISE_TRIG_STS ); + +return IRQ_HANDLED ; } info->last_jackdet = val;
@@ -1111,7 +1112,6 @@ static irqreturn_t arizona_jackdet(int irq, void *data) ARIZONA_MICD_CLAMP_DB | ARIZONA_JD1_DB); } -out:/* Clear trig_sts to make sure DCVDD is not forced up */ regmap_write(arizona->regmap, ARIZONA_AOD_WKUP_AND_TRIG, ARIZONA_MICD_CLAMP_FALL_TRIG_STS |
@@ -1119,9 +1119,6 @@ static irqreturn_t arizona_jackdet(int irq, void *data)ARIZONA_JD1_FALL_TRIG_STS | ARIZONA_JD1_RISE_TRIG_STS); -mutex_unlock (&info->lock); - -pm_runtime_put_autosuspend (arizona->dev);return IRQ_HANDLED ; }
Signature · 1 line
2.43.0
Charles Keepax
maintainerRe: [PATCH 03/24] ASoC: codecs: arizona-jack: Use guard() cleanup helpers
Quoted 11 lines · On Fri, Jun 26, 2026 at 01:13:08PM +0700, [email protected] wrote:
From: bui duc phuc <[email protected]>
Clean up the code using
guard()helpers for mutex locking and PM runtime management.
No functional change intended.Signed-off-by bui duc phuc <[email protected]>---
sound/soc/codecs/arizona-jack.c +0
-0@@ -1057,7 +1051,14 @@ static irqreturn_t arizona_jackdet(int irq, void *data) msecs_to_jiffies(micd_timeout)); }
sound/soc/codecs/arizona-jack.c static irqreturn_t arizona_jackdet(int irq, void *data) · line 1061
Quoted 10 lines
sound/soc/codecs/arizona-jack.c +8
-1- goto out; +/* Clear trig_sts to make sure DCVDD is not forced up */ +regmap_write (arizona->regmap,ARIZONA_AOD_WKUP_AND_TRIG , +ARIZONA_MICD_CLAMP_FALL_TRIG_STS | +ARIZONA_MICD_CLAMP_RISE_TRIG_STS | +ARIZONA_JD1_FALL_TRIG_STS | +ARIZONA_JD1_RISE_TRIG_STS ); + +return IRQ_HANDLED ;
Like cs42l43 I am really not sure about this duplicated code block.
Thanks,
Charles
PATCH 4/24 ASoC: codecs: arizona: Use guard() for mutex locks
In reply to [email protected]From: bui duc phuc <[email protected]>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
--- sound/soc/codecs/arizona.c | 26 +++++++++++--------------- 1 file changed, 11 insertions(+), 15 deletions(-)
sound/soc/codecs/arizona.c +11 -15
@@ -7,6 +7,7 @@* Author: Mark Brown <[email protected]> */ +#include <linux/cleanup.h> #include <linux/delay.h> #include <linux/gcd.h> #include <linux/module.h>
@@ -1158,17 +1159,16 @@ int arizona_dvfs_up(struct snd_soc_component *component, unsigned int flags)struct arizona_priv *priv =snd_soc_component_get_drvdata (component);int ret =0 ; -mutex_lock (&priv->dvfs_lock); +guard (mutex)(&priv->dvfs_lock);if (!priv->dvfs_cached && !priv->dvfs_reqs) { ret =arizona_dvfs_enable (component);if (ret) - goto err; +return ret; } priv->dvfs_reqs |= flags; -err: -mutex_unlock (&priv->dvfs_lock); +return ret; }EXPORT_SYMBOL_GPL (arizona_dvfs_up);
@@ -1179,7 +1179,7 @@ int arizona_dvfs_down(struct snd_soc_component *component, unsigned int flags)unsigned int old_reqs;int ret =0 ; -mutex_lock (&priv->dvfs_lock); +guard (mutex)(&priv->dvfs_lock); old_reqs = priv->dvfs_reqs; priv->dvfs_reqs &= ~flags;
@@ -1187,7 +1187,6 @@ int arizona_dvfs_down(struct snd_soc_component *component, unsigned int flags)if (!priv->dvfs_cached && old_reqs && !priv->dvfs_reqs) ret =arizona_dvfs_disable (component); -mutex_unlock (&priv->dvfs_lock);return ret; }EXPORT_SYMBOL_GPL (arizona_dvfs_down);
@@ -1199,7 +1198,7 @@ int arizona_dvfs_sysclk_ev(struct snd_soc_dapm_widget *w,struct arizona_priv *priv =snd_soc_component_get_drvdata (component);int ret =0 ; -mutex_lock (&priv->dvfs_lock); +guard (mutex)(&priv->dvfs_lock);switch (event) {case SND_SOC_DAPM_POST_PMU :
@@ -1222,7 +1221,6 @@ int arizona_dvfs_sysclk_ev(struct snd_soc_dapm_widget *w,break ; } -mutex_unlock (&priv->dvfs_lock);return ret; }EXPORT_SYMBOL_GPL (arizona_dvfs_sysclk_ev);
@@ -1657,13 +1655,11 @@ static void arizona_wm5102_set_dac_comp(struct snd_soc_component *component, { 0x80, 0x0 }, }; -mutex_lock (&arizona->dac_comp_lock); - - dac_comp[1 ].def = arizona->dac_comp_coeff; -if (rate >=176400 ) - dac_comp[2 ].def = arizona->dac_comp_enabled; - -mutex_unlock (&arizona->dac_comp_lock); + scoped_guard(mutex, &arizona->dac_comp_lock) { + dac_comp[1 ].def = arizona->dac_comp_coeff; +if (rate >=176400 ) + dac_comp[2 ].def = arizona->dac_comp_enabled; + } regmap_multi_reg_write(arizona->regmap, dac_comp,
Signature · 1 line
2.43.0
Re: [PATCH 04/24] ASoC: codecs: arizona: Use guard() for mutex locks
Quoted 7 lines · On Fri, Jun 26, 2026 at 01:13:09PM +0700, [email protected] wrote:
From: bui duc phuc <[email protected]>
Clean up the code using
guard()for mutex locks.
Merely code refactoring, and no behavior change.Signed-off-by bui duc phuc <[email protected]>---
Thanks,
Charles
PATCH 5/24 ASoC: codecs: aw87390: Use guard() for mutex locks
In reply to [email protected]From: bui duc phuc <[email protected]>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
--- sound/soc/codecs/aw87390.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-)
sound/soc/codecs/aw87390.c +3 -7
@@ -7,6 +7,7 @@// Author: Weidong Wang <[email protected]> // +#include <linux/cleanup.h> #include <linux/i2c.h> #include <linux/firmware.h> #include <linux/regmap.h>
@@ -225,11 +226,10 @@ static int aw87390_profile_set(struct snd_kcontrol *kcontrol,struct aw87390 *aw87390 =snd_soc_component_get_drvdata (codec);int ret; -mutex_lock (&aw87390->lock); +guard (mutex)(&aw87390->lock); ret =aw87390_dev_set_profile_index (aw87390->aw_pa, ucontrol->value.integer.value[0 ]);if (ret) {dev_dbg (codec->dev,"profile index does not change\n" ); -mutex_unlock (&aw87390->lock);return 0 ; }
@@ -238,8 +238,6 @@ static int aw87390_profile_set(struct snd_kcontrol *kcontrol,aw87390_power_on (aw87390->aw_pa); } -mutex_unlock (&aw87390->lock); -return 1 ; }
@@ -280,14 +278,12 @@ static int aw87390_request_firmware_file(struct aw87390 *aw87390)return ret; } -mutex_lock (&aw87390->lock); +guard (mutex)(&aw87390->lock); ret =aw88395_dev_cfg_load (aw87390->aw_pa, aw87390->aw_cfg);if (ret)dev_err (aw87390->aw_pa->dev,"aw_dev acf parse failed\n" ); -mutex_unlock (&aw87390->lock); -return ret; }
Signature · 1 line
2.43.0
PATCH 6/24 ASoC: codecs: aw88081: Use guard() for mutex locks
In reply to [email protected]From: bui duc phuc <[email protected]>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
--- sound/soc/codecs/aw88081.c | 18 ++++++------------ 1 file changed, 6 insertions(+), 12 deletions(-)
sound/soc/codecs/aw88081.c +6 -12
@@ -7,6 +7,7 @@// Author: Weidong Wang <[email protected]> // +#include <linux/cleanup.h> #include <linux/firmware.h> #include <linux/i2c.h> #include <linux/regmap.h>
@@ -763,9 +764,8 @@ static void aw88081_startup_work(struct work_struct *work)struct aw88081 *aw88081 = container_of(work, struct aw88081, start_work.work); -mutex_lock (&aw88081->lock); +guard (mutex)(&aw88081->lock);aw88081_start_pa (aw88081); -mutex_unlock (&aw88081->lock); }static void aw88081_start (struct aw88081 *aw88081,bool sync_start)
@@ -942,11 +942,10 @@ static int aw88081_profile_set(struct snd_kcontrol *kcontrol,int ret;/* pa stop or stopping just set profile */ -mutex_lock (&aw88081->lock); +guard (mutex)(&aw88081->lock); ret =aw88081_dev_set_profile_index (aw88081->aw_pa, ucontrol->value.integer.value[0 ]);if (ret) {dev_dbg (codec->dev,"profile index does not change" ); -mutex_unlock (&aw88081->lock);return 0 ; }
@@ -955,8 +954,6 @@ static int aw88081_profile_set(struct snd_kcontrol *kcontrol,aw88081_start (aw88081,AW88081_SYNC_START ); } -mutex_unlock (&aw88081->lock); -return 1 ; }
@@ -1165,11 +1162,9 @@ static int aw88081_request_firmware_file(struct aw88081 *aw88081)if (ret)return ret; -mutex_lock (&aw88081->lock); - ret =aw88081_dev_init (aw88081, aw88081->aw_cfg); -mutex_unlock (&aw88081->lock); +guard (mutex)(&aw88081->lock); -return ret; +return aw88081_dev_init (aw88081, aw88081->aw_cfg); } static int aw88081_playback_event(struct snd_soc_dapm_widget *w,
@@ -1178,7 +1173,7 @@ static int aw88081_playback_event(struct snd_soc_dapm_widget *w,struct snd_soc_component *component =snd_soc_dapm_to_component (w->dapm);struct aw88081 *aw88081 =snd_soc_component_get_drvdata (component); -mutex_lock (&aw88081->lock); +guard (mutex)(&aw88081->lock);switch (event) {case SND_SOC_DAPM_PRE_PMU :aw88081_start (aw88081,AW88081_ASYNC_START );
@@ -1189,7 +1184,6 @@ static int aw88081_playback_event(struct snd_soc_dapm_widget *w,default :break ; } -mutex_unlock (&aw88081->lock);return 0 ; }
Signature · 1 line
2.43.0
PATCH 7/24 ASoC: codecs: aw88166: Use guard() for mutex locks
In reply to [email protected]From: bui duc phuc <[email protected]>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
--- sound/soc/codecs/aw88166.c | 24 ++++++++++-------------- 1 file changed, 10 insertions(+), 14 deletions(-)
sound/soc/codecs/aw88166.c +10 -14
@@ -7,6 +7,7 @@// Author: Weidong Wang <[email protected]> // +#include <linux/cleanup.h> #include <linux/crc32.h> #include <linux/firmware.h> #include <linux/gpio/consumer.h>
@@ -1173,9 +1174,8 @@ static void aw88166_startup_work(struct work_struct *work)struct aw88166 *aw88166 = container_of(work, struct aw88166, start_work.work); -mutex_lock (&aw88166->lock); +guard (mutex)(&aw88166->lock);aw88166_start_pa (aw88166); -mutex_unlock (&aw88166->lock); }static void aw88166_start (struct aw88166 *aw88166,bool sync_start)
@@ -1413,11 +1413,10 @@ static int aw88166_profile_set(struct snd_kcontrol *kcontrol,struct aw88166 *aw88166 =snd_soc_component_get_drvdata (codec);int ret; -mutex_lock (&aw88166->lock); +guard (mutex)(&aw88166->lock); ret =aw88166_dev_set_profile_index (aw88166->aw_pa, ucontrol->value.integer.value[0 ]);if (ret) {dev_dbg (codec->dev,"profile index does not change" ); -mutex_unlock (&aw88166->lock);return 0 ; }
@@ -1426,8 +1425,6 @@ static int aw88166_profile_set(struct snd_kcontrol *kcontrol,aw88166_start (aw88166,AW88166_SYNC_START ); } -mutex_unlock (&aw88166->lock); -return 1 ; }
@@ -1607,12 +1604,12 @@ static int aw88166_request_firmware_file(struct aw88166 *aw88166)return ret; } -mutex_lock (&aw88166->lock); -/* aw device init */ - ret =aw88166_dev_init (aw88166, aw88166->aw_cfg); -if (ret) -dev_err (aw88166->aw_pa->dev,"dev init failed\n" ); -mutex_unlock (&aw88166->lock); + scoped_guard(mutex, &aw88166->lock) { +/* aw device init */ + ret =aw88166_dev_init (aw88166, aw88166->aw_cfg); +if (ret) +dev_err (aw88166->aw_pa->dev,"dev init failed\n" ); + }return ret; }
@@ -1639,7 +1636,7 @@ static int aw88166_playback_event(struct snd_soc_dapm_widget *w,struct snd_soc_component *component =snd_soc_dapm_to_component (w->dapm);struct aw88166 *aw88166 =snd_soc_component_get_drvdata (component); -mutex_lock (&aw88166->lock); +guard (mutex)(&aw88166->lock);switch (event) {case SND_SOC_DAPM_PRE_PMU :aw88166_start (aw88166,AW88166_ASYNC_START );
@@ -1650,7 +1647,6 @@ static int aw88166_playback_event(struct snd_soc_dapm_widget *w,default :break ; } -mutex_unlock (&aw88166->lock);return 0 ; }
Signature · 1 line
2.43.0
PATCH 8/24 ASoC: codecs: aw88261: Use guard() for mutex locks
In reply to [email protected]From: bui duc phuc <[email protected]>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
--- sound/soc/codecs/aw88261.c | 21 +++++++++------------ 1 file changed, 9 insertions(+), 12 deletions(-)
sound/soc/codecs/aw88261.c +9 -12
@@ -8,6 +8,7 @@// Author: Weidong Wang <[email protected]> // +#include <linux/cleanup.h> #include <linux/i2c.h> #include <linux/firmware.h> #include <linux/bitops.h>
@@ -960,11 +961,10 @@ static int aw88261_profile_set(struct snd_kcontrol *kcontrol,int ret;/* pa stop or stopping just set profile */ -mutex_lock (&aw88261->lock); +guard (mutex)(&aw88261->lock); ret =aw88261_dev_set_profile_index (aw88261->aw_pa, ucontrol->value.integer.value[0 ]);if (ret) {dev_dbg (codec->dev,"profile index does not change" ); -mutex_unlock (&aw88261->lock);return 0 ; }
@@ -973,8 +973,6 @@ static int aw88261_profile_set(struct snd_kcontrol *kcontrol,aw88261_start (aw88261); } -mutex_unlock (&aw88261->lock); -return 1 ; }
@@ -1038,7 +1036,7 @@ static int aw88261_playback_event(struct snd_soc_dapm_widget *w,struct snd_soc_component *component =snd_soc_dapm_to_component (w->dapm);struct aw88261 *aw88261 =snd_soc_component_get_drvdata (component); -mutex_lock (&aw88261->lock); +guard (mutex)(&aw88261->lock);switch (event) {case SND_SOC_DAPM_PRE_PMU :aw88261_start (aw88261);
@@ -1049,7 +1047,6 @@ static int aw88261_playback_event(struct snd_soc_dapm_widget *w,default :break ; } -mutex_unlock (&aw88261->lock);return 0 ; }
@@ -1188,12 +1185,12 @@ static int aw88261_request_firmware_file(struct aw88261 *aw88261)return ret; } -mutex_lock (&aw88261->lock); -/* aw device init */ - ret =aw88261_dev_init (aw88261, aw88261->aw_cfg); -if (ret) -dev_err (aw88261->aw_pa->dev,"dev init failed" ); -mutex_unlock (&aw88261->lock); + scoped_guard(mutex, &aw88261->lock) { +/* aw device init */ + ret =aw88261_dev_init (aw88261, aw88261->aw_cfg); +if (ret) +dev_err (aw88261->aw_pa->dev,"dev init failed" ); + }return ret; }
Signature · 1 line
2.43.0
PATCH 9/24 ASoC: codecs: aw88395: Use guard() for mutex locks
In reply to [email protected]From: bui duc phuc <[email protected]>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
--- sound/soc/codecs/aw88395/aw88395.c | 24 ++++++-------- sound/soc/codecs/aw88395/aw88395_device.c | 40 ++++++++--------------- 2 files changed, 24 insertions(+), 40 deletions(-)
sound/soc/codecs/aw88395/aw88395.c +10 -14
@@ -8,6 +8,7 @@// Author: Weidong Wang <[email protected]> // +#include <linux/cleanup.h> #include <linux/gpio/consumer.h> #include <linux/i2c.h> #include <linux/firmware.h>
@@ -51,9 +52,8 @@ static void aw88395_startup_work(struct work_struct *work)struct aw88395 *aw88395 = container_of(work, struct aw88395, start_work.work); -mutex_lock (&aw88395->lock); +guard (mutex)(&aw88395->lock);aw88395_start_pa (aw88395); -mutex_unlock (&aw88395->lock); }static void aw88395_start (struct aw88395 *aw88395,bool sync_start)
@@ -224,11 +224,10 @@ static int aw88395_profile_set(struct snd_kcontrol *kcontrol,int ret;/* pa stop or stopping just set profile */ -mutex_lock (&aw88395->lock); +guard (mutex)(&aw88395->lock); ret =aw88395_dev_set_profile_index (aw88395->aw_pa, ucontrol->value.integer.value[0 ]);if (ret <0 ) {dev_dbg (codec->dev,"profile index does not change" ); -mutex_unlock (&aw88395->lock);return 0 ; }
@@ -237,8 +236,6 @@ static int aw88395_profile_set(struct snd_kcontrol *kcontrol,aw88395_start (aw88395,AW88395_SYNC_START ); } -mutex_unlock (&aw88395->lock); -return 1 ; }
@@ -366,7 +363,7 @@ static int aw88395_playback_event(struct snd_soc_dapm_widget *w,struct snd_soc_component *component =snd_soc_dapm_to_component (w->dapm);struct aw88395 *aw88395 =snd_soc_component_get_drvdata (component); -mutex_lock (&aw88395->lock); +guard (mutex)(&aw88395->lock);switch (event) {case SND_SOC_DAPM_PRE_PMU :aw88395_start (aw88395,AW88395_ASYNC_START );
@@ -377,7 +374,6 @@ static int aw88395_playback_event(struct snd_soc_dapm_widget *w,default :break ; } -mutex_unlock (&aw88395->lock);return 0 ; }
@@ -495,12 +491,12 @@ static int aw88395_request_firmware_file(struct aw88395 *aw88395)dev_dbg (aw88395->aw_pa->dev,"%s : bin load success\n" , __func__); -mutex_lock (&aw88395->lock); -/* aw device init */ - ret =aw88395_dev_init (aw88395->aw_pa, aw88395->aw_cfg); -if (ret <0 ) -dev_err (aw88395->aw_pa->dev,"dev init failed" ); -mutex_unlock (&aw88395->lock); + scoped_guard(mutex, &aw88395->lock) { +/* aw device init */ + ret =aw88395_dev_init (aw88395->aw_pa, aw88395->aw_cfg); +if (ret <0 ) +dev_err (aw88395->aw_pa->dev,"dev init failed" ); + }return ret; }
sound/soc/codecs/aw88395/aw88395_device.c +14 -26
@@ -8,6 +8,7 @@// Author: Ben Yi <[email protected]> // +#include <linux/cleanup.h> #include <linux/crc32.h> #include <linux/i2c.h> #include <linux/minmax.h>
@@ -70,7 +71,7 @@ int aw_dev_dsp_write(struct aw_device *aw_dev,u32 reg_value;int ret; -mutex_lock (&aw_dev->dsp_lock); +guard (mutex)(&aw_dev->dsp_lock);switch (data_type) {case AW_DSP_16_DATA : ret =aw_dev_dsp_write_16bit (aw_dev, dsp_addr, dsp_data);
@@ -93,7 +94,6 @@ int aw_dev_dsp_write(struct aw_device *aw_dev,/* clear dsp chip select state*/ if (regmap_read (aw_dev->regmap,AW88395_ID_REG , ®_value))dev_err (aw_dev->dev,"%s fail to clear chip state. Err=%d\n" , __func__, ret); -mutex_unlock (&aw_dev->dsp_lock);return ret; }
@@ -156,7 +156,7 @@ int aw_dev_dsp_read(struct aw_device *aw_dev,u32 reg_value;int ret; -mutex_lock (&aw_dev->dsp_lock); +guard (mutex)(&aw_dev->dsp_lock);switch (data_type) {case AW_DSP_16_DATA : ret =aw_dev_dsp_read_16bit (aw_dev, dsp_addr, dsp_data);
@@ -179,7 +179,6 @@ int aw_dev_dsp_read(struct aw_device *aw_dev,/* clear dsp chip select state*/ if (regmap_read (aw_dev->regmap,AW88395_ID_REG , ®_value))dev_err (aw_dev->dev,"%s fail to clear chip state. Err=%d\n" , __func__, ret); -mutex_unlock (&aw_dev->dsp_lock);return ret; }
@@ -1110,42 +1109,36 @@ static int aw_dev_dsp_update_container(struct aw_device *aw_dev,#ifdef AW88395_DSP_I2C_WRITES u32 tmp_len; -mutex_lock (&aw_dev->dsp_lock); +guard (mutex)(&aw_dev->dsp_lock); ret =regmap_write (aw_dev->regmap,AW88395_DSPMADD_REG , base);if (ret) - goto error_operation; +return ret;for (i =0 ; i < len; i +=AW88395_MAX_RAM_WRITE_BYTE_SIZE ) { tmp_len =min (len - i,AW88395_MAX_RAM_WRITE_BYTE_SIZE ); ret =regmap_raw_write (aw_dev->regmap,AW88395_DSPMDAT_REG , &data[i], tmp_len);if (ret) - goto error_operation; +return ret; } -mutex_unlock (&aw_dev->dsp_lock);#else __be16 reg_val; -mutex_lock (&aw_dev->dsp_lock); +guard (mutex)(&aw_dev->dsp_lock);/* i2c write */ ret =regmap_write (aw_dev->regmap,AW88395_DSPMADD_REG , base);if (ret) - goto error_operation; +return ret;for (i =0 ; i < len; i +=2 ) { reg_val =cpu_to_be16p ((u16 *)(data + i)); ret =regmap_write (aw_dev->regmap,AW88395_DSPMDAT_REG , (u16 )reg_val);if (ret) - goto error_operation; +return ret; } -mutex_unlock (&aw_dev->dsp_lock);#endif return 0 ; - -error_operation: -mutex_unlock (&aw_dev->dsp_lock); -return ret; } static int aw_dev_dsp_update_fw(struct aw_device *aw_dev,
@@ -1231,14 +1224,14 @@ static int aw_dev_check_sram(struct aw_device *aw_dev) {unsigned int reg_val; -mutex_lock (&aw_dev->dsp_lock); +guard (mutex)(&aw_dev->dsp_lock);/* check the odd bits of reg 0x40 */ regmap_write (aw_dev->regmap,AW88395_DSPMADD_REG ,AW88395_DSP_ODD_NUM_BIT_TEST );regmap_read (aw_dev->regmap,AW88395_DSPMADD_REG , ®_val);if (reg_val !=AW88395_DSP_ODD_NUM_BIT_TEST ) {dev_err (aw_dev->dev,"check reg 0x40 odd bit failed, read[0x%x] != write[0x%x]" , reg_val,AW88395_DSP_ODD_NUM_BIT_TEST ); - goto error; +return -EPERM ; }/* check the even bits of reg 0x40 */
@@ -1247,7 +1240,7 @@ static int aw_dev_check_sram(struct aw_device *aw_dev)if (reg_val !=AW88395_DSP_EVEN_NUM_BIT_TEST ) {dev_err (aw_dev->dev,"check reg 0x40 even bit failed, read[0x%x] != write[0x%x]" , reg_val,AW88395_DSP_EVEN_NUM_BIT_TEST ); - goto error; +return -EPERM ; }/* check dsp_fw_base_addr */
@@ -1256,7 +1249,7 @@ static int aw_dev_check_sram(struct aw_device *aw_dev)if (reg_val !=AW88395_DSP_EVEN_NUM_BIT_TEST ) {dev_err (aw_dev->dev,"check dsp fw addr failed, read[0x%x] != write[0x%x]" , reg_val,AW88395_DSP_EVEN_NUM_BIT_TEST ); - goto error; +return -EPERM ; }/* check dsp_cfg_base_addr */
@@ -1265,15 +1258,10 @@ static int aw_dev_check_sram(struct aw_device *aw_dev)if (reg_val !=AW88395_DSP_ODD_NUM_BIT_TEST ) {dev_err (aw_dev->dev,"check dsp cfg failed, read[0x%x] != write[0x%x]" , reg_val,AW88395_DSP_ODD_NUM_BIT_TEST ); - goto error; +return -EPERM ; } -mutex_unlock (&aw_dev->dsp_lock);return 0 ; - -error: -mutex_unlock (&aw_dev->dsp_lock); -return -EPERM ; }int aw88395_dev_fw_update (struct aw_device *aw_dev,bool up_dsp_fw_en,bool force_up_en)
Signature · 1 line
2.43.0
PATCH 10/24 ASoC: codecs: aw88399: Use guard() for mutex locks
In reply to [email protected]From: bui duc phuc <[email protected]>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
--- sound/soc/codecs/aw88399.c | 15 +++++---------- 1 file changed, 5 insertions(+), 10 deletions(-)
sound/soc/codecs/aw88399.c +5 -10
@@ -7,6 +7,7 @@// Author: Weidong Wang <[email protected]> // +#include <linux/cleanup.h> #include <linux/crc32.h> #include <linux/gpio/consumer.h> #include <linux/i2c.h>
@@ -1140,9 +1141,8 @@ static void aw88399_startup_work(struct work_struct *work)struct aw88399 *aw88399 = container_of(work, struct aw88399, start_work.work); -mutex_lock (&aw88399->lock); +guard (mutex)(&aw88399->lock);aw88399_start_pa (aw88399); -mutex_unlock (&aw88399->lock); }static void aw88399_start (struct aw88399 *aw88399,bool sync_start)
@@ -1702,11 +1702,10 @@ static int aw88399_profile_set(struct snd_kcontrol *kcontrol,struct aw88399 *aw88399 =snd_soc_component_get_drvdata (codec);int ret; -mutex_lock (&aw88399->lock); +guard (mutex)(&aw88399->lock); ret =aw88399_dev_set_profile_index (aw88399->aw_pa, ucontrol->value.integer.value[0 ]);if (ret) {dev_dbg (codec->dev,"profile index does not change" ); -mutex_unlock (&aw88399->lock);return 0 ; }
@@ -1715,8 +1714,6 @@ static int aw88399_profile_set(struct snd_kcontrol *kcontrol,aw88399_start (aw88399,AW88399_SYNC_START ); } -mutex_unlock (&aw88399->lock); -return 1 ; }
@@ -1939,12 +1936,11 @@ static int aw88399_request_firmware_file(struct aw88399 *aw88399)return ret; } -mutex_lock (&aw88399->lock); +guard (mutex)(&aw88399->lock);/* aw device init */ ret =aw88399_dev_init (aw88399, aw88399->aw_cfg);if (ret)dev_err (aw88399->aw_pa->dev,"dev init failed" ); -mutex_unlock (&aw88399->lock);return ret; }
@@ -1975,7 +1971,7 @@ static int aw88399_playback_event(struct snd_soc_dapm_widget *w,struct snd_soc_component *component =snd_soc_dapm_to_component (w->dapm);struct aw88399 *aw88399 =snd_soc_component_get_drvdata (component); -mutex_lock (&aw88399->lock); +guard (mutex)(&aw88399->lock);switch (event) {case SND_SOC_DAPM_PRE_PMU :aw88399_start (aw88399,AW88399_ASYNC_START );
@@ -1986,7 +1982,6 @@ static int aw88399_playback_event(struct snd_soc_dapm_widget *w,default :break ; } -mutex_unlock (&aw88399->lock);return 0 ; }
Signature · 1 line
2.43.0
PATCH 11/24 ASoC: codecs: cros_ec_codec: Use guard() for mutex locks
In reply to [email protected]From: bui duc phuc <[email protected]>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
--- sound/soc/codecs/cros_ec_codec.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-)
sound/soc/codecs/cros_ec_codec.c +8 -10
@@ -12,6 +12,7 @@#include <linux/acpi.h> #include <linux/delay.h> #include <linux/device.h> +#include <linux/cleanup.h> #include <linux/io.h> #include <linux/jiffies.h> #include <linux/kernel.h>
@@ -608,10 +609,10 @@ static void wov_copy_work(struct work_struct *w) container_of(w, struct cros_ec_codec_priv, wov_copy_work.work);int ret; -mutex_lock (&priv->wov_dma_lock); +guard (mutex)(&priv->wov_dma_lock);if (!priv->wov_substream) {dev_warn (priv->dev,"no pcm substream\n" ); - goto leave; +return ; }if (ec_codec_capable (priv,EC_CODEC_CAP_WOV_AUDIO_SHM ))
@@ -624,8 +625,6 @@ static void wov_copy_work(struct work_struct *w) msecs_to_jiffies(10)); else if (ret) dev_err(priv->dev, "failed to read audio data\n"); -leave: -mutex_unlock (&priv->wov_dma_lock); } static int wov_enable_get(struct snd_kcontrol *kcontrol,
@@ -895,12 +894,11 @@ static int wov_pcm_hw_params(struct snd_soc_component *component,struct cros_ec_codec_priv *priv =snd_soc_component_get_drvdata (component); -mutex_lock (&priv->wov_dma_lock); +guard (mutex)(&priv->wov_dma_lock); priv->wov_substream = substream; priv->wov_rp = priv->wov_wp =0 ; priv->wov_dma_offset =0 ; priv->wov_burst_read = true; -mutex_unlock (&priv->wov_dma_lock);return 0 ; }
@@ -911,10 +909,10 @@ static int wov_pcm_hw_free(struct snd_soc_component *component,struct cros_ec_codec_priv *priv =snd_soc_component_get_drvdata (component); -mutex_lock (&priv->wov_dma_lock); -wov_queue_dequeue (priv,wov_queue_size (priv)); - priv->wov_substream =NULL ; -mutex_unlock (&priv->wov_dma_lock); + scoped_guard(mutex, &priv->wov_dma_lock) { +wov_queue_dequeue (priv,wov_queue_size (priv)); + priv->wov_substream =NULL ; + }cancel_delayed_work_sync (&priv->wov_copy_work);
Signature · 1 line
2.43.0
PATCH 12/24 ASoC: codecs: cs-amp-lib: Use guard() for mutex locks
In reply to [email protected]From: bui duc phuc <[email protected]>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
--- sound/soc/codecs/cs-amp-lib.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-)
sound/soc/codecs/cs-amp-lib.c +7 -4
@@ -7,6 +7,7 @@#include <asm/byteorder.h> #include <kunit/static_stub.h> +#include <linux/cleanup.h> #include <linux/debugfs.h> #include <linux/dev_printk.h> #include <linux/efi.h>
@@ -83,10 +84,12 @@ static int cs_amp_write_cal_coeff(struct cs_dsp *dsp,KUNIT_STATIC_STUB_REDIRECT (cs_amp_write_cal_coeff, dsp, controls, ctl_name, val);if (IS_REACHABLE (CONFIG_FW_CS_DSP )) { -mutex_lock (&dsp->pwr_lock); - cs_ctl =cs_dsp_get_ctl (dsp, ctl_name, controls->mem_region, controls->alg_id); - ret =cs_dsp_coeff_write_ctrl (cs_ctl,0 , &beval,sizeof (beval)); -mutex_unlock (&dsp->pwr_lock); + scoped_guard(mutex, &dsp->pwr_lock) { + cs_ctl =cs_dsp_get_ctl (dsp, ctl_name, + controls->mem_region, + controls->alg_id); + ret =cs_dsp_coeff_write_ctrl (cs_ctl,0 , &beval,sizeof (beval)); + }if (ret <0 ) {dev_err (dsp->dev,"Failed to write to '%s': %d\n" , ctl_name, ret);
Signature · 1 line
2.43.0
Re: [PATCH 12/24] ASoC: codecs: cs-amp-lib: Use guard() for mutex locks
Quoted 6 lines · On 26/06/2026 7:13 am, [email protected] wrote:
From: bui duc phuc <[email protected]>
Clean up the code using
guard()for mutex locks.
Merely code refactoring, and no behavior change.Signed-off-by bui duc phuc <[email protected]>
It doesn't look cleaner.
But anyway,
Quoted 33 lines
--- sound/soc/codecs/cs-amp-lib.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-)sound/soc/codecs/cs-amp-lib.c +7
-4@@ -7,6 +7,7 @@#include <asm/byteorder.h> #include <kunit/static_stub.h> +#include <linux/cleanup.h> #include <linux/debugfs.h> #include <linux/dev_printk.h> #include <linux/efi.h> @@ -83,10 +84,12 @@ static int cs_amp_write_cal_coeff(struct cs_dsp *dsp,KUNIT_STATIC_STUB_REDIRECT (cs_amp_write_cal_coeff, dsp, controls, ctl_name, val);if (IS_REACHABLE (CONFIG_FW_CS_DSP )) { -mutex_lock (&dsp->pwr_lock); - cs_ctl =cs_dsp_get_ctl (dsp, ctl_name, controls->mem_region, controls->alg_id); - ret =cs_dsp_coeff_write_ctrl (cs_ctl,0 , &beval,sizeof (beval)); -mutex_unlock (&dsp->pwr_lock); + scoped_guard(mutex, &dsp->pwr_lock) { + cs_ctl =cs_dsp_get_ctl (dsp, ctl_name, + controls->mem_region, + controls->alg_id); + ret =cs_dsp_coeff_write_ctrl (cs_ctl,0 , &beval,sizeof (beval)); + }if (ret <0 ) {dev_err (dsp->dev,"Failed to write to '%s': %d\n" , ctl_name, ret);
Re: [PATCH 12/24] ASoC: codecs: cs-amp-lib: Use guard() for mutex locks
Quoted 5 lines
It doesn't look cleaner.
But anyway,Reviewed-by Richard Fitzgerald <[email protected]>
Thanks for the review.
Guards are particularly nice when they can eliminate goto labels and make the code easier to follow.
In this file, as you pointed out, they don't make much difference. Even so, I wanted to keep the style consistent across the driver, so I tried to convert as many suitable cases as possible.
Best regards,
Phuc
PATCH 13/24 ASoC: codecs: cs35l56: Use guard() and PM runtime scope helpers
In reply to [email protected]From: bui duc phuc <[email protected]>
Convert the interrupt handler to use guard(mutex) for automatic mutex unlocking and PM_RUNTIME_ACQUIRE_IF_ENABLED() to manage the runtime PM reference through scope-based cleanup.
This removes the explicit cleanup paths while preserving the existing behavior.
--- sound/soc/codecs/cs35l56-shared.c | 19 +++++++------------ 1 file changed, 7 insertions(+), 12 deletions(-)
sound/soc/codecs/cs35l56-shared.c +7 -12
@@ -645,18 +645,19 @@ irqreturn_t cs35l56_irq(int irq, void *data)if (!cs35l56_base->init_done)return IRQ_NONE ; -mutex_lock (&cs35l56_base->irq_lock); +guard (mutex)(&cs35l56_base->irq_lock); - rv =pm_runtime_resume_and_get (cs35l56_base->dev); +PM_RUNTIME_ACQUIRE_IF_ENABLED (cs35l56_base->dev, pm); + rv =PM_RUNTIME_ACQUIRE_ERR (&pm);if (rv <0 ) {dev_err (cs35l56_base->dev,"irq: failed to get pm_runtime: %d\n" , rv); - goto err_unlock; +return ret; }regmap_read (cs35l56_base->regmap,CS35L56_IRQ1_STATUS , &val);if ((val &CS35L56_IRQ1_STS_MASK ) ==0 ) {dev_dbg (cs35l56_base->dev,"Spurious IRQ: no pending interrupt\n" ); - goto err; +return ret; }/* Ack interrupts */
@@ -680,7 +681,7 @@ irqreturn_t cs35l56_irq(int irq, void *data)/* Check to see if unmasked bits are active */ if (!status1 && !status8 && !status20) - goto err; +return ret;if (status1 &CS35L56_AMP_SHORT_ERR_EINT1_MASK )dev_crit (cs35l56_base->dev,"Amp short error\n" );
@@ -688,14 +689,8 @@ irqreturn_t cs35l56_irq(int irq, void *data)if (status8 &CS35L56_TEMP_ERR_EINT1_MASK )dev_crit (cs35l56_base->dev,"Overtemp error\n" ); - ret =IRQ_HANDLED ; +return IRQ_HANDLED ; -err: -pm_runtime_put (cs35l56_base->dev); -err_unlock: -mutex_unlock (&cs35l56_base->irq_lock); - -return ret; }EXPORT_SYMBOL_NS_GPL (cs35l56_irq,"SND_SOC_CS35L56_SHARED" );
Signature · 1 line
2.43.0
Richard Fitzgerald
maintainerRe: [PATCH 13/24] ASoC: codecs: cs35l56: Use guard() and PM runtime scope helpers
Quoted 21 lines · On 26/06/2026 7:13 am, [email protected] wrote:
From: bui duc phuc <[email protected]>
Convert the interrupt handler to use guard(mutex) for automatic mutex unlocking and
PM_RUNTIME_ACQUIRE_IF_ENABLED()to manage the runtime PM reference through scope-based cleanup.
This removes the explicit cleanup paths while preserving the existing behavior.Signed-off-by bui duc phuc <[email protected]>--- sound/soc/codecs/cs35l56-shared.c | 19 +++++++------------ 1 file changed, 7 insertions(+), 12 deletions(-)sound/soc/codecs/cs35l56-shared.c +0
-0@@ -645,18 +645,19 @@ irqreturn_t cs35l56_irq(int irq, void *data)if (!cs35l56_base->init_done)return IRQ_NONE ;
sound/soc/codecs/cs35l56-shared.c irqreturn_t cs35l56_irq(int irq, void *data) · line 654
Quoted 10 lines
sound/soc/codecs/cs35l56-shared.c +4
-3-mutex_lock (&cs35l56_base->irq_lock); +guard (mutex)(&cs35l56_base->irq_lock); - rv =pm_runtime_resume_and_get (cs35l56_base->dev); +PM_RUNTIME_ACQUIRE_IF_ENABLED (cs35l56_base->dev, pm); + rv =PM_RUNTIME_ACQUIRE_ERR (&pm);if (rv <0 ) {dev_err (cs35l56_base->dev,"irq: failed to get pm_runtime: %d\n" , rv); - goto err_unlock; +return ret;
Should change all the error returns to directly return IRQ_NONE. It looks like a bug that it checks rv but returns ret.
The reason for ret was so it could use common exit code to pm_runtime_put() and mutex_unlock() for the error and success cases. But this isn't needed now.
The local ret variable can be deleted.
Quoted 35 lines
sound/soc/codecs/cs35l56-shared.c +3
-9}regmap_read (cs35l56_base->regmap,CS35L56_IRQ1_STATUS , &val);if ((val &CS35L56_IRQ1_STS_MASK ) ==0 ) {dev_dbg (cs35l56_base->dev,"Spurious IRQ: no pending interrupt\n" ); - goto err; +return ret; }/* Ack interrupts */ @@ -680,7 +681,7 @@ irqreturn_t cs35l56_irq(int irq, void *data)/* Check to see if unmasked bits are active */ if (!status1 && !status8 && !status20) - goto err; +return ret;if (status1 &CS35L56_AMP_SHORT_ERR_EINT1_MASK )dev_crit (cs35l56_base->dev,"Amp short error\n" );@@ -688,14 +689,8 @@ irqreturn_t cs35l56_irq(int irq, void *data)if (status8 &CS35L56_TEMP_ERR_EINT1_MASK )dev_crit (cs35l56_base->dev,"Overtemp error\n" ); - ret =IRQ_HANDLED ; +return IRQ_HANDLED ; -err: -pm_runtime_put (cs35l56_base->dev); -err_unlock: -mutex_unlock (&cs35l56_base->irq_lock); - -return ret; }EXPORT_SYMBOL_NS_GPL (cs35l56_irq,"SND_SOC_CS35L56_SHARED" );
Re: [PATCH 13/24] ASoC: codecs: cs35l56: Use guard() and PM runtime scope helpers
Hi Richard,
Thank you for your review.
Quoted 10 lines
Should change all the error returns to directly return
IRQ_NONE. It looks like a bug that it checks rv but returns ret.The reason for ret was so it could use common exit code to
pm_runtime_put()andmutex_unlock()for the error and success cases. But this isn't needed now.The local ret variable can be deleted.
I sent a v2 a few days ago.
https://lore.kernel.org/all/[email protected]/
Could you please take a look and review it as well?
If there are any remaining issues, I'll address them and send a v3.
Best regards,
Phuc
PATCH 14/24 ASoC: codecs: cs42l42: Use guard() cleanup helpers
In reply to [email protected]From: bui duc phuc <[email protected]>
Clean up the code using guard() helpers for mutex locking and PM runtime management.
No functional change intended.
--- sound/soc/codecs/cs42l42.c | 54 +++++++++++++++++--------------------- 1 file changed, 24 insertions(+), 30 deletions(-)
sound/soc/codecs/cs42l42.c +24 -30
@@ -9,6 +9,7 @@* Author: Michael White <[email protected]> */ +#include <linux/cleanup.h> #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/types.h>
@@ -565,7 +566,7 @@ static int cs42l42_set_jack(struct snd_soc_component *component, struct snd_soc_struct cs42l42_private *cs42l42 =snd_soc_component_get_drvdata (component);/* Prevent race with interrupt handler */ -mutex_lock (&cs42l42->irq_lock); +guard (mutex)(&cs42l42->irq_lock); cs42l42->jack = jk;if (jk) {
@@ -581,7 +582,6 @@ static int cs42l42_set_jack(struct snd_soc_component *component, struct snd_soc_break ; } } -mutex_unlock (&cs42l42->irq_lock);return 0 ; }
@@ -1668,13 +1668,10 @@ irqreturn_t cs42l42_irq_thread(int irq, void *data)unsigned int current_button_status;unsigned int i; -pm_runtime_get_sync (cs42l42->dev); -mutex_lock (&cs42l42->irq_lock); -if (cs42l42->suspended || !cs42l42->init_done) { -mutex_unlock (&cs42l42->irq_lock); -pm_runtime_put_autosuspend (cs42l42->dev); +guard (pm_runtime_active_auto)(cs42l42->dev); +guard (mutex)(&cs42l42->irq_lock); +if (cs42l42->suspended || !cs42l42->init_done)return IRQ_NONE ; - }/* Read sticky registers to clear interurpt */ for (i =0 ; i <ARRAY_SIZE (stickies); i++) {
@@ -1774,9 +1771,6 @@ irqreturn_t cs42l42_irq_thread(int irq, void *data) } } -mutex_unlock (&cs42l42->irq_lock); -pm_runtime_put_autosuspend (cs42l42->dev); -return IRQ_HANDLED ; }EXPORT_SYMBOL_NS_GPL (cs42l42_irq_thread,"SND_SOC_CS42L42_CORE" );
@@ -2163,22 +2157,22 @@ int cs42l42_suspend(struct device *dev)* future interrupts. This ensures a safe disable if the interrupt * is shared. */ -mutex_lock (&cs42l42->irq_lock); - cs42l42->suspended = true; + scoped_guard(mutex, &cs42l42->irq_lock) { + cs42l42->suspended = true; -/* Save register values that will be overwritten by shutdown sequence */ -for (i =0 ; i <ARRAY_SIZE (cs42l42_shutdown_seq); ++i) { -regmap_read (cs42l42->regmap, cs42l42_shutdown_seq[i].reg, ®); - save_regs[i] = (u8 )reg; - } +/* Save register values that will be overwritten by shutdown sequence */ +for (i =0 ; i <ARRAY_SIZE (cs42l42_shutdown_seq); ++i) { +regmap_read (cs42l42->regmap, cs42l42_shutdown_seq[i].reg, ®); + save_regs[i] = (u8 )reg; + } -/* Shutdown codec */ -regmap_multi_reg_write (cs42l42->regmap, - cs42l42_shutdown_seq, -ARRAY_SIZE (cs42l42_shutdown_seq)); +/* Shutdown codec */ +regmap_multi_reg_write (cs42l42->regmap, + cs42l42_shutdown_seq, +ARRAY_SIZE (cs42l42_shutdown_seq)); -/* All interrupt sources are now disabled */ -mutex_unlock (&cs42l42->irq_lock); +/* All interrupt sources are now disabled */ + }/* Wait for power-down complete */ msleep (CS42L42_PDN_DONE_TIME_MS );
@@ -2250,13 +2244,13 @@ void cs42l42_resume_restore(struct device *dev)regcache_cache_only (cs42l42->regmap, false);regcache_mark_dirty (cs42l42->regmap); -mutex_lock (&cs42l42->irq_lock); -/* Sync LATCH_TO_VP first so the VP domain registers sync correctly */ -regcache_sync_region (cs42l42->regmap,CS42L42_MIC_DET_CTL1 ,CS42L42_MIC_DET_CTL1 ); -regcache_sync (cs42l42->regmap); + scoped_guard(mutex, &cs42l42->irq_lock) { +/* Sync LATCH_TO_VP first so the VP domain registers sync correctly */ +regcache_sync_region (cs42l42->regmap,CS42L42_MIC_DET_CTL1 ,CS42L42_MIC_DET_CTL1 ); +regcache_sync (cs42l42->regmap); - cs42l42->suspended = false; -mutex_unlock (&cs42l42->irq_lock); + cs42l42->suspended = false; + }dev_dbg (dev,"System resumed\n" ); }
Signature · 1 line
2.43.0
Re: [PATCH 14/24] ASoC: codecs: cs42l42: Use guard() cleanup helpers
Quoted 8 lines · On Fri, Jun 26, 2026 at 01:13:19PM +0700, [email protected] wrote:
From: bui duc phuc <[email protected]>
Clean up the code using
guard()helpers for mutex locking and PM runtime management.
No functional change intended.Signed-off-by bui duc phuc <[email protected]>---
Thanks,
Charles
PATCH 15/24 ASoC: codecs: cs42l43: Use guard() and PM runtime scope helpers
In reply to [email protected]From: bui duc phuc <[email protected]>
Convert mutex locking to guard(mutex) and replace explicit runtime PM handling with runtime PM scope helpers.
This simplifies the control flow by removing explicit cleanup paths and unnecessary 'goto' labels.
--- sound/soc/codecs/cs42l43-jack.c | 104 ++++++++++++++------------------ sound/soc/codecs/cs42l43.c | 16 ++--- 2 files changed, 49 insertions(+), 71 deletions(-)
sound/soc/codecs/cs42l43-jack.c +44 -60
@@ -6,6 +6,7 @@// Cirrus Logic International Semiconductor Ltd. #include <linux/build_bug.h> +#include <linux/cleanup.h> #include <linux/completion.h> #include <linux/delay.h> #include <linux/errno.h>
@@ -80,31 +81,41 @@ int cs42l43_set_jack(struct snd_soc_component *component,dev_dbg (priv->dev,"Configure accessory detect\n" ); - ret =pm_runtime_resume_and_get (priv->dev); +PM_RUNTIME_ACQUIRE_IF_ENABLED_AUTOSUSPEND (priv->dev, pm); + ret =PM_RUNTIME_ACQUIRE_ERR (&pm);if (ret) {dev_err (priv->dev,"Failed to resume for jack config: %d\n" , ret);return ret; } -mutex_lock (&priv->jack_lock); +guard (mutex)(&priv->jack_lock); priv->jack_hp = jack; -if (!jack) - goto done; +if (!jack) { +regmap_update_bits (cs42l43->regmap,CS42L43_HS_BIAS_SENSE_AND_CLAMP_AUTOCONTROL , +CS42L43_JACKDET_MODE_MASK | +CS42L43_S0_AUTO_ADCMUTE_DISABLE_MASK | +CS42L43_HSBIAS_SENSE_TRIP_MASK , autocontrol); +regmap_update_bits (cs42l43->regmap,CS42L43_PDNCNTL , +CS42L43_RING_SENSE_EN_MASK , pdncntl); +dev_dbg (priv->dev,"Successfully configured accessory detect\n" ); + +return 0 ; + } ret =device_property_count_u32 (cs42l43->dev,"cirrus,buttons-ohms" );if (ret != -EINVAL ) {if (ret <0 ) {dev_err (priv->dev,"Property cirrus,buttons-ohms malformed: %d\n" , ret); - goto error; +return ret; }if (ret >CS42L43_N_BUTTONS ) { ret = -EINVAL ;dev_err (priv->dev,"Property cirrus,buttons-ohms too many entries\n" ); - goto error; +return ret; } ret = device_property_read_u32_array(cs42l43->dev, "cirrus,buttons-ohms",
@@ -112,7 +123,7 @@ int cs42l43_set_jack(struct snd_soc_component *component,if (ret <0 ) {dev_err (priv->dev,"Property cirrus,button-ohms malformed: %d\n" , ret); - goto error; +return ret; } }else { priv->buttons[0 ] =70 ;
@@ -124,7 +135,7 @@ int cs42l43_set_jack(struct snd_soc_component *component, ret =cs42l43_find_index (priv,"cirrus,detect-us" ,50000 , &priv->detect_us, cs42l43_accdet_us,ARRAY_SIZE (cs42l43_accdet_us));if (ret <0 ) - goto error; +return ret; hs2 |= ret <<CS42L43_AUTO_HSDET_TIME_SHIFT ;
@@ -134,7 +145,7 @@ int cs42l43_set_jack(struct snd_soc_component *component, &priv->bias_ramp_ms, cs42l43_accdet_ramp_ms, ARRAY_SIZE(cs42l43_accdet_ramp_ms));if (ret <0 ) - goto error; +return ret; hs2 |= ret <<CS42L43_HSBIAS_RAMP_SHIFT ;
@@ -142,7 +153,7 @@ int cs42l43_set_jack(struct snd_soc_component *component, &priv->bias_sense_ua, cs42l43_accdet_bias_sense, ARRAY_SIZE(cs42l43_accdet_bias_sense));if (ret <0 ) - goto error; +return ret;if (priv->bias_sense_ua) autocontrol |= ret <<CS42L43_HSBIAS_SENSE_TRIP_SHIFT ;
@@ -154,7 +165,7 @@ int cs42l43_set_jack(struct snd_soc_component *component, &priv->tip_debounce_ms);if (ret <0 && ret != -EINVAL ) {dev_err (priv->dev,"Property cirrus,tip-debounce-ms malformed: %d\n" , ret); - goto error; +return ret; }/* This tip sense invert is set normally, as TIPSENSE_INV already inverted */
@@ -170,7 +181,7 @@ int cs42l43_set_jack(struct snd_soc_component *component, &priv->tip_fall_db_ms, cs42l43_accdet_db_ms, ARRAY_SIZE(cs42l43_accdet_db_ms));if (ret <0 ) - goto error; +return ret; tip_deb |= ret <<CS42L43_TIPSENSE_FALLING_DB_TIME_SHIFT ;
@@ -178,7 +189,7 @@ int cs42l43_set_jack(struct snd_soc_component *component, &priv->tip_rise_db_ms, cs42l43_accdet_db_ms, ARRAY_SIZE(cs42l43_accdet_db_ms));if (ret <0 ) - goto error; +return ret; tip_deb |= ret <<CS42L43_TIPSENSE_RISING_DB_TIME_SHIFT ;
@@ -199,7 +210,7 @@ int cs42l43_set_jack(struct snd_soc_component *component,NULL , cs42l43_accdet_db_ms, ARRAY_SIZE(cs42l43_accdet_db_ms));if (ret <0 ) - goto error; +return ret; ring_deb |= ret <<CS42L43_RINGSENSE_FALLING_DB_TIME_SHIFT ;
@@ -207,7 +218,7 @@ int cs42l43_set_jack(struct snd_soc_component *component,NULL , cs42l43_accdet_db_ms, ARRAY_SIZE(cs42l43_accdet_db_ms));if (ret <0 ) - goto error; +return ret; ring_deb |= ret <<CS42L43_RINGSENSE_RISING_DB_TIME_SHIFT ; pdncntl |=CS42L43_RING_SENSE_EN_MASK ;
@@ -228,9 +239,6 @@ int cs42l43_set_jack(struct snd_soc_component *component,CS42L43_HSBIAS_RAMP_MASK |CS42L43_HSDET_MODE_MASK | CS42L43_AUTO_HSDET_TIME_MASK, hs2); -done: - ret =0 ; -regmap_update_bits (cs42l43->regmap,CS42L43_HS_BIAS_SENSE_AND_CLAMP_AUTOCONTROL ,CS42L43_JACKDET_MODE_MASK |CS42L43_S0_AUTO_ADCMUTE_DISABLE_MASK |CS42L43_HSBIAS_SENSE_TRIP_MASK , autocontrol);
@@ -239,12 +247,7 @@ int cs42l43_set_jack(struct snd_soc_component *component,dev_dbg (priv->dev,"Successfully configured accessory detect\n" ); -error: -mutex_unlock (&priv->jack_lock); - -pm_runtime_put_autosuspend (priv->dev); - -return ret; +return 0 ; }static void cs42l43_start_hs_bias (struct cs42l43_codec *priv,bool type_detect)
@@ -374,17 +377,18 @@ irqreturn_t cs42l43_button_press(int irq, void *data)unsigned int val =0 ;int i, ret; - ret =pm_runtime_resume_and_get (priv->dev); +PM_RUNTIME_ACQUIRE_IF_ENABLED_AUTOSUSPEND (priv->dev, pm); + ret =PM_RUNTIME_ACQUIRE_ERR (&pm);if (ret) {dev_err (priv->dev,"Failed to resume for button press: %d\n" , ret);return iret; } -mutex_lock (&priv->jack_lock); +guard (mutex)(&priv->jack_lock);if (!priv->button_detect_running) {dev_dbg (priv->dev,"Spurious button press IRQ\n" ); - goto error; +return iret; }// Wait for 2 full cycles of comb filter to ensure good reading
@@ -395,12 +399,12 @@ irqreturn_t cs42l43_button_press(int irq, void *data)/* Bail if jack removed, the button is irrelevant and likely invalid */ if (!cs42l43_jack_present (priv)) {dev_dbg (priv->dev,"Button ignored due to removal\n" ); - goto error; +return iret; }if (val &CS42L43_HSBIAS_CLAMP_STS_MASK ) {dev_dbg (priv->dev,"Button ignored due to bias sense\n" ); - goto error; +return iret; } val = (val &CS42L43_HSDET_DC_STS_MASK ) >>CS42L43_HSDET_DC_STS_SHIFT ;
@@ -423,14 +427,7 @@ irqreturn_t cs42l43_button_press(int irq, void *data)snd_soc_jack_report (priv->jack_hp, buttons,CS42L43_JACK_BUTTONS ); - iret =IRQ_HANDLED ; - -error: -mutex_unlock (&priv->jack_lock); - -pm_runtime_put_autosuspend (priv->dev); - -return iret; +return IRQ_HANDLED ; }irqreturn_t cs42l43_button_release (int irq,void *data)
@@ -439,13 +436,14 @@ irqreturn_t cs42l43_button_release(int irq, void *data)irqreturn_t iret =IRQ_NONE ;int ret; - ret =pm_runtime_resume_and_get (priv->dev); +PM_RUNTIME_ACQUIRE_IF_ENABLED_AUTOSUSPEND (priv->dev, pm); + ret =PM_RUNTIME_ACQUIRE_ERR (&pm);if (ret) {dev_err (priv->dev,"Failed to resume for button release: %d\n" , ret);return iret; } -mutex_lock (&priv->jack_lock); +guard (mutex)(&priv->jack_lock);if (priv->button_detect_running) {dev_dbg (priv->dev,"Button release IRQ\n" );
@@ -457,10 +455,6 @@ irqreturn_t cs42l43_button_release(int irq, void *data)dev_dbg (priv->dev,"Spurious button release IRQ\n" ); } -mutex_unlock (&priv->jack_lock); - -pm_runtime_put_autosuspend (priv->dev); -return iret; }
@@ -471,13 +465,14 @@ void cs42l43_bias_sense_timeout(struct work_struct *work)struct cs42l43 *cs42l43 = priv->core;int ret; - ret =pm_runtime_resume_and_get (priv->dev); +PM_RUNTIME_ACQUIRE_IF_ENABLED_AUTOSUSPEND (priv->dev, pm); + ret =PM_RUNTIME_ACQUIRE_ERR (&pm);if (ret) {dev_err (priv->dev,"Failed to resume for bias sense: %d\n" , ret);return ; } -mutex_lock (&priv->jack_lock); +guard (mutex)(&priv->jack_lock);if (cs42l43_jack_present (priv) && priv->button_detect_running) {dev_dbg (priv->dev,"Bias sense timeout out, restore bias\n" );
@@ -490,10 +485,6 @@ void cs42l43_bias_sense_timeout(struct work_struct *work)CS42L43_AUTO_HSBIAS_CLAMP_EN_MASK , CS42L43_AUTO_HSBIAS_CLAMP_EN_MASK); } - -mutex_unlock (&priv->jack_lock); - -pm_runtime_put_autosuspend (priv->dev); }static const struct reg_sequence cs42l43_3pole_patch[] = {
@@ -895,9 +886,8 @@ int cs42l43_jack_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ustruct snd_soc_component *component =snd_kcontrol_chip (kcontrol);struct cs42l43_codec *priv =snd_soc_component_get_drvdata (component); -mutex_lock (&priv->jack_lock); +guard (mutex)(&priv->jack_lock); ucontrol->value.integer.value[0 ] = priv->jack_override; -mutex_unlock (&priv->jack_lock);return 0 ; }
@@ -913,17 +903,13 @@ int cs42l43_jack_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *uif (override >= e->items)return -EINVAL ; -mutex_lock (&priv->jack_lock); +guard (mutex)(&priv->jack_lock); -if (!cs42l43_jack_present (priv)) { -mutex_unlock (&priv->jack_lock); +if (!cs42l43_jack_present (priv))return -EBUSY ; - } -if (override == priv->jack_override) { -mutex_unlock (&priv->jack_lock); +if (override == priv->jack_override)return 0 ; - } priv->jack_override = override;
@@ -983,7 +969,5 @@ int cs42l43_jack_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *u cs42l43_jack_override_modes[override].report); } -mutex_unlock (&priv->jack_lock); -return 1 ; }
sound/soc/codecs/cs42l43.c +5 -11
@@ -8,6 +8,7 @@#include <linux/bitops.h> #include <linux/bits.h> #include <linux/build_bug.h> +#include <linux/cleanup.h> #include <linux/clk.h> #include <linux/device.h> #include <linux/err.h>
@@ -1208,14 +1209,12 @@ static void cs42l43_spk_vu_sync(struct cs42l43_codec *priv) {struct cs42l43 *cs42l43 = priv->core; -mutex_lock (&priv->spk_vu_lock); +guard (mutex)(&priv->spk_vu_lock);regmap_update_bits (cs42l43->regmap,CS42L43_INTP_VOLUME_CTRL1 ,CS42L43_AMP1_2_VU_MASK ,CS42L43_AMP1_2_VU_MASK );regmap_update_bits (cs42l43->regmap,CS42L43_INTP_VOLUME_CTRL1 ,CS42L43_AMP1_2_VU_MASK ,0 ); - -mutex_unlock (&priv->spk_vu_lock); }static int cs42l43_shutter_get (struct cs42l43_codec *priv,unsigned int shift)
@@ -1602,7 +1601,7 @@ static int cs42l43_pll_ev(struct snd_soc_dapm_widget *w,struct cs42l43 *cs42l43 = priv->core;int ret; -mutex_lock (&cs42l43->pll_lock); +guard (mutex)(&cs42l43->pll_lock);switch (event) {case SND_SOC_DAPM_PRE_PMU :
@@ -1627,8 +1626,6 @@ static int cs42l43_pll_ev(struct snd_soc_dapm_widget *w,break ; } -mutex_unlock (&cs42l43->pll_lock); -return ret; }
@@ -2566,13 +2563,10 @@ static int cs42l43_set_sysclk(struct snd_soc_component *component, int clk_id, {struct cs42l43_codec *priv =snd_soc_component_get_drvdata (component);struct cs42l43 *cs42l43 = priv->core; -int ret; -mutex_lock (&cs42l43->pll_lock); - ret =cs42l43_set_pll (priv, src, freq); -mutex_unlock (&cs42l43->pll_lock); +guard (mutex)(&cs42l43->pll_lock); -return ret; +return cs42l43_set_pll (priv, src, freq); }static int cs42l43_component_probe (struct snd_soc_component *component)
Signature · 1 line
2.43.0
Charles Keepax
maintainerRe: [PATCH 15/24] ASoC: codecs: cs42l43: Use guard() and PM runtime scope helpers
Quoted 11 lines · On Fri, Jun 26, 2026 at 01:13:20PM +0700, [email protected] wrote:
From: bui duc phuc <[email protected]>
Convert mutex locking to guard(mutex) and replace explicit runtime PM handling with runtime PM scope helpers.
This simplifies the control flow by removing explicit cleanup paths and unnecessary 'goto' labels.Signed-off-by bui duc phuc <[email protected]>---
sound/soc/codecs/cs42l43-jack.c +0
-2-if (!jack) - goto done;
sound/soc/codecs/cs42l43-jack.c int cs42l43_set_jack(struct snd_soc_component *component, · line 104
Quoted 10 lines
sound/soc/codecs/cs42l43-jack.c +10
-0+if (!jack) { +regmap_update_bits (cs42l43->regmap,CS42L43_HS_BIAS_SENSE_AND_CLAMP_AUTOCONTROL , +CS42L43_JACKDET_MODE_MASK | +CS42L43_S0_AUTO_ADCMUTE_DISABLE_MASK | +CS42L43_HSBIAS_SENSE_TRIP_MASK , autocontrol); +regmap_update_bits (cs42l43->regmap,CS42L43_PDNCNTL , +CS42L43_RING_SENSE_EN_MASK , pdncntl); +dev_dbg (priv->dev,"Successfully configured accessory detect\n" ); + +return 0 ;
I really don't like this duplicating of code blocks, it takes us to a situation we always need to remember to update both blocks in sync which feels like it makes reviewing future patches very error prone.
Thanks,
Charles
Re: [PATCH 15/24] ASoC: codecs: cs42l43: Use guard() and PM runtime scope helpers
Quoted 14 lines
sound/soc/codecs/cs42l43-jack.c int cs42l43_set_jack(struct snd_soc_component *component, · line 104
Quoted 13 lines
---
sound/soc/codecs/cs42l43-jack.c +10
-2-if (!jack) - goto done; +if (!jack) { +regmap_update_bits (cs42l43->regmap,CS42L43_HS_BIAS_SENSE_AND_CLAMP_AUTOCONTROL , +CS42L43_JACKDET_MODE_MASK | +CS42L43_S0_AUTO_ADCMUTE_DISABLE_MASK | +CS42L43_HSBIAS_SENSE_TRIP_MASK , autocontrol); +regmap_update_bits (cs42l43->regmap,CS42L43_PDNCNTL , +CS42L43_RING_SENSE_EN_MASK , pdncntl); +dev_dbg (priv->dev,"Successfully configured accessory detect\n" ); + +return 0 ;
Quoted 5 lines
I really don't like this duplicating of code blocks, it takes us to a situation we always need to remember to update both blocks in sync which feels like it makes reviewing future patches very error prone.
Hi Charles,
I understand your concern about duplicating the code.
My reasoning is that duplicating this block once lets us eliminate 12 goto labels,
which I think makes the overall flow easier to follow. To me, that's a reasonable trade-off.
If you have a cleaner approach that avoids both the duplicated block and the 12 goto labels,
I'd be happy to adopt it.
Best regards,
Phuc
Re: [PATCH 15/24] ASoC: codecs: cs42l43: Use guard() and PM runtime scope helpers
Quoted 30 lines · Bui Duc Phuc
Quoted 15 lines
Quoted 4 lines
---
sound/soc/codecs/cs42l43-jack.c +0
-2-if (!jack) - goto done;sound/soc/codecs/cs42l43-jack.c int cs42l43_set_jack(struct snd_soc_component *component, · line 104
Quoted 10 lines
sound/soc/codecs/cs42l43-jack.c +10
-0+if (!jack) { +regmap_update_bits (cs42l43->regmap,CS42L43_HS_BIAS_SENSE_AND_CLAMP_AUTOCONTROL , +CS42L43_JACKDET_MODE_MASK | +CS42L43_S0_AUTO_ADCMUTE_DISABLE_MASK | +CS42L43_HSBIAS_SENSE_TRIP_MASK , autocontrol); +regmap_update_bits (cs42l43->regmap,CS42L43_PDNCNTL , +CS42L43_RING_SENSE_EN_MASK , pdncntl); +dev_dbg (priv->dev,"Successfully configured accessory detect\n" ); + +return 0 ;Quoted 5 lines
I really don't like this duplicating of code blocks, it takes us to a situation we always need to remember to update both blocks in sync which feels like it makes reviewing future patches very error prone.
Hi Charles,
I understand your concern about duplicating the code.
My reasoning is that duplicating this block once lets us eliminate 12
gotolabels,
which I think makes the overall flow easier to follow. To me, that's a reasonable trade-off.
Quoted 6 lines
If you have a cleaner approach that avoids both the duplicated block and the 12
gotolabels,
I'd be happy to adopt it.Best regards,
Phuc
Hi Charles,
I'll factor the duplicated code into a helper and use it from both paths in v2, for example:
static void cs42l43_apply_accdet_config(struct cs42l43_codec *priv,
unsigned int autocontrol, unsigned int pdncntl)
{
struct cs42l43 *cs42l43 = priv->core;
regmap_update_bits(cs42l43->regmap,
CS42L43_HS_BIAS_SENSE_AND_CLAMP_AUTOCONTROL,
CS42L43_JACKDET_MODE_MASK |
CS42L43_S0_AUTO_ADCMUTE_DISABLE_MASK |
CS42L43_HSBIAS_SENSE_TRIP_MASK, autocontrol);
regmap_update_bits(cs42l43->regmap, CS42L43_PDNCNTL,
CS42L43_RING_SENSE_EN_MASK, pdncntl);
dev_dbg(priv->dev, "Successfully configured accessory detect\n");
}Then both paths can simply call cs42l43_apply_accdet_config(), avoiding the duplicated code.
Does that address your concern?
Best regards,
Phuc
Charles Keepax
maintainerRe: [PATCH 15/24] ASoC: codecs: cs42l43: Use guard() and PM runtime scope helpers
Quoted 20 lines · Bui Duc Phuc
On Fri, Jun 26, 2026 at 7:57 PM Bui Duc Phuc <[email protected]> wrote:
I'll factor the duplicated code into a helper and use it from both paths in v2, for example:static void cs42l43_apply_accdet_config(struct
cs42l43_codec*priv,
unsigned int autocontrol, unsigned int pdncntl){ struct cs42l43 *cs42l43 = priv->core; regmap_update_bits(cs42l43->regmap, CS42L43_HS_BIAS_SENSE_AND_CLAMP_AUTOCONTROL, CS42L43_JACKDET_MODE_MASK | CS42L43_S0_AUTO_ADCMUTE_DISABLE_MASK | CS42L43_HSBIAS_SENSE_TRIP_MASK, autocontrol); regmap_update_bits(cs42l43->regmap, CS42L43_PDNCNTL, CS42L43_RING_SENSE_EN_MASK, pdncntl); dev_dbg(priv->dev, "Successfully configured accessory detect\n"); }
Quoted 3 lines
Then both paths can simply call
cs42l43_apply_accdet_config(), avoiding the duplicated code.
Does that address your concern?
Yeah I guess that is probably the best way to go.
Thanks,
Charles
Re: [PATCH 15/24] ASoC: codecs: cs42l43: Use guard() and PM runtime scope helpers
Hi Charles,
Thank you for your review.
Quoted 3 lines
Yeah I guess that is probably the best way to go.
I've sent a v2 addressing the comments.
https://lore.kernel.org/all/[email protected]/
Could you please take a look and review it as well?
If there are any remaining issues, I'll address them and send a v3.
Best regards,
Phuc
PATCH 16/24 ASoC: codecs: cs42l84: Use guard() for mutex locks
In reply to [email protected]From: bui duc phuc <[email protected]>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
--- sound/soc/codecs/cs42l84.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-)
sound/soc/codecs/cs42l84.c +3 -7
@@ -10,6 +10,7 @@#include <linux/bitfield.h> #include <linux/bits.h> +#include <linux/cleanup.h> #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/kernel.h>
@@ -281,10 +282,9 @@ static int cs42l84_set_jack(struct snd_soc_component *component, struct snd_soc_struct cs42l84_private *cs42l84 =snd_soc_component_get_drvdata (component);/* Prevent race with interrupt handler */ -mutex_lock (&cs42l84->irq_lock); +guard (mutex)(&cs42l84->irq_lock); cs42l84->jack = jk;snd_soc_jack_report (jk, cs42l84->hs_type,SND_JACK_HEADSET ); -mutex_unlock (&cs42l84->irq_lock);return 0 ; }
@@ -831,7 +831,7 @@ static irqreturn_t cs42l84_irq_thread(int irq, void *data)u8 current_ring_state;int i; -mutex_lock (&cs42l84->irq_lock); +guard (mutex)(&cs42l84->irq_lock);/* Read sticky registers to clear interrupt */ for (i =0 ; i <ARRAY_SIZE (stickies); i++) { regmap_read(cs42l84->regmap, irq_params_table[i].status_addr,
@@ -902,8 +902,6 @@ static irqreturn_t cs42l84_irq_thread(int irq, void *data)break ; } -mutex_unlock (&cs42l84->irq_lock); -return IRQ_HANDLED ; }
@@ -919,8 +917,6 @@ static irqreturn_t cs42l84_irq_thread(int irq, void *data) } } -mutex_unlock (&cs42l84->irq_lock); -return IRQ_HANDLED ; }
Signature · 1 line
2.43.0
Re: [PATCH 16/24] ASoC: codecs: cs42l84: Use guard() for mutex locks
Quoted 7 lines · On Fri, Jun 26, 2026 at 01:13:21PM +0700, [email protected] wrote:
From: bui duc phuc <[email protected]>
Clean up the code using
guard()for mutex locks.
Merely code refactoring, and no behavior change.Signed-off-by bui duc phuc <[email protected]>---
Thanks,
Charles
PATCH 17/24 ASoC: codecs: cs43130: Use guard() for mutex locks
In reply to [email protected]From: bui duc phuc <[email protected]>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
--- sound/soc/codecs/cs43130.c | 72 +++++++++++++++++++------------------- 1 file changed, 36 insertions(+), 36 deletions(-)
sound/soc/codecs/cs43130.c +36 -36
@@ -6,6 +6,7 @@* * Authors: Li Xu <[email protected]> */ +#include <linux/cleanup.h> #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/kernel.h>
@@ -818,26 +819,26 @@ static int cs43130_dsd_hw_params(struct snd_pcm_substream *substream,unsigned int required_clk;u8 dsd_speed; -mutex_lock (&cs43130->clk_mutex); -if (!cs43130->clk_req) { -/* no DAI is currently using clk */ -if (!(CS43130_MCLK_22M %params_rate (params))) - required_clk =CS43130_MCLK_22M ; -else - required_clk =CS43130_MCLK_24M ; + scoped_guard(mutex, &cs43130->clk_mutex) { +if (!cs43130->clk_req) { +/* no DAI is currently using clk */ +if (!(CS43130_MCLK_22M %params_rate (params))) + required_clk =CS43130_MCLK_22M ; +else + required_clk =CS43130_MCLK_24M ; + +cs43130_set_pll (component,0 ,0 , cs43130->mclk, required_clk); +if (cs43130->pll_bypass) +cs43130_change_clksrc (component,CS43130_MCLK_SRC_EXT ); +else +cs43130_change_clksrc (component,CS43130_MCLK_SRC_PLL ); + } -cs43130_set_pll (component,0 ,0 , cs43130->mclk, required_clk); -if (cs43130->pll_bypass) -cs43130_change_clksrc (component,CS43130_MCLK_SRC_EXT ); -else -cs43130_change_clksrc (component,CS43130_MCLK_SRC_PLL ); + cs43130->clk_req++; +if (cs43130->clk_req ==2 ) +cs43130_pcm_dsd_mix (true, cs43130->regmap); } - cs43130->clk_req++; -if (cs43130->clk_req ==2 ) -cs43130_pcm_dsd_mix (true, cs43130->regmap); -mutex_unlock (&cs43130->clk_mutex); -switch (params_rate (params)) {case 176400 : dsd_speed =0 ;
@@ -881,26 +882,26 @@ static int cs43130_hw_params(struct snd_pcm_substream *substream,unsigned int required_clk;u8 dsd_speed; -mutex_lock (&cs43130->clk_mutex); -if (!cs43130->clk_req) { -/* no DAI is currently using clk */ -if (!(CS43130_MCLK_22M %params_rate (params))) - required_clk =CS43130_MCLK_22M ; -else - required_clk =CS43130_MCLK_24M ; + scoped_guard(mutex, &cs43130->clk_mutex) { +if (!cs43130->clk_req) { +/* no DAI is currently using clk */ +if (!(CS43130_MCLK_22M %params_rate (params))) + required_clk =CS43130_MCLK_22M ; +else + required_clk =CS43130_MCLK_24M ; + +cs43130_set_pll (component,0 ,0 , cs43130->mclk, required_clk); +if (cs43130->pll_bypass) +cs43130_change_clksrc (component,CS43130_MCLK_SRC_EXT ); +else +cs43130_change_clksrc (component,CS43130_MCLK_SRC_PLL ); + } -cs43130_set_pll (component,0 ,0 , cs43130->mclk, required_clk); -if (cs43130->pll_bypass) -cs43130_change_clksrc (component,CS43130_MCLK_SRC_EXT ); -else -cs43130_change_clksrc (component,CS43130_MCLK_SRC_PLL ); + cs43130->clk_req++; +if (cs43130->clk_req ==2 ) +cs43130_pcm_dsd_mix (true, cs43130->regmap); } - cs43130->clk_req++; -if (cs43130->clk_req ==2 ) -cs43130_pcm_dsd_mix (true, cs43130->regmap); -mutex_unlock (&cs43130->clk_mutex); -switch (dai->id) {case CS43130_ASP_DOP_DAI :case CS43130_XSP_DOP_DAI :
@@ -988,14 +989,13 @@ static int cs43130_hw_free(struct snd_pcm_substream *substream,struct snd_soc_component *component = dai->component;struct cs43130_private *cs43130 =snd_soc_component_get_drvdata (component); -mutex_lock (&cs43130->clk_mutex); +guard (mutex)(&cs43130->clk_mutex); cs43130->clk_req--;if (!cs43130->clk_req) {/* no DAI is currently using clk */ cs43130_change_clksrc (component,CS43130_MCLK_SRC_RCO );cs43130_pcm_dsd_mix (false, cs43130->regmap); } -mutex_unlock (&cs43130->clk_mutex);return 0 ; }
Signature · 1 line
2.43.0
PATCH 18/24 ASoC: codecs: cs47l15: Use guard() for mutex locks
In reply to [email protected]From: bui duc phuc <[email protected]>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
--- sound/soc/codecs/cs47l15.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-)
sound/soc/codecs/cs47l15.c +5 -6
@@ -6,6 +6,7 @@// Cirrus Logic International Semiconductor Ltd. // +#include <linux/cleanup.h> #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/device.h>
@@ -1285,9 +1286,8 @@ static int cs47l15_component_probe(struct snd_soc_component *component)snd_soc_component_init_regmap (component, madera->regmap); -mutex_lock (&madera->dapm_ptr_lock); - madera->dapm =snd_soc_component_to_dapm (component); -mutex_unlock (&madera->dapm_ptr_lock); +scoped_guard (mutex, &madera->dapm_ptr_lock) + madera->dapm = snd_soc_component_to_dapm(component); ret =madera_init_inputs (component);if (ret)
@@ -1317,9 +1317,8 @@ static void cs47l15_component_remove(struct snd_soc_component *component)struct cs47l15 *cs47l15 =snd_soc_component_get_drvdata (component);struct madera *madera = cs47l15->core.madera; -mutex_lock (&madera->dapm_ptr_lock); - madera->dapm =NULL ; -mutex_unlock (&madera->dapm_ptr_lock); +scoped_guard (mutex, &madera->dapm_ptr_lock) + madera->dapm = NULL;wm_adsp2_component_remove (&cs47l15->core.adsp[0 ], component); }
Signature · 1 line
2.43.0
Re: [PATCH 18/24] ASoC: codecs: cs47l15: Use guard() for mutex locks
Quoted 7 lines · On Fri, Jun 26, 2026 at 01:13:23PM +0700, [email protected] wrote:
From: bui duc phuc <[email protected]>
Clean up the code using
guard()for mutex locks.
Merely code refactoring, and no behavior change.Signed-off-by bui duc phuc <[email protected]>---
Thanks,
Charles
PATCH 19/24 ASoC: codecs: cs47l35: Use guard() for mutex locks
In reply to [email protected]From: bui duc phuc <[email protected]>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
--- sound/soc/codecs/cs47l35.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-)
sound/soc/codecs/cs47l35.c +5 -6
@@ -6,6 +6,7 @@// Cirrus Logic International Semiconductor Ltd. // +#include <linux/cleanup.h> #include <linux/delay.h> #include <linux/device.h> #include <linux/init.h>
@@ -1566,9 +1567,8 @@ static int cs47l35_component_probe(struct snd_soc_component *component)snd_soc_component_init_regmap (component, madera->regmap); -mutex_lock (&madera->dapm_ptr_lock); - madera->dapm =snd_soc_component_to_dapm (component); -mutex_unlock (&madera->dapm_ptr_lock); +scoped_guard (mutex, &madera->dapm_ptr_lock) + madera->dapm = snd_soc_component_to_dapm(component); ret =madera_init_inputs (component);if (ret)
@@ -1600,9 +1600,8 @@ static void cs47l35_component_remove(struct snd_soc_component *component)struct madera *madera = cs47l35->core.madera;int i; -mutex_lock (&madera->dapm_ptr_lock); - madera->dapm =NULL ; -mutex_unlock (&madera->dapm_ptr_lock); +scoped_guard (mutex, &madera->dapm_ptr_lock) + madera->dapm = NULL;for (i =0 ; i <CS47L35_NUM_ADSP ; i++)wm_adsp2_component_remove (&cs47l35->core.adsp[i], component);
Signature · 1 line
2.43.0
Re: [PATCH 19/24] ASoC: codecs: cs47l35: Use guard() for mutex locks
Quoted 7 lines · On Fri, Jun 26, 2026 at 01:13:24PM +0700, [email protected] wrote:
From: bui duc phuc <[email protected]>
Clean up the code using
guard()for mutex locks.
Merely code refactoring, and no behavior change.Signed-off-by bui duc phuc <[email protected]>---
Thanks,
Charles
PATCH 20/24 ASoC: codecs: cs47l85: Use guard() for mutex locks
In reply to [email protected]From: bui duc phuc <[email protected]>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
--- sound/soc/codecs/cs47l85.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-)
sound/soc/codecs/cs47l85.c +5 -6
@@ -6,6 +6,7 @@// Cirrus Logic International Semiconductor Ltd. // +#include <linux/cleanup.h> #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/device.h>
@@ -2504,9 +2505,8 @@ static int cs47l85_component_probe(struct snd_soc_component *component)snd_soc_component_init_regmap (component, madera->regmap); -mutex_lock (&madera->dapm_ptr_lock); - madera->dapm =snd_soc_component_to_dapm (component); -mutex_unlock (&madera->dapm_ptr_lock); +scoped_guard (mutex, &madera->dapm_ptr_lock) + madera->dapm = snd_soc_component_to_dapm(component); ret =madera_init_inputs (component);if (ret)
@@ -2537,9 +2537,8 @@ static void cs47l85_component_remove(struct snd_soc_component *component)struct madera *madera = cs47l85->core.madera;int i; -mutex_lock (&madera->dapm_ptr_lock); - madera->dapm =NULL ; -mutex_unlock (&madera->dapm_ptr_lock); +scoped_guard (mutex, &madera->dapm_ptr_lock) + madera->dapm = NULL;for (i =0 ; i <CS47L85_NUM_ADSP ; i++)wm_adsp2_component_remove (&cs47l85->core.adsp[i], component);
Signature · 1 line
2.43.0
Re: [PATCH 20/24] ASoC: codecs: cs47l85: Use guard() for mutex locks
Quoted 7 lines · On Fri, Jun 26, 2026 at 01:13:25PM +0700, [email protected] wrote:
From: bui duc phuc <[email protected]>
Clean up the code using
guard()for mutex locks.
Merely code refactoring, and no behavior change.Signed-off-by bui duc phuc <[email protected]>---
Thanks,
Charles
PATCH 21/24 ASoC: codecs: cs47l90: Use guard() for mutex locks
In reply to [email protected]From: bui duc phuc <[email protected]>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
--- sound/soc/codecs/cs47l90.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-)
sound/soc/codecs/cs47l90.c +5 -6
@@ -6,6 +6,7 @@// Cirrus Logic International Semiconductor Ltd. // +#include <linux/cleanup.h> #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/device.h>
@@ -2423,9 +2424,8 @@ static int cs47l90_component_probe(struct snd_soc_component *component)snd_soc_component_init_regmap (component, madera->regmap); -mutex_lock (&madera->dapm_ptr_lock); - madera->dapm =snd_soc_component_to_dapm (component); -mutex_unlock (&madera->dapm_ptr_lock); +scoped_guard (mutex, &madera->dapm_ptr_lock) + madera->dapm = snd_soc_component_to_dapm(component); ret =madera_init_inputs (component);if (ret)
@@ -2456,9 +2456,8 @@ static void cs47l90_component_remove(struct snd_soc_component *component)struct madera *madera = cs47l90->core.madera;int i; -mutex_lock (&madera->dapm_ptr_lock); - madera->dapm =NULL ; -mutex_unlock (&madera->dapm_ptr_lock); +scoped_guard (mutex, &madera->dapm_ptr_lock) + madera->dapm = NULL;for (i =0 ; i <CS47L90_NUM_ADSP ; i++)wm_adsp2_component_remove (&cs47l90->core.adsp[i], component);
Signature · 1 line
2.43.0
Re: [PATCH 21/24] ASoC: codecs: cs47l90: Use guard() for mutex locks
Quoted 7 lines · On Fri, Jun 26, 2026 at 01:13:26PM +0700, [email protected] wrote:
From: bui duc phuc <[email protected]>
Clean up the code using
guard()for mutex locks.
Merely code refactoring, and no behavior change.Signed-off-by bui duc phuc <[email protected]>---
Thanks,
Charles
PATCH 22/24 ASoC: codecs: cs47l92: Use guard() for mutex locks
In reply to [email protected]From: bui duc phuc <[email protected]>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
--- sound/soc/codecs/cs47l92.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-)
sound/soc/codecs/cs47l92.c +5 -6
@@ -6,6 +6,7 @@// Cirrus Logic International Semiconductor Ltd. // +#include <linux/cleanup.h> #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/device.h>
@@ -1892,9 +1893,8 @@ static int cs47l92_component_probe(struct snd_soc_component *component)snd_soc_component_init_regmap (component, madera->regmap); -mutex_lock (&madera->dapm_ptr_lock); - madera->dapm =snd_soc_component_to_dapm (component); -mutex_unlock (&madera->dapm_ptr_lock); +scoped_guard (mutex, &madera->dapm_ptr_lock) + madera->dapm = snd_soc_component_to_dapm(component); ret =madera_init_inputs (component);if (ret)
@@ -1922,9 +1922,8 @@ static void cs47l92_component_remove(struct snd_soc_component *component)struct cs47l92 *cs47l92 =snd_soc_component_get_drvdata (component);struct madera *madera = cs47l92->core.madera; -mutex_lock (&madera->dapm_ptr_lock); - madera->dapm =NULL ; -mutex_unlock (&madera->dapm_ptr_lock); +scoped_guard (mutex, &madera->dapm_ptr_lock) + madera->dapm = NULL;wm_adsp2_component_remove (&cs47l92->core.adsp[0 ], component); }
Signature · 1 line
2.43.0
Re: [PATCH 22/24] ASoC: codecs: cs47l92: Use guard() for mutex locks
Quoted 7 lines · On Fri, Jun 26, 2026 at 01:13:27PM +0700, [email protected] wrote:
From: bui duc phuc <[email protected]>
Clean up the code using
guard()for mutex locks.
Merely code refactoring, and no behavior change.Signed-off-by bui duc phuc <[email protected]>---
Thanks,
Charles
PATCH 23/24 ASoC: codecs: cs48l32: Use guard() for mutex locks
In reply to [email protected]From: bui duc phuc <[email protected]>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
--- sound/soc/codecs/cs48l32.c | 29 +++++++++++++---------------- 1 file changed, 13 insertions(+), 16 deletions(-)
sound/soc/codecs/cs48l32.c +13 -16
@@ -8,6 +8,7 @@#include <dt-bindings/sound/cs48l32.h> #include <linux/array_size.h> #include <linux/build_bug.h> +#include <linux/cleanup.h> #include <linux/clk.h> #include <linux/container_of.h> #include <linux/delay.h>
@@ -236,15 +237,13 @@ static int cs48l32_rate_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_vint ret;/* Prevent any mixer mux changes while we do this */ -mutex_lock (&cs48l32_codec->rate_lock); +guard (mutex)(&cs48l32_codec->rate_lock);/* The write must be guarded by a number of SYSCLK cycles */ cs48l32_spin_sysclk (cs48l32_codec); ret =snd_soc_put_enum_double (kcontrol, ucontrol);cs48l32_spin_sysclk (cs48l32_codec); -mutex_unlock (&cs48l32_codec->rate_lock); -return ret; }
@@ -2242,7 +2241,6 @@ static int cs48l32_dai_set_sysclk(struct snd_soc_dai *dai,struct cs48l32_dai_priv *dai_priv = &cs48l32_codec->dai[dai->id -1 ];unsigned int base = dai->driver->base;unsigned int current_asp_rate, target_asp_rate; -bool change_rate_domain = false;int ret;if (clk_id == dai_priv->clk)
@@ -2284,19 +2282,18 @@ static int cs48l32_dai_set_sysclk(struct snd_soc_dai *dai,if ((current_asp_rate &CS48L32_ASP_RATE_MASK ) != (target_asp_rate &CS48L32_ASP_RATE_MASK )) { - change_rate_domain = true; - -mutex_lock (&cs48l32_codec->rate_lock);/* Guard the rate change with SYSCLK cycles */ -cs48l32_spin_sysclk (cs48l32_codec); - } - -snd_soc_component_update_bits (component, base +CS48L32_ASP_CONTROL1 , -CS48L32_ASP_RATE_MASK , target_asp_rate); - -if (change_rate_domain) { -cs48l32_spin_sysclk (cs48l32_codec); -mutex_unlock (&cs48l32_codec->rate_lock); + scoped_guard(mutex, &cs48l32_codec->rate_lock) { +cs48l32_spin_sysclk (cs48l32_codec); +snd_soc_component_update_bits (component, + base +CS48L32_ASP_CONTROL1 , +CS48L32_ASP_RATE_MASK , + target_asp_rate); +cs48l32_spin_sysclk (cs48l32_codec); + } + }else { +snd_soc_component_update_bits (component, base +CS48L32_ASP_CONTROL1 , +CS48L32_ASP_RATE_MASK , target_asp_rate); } }
Signature · 1 line
2.43.0
Charles Keepax
maintainerRe: [PATCH 23/24] ASoC: codecs: cs48l32: Use guard() for mutex locks
Quoted 14 lines · On Fri, Jun 26, 2026 at 01:13:28PM +0700, [email protected] wrote:
From: bui duc phuc <[email protected]>
Clean up the code using
guard()for mutex locks.
Merely code refactoring, and no behavior change.Signed-off-by bui duc phuc <[email protected]>---
sound/soc/codecs/cs48l32.c +1
-6-snd_soc_component_update_bits (component, base +CS48L32_ASP_CONTROL1 , -CS48L32_ASP_RATE_MASK , target_asp_rate); - -if (change_rate_domain) { -cs48l32_spin_sysclk (cs48l32_codec); -mutex_unlock (&cs48l32_codec->rate_lock); + scoped_guard(mutex, &cs48l32_codec->rate_lock) {
sound/soc/codecs/cs48l32.c static int cs48l32_dai_set_sysclk(struct snd_soc_dai *dai, · line 2296
Quoted 10 lines
sound/soc/codecs/cs48l32.c +10
-0+cs48l32_spin_sysclk (cs48l32_codec); +snd_soc_component_update_bits (component, + base +CS48L32_ASP_CONTROL1 , +CS48L32_ASP_RATE_MASK , + target_asp_rate); +cs48l32_spin_sysclk (cs48l32_codec); + } + }else { +snd_soc_component_update_bits (component, base +CS48L32_ASP_CONTROL1 , +CS48L32_ASP_RATE_MASK , target_asp_rate);
We can just drop this second write, update_bits won't do a write if the bits don't change and we know they won't from the read earlier. The original code was a bit odd, but might as well clean it up whilst we are shuffling this all around.
Thanks,
Charles
Re: [PATCH 23/24] ASoC: codecs: cs48l32: Use guard() for mutex locks
Quoted 27 lines · Charles Keepax
Quoted 14 lines · On Fri, Jun 26, 2026 at 01:13:28PM +0700, [email protected] wrote:
From: bui duc phuc <[email protected]>
Clean up the code using
guard()for mutex locks.
Merely code refactoring, and no behavior change.Signed-off-by bui duc phuc <[email protected]>---
sound/soc/codecs/cs48l32.c +1
-6-snd_soc_component_update_bits (component, base +CS48L32_ASP_CONTROL1 , -CS48L32_ASP_RATE_MASK , target_asp_rate); - -if (change_rate_domain) { -cs48l32_spin_sysclk (cs48l32_codec); -mutex_unlock (&cs48l32_codec->rate_lock); + scoped_guard(mutex, &cs48l32_codec->rate_lock) {sound/soc/codecs/cs48l32.c static int cs48l32_dai_set_sysclk(struct snd_soc_dai *dai, · line 2296
Quoted 10 lines
sound/soc/codecs/cs48l32.c +10
-0+cs48l32_spin_sysclk (cs48l32_codec); +snd_soc_component_update_bits (component, + base +CS48L32_ASP_CONTROL1 , +CS48L32_ASP_RATE_MASK , + target_asp_rate); +cs48l32_spin_sysclk (cs48l32_codec); + } + }else { +snd_soc_component_update_bits (component, base +CS48L32_ASP_CONTROL1 , +CS48L32_ASP_RATE_MASK , target_asp_rate);
Quoted 5 lines
We can just drop this second write,
update_bitswon't do a write if the bits don't change and we know they won't from the read earlier. The original code was a bit odd, but might as well clean it up whilst we are shuffling this all around.
Hi Charles,
I understand.
I'll remove that else block in v2.
Best regards,
Phuc
PATCH 24/24 ASoC: codecs: cs2072x: Use guard() for mutex locks
In reply to [email protected]From: bui duc phuc <[email protected]>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
--- sound/soc/codecs/cx2072x.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
sound/soc/codecs/cx2072x.c +2 -3
@@ -9,6 +9,7 @@// #include <linux/acpi.h> +#include <linux/cleanup.h> #include <linux/clk.h> #include <linux/delay.h> #include <linux/gpio.h>
@@ -1408,7 +1409,7 @@ static int cx2072x_jack_status_check(void *data)unsigned int type =0 ;int state =0 ; -mutex_lock (&cx2072x->lock); +guard (mutex)(&cx2072x->lock);regmap_read (cx2072x->regmap,CX2072X_PORTA_PIN_SENSE , &jack); jack = jack >>24 ;
@@ -1434,8 +1435,6 @@ static int cx2072x_jack_status_check(void *data)/* clear interrupt */ regmap_write (cx2072x->regmap,CX2072X_UM_INTERRUPT_CRTL_E ,0x12 <<24 ); -mutex_unlock (&cx2072x->lock); -dev_dbg (codec->dev,"CX2072X_HSDETECT type=0x%X,Jack state = %x\n" , type, state);return state;
Signature · 1 line
2.43.0